Dr. OGUNJUYIGBE, AYODEJI SAMSON OLATUNJI
University of Ibadan
Faculty of Technology
Department of Electrical and Electronic Engineering
Email: aogunjuyigbe@yahoo.com, a.ogunjuyigbe@mail.ui.edu.ng
Mobile No: (+234) 8023504826; +27840584749
I
NAME:
OGUNJUYIGBE, Ayodeji
Samson
Olatunji
DATE:
17th SEPTEMBER, 1968
NATIONALITY
NIGERIAN
MARITAL STATUS
MARRIED (Blessed with 2 Children)
PRESENT POSITION
LECTURER I
II. ACADEMIC QUALIFICATIONS :
1
UNIVERSITY
DEGREE/YEAR
FIELD
Tshwane University of
D.Tech, 2009
Electrical Machines
(Synchronous
Reluctance Machine)
Electric Power/Machines
Technology
2
University of Lagos
3
Bendel State University
4
Ladoke Akintola University
Of Technology
III.
M.Sc (CGPA of
4.52 out of
5.00), 1996
B.Eng.(CGPA of
4.08 out of
5.00), 1991
Dipl. Computer
Studies
Electrical/Electronic
Engineering
Basic Programming
skills in PASCAL
PROFESSIONAL QUALIFICATIONS AND DIPLOMAS:
(i) Member; Nigerian Society of Engineers
IV. SCHOLARSHIPS, FELLOWSHIPS AND PRIZES
(i) Federal Government of Nigeria Postgraduate Scholarship Award for
M.Sc Programme.
(ii) M.Sc with Distinction
V. ACADEMIC HONOURS, DISTINCTION AND AWARD
(i)
Best Graduating Students In Electrical & Electronics Engineering :
Bensu 1991
(ii)
(iii)
Prof. A.K Yesufu‟s Award Winner For Electrical And Electronic
Engineering Department – 1991
M. Sc with Distinction: University of Lagos-1996.
(iv)
TUT Scholarship for doctoral study 2006-2009.
VI.
DETAILS OF TEACHING EXPERIENCE AT UNIVERSITY LEVEL
(i)
Student Assistant - Tshwane University of Technology (2006-2009)
(ii)
Lecturer – University of Ibadan, Ibadan (1998 to Date)( On study
Leave to South Africa )
(iii) Graduate Assistant (1991 – 1992), Assistant Lecturer (1993 – October
1997) and Lecturer II (1997 – 1998); Ladoke Akintola University of
Technology, Ogbomoso ;
(iv) Laboratory Instructor 1995/96 Session; University of Lagos, Akoka –
Lagos.
(v) Student Instructor (NYSC) 1991/92 Session; Federal University of
Technology, Yola
I have taught various courses at the undergraduate level since 1993;
amongst which are:








Electrical Machines III and IV,
Power System Engineering I & II,
Electrical Energy Utilization,
Electromechanical Energy Conversion Devices,
Power Transmission and Distribution,
Basic Electrical Engineering,
Network Analysis,
Reliability Engineering
I have supervised several undergraduate projects amongst which are:





Design and construction of microprocessor based condition
monitoring of Power Transformer (Awobadejo Mayowa)
Simulating and evaluation of distribution losses in Nigeria : Jericho
Undertaking as a case study (Ajayi Biobun)
A 10 year Survey of Nigerian National Grid collapse ( Omotoso
Gbenga)
Design & construction of data acquisition system for substation
control
Remote data acquisition for Energy loss evaluation. (King Gbemi)
2

A critical review of VAR control and principles within Nigeria power
network (Oladimeji Nurudeen)
ADMINISTRATION

