Ordering/Part Number Information

advertisement
Type 715P/716P
Polypropylene Film/Foil Capacitors
SBE
Ordering/Part Number Information
715P
222
5
6
J
D
3
(XXXX)
A suffix may be added by
the factory to denote special
construction.
Lead Length 1 = 0.187 (4.7) ±0.030 (0.8)
2 = 0.250 (6.4) ±0.030 (0.8)
3 = 1.250 (32.0) Minimum
(Other lead lengths available)
Terminal A = Straight Lead (1.25 Min. lead length)
B,F = Hairpin Crimp
C = Captive Crimp 1
D,G,H = Hockey Stick Crimp
Case Code See Standard Sizes/Ratings Table
Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%; 2 = ±2%; 1 = ±1%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following, (i.e. 222 = 2200 pF = .0022 µF)
SBE Type Number
Identifies the basic capacitor design.
715P Round profile, 716P Pressed profile
1
Terminal C has a fixed lead length of 0.156 (4.0) ±0.020 (0.5), therefore it is not necessary to indicate the lead
length digit when ordering. Available for "L" case code parts only
Please note:
While it is not possible to list every capacitance value, tolerance, or design/size variation available,
our flexibility in design and manufacturing gives us the ability to quickly, and cost effectively, provide
you with the capacitor you require. Please contact us today with your specific needs!
Dimensions in inches, metric (mm) in parenthesis.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
23
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 715P/716P
Polypropylene
D-C Voltage Rating Expressed in Hundreds of Volts
Type 715P/716P
Polypropylene Film/Foil Capacitors
SBE
General Specifications
The 715P and 716P series are manufactured with polypropylene film and extended foil. Polypropylene has a very
low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability. These characteristics
combined with the direct connection of the lead wire to the extended foil electrode makes the 715P and 716P
series ideal for high current, high pulse applications.
The 715P series has a round profile and is available in tolerances as close as ±1%. The 716P series has a pressed
profile and, in addition, is designed with copper leads, thus adding to it's performance in high frequency, high
pulse current applications.
Other specifications are listed below and on the following pages.
Humidity Testing:
Type 715P/716P
Polypropylene
Operating Temperature Range:
The standard operating temperature range for
polypropylene film is -55°C to +85°C. The
715P and 716P may be operated up to +105°C
provided the DC working voltage is reduced
by 50%.
Units subjected to 95% relative humidity for 72
hours with no voltage applied at +75°C. After 4
hours of drying minimum product of insulation
resistance and capacitance shall be 50,000 megohmmicrofarads.
For specific derating of the AC voltage when
operating above +85°C please contact our
design engineering department.
DC Voltage Life Test:
Minimum of 500 hours at +85°C at 150% of rated
voltage. After test, capacitance shall not have
changed by more than 3%, insulation resistance shall
not have decreased by more than 25% and dissipation
factor shall not have changed by more than 0.03%.
Measurements made at 1 KHz.
The maximum operating temperature for 715P
and 716P polypropylene film capacitors is
+ 105°C.
Dielectric Withstanding Voltage:
AC Voltage Life Test:
Units rated below 800 VDC shall withstand
a DC potential of 250% of rated voltage applied
between terminals for not more than 5 seconds;
units rated 800 VDC and above shall withstand
200% of rated voltage.
Minimum of 500 hours at +85°C at 60 Hz. AC test
voltage applied at 110% of AC rating. After test,
capacitance shall not have changed by more than 3%,
insulation resistance shall not have decreased by
more than 25%, and dissipation factor shall not have
changed by more than 0.03%. Measurements made
at 1 KHz.
Construction:
Units rated 100 through 600 VDC are single
section designs constructed of plain polypropylene
film with extended foil. Units rated 800 VDC
and above are series-section designs with extended
foil and incorporate a floating common of
metallized polypropylene. All units are noninductively wound.
Additional notes on Life Testing:
SBE performs standard 500 hour accelerated life tests,
both DC and line frequency AC, to monitor process
control over our wide range of products.
We also perform longer term life testing, typically 2000
hours, during development of most products. In
addition we do accelerated life testing at 10-250 KHz
for our High Performance AC products. For additional
life test information please contact us.
Temperature Coefficient:
The typical temperature coefficient is -180 ppm/°C
over the temperature range of -55°C to +85°C.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
24
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Type 716P Orange Drop®
High Performance
Polypropylene Film/Foil
Capacitors
Features
• Copper leads.
