CASAMBI
EXPRESS
CBU-ASD
CBU-TED
Description
You can change your ambiance according to your mood
by dimming, changing the colour of the light or adjust the
colour temperature according to your daylight conditions.
The Casambi devices are smart on their own
The system itself is self healing and in constant
synchronization.
The Casambi devices are connected when needed via
Bluetooth connection. An Internet connection is not
necessary.
The system is intuitive. Very small form factor for luminaire
installation. Just Plug it in the lighting fixture. No other
configurations by a professional technician are needed.
CBU-ASD
CBU-ASD is a wireless control unit for LED and halogen
drivers with 0-10V, 1-10V or DALI dimming interface. The
control output can be configured either as analog 0-10V
(and 1-10V) or digital Standalone DALI control interface.
CBU-ASD can be controlled with Casambi app, available
for iOS and Android devices, as well as with traditional wall
switches.
Accessoires
CBU-TED
Xpress
CBU-TED is a Bluetooth controllable, Casambi enabled
trailing-edge dimmer for operation of incandescent lamps,
dimmable LED lamps and dimmable LED control gear. It
can be installed behind a traditional wall switch, inside a
luminaire or into a ceiling outlet box.
Xpress is a wireless user interface that can be configured
via the Casambi app. The four target buttons can control
a scene or an animation of the user’s choise or simply one
luminaire, one luminaire group or all lamps together if so
desired.
CBU-TED can be controlled with Casambi app, available
for iOS and Android devices, as well as with traditional wall
switches. Different Casambi enabled products can be used
as a simple one luminaire direct control to a complete and
full featured light control system where up to 127 units
form automatically an intelligent mesh network.
PLT PROFESSIONAL LIGHTING TECHNICS CE+T Technics - 17 Rue Hauzeur, B-4031 Angleur (Belgique)
T +32 (0)4 340 46 60 • www.cettechnics.be • info@cettechnics.be • TVA BE-0451.953.484
Descri
• Use timers to turn on and off scenes at predefined times.
ENGLISH
• Define the security of the network. There are four different security levels for access control.
www.casambi.com
CBU-ASD
Being a member of the Casambi solution CBU-TED uses the Casambi Bluetooth Low Energy mesh network to control the luminaires. The strength of mesh network is the perfect control of multiple luminaires in a same network without gateways, routers,
repeaters or extra
wiring. CBU-TED
andLED
other Casambi
family products use Bluetooth Low Energy to form a direct connection
Bluetooth
control
unit for
drivers
between a mobile device and the Casambi product.
Casambi CBU-TED
complements other Casambi enabled products with mains voltage dimming. It is possible to use a single
Warning!
Casambi product to control one luminaire or multiple Casambi products to create a perfect light control system.
Hazardous voltages. Risk of electric
shock or fire. Only qualified professionals CBU-TED
should make the connections. DisconWIRING DIAGRAM
nect the mains power supply and verify
its absence prior to installation.
Wiring Diagram
!
To connect a wire, press
the button on top of the
dimmer and insert the
stripped wire into the
wire hole as far as it goes.
directly powered DALI or 0-10V drivers
L
85-240 VAC
Wiring
diagram,
50-60 Hz
DALI2)/
0-10V
Connected wires can be
released by pressing the
button again.
N
Wall switch or
fixedNote
mains1.
voltage
230 VAC
L N
220-240V~
L
N
N
Suitable for drivers that can be switched off via control interface
DA/+
DA/LED driver
L
Analog / D igital
dimming control
N
Wire info:
Solid and stranded:
0,5-1,5 mm2/16-20 AWG
max. 0.6A
High voltage halogen, AC LED modules,
230
dimmable LED and CFL bulbs
or VAC
trailing
L
edge dimmable LED drivers
Strip length: 6-8 mm
CasambiDIAGRAM
Technologies
Oy
WIRING
CBU-ASD
!
Warning!
Hazardous voltage. Risk of electric
shock. Only qualified professionals
LEDshould
module
make the connections.
Page 1 of 3
Linnoitustie 4 A
02600 Espoo, Finland
www.casambi.com
info@casambi.com
tel. +358 10 501 2950
CBU-TED Fact Sheet v1.0.6
Copyright 2015
Wiring diagram, directly powered DALI or 0-10V drivers
Suitable for drivers that cannot be switched off via control interface
230 VAC
1-10V
L N
N
L
max. 0.6A
Analog / D igital
dimming control
220-240V~
L
N
230 VAC
When
as a po
withou
it poss
temper
CBU-A
an exis
a lighti
CBU-A
Blueto
a large
needed
Install
N
Warning!
Do not connect more than one
kind of load at a time.
CBU-A
dimmin
or digi
+
-
Make s
1,5 mm
Insert
to con
L and
letters
and - s
If you i
outlet
specifi
LED driver
L
N
Ran
External relay
LED module
!
Warning!
Risk of fire. Do not connect
CBU-ASD mains output directly
to LED driver mains input
Dimensions
Mounting
diameter:
PLT PROFESSIONAL LIGHTING TECHNICS CE+T
Technics - 17hole
Rue Hauzeur,
B-4031 Angleur (Belgique)
T +32 (0)4 340 46 60 • www.cettechnics.be • info@cettechnics.be
•
TVA
BE-0451.953.484
2 x 3.5 mm
1)
Range
EXPLICATION SOLUTION CASAMBI
CBU-ASD
Technical facts
CBU-TED
Technical facts
Input
220-240 VAC 50 Hz
0,6 A
Dimming method
Trailing-edge phase control
Max. output current
0,65 A
Input
85-240 VAC 50-60 Hz
0,65 A
Min. load requirement
1W
Mains Output
220-240 VAC 50 Hz
SSR op faselijn
Output 0-10 V
0-10V DC/Dali (1ch/2ch/3ch/4ch)
7mA
Dimensions
56,5 x 35,8 x 22,3 mm
Protection
IP20
Built-in Class II
Output
Incandescent and high voltage
halogen bulbs:
150 W @ 230 VAC
70 W @ 110 VAC
High voltage AC LED modules:
150 W @ 230 VAC
70 W @ 110 VAC
Max. current pulse
4A
Dimensions
40,4 x 36,3 x 14,0 mm
Protection
IP20
Dimmable LED and CFL bulbs:
50 W @ 230 VAC
25 W @ 110 VAC
Dimmable electronic
transformers:
50 W @ 230 VAC
25 W @ 110 VAC
PLT PROFESSIONAL LIGHTING TECHNICS CE+T Technics - 17 Rue Hauzeur, B-4031 Angleur (Belgique)
T +32 (0)4 340 46 60 • www.cettechnics.be • info@cettechnics.be • TVA BE-0451.953.484