Parts for Trucks, Trailers & Buses
11
®
FASTENERS
Proven, reliable and
always innovative.
TRP® offers reliable
aftermarket products
that are designed
and tested to exceed
customers’ expectations
regardless of the vehicle
make, model or age.
BOLTS • Clips • GROMMETS •
inserts • nuts • sCrews • washers
Tested. Reliable. Guaranteed.
Fasteners
Choosing the right
replacement part or service for
your vehicle—whether you own
one, or a fleet—is one of the
most important decisions you
can make for your business.
And, with tested TRP® parts
it’s an easy decision.
Regardless of the make
you drive, TRP® quality
replacement parts are
engineered to fit your truck,
trailer or bus. Choose the
parts that give you the best
value for your business. Check
them out at an approved
TRP® retailer near you.
TABLE OF CONTENTS
FASTENERS
Fastener Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4
Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-6
Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-39
Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-44
Cotter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-45
Fastener Assortment for HWU10000 . . . . . . . . . . . .11-48
Fastener Assortment for HWU11301 . . . . . . . . . . . .11-50
Grommets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-53
Huck Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-54
Huck Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-56
Huck Fastener Tools . . . . . . . . . . . . . . . . . . . . . . . . .11-57
Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-59
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-66
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-67
Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-86
The cross reference information in this
catalog is based upon data provided
by several industry sources and our
partners. While every attempt is made
to ensure the information presented
is accurate, we bear no liability due to
incorrect or incomplete information.
Product Availability
Due to export restrictions and market
demands, not all products are
always available in every location.
Check for availability in your area
with your local TRP® Distributor.
No part of this marketing material may be
reproduced in any manner without written
permission from TRP® North America.
TRP100EN-A
TRP® North America
750 Houser Way N.
Renton, WA 98057
www.trpparts.com
www.trpparts.com
11
Contents
Rivets . . . . . . . . . . . . . . . . . . . . . . . . 11-87
Screws . . . . . . . . . . . . . . . . . . . . . . . . 11-94
Spacers . . . . . . . . . . . . . . . . . . . . . . 11-112
Specialty Bolts . . . . . . . . . . . . . . . . . 11-113
Straps . . . . . . . . . . . . . . . . . . . . . . . 11-118
U-Bolts . . . . . . . . . . . . . . . . . . . . . . . 11-119
FASTENERS
Washers . . . . . . . . . . . . . . . . . . . . . 11-120
TRP100EN-A
Contents
11-3
Fasteners
11
FASTENERS GUIDE
Fastener Guide
Grade 2
Grade 5
Grade 8
Table 11-1: Fasteners - Fastener Guide
Standard
IFI Fastener
Standards,
6th Ed.
Grade 2
Markings
Grade 5
Nuts milled from
bar stock:
ASTM A563
MIL-S-1222H
11-4
Grade 8
Nuts milled from
bar stock:
FASTENERS
SAE J995
Description
Grade 2 nuts are not required to be marked for grade
identification. Grade 5 nuts shall be marked for grade
identification with a dot and a radial or circumferential
line at 120º counterclockwise from the dot. Grade 8
nuts shall be marked for grade identification with a dot
and a radial or circumferential line at 60º counterclockwise from the dot. Nuts fabricated by cutting from hex
bar stock shall be grade marked with notches at the
hexagon corners, one notch at each corner for Grade
5, two notches at each corner for Grade 8.
No Marking
Required
No Marking
Required for
Grades O, A,
and B
No Marking
Required
Fasteners Guide
SAE Grade 2 nuts need not be marked. SAE Grade 5
and 8 nuts are required to be grade identified, using
the “clock” marking system. A dot is located at one
corner on the top surface to indicate 12 o’clock and a
radial line is placed at the 5 and 9 o’clock position to
identify Grades 5 and 8, respectively. Nuts which are
milled from the bar on screw machines are normally
grade identified with small notches cut into the corners
of the hex, one for Grade 2, two for Grade 8.