• Extremely low dissipation factor.
• Superb high frequency response.
• Excellent stability, virtually linear
temperature coefficient.
Insulation Resistance:
400,000 M⍀ minimum at +25°C
20,000 M⍀ minimum at +85°C
2,000 M⍀ minimum at +105°C
• Various lead spacings, crimp styles
and lead lengths available.
Pulse Rise Time, dV/dt:
Specifications
See tabulated data.
See tabulated data.
220 pF to 1.0 µF
Encapsulation:
Capacitance Tolerance:
Conformal coating of flame retardant orange
epoxy (meets UL94V-2 specifications)
±3% to ±10%
Voltage Ratings:
100 to 2000 Volts D-C
70 to 500 Volts A-C
Dielectric:
Polypropylene film.
Construction:
Operating Temperature Range:
Non-inductively wound with extended
foil. Additional details on general
specifications page.
-55°C to +85°C
(+105°C with proper voltage derating)
Lead Wire:
Tinned copper.
Applications:
Switching and high voltage power
supplies, inverters, snubbers, resonant
converters and electronic lighting ballasts.
Dissipation Factor:
See tabulated data.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
37
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene
Corona Start Voltage (typical):
Capacitance Range:
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Standard Lead Styles
TERMINAL B,F
TERMINAL A
TERMINAL D,G,H
TERMINAL C
Type 716P
Polypropylene
Standard Lead Spacings
CASE
CODE
Term. A
Term. B
N
J
K
L
M
0.394 (10)
0.500 (12.7)
0.688 (17.5)
1.031 (26.2)
1.406 (35.7)
0.394 (10)
S, inches (metric, mm in parentheses)
0.500
0.688
0.969
1.344
Term. D
(12.7)
(17.5)
(24.6)
(34.1)
Term. C *
------0.375 (9.5)
--0.375 (9.5)
0.719 (18.3) 0.886 (22.5)
--1.094 (27.8)
Term. F
0.295 (7.5)
0.394 (10)
0.590 (15)
0.886 (22.5)
---
Term. H
Term. G
--0.197 (5)
0.197 (5)
0.295 (7.5)
0.295 (7.5)
0.394 (10)
--0.590 (15)
--1.083 (27.5)
* Terminal C is designed for printed circuit boards requiring a lead spacing of 0.886 (22.5) with board hole sizes of 0.044 (1.1)
to 0.048 (1.2) in diameter. Available for "L" case code parts only. Please consult us if you have a specific requirement.
Standard Marking Format
Sample Marking
on unit
SBE716P600V
222J 9810
Tolerance codes
per EIA Standards
Description
SBE
716P
600V
222J
9810
SB Electronics identification
Type number
D-C Voltage rating, Volts
Capacitance and tolerance code
Weekly date code
(i.e. 10th week of 1998)
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
38
H
J
K
±3%
±5%
±10%
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Type 716P Standard Sizes/Ratings2
Value
Part
Number1 L max
µF
T max
H max
Value
Part
Number1 L max
µF
d
100 VDC / 70 VAC*
.0082
.009
.01
.012
.015
.018
716P82291N
716P90291N
716P10391N
716P12391N
716P15391N
716P18391N
.57
.57
.57
.57
.57
.57
.022
.025
.027
.033
.039
.047
716P22391N
716P25391N
716P27391N
716P33391N
716P39391N
716P47391N
.57 (14.5)
.57 (14.5)
.57 (14.5)
.57 (14.5)
.57 (14.5)
.57 (14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
.23
.24
.24
.23
.25
.26
T max
d
H max
200 VDC / 155 VAC*
(5.8)
(6.1)
(6.1)
(5.8)
(6.4)
(6.6)
.36 (9.1)
.37 (9.4)
.38 (9.7)
.37 (9.4)
.39 (9.9)
.42 (10.7)
.032
.032
.032
.032
.032
.032
.28 (7.1)
.29 (7 4)
.27 (6.9)
.29 (7 4)
.31 (7.9)
.34 (8.6)
.44 (11.2)
.45 (11.4)
.50 (12.7)
.53 (13.5)
.55 (14.0)
.58 (14.7)
.032 (0.8)
.032 (0:8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
