light fittings and lighting fixtures
The firm TREVOS with new
logo and modern LED light
The change of the logotype of the firm
TREVOS to elegant black & white
execution symbolises also its radical
transition to a range of light fittings set with
modern LED sources.
dustproof, water-resistant and
impact-resistant
New type series of light fittings FUTURA
This line continues the successful series of
light fittings PRIMA, which in the execution
for industrial rooms with high lighting
requirements reaches the maximum which can
be achieved using standard linear sources T5.
The LED light fitting FUTURA is innovative
since the start of its development, and it is not
an imperfect solution trying to exploit the
present massive demand for new light sources,
but a really professional solution of the
employment of LED, supported by necessary
certificates (ESČ, ENEC and CB) for sale both
in home and foreign markets.
The disadvantage of competing LED light
fittings intended for industry for protection
from spurting water consists mainly in the
efforts to incorporate the LED modules into
light fittings for standard fluorescent tubes. The
fundamental contradiction is between the
structure of such light fitting and physical
parameters
Fig. 1. Light fitting TREVOS FUTURA
of employed LED light fitting and feeder line.
Such light fitting is not able to remove the
generated heat, which results in ineffective
exploitation of maximum luminous flex of the
LED module, and at the same time, to
appreciable shortening of the total service life
of the light fitting.
FUTURA is a LED light fitting suitable for
industrial environment. It has the
protection IP66, which suits increased
environment temperatures up to 45 °C. In
the fitting there is used a new manner of
removal of heat from electric components
(feeder and LED modules). Into the plastic
base of the light fitting there are
implemented aluminium coolers devised
Tab. 1. Technical data of light fittings Futura
Code
75010
75020
75030
75040
75050
75060
75070
75080
75090
Type
Luminous flux of LED
modules (lm)
(Im)
Lower efficiency of light
fitting
(-)
Luminous flux of light
fitting
(Im)
Input to light fitting Specific output of light
including feeder (W)
fitting
(Im/W)
up to do environment temperature fa = 45 °C –base grey polycarbonate with AI coolers – diffuser translucent
FUTURA 2.2ft PC AI 2600/840
2, 600
0.89
2,314
FUTURA 2.2ft PC AI 3200/840
3,200
0.89
2,848
FUTURA 2.2ft PC AI 4400/840
4,400
0.89
3,916
FUTURA 2.4ft PC AI 5200/840
5,200
0.89
4,628
FUTURA 2.4ft PC AI 6400/840
6,400
0.89
5,696
FUTURA 2.4ft PC AI 8800/840
8,800
0.89
7,832
FUTURA 2.5ft PC AI 6500/840
6,500
0.89
5,785
FUTURA 2.5ft PC AI 8000/840
8,000
0.89
7,120
FUTURA 2.5ft PC AI 11000/840
11,000
0.89
9,790
75050 FUTURA 2.4ft PC AI 6400/840
75060 FUTURA 2.5ft PC AI 8000/840
Properties of the product
guarantee
medium service life
protection
chromaticity temperature
environment temperatures
alternate substitution of fluorescent light fitting
2 x 36 W with conventional ballast
alternate substitution of fluorescent light fitting 2 x 58 W
with conventional ballast
21
28
35
46
56
69
58
70
86
110
102
112
101
102
114
100
102
114
saving of electric power 42 %
saving of electric power 50 %
Characteristics
5 years
50 000 h
IP66
4 000 K
-25 °C/+45 °C
immediate lighting- very suitable for combination with sensors of movement
high resistance to frequent switching
it functions reliably at low temperatures
high mechanical resistance
diffuser of translucent polycarbonate – ensures ideal distribution of luminous flux, reduces dazzling
LIGHT 2014/4
light fittings and lighting fixtures
Light fitting of new type series LINEA
LINEA is an innovative type of interior
LED light fittings, complying both with
high requirements on resistance to
penetration of water and dust and with
aesthetic and decorative criteria.
These light fittings are highly demanded
on the exigent EU market, where they find
application in hospitals, schools, dining
rooms, halls and manufacturing shops with
high requirements on clean environment.
The light fittings LINEA substitute the
fluorescent light fittings of the type series
SM ALS, and concerning their optical
parameters, they supersede them markedly.
The diffusers of these light fittings are made
of translucent polycarbonate, specially
devised for optimum regulation of luminous
flux of installed LED modules.
The specification of the light fittings of
the type LINEA Line is analogous to that of
the light fittings FUTURA and PRIMA
LED. The first digit indicates the total
number of rows of linear LED modules, and
the second digit after the full stop indicates
the overall length of a row of LED modules
in feet (1.4ft, 1.5ft, 2.4ft, 2.5ft). For choice
interior and decorative
Fig. 2. Light fitting TREVOS LINEA
especially for this light fitting (by
technology of injection moulding with
closing shot). Owing to operation of the
cooler, the temperature of light fitting is
maintained below the critical temperature,
which otherwise shortens the service life of
both LED modules and all other electric
components. The situation of the feeder in
the area between the wall of plastic base and
the reflector also helps to provide for
optimum operating conditions, reducing the
mutual temperature influence of the feeder
and the LED module to minimum.
The design of light fitting FUTURA is
based on specific requirements of industrial
plants, and it considers physical properties of
employed materials as well. In compliance
with it is also the location of individual
electric components, system of mechanical
fastening and the principle of mounting the
light fitting.
The resulting set meets the requirement of
resistance to adverse outside factors
(penetration of water, dust - protection
IP66), guarantees perfect safety of proper
operation and maintenance (SELV), provides
for maximum exploitation of irradiated
luminous flux of the proper light source, and
makes effective use of electric power. In
practice it means that the light fittings
suspended at a height up to 10m provide for
uniform, planar and sufficiently intense
lighting without unwanted dazzling.
For easier orientation in the offer of light
fittings FUTURA (Tab. 1), the specification
of their dimensions is analogous to
specification of standard linear LED modules
already used in practice – i.e. by English
length unit, the foot (2ft, 4ft and 5ft). For
selection of the adequate light fitting and for
proper calculation of lighting, the type
LIGHT 2014/4
Fig. 3. Stand of TREVOS on the Light+Building Fair in 2014
designation comprises the total luminous flux
of LED modules directly. When devising a
proposal of illumination, it is therefore easy to
compare this luminous flux with the flux of
linear fluorescent tubes T5 and T8.
The specific output of high-performance
LED modules used in light fittings FUTURA
reaches as much as 128 lm/W. The offer of
these light fittings includes the execution with
control of dimming by systems DALI and
DIMM. If using intelligent systems and
lighting control it is possible to achieve up to
40% saving of energy in comparison with
comparably equipped light fittings with linear
fluorescent tubes.
of an adequate light fitting LINEA, the type
designation indicates the total luminous flux
of LED modules directly. The LED light
fittings of the types FUTURA and LINEA
have been exposed by the firm TREVOS on
the Light+Building Fair 2014 in Frankfurt
on Main, where they have been highly
appreciated
both
by visitors
and
professional public.
TREVOS, a. s. Mašov 34
511 01 Turnov
tel.: +420 481 363 311
fax: +420 481 624 681
e-mail: trevos@trevos.cz
www.trevos.eu