Grades C, C3
Grades D, DH,
DH3
Grade O, A, and B are not required to be marked unless specidied. When specified, the mark shall be the
grade letter symbol on one face of the nut. Grade C
nuts shall be marked on one face with
three circumferential marks 120º apart. Grade C3 nuts
shall be marked on one face with three circumferential
marks 120º apart and the numeral 3. Grades, D, DH,
and DH3 shall be marked with
the grade letter symbol on one face.
Grade 2 nuts are not required to be marked for grade
identification. Grade 5 nuts shall be marked with three
circumferential dashes equally spaced 120º apart.
Grade 8 nuts shall be marked with six circumferential
dashes equally spaced 60º apart.
11
Fasteners
Standard
Grade 2
Class 8
ISO 898/2
Markings
Grade 5
Class 9
Description
Grade 8
Class 10
Nuts of thread diameters greater than or equal to 5mm
and property class equal to or higher than Class 8
shall be marked on one surface with the class identification number. Alternately, these may be marked wi
the “clockface” system which consists of a dot at one
corner to indicate 12 o’clock and a radial line placed at
the appropriate clock position.
FASTENERS
Nuts marked with one notch at the hexagon corners,
shown at right, indicates a left-handed thread.
TRP100EN-A
Fasteners Guide
11-5
Fasteners
11
BOLTS
Washers
See Page 11-120
Bolt Kit
Table 11-2: Fasteners - Bolt Kit
Part No.
HWC04360
HWC06180
HWC04360
Measurement
Hex Bolt, M12-1.75 x 50, Polished Stainless Steel
5/16"-18 x 1-1/4", Hex Bolt Polished Stainless Steel
Unit of Measure
Metric
U.S.
Qty.
4
10
hex Bolts (MetriC)
FASTENERS
HWC06398
HWC04480
Table 11-3: Fasteners - Hex Bolts (Metric)
Part No.
HWC01097
HWC01169
HWC01225
HWC04044
HWC04177
HWC04203
HWC04262
HWC04264
HWC04266
HWC04268
HWC04274
HWC04338
HWC04340
HWC04341
HWC04344
11-6
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Bolts
Material/Finish
Stainless Steel
Stainless Steel w/Nylon Patch
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel w/Nylon Patch
Stainless Steel
Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Stainless Steel
Size
M8-1.25 x 30mm
M8-1.25 x 30mm
M10-1.50 x 60mm
M8-1.25 x 30mm
M12-1.75 x 60mm
M8-1.25 x 20mm
M10-1.50 x 30mm
M10-1.50 x 40mm
M10-1.50 x 40mm
M10-1.50 x 50mm
M12-1.75 x 120mm
M12-1.75 x 100mm
M12-1.75 x 110mm
M12-1.75 x 150mm
M12-1.75 x 120mm
Qty.
10
4
2
5
2
4
10
4
4
4
1
2
2
25
2
Part No.
HWC04346
HWC04348
HWC04350
HWC04352
HWC04354
HWC04356
HWC04358
HWC04360
HWC04362
HWC04366
HWC04370
HWC04372
HWC04374
HWC04378
HWC04382
HWC04422
HWC04460
HWC04464
HWC04466
HWC04468
HWC04472
HWC04476
HWC04478
HWC04480
HWC04482
HWC04484
HWC04486
HWC04490
HWC04492
HWC04498
HWC04500
HWC04522
HWC04524
HWC04526
HWC04528
HWC04530
TRP100EN-A
Fasteners
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel w/Nylon Patch
Polished Stainless Steel w/Nylon Patch
Polished Stainless Steel
Stainless Steel Black
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel w/Nylon Patch
Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel w/Nylon Patch
Polished Stainless Steel w/Nylon Patch
Stainless Steel Black
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Stainless Steel w/Nylon Patch
Size
M12-1.75 x 130mm
M12-1.75 x 130mm
M12-1.75 x 180mm
M12-1.75 x 180mm
M12-1.75 x 40mm
M12-1.75 x 45mm
M12-1.75 x 50mm
M12-1.75 x 50mm
M12-1.75 x 70mm
M12-1.75 x 70mm
M12-1.75 x 80mm
M12-1.75 x 45mm
M12-1.75 x 50mm
M12-1.75 x 60mm
M12-1.75 x 50mm
M16-2.00 x 50mm
M6-1.00 x 30mm
M6-1.00 x 20mm
M6-1.00 x 20mm
M6-1.00 x 50mm
M6-1.00 x 25mm
M6-1.00 x 30mm
M6-1.00 x 10mm
M6-1.00 x 25mm
M6-1.00 x 30mm
M6-1.00 x 35mm
M6-1.00 x 40mm
M6-1.00 x 45mm
M6-1.00 x 30mm
M6-1.00 x 25mm
M6-1.00 x 25mm
M8-1.25 x 40mm
M8-1.25 x 40mm
M8-1.25 x 50mm
M8-1.25 x 60mm
M8-1.25 x 100mm
Bolts
Qty.
