PROJECTS
Alcoa
Algoma
Ancaster High School
Apollo Gold (Matheson, Ontario)
Brandon lift Station
Canada Salt (Pugwash, Nova Scotia)
Cementation Canada Inc. (North Bay, Ontario)
Dynatech
Elk Valley Res
EMS --- Port of Montreal
Epcor Towers
FNX Podoslky
Goldcorp (Red Lake, Ontario)
Hilton Niagara Falls
Hotel Mariott Dorval
Hudson Bay Store Winnipeg
J.S. Redpath Limited
Lakeshore Gold (Timmins, Ontario)
Lovat (North York Sewage), (Theresa, Spain)
Lovat (TTC Expansion)
Me Noya Winnipeg Health Center
North American Palladium (Thunder Bay, Ontario)
Northgate Minerals Corp (Matachewan, Ontario)
Picadilly Mine Projects, Picadilly Potash Corp.
Pinnacle Tour A, Pinnacle Tour B
Pratt & Whitney
Raglan’s mining
Rio Tinto Alcan
Sait Temp. Bldg
SeaBee
Sifto Salt (Goderich, Ontario)
Spectra Energy
St-Mary’s Hospital
TCP Press Line
Trelawney Mining & Exploration (Gogama, Ontario)
University of Montreal
Goldcorp (Quebec)
Domtar
GE
Osiko
&High
Medium
POWER TRANSFORMER QUOTE FORM
Specifications
Enclosure
primary
accessories
secondary
PROJECTS
Alcoa
Algoma
Ancaster High School
Apollo Gold (Matheson, Ontario)
Brandon lift Station
Canada Salt (Pugwash, Nova Scotia)
Cementation Canada Inc. (North Bay, Ontario)
Dynatech
Elk Valley Res
EMS --- Port of Montreal
Epcor Towers
FNX Podoslky
Goldcorp (Red Lake, Ontario)
Hilton Niagara Falls
Hotel Mariott Dorval
Hudson Bay Store Winnipeg
J.S. Redpath Limited
Lakeshore Gold (Timmins, Ontario)
Lovat (North York Sewage), (Theresa, Spain)
Lovat (TTC Expansion)
Me Noya Winnipeg Health Center
North American Palladium (Thunder Bay, Ontario)
Northgate Minerals Corp (Matachewan, Ontario)
Picadilly Mine Projects, Picadilly Potash Corp.
Pinnacle Tour A, Pinnacle Tour B
Pratt & Whitney
Raglan’s mining
Rio Tinto Alcan
Sait Temp. Bldg
SeaBee
Sifto Salt (Goderich, Ontario)
Spectra Energy
St-Mary’s Hospital
TCP Press Line
Trelawney Mining & Exploration (Gogama, Ontario)
University of Montreal
Goldcorp (Quebec)
Domtar
GE
Osiko
&High
Medium
POWER TRANSFORMER QUOTE FORM
Specifications
Enclosure
primary
accessories
secondary
PROJECTS
Alcoa
Algoma
Ancaster High School
Apollo Gold (Matheson, Ontario)
Brandon lift Station
Canada Salt (Pugwash, Nova Scotia)
Cementation Canada Inc. (North Bay, Ontario)
Dynatech
Elk Valley Res
EMS --- Port of Montreal
Epcor Towers
FNX Podoslky
Goldcorp (Red Lake, Ontario)
Hilton Niagara Falls
Hotel Mariott Dorval
Hudson Bay Store Winnipeg
J.S. Redpath Limited
Lakeshore Gold (Timmins, Ontario)
Lovat (North York Sewage), (Theresa, Spain)
Lovat (TTC Expansion)
Me Noya Winnipeg Health Center
North American Palladium (Thunder Bay, Ontario)
Northgate Minerals Corp (Matachewan, Ontario)
Picadilly Mine Projects, Picadilly Potash Corp.
Pinnacle Tour A, Pinnacle Tour B
Pratt & Whitney
Raglan’s mining
Rio Tinto Alcan
Sait Temp. Bldg
SeaBee
Sifto Salt (Goderich, Ontario)
Spectra Energy
St-Mary’s Hospital
TCP Press Line
Trelawney Mining & Exploration (Gogama, Ontario)
University of Montreal
Goldcorp (Quebec)
Domtar
GE
Osiko
&High
Medium
POWER TRANSFORMER QUOTE FORM
Specifications
Enclosure
primary
accessories
secondary
power
transformers
V.P.I. PROCESS (VACUUM PRESSURE IMPREGNATION)
The PIONEER dry type power transformer is appropriate for industrial and commercial high
voltage applications (up to 25 KV). Dry type power transformer can be installed near the load
center which is less likely for a liquid filled transformer. Therefore, installation costs are greatly
reduced. Other advantage of dry type power transformer is that the material used is less flammable.