IEEE-Africon 07 Session Chair for Electric and Power Systems

Electrical Engineering Departmental project/seminar coordinator

Lecturer in charge of Computer laboratory

Department representative on the following committees:
-
Faculty of Technology consultancy committee
Departmental Finance committee
Faculty student liason committee
University Internet design and Tender committee
COMMUNITY /PUBLIC SERVICE
I took part in the following consultancy services:
 Design, Tender and Installation of UI VSAT
 Design, tender and Installation of UI Internetwork Fibre Optic
Backbone
 Site Engineer for the Schlumberger learning centre at the
University of Ibadan
 The Redesign and Installation of the Public Address System at
LAUTECH Lecture Theatre
 Site Engineer for the LAUTECH Health Centre Project
 Consultant Power Engineer with SGI for Substation reinforcement
in Nigeria.
VII.RESEARCH
(i)
COMPLETED:
Protection assessment of Nigerian power network
10 year review of the Nigeria National grid collapse
Effect of outaging critical lines on optimal reactor location :
NEPA as a case study
Energy loss Evaluation of power distribution system : Jericho
feeder point as a case study
(ii)
IN PROGRESS :
Microcontroller based Solar pumping system for Irrigation in
the Remote Nigeria
Self Excited Reluctance generator with Non-linear loads
Development of GUI for the simulation of Multi-Phase Electric
machines.
Power factor improvement techniques for Three –Phase
Induction Machine
3
(iii)
VIII.
a)
THESIS AND DISSERTATION
(a)
Improved Synchronous Reluctance Machine with Dual Stator
Windings and Capacitance Injection 2009 (D.Tech)
(b)
Effect of Outaging Critical Lines on Optimal Reactor Location:
NEPA 1995 330 kV National Network as a Case Study (M. Sc.
Thesis)
(c)
Effect of Undervoltage on Squirrel Cage Induction Motor and
the Design and Construction of Undervoltage Protecting
Device. 1995 (M.Sc Mini project)
(d)
Floodlighting Design for Bendel State University Sports
Complex 1991(B.Eng. Thesis).
PUBLICATIONS
PUBLISHED PEER REVIEWED ARTICLES
(i)
Ogunjuyigbe, S.O.A and Awosope, C.O.A (2001) ; Real Mode
Solution Of Load Flow Problems : Journal Of Science Engineering And
Technology Vol.8 No 4.
(ii)
Ogunjuyigbe, S.O.A and AWOSOPE, C.O.A (2004); Invariance of
Reactor Location with Outage of Critical Lines: Journal of Applied
Science, Engineering and Technology. Vol. 4(1) pp. 49-54.
(iii)
Gafar ,G.A, Ogunjuyigbe S.O.A (2007); Application of Neural
Network to Load
Forecasting in Nigeria Power System: PJST (Hawaii) . Vol.8 (1) pp. 6872, May 2007.
(iv) Jimoh A.A, Popoola, O and Ogunjuyigbe S.O.A (2007); Towards an
Optimal Performance of Distribution Feeder, In: Proceeding
International Conference on Power Systems, July 23rd -25th 2007, pp.,
University of Lagos, Lagos.
(v)
Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2007); Performance
Enhancement of Synchronous Reluctance Machine Using Split Winding
and Capacitance Injection, In: Proceedings of IEEE-Africon 2007,
pp.1-7, Namibia. DOI: 10:1109/AFRICON.2007.440155.
(vi) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2007); Improving
Synchronous Reluctance Machine Performance by Direct Capacitance
Injection through an Auxiliary Winding, In: Proceeding of the IEEEInternational Conference on Electrical Machines and Systems (ICEMS
2007), paper IMP-05, pp.1055-1060.
DOI:10.1109/ICEMS.2007.4411965
(vii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Dynamic and
Steady State Behavior of a Synchronous Reluctance Machine with
Leading Reactive Power through an Auxiliary Winding; In: Proceeding
4
9th International conference on Modeling and simulation of Electrical
Machines, Converters and Systems (ELECTRIMACS 2008), Quebec,