1
1
1
1
4
4
4
4
4
2
2
4
4
4
4
2
10
50
10
4
25
4
10
10
10
5
4
4
15
4
10
10
4
4
5
2
11-7
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWC04534
HWC04536
HWC04540
HWC04542
HWC04568
HWC04606
HWC04687
HWC04709
HWC04847
HWC04849
HWC06396
HWC06398
HWC06402
HWC06404
HWC06444
HWC06446
HWC06565
HWC06716
HWC07051
HWC12465
HWC12478
11
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel w/Nylon Patch
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Plain
Plain
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel w/Nylon Patch
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel w/Nylon Patch
Size
M8-1.25 x 25mm
M12-1.75 x 140mm
M12-1.75 x 170mm
M12-1.75 x 40mm
M12-1.75 x 90mm
M10-1.50 x 30mm
M10-1.50 x 50mm
M8-1.25 x 125mm
M8-1.25 x 120mm
M20-2.50 x 100mm
M8-1.25 x 12mm
M8-1.25 x 16mm
M8-1.25 x 12mm
M8-1.25 x 16mm
M8-1.25 x 20mm
M8-1.25 x 25mm
M6-1.00 x 35mm
M6-1.00 x 60mm
M10-1.50 x 35mm
M8-1.25 x 20mm
M6-1.00 x 20mm
Qty.
10
1
25
4
2
4
1
1
2
1
2
10
10
10
10
4
10
10
6
20
10
Material/Finish
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Size
5/16"-24 x 1-1/2"
1/2"-20 x 1-3/4"
1/4"-20 x 1-1/4"
1/4"-28 x 1-1/4"
1/4"-28 x 1-3/4"
5/16"-18 x 1-1/4"
1/4"-20 x 3/4"
1/4"-28 x 1"
Qty.
2
4
4
15
25
15
15
25
hex Bolts (u.s.)
Table 11-4: Fasteners - Hex Bolts (U.S.)
Part No.
HWC01102
HWC01254
HWC01328
HWC01342
HWC01344
HWC01560
HWC01982
HWC01986
11-8
Thread Standard
UNF
UNF
UNC
UNF
UNF
UNC
UNC
UNF
Bolts
Part No.
HWC01990
HWC04144
HWC04485
HWC04614
HWC06034
HWC06036
HWC06058
HWC06116
HWC06148
HWC06164
HWC06180
HWC06244
HWC06436
HWC06440
HWC06522
HWC06548
HWC06552
HWC06556
HWC06588
HWC06606
HWC06608
HWC06700
HWC06783
HWC07017
HWC07362
HWC10040
HWC10043
HWC12017
HWU10127
HWU10153
HWU10179
HWU10205
HWU10218
HWU10231
TRP100EN-A
Fasteners
Thread Standard
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel w/Nylon Patch
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel
Polished Stainless Steel w/Nylon Patch
Polished Stainless Steel
Polished Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Size
1/4"-28 x 3/4"
1/4"-20 x 1-1/2"
1/4"-20 x 1-1/4"
1/4"-20 x 1"
3/8"-16 x 1-1/4"
1/2"-13 x 1-3/4"
3/8"-16 x 3/4"
1/4"-20 x 1"
3/8"-16 x 7/8"
5/16"-18 x 5/8"
5/16"-18 x 1-1/4"
5/8"-11 x 1-3/4"
5/16"-18 x 2-3/4"
3/8"-16 x 1-1/2"
1/2"-13 x 2-1/4"
1/4"-20 x 3/4"
1/4"-20 x 5/8"
1/4"-20 x 1/2"
3/8"-16 x 2"
5/16"-18 x 1"
5/16"-18 x 1-3/4"
1/4"-20 x 1-3/4"
1/2"-13 x 2"
3/8"-16 x 1"
3/8"-16 x 2-1/2"
5/16"-18 x 3/4"
5/16"-18 x 2-1/4"
5/16"-18 x 7/8"
1/4"-20 x 1"
5/16"-18 x 1"
5/16"-18 x 1-1/2"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-16 x 1-1/2"
Bolts
Qty.