716P50391J
716P56391J
716P62391J
716P68391J
716P75391J
716P82391J
716P90391J
716P10491J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.28 (7 1)
.29 (7 4)
.31 (7.9)
.32 (8.1)
.33 (8.4)
.35 (8.9)
.36 (9.1)
.38 (9.7)
.52 (13.2)
.53 (13.5)
.54 (13.7)
.56 (14.2)
.57 (14.5)
.59 (15.0)
.60 (15.2)
.62 (15.7)
.032
.032
.032
.032
.032
.032
.032
.032
.12
.15
.18
.20
.22
.25
.27
716P12491K
716P15491K
716P18491K
716P20491K
716P22491K
716P25491K
716P27491K
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.33 (8.4)
.37 (9.4)
.40 (10.2)
.42 (10.7)
.44 (11.2)
.47 (11.9)
.49 (12.4)
.57 (14.5)
.61 (15.5)
.64 (16.3)
.66 (16.8)
.68 (17.3)
.71 (18.0)
.73 (18.5)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.30
.33
716P30491L
716P33491L
1.25 (31.8)
1.25 (31.8)
.41 (10.4) .65 (16.5) .040 (1.0)
.42 (10.7) .67 (17.0) .040 (1.0)
.01
.012
.015
.018
.022
716P10392J
716P12392J
716P15392J
716P18392J
716P22392J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.25 (6.4)
.27 (6.9)
.26 (6.6)
.25 (6.4)
.27 (6.9)
.37 (9.4)
.39 (9.9)
.45 (11.4)
.45 (11.4)
.46 (11.7)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.027
.033
.039
.047
716P27392J
716P33392J
716P39392J
716P47392J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.29 (7 4)
.32 (8.1)
.32 (8.1)
.34 (8.6)
.48 (12.2)
.51 (13.0)
.56 (14.2)
.58 (14.7)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.056
.068
.082
.1
.12
.15
716P56392K
716P68392K
716P82392K
716P10492K
716P12492K
716P15492K
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9
.90 (22.9)
.30 (7.6)
.33 (8.4)
.36 (9.1)
.39 (9.9)
.40 (10.2)
.45 (11.4)
.55 (14.0)
.57 (14.5)
.60 (15.2)
.63 (16.0)
.69 (17.5)
.73 (18.5)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
200 VDC / 155 VAC*
716P18492L
716P22492L
716P27492L
716P33492L
716P39492L
716P47492L
716P56492L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.68
.82
1.0
716P68492M 1.65 (41.9)
716P82492M 1.65 (41.9)
716P10592M 1.65 (41.9)
.001
.0012
.0015
.0018
.0022
.0027
.0033
716P10294J
716P12294J
716P15294J
716P18294J
716P22294J
716P27294J
716P33294J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.25 (6.4)
.22 (5.6)
.24 (6.1)
.25 (6.4)
.26 (6.6)
.24 (6.1)
.24 (6.1)
.47 (11.9)
.44 (11.2)
.45 (11.4)
.46 (11.7)
.48 (12.2)
.45 (11.4)
.45 (11.4)
.032
.032
.032
.032
.032
.032
.032
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
.0039
.0047
.0056
.0068
.0082
.01
.012
.015
716P39294J .70 (17.8)
716P47294J .70 (17.8)
716P56294J .70 (17.8)
716P68294J .70 (17.8)
716P82294J .70 (17.8)
716P10394J .70 (17.8)
716P12394J .70 (17.8)
716P15394J .70 (17.8)
.24 (6.1)
.25 (6.4)
.24 (6.1)
.24 (6.1)
.25 (6.4)
.27 (6.9)
.29 (7.4)
.31 (7.9)
.36 (9.1)
.37 (9.4)
.44 (11.2)
.44 (11.2)
.45 (11.4)
.46 (11.7)
.48 (12.2)
.50 (12.7)
.032
.032
.032
.032
.032
.032
.032
.032
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
.018
.022
.027
.033
.039
.047
.056
.068
716P18394K
716P22394K
716P27394K
716P33394K
716P39394K
716P47394K
716P56394K
716P68394K
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.28 (7.1)
.30 (7.6)
.31 (7.9)
.33 (8.4)
.36 (9.1)
.39 (9.9)
.40 (10.2)
.43 (10.9)
.47 (11.9)
.49 (12.4)
.55 (14.0)
.57 (14.5)
.60 (15.2)
.62 (15.7)
.68 (17.3)
.72 (18.3)
.032
.032
.032
.032
.032
.032
.032
.032
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
(0.8)
.082
