LIST OF COURSE WORK SUBJECTS AND TEXTBOOKS
Sl.
No.
1
2
3
4
5
Course
Text books
Nanoelectronics 1. C.P. Poole Jr., F.J. Owens, “Introduction To Nanotechnology”,
Wiley (2003).
2. Waser Ranier, “Nanoelectronics and Information Technology”
(Advanced Electronic Materials and
Novel Devices), Wiley-VCH (2003).
3. K.E. Drexler, “Nano Systems”, Wiley (1992).
4. John H. Davies, “The Physics of Low-Dimensional
Semiconductors”, Cambridge University Press, 1998
Research papers.
Linear Algebra 1. Gilbert Strang, "Linear Algebra and its Applications”, 3rd
edition, Thomson Learning Asia, 2003.
2. Kenneth Hoffman and Ray Kunze, "Linear Algebra," 2nd edition,
Pearson Education (Asia) Pte. Ltd/
Prentice Hall of India, 2004.
3. David C. Lay, “Linear Algebra and its Applications,” 3rd edition,
Pearson Education (Asia) Pte. Ltd,
2005.
4. Bernard Kolman and David R. Hill, "Introductory Linear Algebra
with Applications," Pearson
Education (Asia) Pte. Ltd, 7th edition, 2003.
HVDC Power
1. K. R. Padiyar, “HVDC Power Transmission Systems:
Transmission
Technology and System Interactions”, New age
International, 1st Edition, 2008.
2. E. W. Kimbark, “Direct Current Transmission”, Vol. I, Wiley
Future Science, 1971.
3. Arrilaga, “High Voltage Direct Current Transmission”, The
Institute of Engineering and Technology, 2nd
Edition, 2007
Design of
1. Ned Mohan Tore. M. Undeland and William. P. Robbins; “Power
Power
Electronics: Converters, Applications
Converters
and Design”, 3rd Edition, John Wiley and Sons, 2003.
2. G.C. Chryssis, “High Frequency Switching Power Supplies”,
McGraw Hill, 1989 (2nd Edn.).
3. Umanand. L. & Bhat. S.R. “Design of Magnetic Components for
Switched Mode Power Converters”,
Wiley Eastern Publication, 1992.
Energy
1. Allen J.Wood and Bruce F.Woolenberg, “Power Generation,
Management
Operation, and Control'', John Wiley and Sons, 1984. 2. G.T.Heydt,
Systems
“Computer Analysis Methods for Power Systems”, Macmillan
Publishing Company, 1986. 3. A.K.Mahalanabis, D.P.Kothari, and
S.I.Ahson, “Computer Aided Power System Analysis and Control'',
Tata McGraw Hill Pub. Co., 1992. 4. Torsten Cegrell, “Power
System Control Technology'', Prentice Hall India, 1986. 5.
R.L.Sullivan, “Power System Planning'', McGraw Hill Inc., 1977 6.
George L.Kusic, “Computer Aided Power System Analysis'', PHI,
1989. 7. WR Murthy and G Mckay, “Energy Management”, BSP
Publications, Hyderabad.
1
6
Distribution
system design
and control
7
Switched mode
power
conversion
8
Power system
instrumentation
9
Power
semiconductor
devices
10
11
12
1. Turan Gonen, "Electric Power Distribution System Engineering",
McGraw Hill.
2. A.S,Pabla, "Electric Power Distribution System", Second Edition,
TMH.
3. Gorti Ramamurthy ,Hand Book of Electrical Power
Distribution,University Press,2nd Edition,2009.
1. Ned Mohan, Tore.M. Undeland and William.P Robbins, “Power
Electronics Converters”,
applications and design”, John Wiley 2003.
2. Rashid M.H. Power Electronics – “Circuits Devices and
Applications”, Prentice Hall India Third
Edition.
1. Cooper Helfrick, “Electrical Instrumentation and Measuring
Techniques'', Prentice Hall India,
1986.
2. D.C.Nakra and K.K.Chowdhry, “Instrumentation, Measurement,
and Analysis'', Tata McGraw Hill
Publishing Co., 1984.
1. Ned Mohan Tore.M. Undeland and William.P Robbins, “Power
Electronics converters”,
Applications and Design”, John Wiley and Sons, 3rd Edition, 2002..
2. G. Massobrio, P. Antognetti, “Semiconductor Device Modeling
with Spice”, McGraw-Hill, 2nd
Edition, 1998.
3. B. Jayant Baliga, “Power Semiconductor Devices”, PWS
Publication, 1st Edition, 1995.