10
5
10
5
5
4
10
5
10
25
10
4
2
5
4
10
15
10
4
10
4
25
2
4
4
25
10
10
50
50
50
25
25
25
11-9
FASTENERS
11
Fasteners
Part No.
HWU10244
HWU10140
HWU10166
HWU10114
11
Thread Standard
UNC
UNC
UNC
UNC
Material/Finish
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Size
3/8"-16 x 2"
1/4"-20NC x 1-1/4"
5/16"-18NC x 1-1/4"
1/4"-20NC x 3/4"
Qty.
25
50
50
50
hex FlanGe Bolts (u.s.)
HWU20220
Table 11-5: Fasteners - Hex Flange Bolts (U.S.)
FASTENERS
Part No.
HWC01110
HWC01112
HWC01114
HWC06262
HWC06532
HWC06662
HWU10116
HWU10259
HWU10285
HWU10402
HWU10415
HWU10441
HWU10467
HWU10493
HWU10532
HWU11839
HWU11841
HWU11843
HWU11845
HWU11847
11-10
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Size
5/8"-11 x 2-1/2"
5/8"-11 x 2-1/4"
5/8"-11 x 3"
1/4"-20 x 3/4"
1/2"-13 x 2-1/4"
1/2"-13 x 2-3/4"
3/8"-16 x 1-1/4"
1/2"-13 x 1-1/2"
1/2"-13 x 2"
5/8"-11 x 1-1/2"
5/8"-11 x 1-3/4"
5/8"-11 x 2-1/4"
5/8"-11 x 2-3/4"
5/8"-11 x 3-1/2"
3/4"-10 x 2"
3/4"-16 x 2"
3/4"-16 x 2-1/2"
3/4"-16 x 2-3/4"
3/4"-16 x 3-1/4"
3/4"-16 x 3-1/2"
Qty.
4
10
4
25
10
1
50
50
25
25
25
25
25
25
20
10
10
10
10
10
Part No.
HWU11849
HWU11851
HWU11853
HWU11855
HWU11857
HWU11859
HWU11861
HWU11863
HWU11865
HWU11867
HWU11869
HWU11881
HWU11883
HWU11885
HWU11887
HWU11889
HWU11891
HWU11893
HWU11895
HWU11897
HWU11899
HWU11901
HWU11903
HWU11905
HWU20103
HWU20129
HWU20155
HWU20207
HWU20220
HWU20233
HWU20272
HWU20298
HWU20311
HWU20324
HWU20337
HWU20389
TRP100EN-A
Fasteners
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Size
3/4"-16 x 4"
1/2"-20 x 1-1/4"
1/2"-20 x 1-1/2"
1/2"-20 x 1-3/4"
1/2"-20 x 2"
1/2"-20 x 2-1/4"
1/2"-20 x 2-1/2"
1/2"-20 x 2-3/4"
1/2"-20 x 3"
1/2"-20 x 3-1/2"
1/2"-20 x 4"
5/8"-18 x 1-1/2"
5/8"-18 x 1-3/4"
5/8"-18 x 2"
5/8"-18 x 2-1/4"
5/8"-18 x 2-1/2"
5/8"-18 x 2-3/4"
5/8"-18 x 3"
5/8"-18 x 3-1/4"
5/8"-18 x 3-1/2"
5/8"-18 x 3-3/4"
5/8"-18 x 4"
5/8"-18 x 4-1/2"
5/8"-18 x 5"
3/8"-16 x 1"
3/8"-16 x 1-1/2"
3/8"-16 x 2"
3/8"-16 x 3"
3/8"-16 x 3-1/2"
1/2"-13 x 1"
1/2"-13 x 1-3/4"
1/2"-13 x 2-1/4"
1/2"-13 x 2-1/2"
1/2"-13 x 2-3/4"
1/2"-13 x 3"
5/8"-11 x 1-1/4"
Qty.