.1
.12
.15
.18
.22
.27
716P82394L
716P10494L
716P12494L
716P15494L
716P18494L
716P22494L
716P27494L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.38 (9.7)
.42 (10.7)
.45 (11.4)
.46 (11.7)
.50 (12.7)
.57 (14.5)
.63 (16.0)
.67 (17.0)
.70 (17.8)
.73 (18.5)
.84 (21.3)
.89 (22.6)
.95 (24.1)
1.01 (25.7)
.040
.040
.040
.040
.040
.040
.040
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
.33
.39
.47
716P33494M 1.65 (41.9)
716P39494M 1.65 (41.9)
716P47494M 1.65 (41.9)
.39 (9.9)
.43 (10.9)
.47 (11.9)
.47 (11.9)
.51 (13.0)
.56 (14.2)
.61 (15.5)
.67 (17.0)
.71 (18.0)
.75 (19.1)
.86 (21.8)
.90 (22.9)
.95 (24.1)
1.00 (25.4)
.040
.040
.040
.040
.040
.040
.040
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
(1.0)
.56 (14.2) .94 (23.9) .040 (1.0)
.61 (15.5) 1.00 (25.4) .040 (1.0)
.68 (17.3) 1.07 (27.2) .040 (1.0)
400 VDC / 200 VAC*
.57 (14.5) .96 (24.4) .040 (1.0)
.62 (15.7) 1.01 (25.7) .040 (1.0)
.68 (17.3) 1.07 (27.2) .040 (1.0)
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
2
Type 716P capacitors are available through the Sprague/Vishay Distribution Network on special order.
1
Dimensions in inches, metric (mm) in parenthesis.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
39
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene
.05
.056
.062
.068
.075
.082
.09
.1
.18
.22
.27
.33
.39
.47
.56
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Type 716P Standard Sizes/Ratings2
Value
Part
1
Number L max
µF
T max
H max
Value
Part 1
Number L max
µF
d
Type 716P
Polypropylene
600 VDC / 200 VAC*
.001
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
.0082
.01
716P10296J .70 (17.8)
716P12296J .70 (17.8)
716P15296J .70 (17.8)
716P18296J .70 (17.8)
716P22296J .70 (17.8)
716P27296J .70 (17.8)
716P33296J .70 (17.8)
716P39296J .70 (17.8)
716P47296J .70 (17.8)
716P56296J .70 (17.8)
716P68296J .70 (17.8)
716P82296J .70 (17.8)
716P10396J .70 (17.8)
.46 (11.7)
.44 (11.2)
.45 (11.4)
.46 (11.7)
.48 (12.2)
.44 (11.2)
.45 (11.4)
.46 (11.7)
.47 (11.9)
.49 (12.4)
.51 (13.0)
.56 (14.2)
.58 (14.7)
.012
.015
.018
.022
.027
.033
.039
716P12396K
716P15396K
716P18396K
716P22396K
716P27396K
716P33396K
716P39396K
.31 (7.9)
.34 (8.6)
.36 (9.1)
.39 (9.9)
.41 (10.4)
.44 (11.2)
.48 (12.2)
.55 (14.0)
.58 (14.7)
.60 (15.2)
.63 (16.0)
.69 (17.5)
.73 (18.5)
.76 (19.3)
.047
.056
.068
.082
.1
.12
716P47396L 1.25 (31.8) .42 (10.7) .70 (17.8)
716P56396L 1.25 (31.8) .45 (11.4) .73 (18.5)
716P68396L 1.25 (31.8) .45 (11.4) .84 (21.3)
716P82396L 1.25 (31.8) .49 (12.4) .88 (22.4)
716P10496L 1.25 (31.8) .54 (13.7) .93 (23.6)
716P12496L 1.25 (31.8) .59 (15.0) .97 (24.6)
d
H max
1000 VDC / 450 VAC*
.0056
.0068
.0082
.01
.012
716P562910L
716P682910L
716P822910L
716P103910L
716P123910L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.25 (6.4)
.27 (6.9)
.29 (7.4)
.29 (7.4)
.31 (7.9)
.45 (11.4)
.46 (11.7)
.48 (12.2)
.53 (13.5)
.55 (14.0)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.015
.018
.022
.027
716P153910L
716P183910L
716P223910L
716P273910L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.34 (8.6)
.37 (9.4)
.38 (9.7)
.42 (10.7)
.58 (14.7)
.61 (15.5)
.67 (17.0)
.70 (17.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.033
.039
.047
.032 (0.8) .056
.032 (0.8) .068
.032 (0.8)
.032 (0.8) .082
.032 (0.8) .1
.032 (0.8) .12
.032 (0.8) .14