4. V. Benda, J. Gowar, and D. A. Grant, “Discrete and Integrated
Power Semiconductor
Devices:Theory and Applications”, John Wiley & Sons, 1999.
Power
1. G. K. Dubey, S. R. Doradla, A. Johsi, and R. M. K. Sinha,
electronic
“Thyristorised Power Controllers”, New Age
system design
International, 1st Edition, 2004.
using IC's
2. George Chryssis “High Frequency Switching Power Supplies”,
MGH, 2nd Edition,
3. Unitrode application notes: http://www.smps.us/Unitrode.html
Electromagnetic 1. Otto H. W., “Noise Reduction Techniques in Electronic
compatibility
Systems”, 2nd Edition, 1985. 2. William B. Greason, “Electrostatic
Damage in Electronics: Devices and Systems”, John Wiley and
Sons, 1986. 3. Joseph Di Giacomo, “Digital Bus Hand Book”,
McGraw Hill Publishing Company, 1990. 4. White, R. J.
“Handbook series of Electromagnetic Interference and
Compatibility”, Don White consultants Inc. 1980.
Over voltage
1. Ragaller K, “Surges in High Voltage Networks”, Plenum press,
phenomenon in 1980.
Power systems 2. Begamudre, “EHV Transmission”, 1 & 2 edition, PHI.
3. EPRI, Transmission line reference Book – 345 kV and
above,1984.
4. Ashtafaq Hussain, Power systems, PHI.
5. Green wood, “Power System Transients”, Orient longman, 1987.
2
6. IEEE publication, Surge Protection in power systems, No. 79,
EHO 144-6-PWR
13
High voltage
power
transformers
14
Power system
reliability
engineering
15
Environmental
engineering and
pollution
control
16
AC-DC drives
17
FACTs
controllers
18
Advanced
control systems
19
PhotoVoltaic
cells
1. SJS.Vasutinsky, Principles, Operation mid Design of Power
Transformers, PSG college of
Technology, Coimbatore, 1962.
2. L.F.BIume, A. Boyajian, G.Camilii, T.C.Leniiox, S.Minner and
V.M.Montsinger, “Transformer
Engineering”, II edition, John Wiley and Sons Inc., New York,
Chapman and Hall limited, London, 1951.
1. Roy Billington, “Reliability assessment of large electric power
systems”, Kluwer Academic
Publishers, USA, 1988,
2. R. Billington and A.N. Allen, “Reliability evaluation of
engineering systems; concepts and
techniques”, Longman London/ Plenum press, NY, 1983.
3. Hammersley J.M., Handscomb D.C., “Monte Carlo Methods”,
John Wiley and Sons Inc., NY, 1964.
4. IEEE committee report, IEEE reliability test system, IEEE PAS,
Vol. PAS98, 1979, pp 2047-54.
1. Mackenzie.L.Davis and David.A.Cornwell, “Introduction to
Environmental Engineering”, McGraw Hill,
1991.
2. Noel De Nevers, “Air Pollution Control Engineering”, Mc Graw
Hill, 1995.
1. Bose B. K, “Modern Power Electronics & AC Drives” IEEE
press 1998.
2. Murphy JMD, Turnbull F.G., ‘Thyristor Control of AC Motors”
Pergamon Press Oxford, 1998.
1. K.R Padiyar, “FACTS Controllers in power transmission and
distribution”, New Age
International, 2007.
2. Narain G Hingorani and L. Gyugyi, “Understanding FACTS:
Concepts and Technology of Flexible
AC Transmission Systems”, Standard Publishers, New-Delhi.
3. Y. H. Song and A. T. Johns, “Flexible AC Transmission
System”, Institution of Engineering and
Technology, 2009
1. Ogata. K. “Modern Control Engineering”, PHI. 2. Ogata K
“Discrete time Control Systems”, Pearson Education. 3. Nagarath
and Gopal, “Control Systems Engineering”, Wiley Eastern Ltd. 4.
M Gopal “Modem Control System Theory”; Wiley Eastern Ltd. 5.
M. Gopal, “Digital Control & State Variable Methods”, TMH,
2003.
1. “Solar Cells and Photovoltaics”, McGraw hill Book Company
1982.
2. Stephen.J.Fonash, “Solar Cell Device Physics” , Academic Press,
3
20
21
22
23
24
25
26
27
28
1982.
3. T.J. Couts and J.D. Meakin, “Current Topics in
Photovoltaics”.Academic Press, 1990.