Thereby, risk of fire is lower and this alternative is environmentally safer. Our custom CAD
(computer-assisted-design) OPS software optimizes the technical designs to meet the most
demanding specifications for dry type power transformer. Our design and manufacturing concept
provides an excellent mix of key parameters, high efficiency and longer lifetime which results in
annual savings and lower cost of ownership.
Each PIONEER power transformer coil is impregnated using the V.P.I. process to ensure
that the impregnated materials can penetrate the windings thoroughly. This way each
transformer offers the highest mechanical strength and rapid heat dissipating, this step
prolongs life expectancy.
ADVANTAGES
CHARACTERISTICS (most usual ratings)
COIL
Canadian approvals:
5Kv 10MVa
15Kv 10Mva
25Kv 10Mva
Up to 25 000 volts.
Insulation Class “H”, 220°C used on
all transformers with standard 150°C rise.
Frequency: 60 Hz.
Coils are layer, disk or section windings depending on the voltage class.
All windings coils, designed with wire or foil conductors which minimize Eddy losses
and provide the highest short circuit strength.
CORE
The core consists of high quality cold rolled oriented grain steel with low specific losses.
Core laminations are free of burrs and stacked minimizing tha lamination joint gaps.
Uniform pressing and stiffness ensure low noise level.
Energy efficient C802-2 (latest revision),
NRCAN, UL TP-1 and D.O.E
ASSEMBLING
The coils are held rigidly in place between high compression insulators for the highest ability
t to resist short circuit forces.
Low voltage bus bars bolted to the upper and lower core clamps with standoff insulators
Uniform core lamination, coil compacting and strong mechanical structure ensures low noise level for the transformer during lifetime operation.
Taps: standards 4 taps at 2.5%, 2 over,
and 2 under rated voltage.
Impedance & Audible sound level
designed to CSA C9 and
C22.2-47 standard.
OPTIONS
Copper or Aluminum windings.
Electrostatic shield (s).
Temperature rise: 80°C and 115°C.
Frequency: 50 Hz.
Terminals with flexible connectors.
Lightning arrestors.
Neutral Ground Resistor
Heavy Duty.
Mine Duty.
Forced air cooling fans.
Fan provisions.
Digital thermometer.
Enclosure NEMA 3R.
Custom bus-bar coordination
with circuit breaker
STANDARD PRODUCTION TEST
All Power Transformers tested in accordance with the CSA standards.
•
•
•
•
•
•
Winding resistance measurements.
Voltage ratio measurements.
Polarity.
Exciting current.
No load losses
Load loss and Impedance voltage.
TYPE TEST / OPTIONAL TEST
•
•
•
•
Temperature Rise Test
Sound level.
Basic impulse level (BIL).
Partial Discharge
power
transformers
V.P.I. PROCESS (VACUUM PRESSURE IMPREGNATION)
The PIONEER dry type power transformer is appropriate for industrial and commercial high
voltage applications (up to 25 KV). Dry type power transformer can be installed near the load
center which is less likely for a liquid filled transformer. Therefore, installation costs are greatly
reduced. Other advantage of dry type power transformer is that the material used is less flammable.
Thereby, risk of fire is lower and this alternative is environmentally safer. Our custom CAD
(computer-assisted-design) OPS software optimizes the technical designs to meet the most
demanding specifications for dry type power transformer. Our design and manufacturing concept
provides an excellent mix of key parameters, high efficiency and longer lifetime which results in
annual savings and lower cost of ownership.
Each PIONEER power transformer coil is impregnated using the V.P.I. process to ensure
that the impregnated materials can penetrate the windings thoroughly. This way each
transformer offers the highest mechanical strength and rapid heat dissipating, this step
prolongs life expectancy.
ADVANTAGES
CHARACTERISTICS (most usual ratings)
COIL
Canadian approvals:
5Kv 10MVa
15Kv 10Mva
25Kv 10Mva
Up to 25 000 volts.
Insulation Class “H”, 220°C used on
all transformers with standard 150°C rise.
Frequency: 60 Hz.
Coils are layer, disk or section windings depending on the voltage class.
All windings coils, designed with wire or foil conductors which minimize Eddy losses
and provide the highest short circuit strength.
CORE
The core consists of high quality cold rolled oriented grain steel with low specific losses.
Core laminations are free of burrs and stacked minimizing tha lamination joint gaps.