716P333910L
716P393910L
716P473910L
716P563910L
716P683910L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.46 (11.7)
.46 (11.7)
.50 (12.7)
.54 (13.7)
.59 (15.0)
.74 (18.8)
.84 (21.3)
.88 (22.4)
.93 (23.6)
.98 (24.9)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
716P823910M
716P104910M
716P124910M
716P144910M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.52 (13.2)
.57 (14.5)
.62 (15.7)
.67 (17.0)
.90 (22.9)
.96 (24.4)
1.01 (25.7)
1.06 (27.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
716P102912L
716P122912L
716P152912L
716P182912L
716P222912L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.23 (5.8)
.24 (6.1)
.25 (6.4)
.27 (6.9)
.29 (7.4)
.45 (11.4)
.46 (11.7)
.47 (11.9)
.49 (12.4)
.51 (13.0)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.15
.18
.22
.040 (1.0) .0027 716P272912L
716P15496M 1.65 (41.9) .55 (14.0) .93 (23.6)
.040 (1.0) .0033 716P332912L
716P18496M 1.65 (41.9) .59 (15.0) .98 (24.9)
716P22496M 1.65 (41.9) .65 (16.5) 1.04 (25.7) .040 (1.0) .0039 716P392912L
.0047 716P472912L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.28 (7.1)
.30 (7.6)
.30 (7.6)
.32 (8.1)
.48
.49
.54
.56
(12.2)
(12.4)
(13.7)
(14.2)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.0056
.0068
.0082
.01
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
716P56298L
716P68298L
716P82298L
716P10398L
716P12398L
716P15398L
716P18398L
716P22398L
716P27398L
716P33398L
716P39398L
716P47398L
716P56398L
716P68398L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.25 (6.4)
.27 (6.9)
.29 (7.4)
.29 (7.4)
.31 (7.9)
.34 (8.6)
.37 (9.4)
.38 (9.7)
.42 (10.7)
.46 (11.7)
.46 (11.7)
.50 (12.7)
.54 (13.7)
.59 (15.0)
.45 (11.4)
.46 (11.7)
.48 (12.2)
.53 (13.5)
.55 (14.0)
.58 (14.7)
.61 (15.5)
.67 (17.0)
.70 (17.8)
.74 (18.8)
.84 (21.3)
.88 (22.4)
.93 (23.6)
.98 (24.9)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.34 (8.6)
.37 (9.4)
.38 (9.7)
.42 (10.7)
.45 (11.4)
.082
.1
.12
.14
716P82398M
716P10498M
716P12498M
716P14498M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.52 (13.2)
.57 (14.5)
.62 (15.7)
.67 (17.0)
.90 (22.9)
.96 (24.4)
1.01 (25.7)
1.06 (27.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.27 (6.9)
.24 (6.1)
.26 (6.6)
.27 (6.9)
.28 (7.1)
.25 (6.4)
.25 (6.4)
.26 (6.6)
.28 (7.1)
.30 (7.6)
.32 (8.1)
.32 (8.1)
.34 (8.6)
T max
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
1200 VDC / 475 VAC*
.001
.0012
.0015
.0018
.0022
800 VDC / 450 VAC*
.0056
.0068
.0082
.01
.012
716P562912L
716P682912L
716P822912L
716P103912L
716P123912L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.58
.61
.67
.70
.73
(14.7)
(15.5)
(17.0)
(17.8)
(18.5)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.015
.018
.022
.027
716P153912L
716P183912L
716P223912L
716P273912L
1.25 (31.8) .46 (11.7) .84
1.25 (31.8) .50 (12.7) .88
1.25 (31.8) .54 (13.7) .93
1.25 (31.8) .60 (15.2) .99
(21.3)
(22.4)
(23.6)
(25.1)
.032
.032
.032
.032
.033
.039
.047
.056
716P333912M
716P393912M
716P473912M
716P563912M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.53 (13.5)
.57 (14.5)
.62 (15.7)
.68 (17.3)
.91 (23.1)
.96 (24.4)
1.01 (25.7)
1.07 (27.2)
(0.8)
(0.8)
(0.8)
(0.8)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
2
Type 716P capacitors are available through the Sprague/Vishay Distribution Network on special order.