DSP
Hamid Toliyat and Steven Campbell, “DSP-Based
Applications for Electromechanical Motion Control”, CRC Press, 2004.
power
electronics
Wireless sensor 1. Ananthram Swami et. el,” Wireless Sensor Networks: Signal
network
Processing and Communication
Perspectives”, John Wiley, 2007.
Computer
1. Ananthram Swami et. el,” Wireless Sensor Networks: Signal
network
Processing and Communication
Perspectives”, John Wiley, 2007.
Broadband
1. Loutfi Nuyami, “WIMAX: technology for broadband
wireless
access”,John Wiley, 2007.
network
2. Yan Zhang, Hsia Hwa Chen, “Mobile WIMAX”, Aurobech
publications, 2008.
Wireless
1. David Tse, P. Viswanath, “Fundamentals of wireless
communication communication”, Cambridge, 2006.
2. Andreas Molisch, “Wireless communications”, Wiley, 2009.
William C Y Lee, “Mobile Communication Engineering Theory
and applications”, TMGH, 2008.
3. Upen Dalal, “Wireless communication”, Oxford, 2009.
6 Mark Ciampa, Jorge Olenwa, “Wireless communications”,
Cengage, 2007.
Research
1. Research Methodology: [An Introduction For Science &
methodology
Engineering Students] - Stuart Melville, Wayne Goddard
Published by Juta & Company
2. Research Methodology Methods and Techniques Second Revised
Edition
By C.R.Kothari
3. R&D Methods for Science and Engineering - Peter Bock
Embedded
1. Rajkamal “Embedded System Architecture: Programming &
system design
Design”, TMH Edition, 2007.
2. John B. Peatman “Design with PIC Microcontrollers”, Prentice
Hall, 1997.
3. J. W. Valvano “ Embedded Microcomputer System: Real time
interfacing”, Cengage-Engineering, 1st
Computer aided
power system
operation &
analysis
Solid state
relays &
protection
Edition, 2000.
4. Jane W.S. Liu, “Real Time Systems”, Prentice Hall, 2000.
1. Allen.J Wood Bruce F.Wollenberg, “Power Generation
Operation and Control” ,1996. 2. .2. George L Kusic, “Computer
Aided Power System Analysis”, Prentice Hall of India Pvt. Ltd,
1989.
1. Ravindranath and Chander, "Power System Protection and
Switch Gear"
2. T.S.Madhava Rao, "Static Relays with Microprocessor
Application"
4
29
Advanced
power system
analysis and
stability
30
Advances in
digital signal
processing
31
AI Applications
to power
system
32
Soft computing
33
Pattern
recognition
1. Stagg & EI-Abiad, "Computer Methods in Power System
Analysis'. McGraw Hill
2. Nagarath & Kothari, "Modern Power System Analysis", TMH
3. R.N.Dhar, "Computer Aided Power System Operation &
Analysis", TMH
4. A,K,Mahalanabis. Kothari, Ahson, "Computer aided Power
system analysis & control"
5. Allen Wood and Woolenberg, "Power Generation Operation and
Control"
6. Kimbark, "Power system Stability Vol-III"
7. K.R.Padiyar, "Power System Dynamics, Stability & Control “,
Interline Publishing
8. C. W.Taylor, "Power System Voltage Stability", McGraw Hill
9. P.M Anderson, A A Fouad, "Power System Control &
Stability",IEEE Press
TEXT BOOKS:
1. John G. Proakis and Dimitris G. Manolakis: Digital Signal
Processing, 3rd Edition, Pearson, 2003.
2. Li Tan: Digital Signal Processing – Fundamentals and
applications, Elsevier, 2008.
REFERENCE BOOKS:
1. Paulo S. R. Diniz, Eduardo A. B. da Silva And Sergio L. Netto:
Digital Signal Processing: System Analysis
and Design, Cambridge University Press, 2002.
2. Sanjit K. Mitra: Digital Signal Processing, A Computer Based
Approach, Tata McGraw Hill, 2001.
3. Alan V.Oppenheim and Ronald W.Schafer: Digital Signal
Processing, PHI Learning, 2003.
1. D.W.Patterson, “Introduction to Artificial Intelligence and Expert
Systems'', Prentice-Hall of India,
1992.
2. Charniak E. and Mcdermott D., “Introduction to AI'', AddisonWesley, 1985.
3. Elaine Rich, Kevin Knight, “Artificial Intelligence'', Tata
McGraw-Hill, 1991.
4. Nils J.Nilson, “Problem Solving Methods in AI'', McGraw-Hill,
1971.