10
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
50
50
50
50
50
50
25
25
25
25
25
25
Bolts
11-11
FASTENERS
11
Fasteners
11
Part No.
HWU20506
HWU20558
HWU20584
HWU20597
HWU20610
Thread Standard
UNC
UNC
UNC
UNC
UNC
Material/Finish
Plain
Plain
Plain
Plain
Plain
Size
5/8"-11 x 4"
3/4"-10 x 2-1/2"
3/4"-10 x 3"
3/4"-10 x 3-1/2"
3/4"-10 x 4"
Qty.
25
20
20
20
20
Grade 5 hex Bolts (u.s.)
Table 11-6: Fasteners - Hex Bolts - Grade 5 (U.S.)
FASTENERS
Part No.
HWC04863
HWC12565
HWC01023
HWC01092
HWC01184
HWC01200
HWC01204
HWC01210
HWC01220
HWC01244
HWC01250
HWC01258
HWC01260
HWC01268
HWC01274
HWC01296
HWC01298
HWC01302
HWC01320
HWC01348
HWC01362
11-12
Thread Standard
UNC
UNC
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNF
UNF
Bolts
Material/Finish
Zinc Clear Iridite
Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium
Plain
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Chrome
Chrome
Cadmium Zinc
Size
5/8"-11NC x 3", Full Thread
5/16"-18NC x 2-1/4"
1/2"-20 x 6-1/2"
3/8"-16 x 2-1/4"
1/2"-13 x 2"
1/2"-13 x 1-1/2"
1/2"-13 x 1-1/4"
1/2"-13 x 2-1/2"
1/2"-13 x 3"
1/2"-20 x 1-1/2"
1/2"-20 x 1-3/4"
1/2"-20 x 2-1/2"
1/2"-20 x 2-1/4"
1/2"-20 x 2"
1/2"-20 x 3"
1/2"-20 x 6-1/2"
1/2"-20 x 6"
1/2"-20 x 7"
1/4"-20 x 1-1/4"
1/4"-28 x 3/4"
1"-12 x 2"
Qty.
5
50
4
10
25
4
25
15
25
25
25
10
10
25
10
2
4
4
50
10
2
Part No.
HWC01398
HWC01432
HWC01456
HWC01460
HWC01478
HWC01482
HWC01496
HWC01500
HWC01510
HWC01514
HWC01518
HWC01520
HWC01530
HWC01550
HWC01566
HWC01574
HWC01580
HWC01584
HWC01592
HWC01604
HWC01606
HWC01612
HWC01616
HWC01628
HWC01632
HWC01634
HWC01640
HWC01676
HWC01694
HWC01702
HWC01704
HWC01706
HWC01714
HWC01718
HWC01720
HWC01728
HWC01768
TRP100EN-A
Fasteners
Thread Standard
UNC
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNF
UNF
UNF
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
Material/Finish
Plain
Plain
Plain
Plain
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium
Plain
Plain
Plain
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Plain
Cadmium Zinc
Plain
Plain
Plain
Plain
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Plain
Size
3/4"-10 x 3-3/4"
3/4"-16 x 3-1/2"
3/4"-16 x 4-1/2"
3/4"-16 x 6-1/2"
3/8"-24 x 1"
3/8"-24 x 3"
3/8"-16 x 1-1/2"
3/8"-16 x 1-3/4"
3/8"-24 x 2-1/2"
3/8"-24 x 2-3/4"
3/8"-24 x 1-1/2"
3/8"-24 x 1-1/4"
3/8"-24 x 3-1/2"
5/16"-18 x 2-1/2"
5/16"-18 x 1"
5/16"-18 x 3/4"
5/16"-24 x 1-1/2"
5/16"-24 x 2-1/4"
5/16"-24 x 4-1/2"
5/8"-11 x 2-3/4"
5/8"-11 x 2"
5/8"-11 x 7-1/2"
5/8"-18 x 1-1/2"
5/8"-18 x 2-1/4"
5/8"-18 x 2-3/4"
5/8"-18 x 2"
5/8"-18 x 3-3/4"
5/8"-18 x 7"
7/16"-14 x 2"
7/16"-14 x 1-1/2"
7/16"-14 x 1-1/2"
7/16"-14 x 1-1/4"
7/16"-14 x 2-1/2"
7/16"-14 x 4-1/2"
7/16"-14 x 5"
7/16"-20 x 1-1/2"
7/8"-14 x 4-1/2"
Qty.