1
Dimensions in inches, metric (mm) in parenthesis.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
40
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Type 716P Standard Sizes/Ratings2
Value
Part
1
Number
µF
L max
T max
H max
Value
Part
µF
Number1
d
1.25
1.25
1.25
1.25
1.25
(31.8) .28 (7.1)
(31.8) .29 (7.4)
(31.8) .30 (7.6)
(31.8) .31 (7.9)
(31.8) .32 (8.1)
.0027
.0033
.0039
.0047
716P272916L
716P332916L
716P392916L
716P472916L
1.25
1.25
1.25
1.25
(31.8) .35 (8.9)
(31.8) .37 (9.4)
(31.8) .38 (9.7)
(31.8) .41 (10.4)
.0056
.0068
.0082
.01
.012
716P562916L
716P682916L
716P822916L
716P103916L
716P123916L
1.25
1.25
1.25
1.25
1.25
(31.8) .43 (10.9)
(31.8) .47 (11.9)
(31.8) .47 (11.9)
(31.8) .51 (13.0)
(31.8) .55 (14.0)
.015
.018
.022
.027
.033
716P153916M
716P183916M
716P223916M
716P273916M
716P333916M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.49 (12.4)
.53 (13.5)
.58 (14.7)
.63 (16.0)
.69 (17.5)
.001
.0012
.0015
.0018
.0022
.0027
.59 (15.0) .032 (0.8) .0033
.61 (15.5) .032 (0.8)
.67 (17.0)
.032 (0.8) .0039
.69 (17.5) .032 (0.8) .0047
.0056
.72 (18.3) .032 (0.8) .0068
.75 (19.1) .032 (0.8) .0082
.85 (21.6) .032 (0.8) .01
.90 (22.9) .032 (0.8) .012
.94 (23.9) .032 (0.8)
.015
.87 (22.1) .040 (1.0) .018
.91 (23.1) .040 (1.0) .022
.96 (24.4) .040 (1.0) .027
1.02 (25.9) .040 (1.0) .033
1.08 (27.4) .040 (1.0)
.47 (11.2)
.48 (12.2)
.50 (12.7)
.55 (14.0)
.56 (14.2)
H max
d
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
716P102920L
716P122920L
716P152920L
716P182920L
716P222920L
716P272920L
716P332920L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.28 (71.)
.29 (7.4)
.30 (7.6)
.31 (7.9)
.32 (8.1)
.35 (8.9)
.37 (9.4)
.47 (11.9)
.48 (12.2)
.50 (12.7)
.55 (14.0)
.56 (14.2)
.59 (15.0)
.61 (15.5)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
716P392920L
716P472920L
716P562920L
716P682920L
716P822920L
716P103920L
716P123920L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.38 (9.7)
.41 (10.4)
.43 (10.9)
.47 (11.9)
.47 (11.9)
.51 (13.0)
.55 (14.0)
.67 (17.0)
.69 (17.5)
.72 (18.3)
.75 (19.1)
.85 (21.6)
.90 (22.9)
.94 (23.9)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
.032 (0.8)
716P153920M
716P183920M
716P223920M
716P273920M
716P333920M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.49 (12.4)
.53 (13.5)
.58 (14.7)
.63 (16.0)
.69 (17.5)
.87 (22.1)
.91 (23.1)
.96 (24.4)
1.02 (25.9)
1.08 (27.4)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
.040 (1.0)
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
1
2
1
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
Type 716P capacitors are available through the Sprague/Vishay Distribution Network on special order.
Please note:
It is not possible to list every capacitance value available for each rating, if you require a specific
cap value not listed just give us a call. We will supply the details you need.