5. Nils J.Nilson, “Principles of AI'', Berlin Springer-Verlag”, 1980.
1. Anderson J.A.: An Introduction to Neural Networks, PHI, 1999.
2. Hertz J. Krogh, R.G. Palmer: Introduction to the Theory of
Neural Computation, Addison-Wesley, 1991. 3. G.J. Klir & B.
Yuan: Fuzzy Sets & Fuzzy Logic, PHI, 1995. 4. Melanie Mitchell:
An Introduction to Genetic Algorithm, PHI, 1998.
1. Eart Gose, Richard Johnsonburg and Steve Joust, “Pattern
Recognition and Image Analysis”,
Prentice-Hall of India-2003.
1. Duda and Hart, “Pattern recognition (Pattern recognition a scene
analysis)” .
5
2. Robert J Schalkoff, “Pattern recognition : Statistical ,Structural
and neural approaches”, John Wiley
34
Advanced
materials and
processing
35
NonDestructive
testing
36
Advanced
joining
processes
37
Advanced
materials
technology
1. Engineering Metallurgy - Raymond and Higgens - ELBS/EA
2. Introduction to Material Science and Engineering James.F.Shackleford - Mc Millan, NY 7
th edition.
3. Powder Metallurgy-Metals Hand Book -ASM, USA - Vol.7,
1974.
4. Composite Materials - Science and Engineering - Chawla K.K. ,
Springer - Verlag, Newyork
- 2nd edition, 1998.
5. Cast Metal Matrix Composites ASM Metals Hand Book - P.K.
Rohagti - VI5.
6. Elements of Material science and Engineering - Van Vlack L.H. Addison Wesley, NY 1989.
1. Non Destructive Testing - Mc Gonnagle JJ – Garden and reach
New York.
2. Non Destructive Evolution and Quality Control - volume 17 of
metals hand book 9 edition
Asia internal 1989.
3. The Testing instruction of Engineering materials - Davis H.E
Troxel G.E wiskovil C.T McGraw hill.
1. Welding Engineering Handbook - A.W.S.
2. Welding Engineering - Rossi - McGraw Hill.
3. Advanced Welding processes - Nikodaco & Shansky - MIR
Publications.
4. Welding Technology - O.P. Khanna
5. Welding for Engineers - Udin, Funk & Wulf
TEXT BOOKS: 1. Materials Science & Engineering - William D.
Callister Jr. an introduction, 4th edition. John Wiley & Sons. 2.
Engg. Materials & their applications - R. A. Flinn & P. K. Trojan,
4th edition, Jaico Publishing House. REFERENCE BOOKS: 1.
Composite Materials, Science & Engg - Krishan K. Chawla, 2nd
edition, Springer publication. 2. ASM Handbook on Metal Casting Vol .15, 9th edition, ASM publication 3. ASM Handbook on
Powder Metallurgy - Vol 17, ASM publications 4. Nanotechnology
– Basic Science and Emerging Technologies, -Mick Wilson, Kamali
Kannangara, Overseas Press India Private Limited, First Indian
Edition 2005.
6
38
Surface
treatment and
finishing
39
Finite element
method
40
Mechanics of
composite
materials &
structures
41
Experimental
stress analysis
1. Surface preparations & finishes for Metals - James A Murphy McGraw Hill.
2. Principles of metal surface treatment and protection - Pergamon
Press Gabe, David Russell
- Description, Oxford; New York - 2d ed., 1978.
3. Handbook of metal treatment and testing - John wiley & sons.
4. Heat Treatment of Metals – Zakrov - MlR Publications.
5. Metals Hand Book – ASM.
TEXT BOOKS:
1. Finite Elements in engineering, Chandrupatla T. R., 2nd Edition,
PHI, 2007.
2. Finite Elements Analysis – Procedures in Engineering,
Lakshminarayana H. V., Universities
Press, 2004.
REFERENCE BOOKS:
1. Finite Elements Method in Engineering, Rao S. S. 4th Edition,
Elsevier, 2006.
2. Textbook of Finite Element Analysis P. Seshu, -PHI, 2004.
3. Finite Element Method, J. N. Reddy, McGraw -Hill International
Edition.
4. Finite Elements Procedures, Bathe K. J. PHI.
5. Concepts and Application of Finite Elements Analysis, Cook R.
D., et al., 4th Edition, Wiley
& Sons, 2003.
TEXT BOOKS: 1. Autar K. Kaw, Mechanics of Composite
Materials, CRC Press, New York. 2. Mein Schwartz, Composite
Material Handbook McGraw Hill Book Company, 1984. 3. E. Paul
Degarmo, J. T. Black, Ronald A Kohser, ”Materials and Processing
in Manufacturing REFERENCE BOOKS: 1. Rober M. Joness,
Mechanics of Composite Materials, McGraw Hill KogakushaLtd. 2.