4
4
4
2
25
25
2
25
25
25
25
25
10
25
25
25
4
10
2
4
10
1
10
10
10
10
5
4
10
25
25
15
25
5
4
15
2
Bolts
FASTENERS
11
11-13
Fasteners
FASTENERS
Part No.
HWC01778
HWC01780
HWC01806
HWC01812
HWC01828
HWC01922
HWC01980
HWC01984
HWC01988
HWC02008
HWC02010
HWC02028
HWC02040
HWC02050
HWC04018
HWC04062
HWC04079
HWC04092
HWC04097
HWC04098
HWC04158
HWC04170
HWC04181
HWC04263
HWC04517
HWC04546
HWC04585
HWC04616
HWC06004
HWC06006
HWC06008
HWC06012
HWC06046
HWC06065
HWC06088
HWC06096
11-14
11
Thread Standard
UNF
UNF
UNC
UNC
UNF
UNF
UNC
UNF
UNF
UNF
UNC
UNF
UNF
UNF
UNC
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNC
UNC
UNC
UNC
UNF
UNC
UNC
UNC
Bolts
Material/Finish
Plain
Plain
Cadmium Zinc
Plain
Plain
Chrome
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Plain
Cadmium Zinc
Zinc
Cadmium
Plain
Cadmium
Cadmium
Cadmium
Cadmium w/ Nylon Patch
Cadmium w/ Nylon Patch
Plain
Plain
Cadmium
Cadmium w/ Nylon Patch
Cadmium
Plain
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc Black
Zinc
Zinc
Size
7/8"-14 x 4-3/4"
7/8"-14 x 4"
9/16"-12 x 1-1/2"
9/16"-12 x 2"
3/4"-16 x 2-1/2"
1/4"-28 x 1"
1/4"-20 x 3/4"
1/4"-28 x 1"
1/4"-28 x 3/4"
3/4"-16 x 4"
3/8"-16 x 1-1/4"
5/16"-24 x 2-1/4"
5/8"-18 x 4-1/2"
5/16"-24 x 1-3/4"
5/16"-18 x 2-1/4"
7/16"-20 x 1-3/4"
3/4"-16 x 7"
7/16"-20 x 4"
3/8"-16 x 2-1/4"
3/8"-16 x 2-1/2"
3/8"-16 x 1-1/4"
3/8"-16 x 3/4"
3/8"-16 x 1-1/2"
7/16"-14 x 5-1/2"
3/8"-16 x 3/4"
3/8"-16 x 1-1/2"
3/8"-16 x 3"
3/8"-24 x 5-1/2"
1/4"-20 x 3/4"
1/4"-20 x 1-1/4"
1/4"-20 x 2"
3/8"-16 x 1-1/2"
1/2"-20 x 3-1/2"
3/8"-16 x 1-1/4"
1/4"-20 x 1-3/4"
1/4"-20 x 1-1/2"
Qty.