Canada. June 8-11, 2008. Paper 33-RNSC-512
(viii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Controlled
Capacitance Injection through an Auxiliary Winding for Performance
Enhancement of Synchronous Reluctance Machine. In: Proceeding,
11th International Conference on Optimisation of Electrical and
Electronic Equipment (OPTIM‟08), Brasov, Romania. Pp. 39-44. May
22-24, 2008. DOI:10.1109/OPTIM2008.4602384.
(ix) Ogunjuyigbe S.O.A, Nnachi A.F, Jimoh A.A and Nicolae D.V (2008).
Simulation of Six phase Induction machine split winding Induction
Machine using MATLAB/SIMULINK Environment Journal of Electrical
Engineering (www.jee.ro ) „Politehnica‟ Publishing House, vol. 8(3),
pp. 33-39
(x) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Test Results
on Synchronous Reluctance Machine with Auxiliary winding for leading
Reactive Power Injection In: Proceeding Second IASTED Conference
on Power and Energy Systems (AfricaPES 2009) September 8-10,
2008, Gaborone, Botswana.
(xi) M.C. Muteba,, Jimoh A.A, Nicolae D.V and Ogunjuyigbe S.O.A
(2008). Performance Evaluation of a Three-Phase Induction Machine
with Auxiliary Winding Fed by a Leading Reactive Current. Second
IASTED Conference on Power and Energy Systems (AfricaPES 2009)
September 8-10, 2008, Gaborone, Botswana.
(xii) Ogunjuyigbe S.O.A, Obe E.S, Nicolae D.V and Jimoh A.A (2009).
Synchronous Reluctance Machine with a magnetically coupled Double
three-phase windings. In: Proceeding, 8th International Symposium on
Advanced Electromechanical Motion Systems, EPE chapter “Electric
Drives” (ELECTROMOTION 2009), Lille, France. pp. 1-6. July 1-3,
2009. DOI:10.1109/ELECTROMOTION.2009.5259091
(xiii) Ogunjuyigbe S.O.A, Jimoh A.A, Nicolae D.V and Obe E.S (2010).
Analysis of synchronous reluctance machine with magnetically coupled
three phase windings and reactive power compensation IET Electric
Power Applications, (www.ietdl.org) 2010, Vol. 4(4), pp. 291–303.
DOI: 10.1049/iet-epa.2009.
(xiv)Ogunjuyigbe S.O.A, Jimoh A.A, Nicolae D.V and Obe E.S (2010).
Performance analysis of capacitance compensated dual-stator winding
synchronous reluctance machine. Submitted to International Review of
Electrical Engineering (IREE). (To appear in the April 2010 edition)
5
(b)
ARTICLES UNDER REVIEW
(i)
Ogunjuyigbe S.O.A, Jimoh A.A, (2010). On the development and
performance of synchronous reluctance machine Submitted to Elsevier
Energy Conversion and Management.
(ii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2010). Line start
performance of an Improved Synchronous Reluctance machine
Submitted to IET Electric Power Applications
(iii) Ogunjuyigbe S.O.A, Jimoh A.A, Muteba M.C (2010). Analysis and
experimental validation of a Symmetrical Six phase Induction machine
IX. MAJOR CONFERENCES ATTENDED WITH PAPERS READ ;
8th International Symposium on Advanced Electromechanical
Motion Systems, EPE chapter “Electric Drives” (ELECTROMOTION
2009), Lille, France. July 1-3, 2009.
Second IASTED conference on Power and Energy Systems
(AfricaPES), Botswana, 2008.
IEEE-Africon 2007 Conference, Namibia. September 26th -28th 2007.
International Conference on Power Systems, Lagos-Nigeria. July
23rd -25th 2007.
Ansoft Co-operation Software conference on Engineering Designs
and Analysis on the following simulation tools: Simplorer,
Maxwell2D and 3D, Pexprt, ePhysics Johannesburg (2006).
University Of IOWA Widernet workshop on Wireless Networking and
Web programming Lagos-Nigeria. (2002)
X
COMPUTER SKILLS
Simulation Tools: Matlab/Simulink, Quickfield, Simplorer, Ansoft
Maxwell2D, Power world
Programming Languages and Libraries: Pascal, and FORTRAN.
Applications: Microsoft Office
Operation Systems: Windows.
6