P. K. mallick, “Fiber Reinforced Composites” 3. Minoru Taya,
Richard J. Arsenault, “Metal matrix Composites” 4. Valery V.
Vasiliev, Evgeny V. Morozov “Advanced Mechanics of composite
Materials” second edition-2007, Elsevier Ltd, U.K.
TEXT BOOKS:
1. Experimental Stress Analysis - Dally and Riley, McGraw Hill.
2. Experimental Stress Analysis - Sadhu Singh Hanna publisher.
REFERENCES BOOKS:
1. Experimental Stress Analysis - Srinath, Lingaiah, Raghavan,
Gargesa, Ramachandra and
Pant, Tata McGraw Hill.
2. Photoelasticity Vol I and Vol II - M.M.Frocht,. John Wiley and
sons.
3. Strain Gauge Primer - Perry and Lissner.
4. Photo elastic Stress analysis - Kuske, Albrecht and Robertson
John Wiley & Sons.
5. Motion Measurement and Stress Analysis - Dave and Adams,
6. Hand Book of Experimental Stress Analysis AS. Kobayassin
(Ed), SEMNCH, II edition.
7
42
43
44
45
46
Non-Traditional 1. New technology Institution of Engineers - Bhattacharya - India
machining
2. Production Technology - HMT - Tata Mc Graw Hill - ISBN-10;
0070964432
3. Modern Machining Process - P.C Pandy & H.S. Shan - Tata
McGraw Hill - ISBN:
0070965536 - Publishing Date: Feb-80
4. Metals Hand Book - ASM - Vol-3.
5. High Velocity Forming of Metals - F.M Wilson - ASTME Pretice
Hall.
6. Modern Manufacturing Method - Adithan - New Age
International (p) Limited - ISBN:
8122408176, 2007.
7. Modern Machining Processes - P.K. Mishra - Narosa Publishing
House, New Delhi - 1997.
Adavanced heat 1. Heat Transfer – A Basic Approach - Ozisik M.N., McGraw-Hill
transfer
Publications, 1985. 2. Heat Transfer - Holmon J.P., McGraw-Hill
Publications, 2002. 3. Principles of Heat Transfer - Frank Kreith &
M. S. Bohn, Thomson Publications, 2001
Fuels and
TEXT BOOKS:
combustion
1. Arthur H. Lefebvre & Dilip R. Ballal, Gas Turbine Combustion,
CRC Press, 3rd Edition, 2010
2. Minkoff, G. J., and C.F.H. Tipper, Chemistry of Combustion
Reaction, London Butterworths,
1962.
3. Samir Sarkar, Fuels & Combustion, Orient Long man 1996.
REFERENCE BOOKS:
1. Error! Hyperlink reference not valid.. Error! Hyperlink reference
not valid.,
Macmillan India Limited, 1989
2. Wilson, P.J. and J.H. Wells, Coal, Coke and Coal Chemicals,
New York, McGraw-Hill, 1960.
3. Williams, D. A. and G. James, Liquid Fuels, London Pergamon,
1963.
4. Gas Engineers Handbook, New York, Industrial Press, 1966.
Computational
1. Numerical Heat Transfer and Fluid Flow - S.V. Patankar,
methods in heat Hemisphere Publishing Company.
transfer and
2. Computational Fluid Dynamics - T.J. Chung, Cambridge
fluid flow
University Press
3. Computational fluid flow and heat transfer - K. Murlidhar and T.
Sounderrajan, Narosa
Publishing Co.
4. Computational fluid mechanics and heat transfer - D. A.
Anderson, J. C. Tannehill, R.H.
Pletcher, Tata McGraw-Hill Publications
5. Computational fluid dynamics - J.A. Anderson, McGraw-Hill
Publications
Computer
1. Computer Modeling of Electrical Power Systems - J.Arrillaga
Modeling of
and C.P.Arnold and B.J.harker
Electrical
Wiley Inter-science Publications
Power System
2. Computer Modelling of Electrical Power Systems / Edition 2 8
Jos Arrillaga, Neville R. Watson
Wiley, John & Sons, Incorporated
47
Heat Transfer & 1. Heat Transfer & Fluid Flow - Suhas Patankar (Author)
Fluid Flow
Taylor & Francis (1 January 1980)
2. An Introduction to Fluid Mechanics and Heat Transfer - J. M.
Kay, R. M. Nedderman
Syndics of the Cambridge University Press
9