2
2
15
10
4
50
25
25
25
4
50
10
2
25
2
25
1
15
10
25
25
5
4
10
25
10
10
1
50
50
25
50
15
50
25
25
Fasteners
Part No.
Thread Standard
HWC06105
UNC
HWC06106
HWC06112
HWC06114
HWC06130
HWC06138
HWC06176
HWC06202
HWC06214
HWC06246
HWC06420
HWC06422
UNF
UNF
UNC
UNF
UNF
UNC
UNC
UNF
UNC
UNF
UNF
HWC06460
UNC
HWC06498
HWC06500
HWC06502
HWC06515
HWC06518
HWC06536
HWC06538
HWC06564
HWC06572
HWC06582
HWC06584
HWC06586
HWC06598
HWC07215
HWC07356
HWC07634
HWC09214
HWC12541
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNC
TRP100EN-A
Material/Finish
Size
1/4"-20 x 1", w/ Locking
Zinc
Head
Zinc
1/4"-28 x 1-1/4"
Zinc
1/4"-28 x 1"
Cadmium Zinc
1/4"-20 x 2-3/4"
Zinc
3/8"-24 x 1-1/4"
Zinc
3/8"-24 x 3-1/4"
Zinc
5/16"-18 x 1-1/2"
Zinc
7/16"-14 x 1-1/4"
Zinc
7/16"-20 x 1-1/4"
Zinc
7/16"-14 x 2-1/2"
Zinc
3/8"-24 x 1-1/2"
Zinc
3/8"-24 x 2-3/4"
5/16"-18 x 1" Indented Hex,
Zinc
w/ Lock Washer
Zinc
1/4"-20 x 1/2"
Zinc
1/4"-20 x 1"
Plain
5/8"-11 x 4"
Plain
1/2"-13 x 1-1/2"
Zinc Yellow
5/8"-18 x 6-1/2"
Zinc
1/2"-20 x 3-3/4"
Plain
1/2"-20 x 5"
Plain
3/4"-16 x 5"
Zinc
3/8"-16 x 2-1/2"
Zinc
3/8"-16 x 1-1/4"
Zinc
5/16"-18 x 1-3/4"
Zinc
3/8"-16 x 2"
Zinc
3/8"-16 x 1"
Cadmium w/ Nylon Patch
3/8"-16 x 5"
Zinc Yellow
#10-32 x 3/4"
Zinc w/ Nylon Patch
5/16"-24 x 3/4"
Cadmium
5/8"-18 x 1"
Cadmium Zinc
5/16"-18 x 1-1/4"
Qty.
25
100
75
1
50
15
10
50
25
25
25
25
3
50
75
4
10
4
10
10
4
50
75
50
50
15
10
15
50
2
25
Bolts
FASTENERS
11
11-15
Fasteners
11
Grade 8 Bolts (u.s.)
Table 11-7: Fasteners - Bolts - Grade 8 (U.S.)
Part No.
HWC01076
HWC01078
HWC01080
HWC01082
HWC01116
HWC01137
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Zinc Yellow
Size
1/2"-13NC x 1-1/2"
1/2"-13NC x 1-3/4"
1/2"-13NC x 2"
1/2"-13NC x 2-1/2"
5/8"-11NC x 3-1/2"
1/2"-13NC x 3"
Qty.
10
10
10
10
4
4
Grade 8 hex Bolts (u.s.)
FASTENERS
HWU00101
Table 11-8: Fasteners - Hex Bolts - Grade 8 (U.S.)
Part No.
HWC01046
HWC01074
HWC01108
HWC01133
HWC01170
HWC01174
HWC01216
HWC01242
HWC01246
HWC01266
HWC01286
HWC01349
HWC01364
HWC01368
11-16
Thread Standard
UNF
UNF
UNC
UNF
UNF
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Bolts
Material/Finish
Plain
Plain
Zinc Yellow
Plain
Plain
Plain
Plain
Cadmium Zinc
Plain
Cadmium Zinc
Zinc Yellow
Cadmium
Plain
Plain
Size
7/8"-14 x 6-1/2"
1/2"-20 x 2-1/2"
5/8"-11 x 2" