Exhibit “A”
Amendment # 1
CURRENT STANDARD - Article 5.15 A. Façade #2 Exterior Materials and #3 Exterior
adjacent to Residential for Commercial Uses (C1, C2, and C3) of the Unified Development
Ordinance reads:
2. Exterior Materials: All siding shall be brick, split-face concrete masonry unit (CMU), fiber cement
board siding, stone, stucco, decorative precast panels, integrally colored block, EIFS, or heavygauge vinyl (minimum of 0.042” gauge).
3. Exterior adjacent to Residential: The exterior material of all buildings adjacent to residentially
zoned or occupied areas and thoroughfares shall be constructed predominantly of brick, split-face
concrete masonry unit (CMU), stone, or stucco materials with masonry surface and appearance.
PROPOSED MODIFICATION - Article 5.15 Section A. Façade #2 Exterior Materials and #3
Exterior adjacent to Residential of the Unified Development Ordinance by replacing section “#2
and #3” with the following:
2. Exterior Materials: All siding shall be brick, split-face concrete masonry unit (CMU), fiber cement
board siding, stone, stucco, decorative precast panels, integrally colored block, EIFS, heavygauge vinyl (minimum of 0.042” gauge), reclaimed wood, or high pressure laminate (HPL) with a
decorative surface that is suitable for exteriors.
3. Exterior adjacent to Residential: The exterior material of all buildings adjacent to residentially
zoned or occupied areas and thoroughfares shall be constructed predominantly of brick, split-face
concrete masonry unit (CMU), stone, stucco materials with masonry surface and appearance,
reclaimed wood, or high pressure laminate (HPL) with a decorative surface that is suitable for
exteriors.
Amendment # 2
CURRENT STANDARD - Article 5.16 A. Façade #2 Exterior Materials and #3 Exterior
adjacent to Residential for Industrial Uses (I1) of the Unified Development Ordinance reads:
2. Exterior Materials: All siding shall be masonry, fiber cement plank siding, decorative precast
panels, integrally colored block, or EIFS concrete tilt-up panels with brick or stone facing can be
used integrally tinted textured masonry block, precast concrete (shall have integral color and
contain other materials embedded within).
3. Exterior Adjacent to Residential: The exterior of all buildings adjacent to residentially zoned or
occupied areas shall predominantly consist of brick, masonry, stone facade, or materials with
masonry surface and appearance.
PROPOSED MODIFICATION - Article 5.15 Section A. Façade #2 Exterior Materials and #3
Exterior adjacent to Residential of the Unified Development Ordinance by replacing section “#2
and #3” with the following:
2. Exterior Materials: All siding shall be brick, split-face concrete masonry unit (CMU), fiber cement
board siding, stone, stucco, decorative precast panels, integrally colored block, EIFS, heavygauge vinyl (minimum of 0.042” gauge), reclaimed wood, or high pressure laminate (HPL) with a
decorative surface that is suitable for exteriors.
3. Exterior adjacent to Residential: The exterior material of all buildings adjacent to residentially
zoned or occupied areas and thoroughfares shall be constructed predominantly of brick, split-face
concrete masonry unit (CMU), stone, stucco materials with masonry surface and appearance,
reclaimed wood, or high pressure laminate (HPL) with a decorative surface that is suitable for
exteriors.
Page 1 of 4 – Ordinance # 051815, Exhibit “A”
Exhibit “A”
Amendment #3
CURRENT STANDARD – Article 5.13 Section A. Façade #2 Exterior Materials for Singlefamily Residential zoning district (AG, ER, R1, R2, R3, R4, R5) of the Unified Development
Ordinance reads:
2. Exterior Materials: All siding shall be masonry, wood, fiber cement board siding, stucco,
composite lap siding, decorative precast panels, aluminum, EIFS, or heavy-gauge vinyl (minimum
of 0.042” gauge). Lap siding shall have a maximum ten-inch (10”) exposed board face. Vinyl
siding shall be nailed and not stapled to the side of the house.
PROPOSED MODIFICATION - Article 5.13 Section A. Façade #2 Exterior Materials for
Single-family Residential zoning districts of the Unified Development Ordinance by removing
the following:
2. Exterior Materials: All siding shall be masonry, wood, fiber cement board siding, stucco,
composite lap siding, decorative precast panels, aluminum, EIFS, or heavy-gauge vinyl (minimum
of 0.042” gauge). Lap siding shall have a maximum ten-inch (10”) exposed board face. Vinyl
siding shall be nailed and not stapled to the side of the house.
Amendment #4
CURRENT STANDARD – Article 5.14 Section A. Façade #2 Materials for Multi-family
Residential zoning district (M1, M2) of the Unified Development Ordinance reads:
2. Materials: All siding shall be masonry, wood, fiber cement board siding, stucco, composite lap
siding, decorative precast panels, integrally colored block, aluminum, EIFS, or heavy-gauge vinyl
(minimum of 0.042” gauge). Lap siding shall have a maximum ten-inch (10”) exposed board face.
Vinyl siding shall be nailed and not stapled to the side of the house.
PROPOSED MODIFICATION - Article 5.13 Section A. Façade #2 Exterior Materials for
Multi-family Residential zoning districts of the Unified Development Ordinance by removing
the following:
2. Materials: All siding shall be masonry, wood, fiber cement board siding, stucco, composite lap
siding, decorative precast panels, integrally colored block, aluminum, EIFS, or heavy-gauge vinyl
(minimum of 0.042” gauge). Lap siding shall have a maximum ten-inch (10”) exposed board face.
Vinyl siding shall be nailed and not stapled to the side of the house.
Amendment # 5
CURRENT STANDARD - Article 5.111 A. Façade, ii. Exterior Materials and iii. Exterior
adjacent to Residential for Permitted Nonresidential Uses on residentially zoned properties
(Zoning Districts: AG, ER, R1, R2, R3, R4, R5, M1, M2, MP) of the Unified Development
Ordinance reads:
3. Architectural Design Standards: Structures shall reflect the residential character of the area in
which they are established.
a. Facade:
Page 2 of 4 – Ordinance # 051815, Exhibit “A”
Exhibit “A”
i. Compatibility: Each building may be unique; however, all buildings within the development
shall be compatible in design, theme, materials, and architecture.
ii. Exterior Materials:
[a] All siding shall be brick, split-face concrete masonry unit (CMU), fiber cement board
siding, stone, stucco, decorative precast panels, integrally colored block, or EIFS.
[b] Exception: A structure located in a development that allows the use of vinyl siding on
dwellings, and that has a gross floor area 5,000 square feet or less may use heavygauge vinyl (minimum of 0.042” gauge) siding.
[c] Exception (Ord. #081709, Effective 2/1/2010): A structure used primarily for agricultural
purposes located in an AG or ER Zoning District, and that has a gross floor area five
thousand (5,000) square feet or less may use heavy-gauge vinyl (minimum of 0.042"
gauge), wood, or metal siding. Structures such as but not limited to greenhouses may
use glass as a primary exterior material.
iii. Exterior adjacent to Residential:
[a] The exterior material of all buildings adjacent to residentially zoned or occupied areas
and thoroughfares shall be constructed predominantly of brick, split-face concrete
masonry unit (CMU), stone, or stucco materials with masonry surface and appearance.
[b] Exception: A structure located in a development that allows the use of vinyl siding on
dwellings, and that has a gross floor area 5,000 square feet or less may use heavygauge vinyl (minimum of 0.042” gauge) siding.
[c] Exception (Ord. #081709, Effective 2/1/2010): A structure used primarily for agricultural
purposes located in an AG or ER Zoning District, and that has a gross floor area five
thousand (5,000) square feet or less may use heavy-gauge vinyl (minimum of 0.042"
gauge), wood, or metal siding. Structures such as but not limited to greenhouses may
use glass as a primary exterior material.
PROPOSED MODIFICATION - Article 5.111 Section A. Façade, ii Exterior Materials and iii.
Exterior adjacent to Residential of the Unified Development Ordinance by replacing section “#2
and #3” with the following:
3. Architectural Design Standards: Structures shall reflect the residential character of the area in
which they are established.
a. Facade:
i. Compatibility: Each building may be unique; however, all buildings within the development
shall be compatible in design, theme, materials, and architecture.
ii. Exterior Materials:
[a] All siding shall be brick, split-face concrete masonry unit (CMU), fiber cement board
siding, stone, stucco, decorative precast panels, integrally colored block, EIFS, or high
pressure laminate (HPL) with a decorative surface that is suitable for exteriors.
[b] Exception: A structure located in a development that allows the use of vinyl siding on
dwellings, and that has a gross floor area 5,000 square feet or less may use heavygauge vinyl (minimum of 0.042” gauge) siding.
[c] Exception (Ord. #081709, Effective 2/1/2010): A structure used primarily for agricultural
purposes located in an AG or ER Zoning District, and that has a gross floor area five
thousand (5,000) square feet or less may use heavy-gauge vinyl (minimum of 0.042"
gauge), wood, or metal siding. Structures such as but not limited to greenhouses may
use glass as a primary exterior material.
iii. Exterior adjacent to Residential:
[a] The exterior material of all buildings adjacent to residentially zoned or occupied areas
and thoroughfares shall be constructed predominantly of brick, split-face concrete
masonry unit (CMU), stone, stucco materials with masonry surface and appearance, or
high pressure laminate (HPL) with a decorative surface that is suitable for exteriors.
[b] Exception: A structure located in a development that allows the use of vinyl siding on
dwellings, and that has a gross floor area 5,000 square feet or less may use heavygauge vinyl (minimum of 0.042” gauge) siding.
Page 3 of 4 – Ordinance # 051815, Exhibit “A”
Exhibit “A”
[c] Exception (Ord. #081709, Effective 2/1/2010): A structure used primarily for agricultural
purposes located in an AG or ER Zoning District, and that has a gross floor area five
thousand (5,000) square feet or less may use heavy-gauge vinyl (minimum of 0.042"
gauge), wood, or metal siding. Structures such as but not limited to greenhouses may
use glass as a primary exterior material.
Page 4 of 4 – Ordinance # 051815, Exhibit “A”