Uniform pressing and stiffness ensure low noise level.
Energy efficient C802-2 (latest revision),
NRCAN, UL TP-1 and D.O.E
ASSEMBLING
The coils are held rigidly in place between high compression insulators for the highest ability
t to resist short circuit forces.
Low voltage bus bars bolted to the upper and lower core clamps with standoff insulators
Uniform core lamination, coil compacting and strong mechanical structure ensures low noise level for the transformer during lifetime operation.
Taps: standards 4 taps at 2.5%, 2 over,
and 2 under rated voltage.
Impedance & Audible sound level
designed to CSA C9 and
C22.2-47 standard.
OPTIONS
Copper or Aluminum windings.
Electrostatic shield (s).
Temperature rise: 80°C and 115°C.
Frequency: 50 Hz.
Terminals with flexible connectors.
Lightning arrestors.
Neutral Ground Resistor
Heavy Duty.
Mine Duty.
Forced air cooling fans.
Fan provisions.
Digital thermometer.
Enclosure NEMA 3R.
Custom bus-bar coordination
with circuit breaker
STANDARD PRODUCTION TEST
All Power Transformers tested in accordance with the CSA standards.
•
•
•
•
•
•
Winding resistance measurements.
Voltage ratio measurements.
Polarity.
Exciting current.
No load losses
Load loss and Impedance voltage.
TYPE TEST / OPTIONAL TEST
•
•
•
•
Temperature Rise Test
Sound level.
Basic impulse level (BIL).
Partial Discharge
power
transformers
V.P.I. PROCESS (VACUUM PRESSURE IMPREGNATION)
The PIONEER dry type power transformer is appropriate for industrial and commercial high
voltage applications (up to 25 KV). Dry type power transformer can be installed near the load
center which is less likely for a liquid filled transformer. Therefore, installation costs are greatly
reduced. Other advantage of dry type power transformer is that the material used is less flammable.
Thereby, risk of fire is lower and this alternative is environmentally safer. Our custom CAD
(computer-assisted-design) OPS software optimizes the technical designs to meet the most
demanding specifications for dry type power transformer. Our design and manufacturing concept
provides an excellent mix of key parameters, high efficiency and longer lifetime which results in
annual savings and lower cost of ownership.
Each PIONEER power transformer coil is impregnated using the V.P.I. process to ensure
that the impregnated materials can penetrate the windings thoroughly. This way each
transformer offers the highest mechanical strength and rapid heat dissipating, this step
prolongs life expectancy.
ADVANTAGES
CHARACTERISTICS (most usual ratings)
COIL
Canadian approvals:
5Kv 10MVa
15Kv 10Mva
25Kv 10Mva
Up to 25 000 volts.
Insulation Class “H”, 220°C used on
all transformers with standard 150°C rise.
Frequency: 60 Hz.
Coils are layer, disk or section windings depending on the voltage class.
All windings coils, designed with wire or foil conductors which minimize Eddy losses
and provide the highest short circuit strength.
CORE
The core consists of high quality cold rolled oriented grain steel with low specific losses.
Core laminations are free of burrs and stacked minimizing tha lamination joint gaps.
Uniform pressing and stiffness ensure low noise level.
Energy efficient C802-2 (latest revision),
NRCAN, UL TP-1 and D.O.E
ASSEMBLING
The coils are held rigidly in place between high compression insulators for the highest ability
t to resist short circuit forces.
Low voltage bus bars bolted to the upper and lower core clamps with standoff insulators
Uniform core lamination, coil compacting and strong mechanical structure ensures low noise level for the transformer during lifetime operation.
Taps: standards 4 taps at 2.5%, 2 over,
and 2 under rated voltage.
Impedance & Audible sound level
designed to CSA C9 and
C22.2-47 standard.
OPTIONS
Copper or Aluminum windings.
Electrostatic shield (s).
Temperature rise: 80°C and 115°C.
Frequency: 50 Hz.
Terminals with flexible connectors.
Lightning arrestors.
Neutral Ground Resistor
Heavy Duty.
Mine Duty.
Forced air cooling fans.
Fan provisions.
Digital thermometer.
Enclosure NEMA 3R.
Custom bus-bar coordination
with circuit breaker
STANDARD PRODUCTION TEST
All Power Transformers tested in accordance with the CSA standards.
•
•
•
•
•
•
Winding resistance measurements.
Voltage ratio measurements.
Polarity.
Exciting current.
No load losses
Load loss and Impedance voltage.
TYPE TEST / OPTIONAL TEST
•
•
•
•
Temperature Rise Test
Sound level.
Basic impulse level (BIL).
Partial Discharge