Quality has a new name
NBM 200
Non-invasive Hemoglobin Testing
The NBM 200 is a non-invasive monitor for spot
Features & Specifications
testing of blood Hemoglobin (Hb) values. It
consists of a reusable ring shaped sensor that is
placed on the donor's finger, and a portable
desktop monitor that displays the measurement
results in less than 60 seconds. It may be used for
Hemoglobin (Hb)
Hb measurement range: 6-18g/dL
Precision:
1g/dL (standard deviation)
Resolution:
0.1 d/dL
environments, blood & plasma collection centers,
Pulse Rate (PR):
Range:
Accuracy:
30-240 bPm
3bPm
primary care, maternity and other physician's
Mode of operation
Spot checking
offices.
The technology combines a sensitive optical
Data management
Data logger with real time and date.
The measured Hb values are
automatically stored.
Multilingual data interface.
anemia
testing
measurement
in
with
clinical
and
temporary
non-clinical
blood-flow
occlusion using a pneumatic finger sensor cuff. The
occluded blood generates a unique and strong
optical
signal,
enabling
highly
sensitive
Electrical
Consumption (typical):
Input voltage range:
measurement of analytes.
The NBM 200 represents a breakthrough in noninvasive blood constituents measurements, while
greatly improving donor comfort and safety,
minimizing infection risks and providing accurate
and immediate results at point of care.
Lmb's proprietary technology offers a unique
Type of protection
12 watts
100 to 240 VAC, 50-60 Hz
Operates on mains power or 4 AA
1.5V batteries, or an optional
internal Li-ion rechargeable battery
(capable of continuous operation for
up to 300 tests)
Class 1 (on AC Power) Type BF
applied part
Environmental
Operating temperature:
Storage:
Humidity:
Operating Altitude:
0 to 40 °C (32 to 105 °F)
-40 to + 70 °C (-40 to 158 °F)
5%-95% non-condensing
-370m to 5486m
for testing millions of patients and blood donors in
Protection
IP42 against drip and foreign bodies
Europe, U.S., Latin America and Asia. It exhibits
Compliance with
STANDARDS
breakthrough solution for Hemoglobin (Hb) testing
at point-of-care, that is suited for use in a variety
of clinical or non-clinical, fixed or mobile settings.
The FDA & CE approved technology has been used
accuracy comparable to invasive point of care
solutions while demonstrating clear superiority in
EMC compliance:
IEC/EN 60601-1, CSA 601.1, IEC/EN
62304, MDD 93/42/EEC
IEC/EN 60601-1-2, Class B
safety, cost effectiveness and ease of use.
Sensor emitted light LED
LED wavelength range: 600-940 nm
Average radiated power: s1 mw
Lmb Technologie GmbH
Möslstr. 17
D-85445 Schwaig
Tel: +49 - 8122 - 880 96 - 0
Fax:+49 - 8122 - 880 96 - 60
www.lmb.de
info@lmb.de
Calibration
Factory calibrated over the range of
6 - 18 g/dL of Hb
Physical characteristics
Dimensions:
7.5cm(H) x 22.5cm(W) x 18cm(D)
3" x 10" x 9" x 7.1"
Weight:
1 kg (2.2lb)
Quality has a new name
NBM 200
Non-invasive Measurement of Hemoglobin
NBM 200 Benefits
Donor Comfort
No Pain
No Blood
Increase in Donors Returns
Easy & Safe to Use
Infection Free
Hands Free
Clutter Free Table
Reliable Anemia Screening
Immediate Results
Environmentally Friendly
No Disposables
NBM 200 Hemoglobin measurements compared
with reference measurements (Coulter LH750)
NBM 200 Hb [g/dL]
20
16
12
8
4
20
Lmb Technologie GmbH
Möslstr. 17
D-85445 Schwaig
Reference Hb [g/dL]
Hospital patients data (n=1304), precision 0.96 g/dL, correlation 0.89
Tel: +49 - 8122 - 880 96 - 0
Fax:+49 - 8122 - 880 96 - 60
4
8
12
16
www.lmb.de
info@lmb.de