Dimensions in inches, metric (mm) in parenthesis.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
41
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene
716P102916L
716P122916L
716P152916L
716P182916L
716P222916L
T max
2000 VDC / 500 VAC*
1600 VDC / 500 VAC*
.001
.0012
.0015
.0018
.0022
L max
Type 716P
Polypropylene Film/Foil Capacitors
SBE
Corona, Dissipation Factor Specifications
Corona Start Voltage
D-C Rating
Typical Corona
Start Voltage, RMS
100
200
400, 600
800, 1000
1200
1600, 2000
250
300
325
600
625
650
Maximum Dissipation Factor (D.F.) in %
Type 716P
Polypropylene
100V-600V
800V/1000V
1200V
1600V/2000V
Range (µF) 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz
Cap
.001 - .012
.015 - .027
.033 - .068
.082 - .1
.12 - .33
.39 - .56
.68 - 1.0
.028
.029
.030
.031
.034
.038
.047
.034
.038
.046
.053
.076
.107
.167
.037
.037
.038
.048
.049
---
.075
.078
.087
.135
.141
---
.034
.035
.042
-----
.064
.067
.104
-----
.032
.037
.037
-----
.053
.078
.079
-----
For additional information on Corona and Dissipation Factor please refer to the
Technical Reference section of this catalog. For more specific data or assistance
with a specific application just give us a call.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
42
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
dV/dt Specifications
Maximum Pulse Rise Time (dv/dt) in Volts/µsec
Cap
100V
200V
400V
600V
800V/
1000V
1200V
.001
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
.0082
.01
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.1
.12
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
-
4600
4200
3800
3400
3100
2800
2500
2300
2100
1800
1600
1500
1300
1200
1100
910
820
740
670
620
560
520
430
400
360
20700
18900
16900
15400
14000
12600
11400
10500
9500
8700
7900
7200
6500
6000
5300
4400
4000
3600
3200
3000
2700
2500
2300
1900
1700
1600
1400
1300
1200
1100
880
810
740
-
20700
18900
16900
15400
14000
12600
11400
10500
9500
8700
7900
7200
6500
5400
4800
4400
4000
3600
3200
3000
2500
2300
2100
1900
1700
1600
1300
1200
1100
-
16400
14900
13600
12300
11200
10000
9200
8300
7500
6800
6200
5700
5200
4700
4000
3600
3300
-
43200
39500
35300
32200
29100
25000
22600
20800
18900
17400
15700
14300
13000
11900
10600
9700
8800
7900
6600
6100
5600
5100
-
-
-
-
-
4100
3700
3400
3000
2800
2500
2200
2000
1700
1500
1400
1300
1100
1000
900
800
700
700
600
500
-
1600V/
2000V
43200
39500
35300
32200
29100
26300
23800
21900
19900
18300
16600
15100
13700
12500
10300
9400
8500
7700
7000
-
Note: dV/dt ratings based on measurements made at junction of the wire leads and capacitor body.
For additional information on Pulse Rise Time (dV/dt) please refer to the
Technical Reference section of this catalog. For more specific data or assistance
with a specific application just give us a call.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
43
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene
Value (µF)
Type 716P
Polypropylene Film/Foil Capacitors
SBE
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
716P, 100 VDC
Type 716P
Polypropylene
Frequency - KHZ
Voltage (RMS)
Type 716P, 200 VDC
Frequency (KHz)
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
44
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 716P, 400 VDC
Frequency (KHz)
Voltage (RMS)
Frequency (KHz)
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
45
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene
Type 716P, 600 VDC
Type 716P
Polypropylene Film/Foil Capacitors
SBE
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 716P, 800/1000 VDC
Type 716P
Polypropylene
Frequency (KHz)
Voltage (RMS)
Type 716P, 1200 VDC
Frequency (KHz)
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
46
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 716P, 1600/2000 VDC
Type 716P
Polypropylene
Frequency (KHz)
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
47
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Type 716P
Polypropylene Film/Foil Capacitors
SBE
|Z| (ohms)
|Z| (ohms)
Typical Impedance vs. Frequency
400V
200V
Frequency (MHz)
Type 716P
Polypropylene
|Z| (ohms)
|Z| (ohms)
Frequency (MHz)
800V/1000V
600V
Frequency (MHz)
|Z| (ohms)
|Z| (ohms)
Frequency (MHz)
1200V
1600V/2000V
Frequency (MHz)
Frequency (MHz)
Please note: Capacitance values above are in µF. The resonant frequency and impedance shown above apply to units with a 0.250"
lead length and are typical values only. Please contact us for data on the 100VDC rated units.
SB Electronics, Inc.
131 South Main St. • Barre, VT 05641-4854 USA
48
Tel: 802-476-4146 • FAX: 802-476-4149
www.sbelectronics.com • lnfo@sbelectronics.com
Download