700 Series Explosion Proof Emergency Lighting Units

advertisement
JOB NAME:
TYPE NO.:
CATALOG NO.:
700 Series Explosion Proof
Emergency Lighting Units
ORDERING INFORMATION
Catalog Number: Example: 750TD2KL
MODEL NUMBER
Battery
Operating
ModelOutput Type
Mode
730
6V, 28W
NiCad
Normally-Off
785
6V, 85W Pure Lead Normally-Off
750 12V, 50W
NiCad
Normally-Off
714 120V, 14W NiCad
Normally-On
OPTIONS (1)(2)
TD1 15-Min. Retransfer Delay (120V)
TD2 15-Min. Retransfer Delay (277V)
EX Special Input Power (specify)
KL Key Lock Battery Disconnect
(1) Other options available.
(2) Some options may impact UL listing.
HR Fixture
EXK Exit Kit ELVA Head
Refer to HR Fixtures Data Sheet (Form 1256)
for complete details.
OPTIONS
see below
ACCESSORIES
OB3
3-Way, 3/4” Conduit Hub
SEA
Swivel Elbow Arm(3)
HRW
Class 1,Wall Mount Remote Fixture (4)
HRC
Class 1, Ceiling Mount Remote Fixture (4)
HRP
Class 1, Pendant Mount Remote Fixture (4)
SDR
Straight Dome Reflector
AR
25º Angled Dome Reflector
EXK
3-Face Exit Kit (5)
ELVA12 Class 1, 12V Remote Head (6)
ELVA12GB Class 1, 12V Remote Head (Group B) (6)
(3) For connecting HRP Series pendant fixtures to OC3
hubs or 700 Series units.
(4) Specify lamp ID suffix. Refer to “HR-Series Fixtures”.
(5) Connects to HR-Series lighting fixtures. Available with
red letters only.
(6) Supplied with 12V, 12W MR16 halogen lamp.
SPECIFICATIONS
Construction
Installation
Illumination
Electronics
Power
Consumption
Battery
Code
Compliance
Warranty
Housing: Heavy duty, copper-free cast aluminum housing with screw-on cover designed and constructed to withstand the pressure of explosions caused by an internal arc without propagating them into the hazardous atmosphere.
Mounting: Units are designed for wall mounting by means of external housing
ears using 1/2” mounting hardware.
Wiring: Surface wiring is provided for by three threaded openings in the unit housing for the attachment of 3/4” rigid conduit.
Optional lighting fixtures are available for attachment directly to the unit
housing or for operation remotely.
• Dual input 120/277VAC, 60 Hz
• AC Lockout protection
• AC-On indicator light and test switch • Low voltage battery disconnect
• Automatic charger and transfer circuit • Automatic brownout protection
Input Power: 15W (maximum charge)
Output Power: 14W to 85W depending on model.
Pure lead (785) or nickel cadmium (730, 750, 714) sealed maintenance free
battery. Operating temperature range model 785: 65ºF to 86ºF (19ºC to 30ºC).
Operating temperature range models 730, 750, 714: 20ºF to 95ºF (-7ºC to 35ºC).
Provides a minimum of 90 minutes of emergency illumination.
700 Series units meet NEC Class I, Division 1, Groups C&D, Zones 0, 1 & 2,
Groups IIA, IIB+H2 & IIC; Class I, Division 2, Groups C&D, Zone 2, Groups
IIA, IIB+H2 & IIC; Class II, Division 1, Groups EF&G; Class II, Division 2, Groups
F&G and Class III hazardous location requirements. All models are UL924,
UL1203, UL1604, UL844 Listed and meet NFPA 101, NEC, BOCA, OSHA, IBC, State and local Codes
Limited 3-year warranty. 3-year pure lead or 5-year nickel cadmium prorata battery warranty
Specifications are subject to change without notice. Consult website for latest version of this spec sheet.
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 • 800-334-2212 •www.crescentlighting.com
Crescent is a Philips company
PRODUCT FEATURES
• 6VDC, 12VDC and 120VAC output models offered
• Corrosion-resistant, high strength cast aluminum housing
• Operates attached or remotely mounted fixtures
• 714 model provides normally-on load operation
• Provisions for direct attachment of one or two lighting
fixtures/exit sign combinations
• Maintenance-free nickel cadmium battery provided on
714, 730 and 750 models
• Maintenance-free pure lead battery provided on 785 model
• 90 minutes of emergency illumination
• Universal 120/277VAC input
• Fully automatic battery charger
• Automatic low voltage battery disconnect
• Automatic brownout protection
• AC lockout feature reduces installation time
• Momentary test switch and AC ready indicator
• Meets NFPA Life Safety Code 101, NEC and OSHA
• UL924, UL1203, UL1604 and UL844 listed
DIMENSIONS
83/4”
22.2cm
15”
38.1cm
6”
12”
15.2cm
10”
30.5cm
25.4cm
13”
33.0cm
31/2”
8.9cm
NOTE: Dimensions and specifications subject to change without notice.
Form 1129A 04/12 © 2006 Philips group
Download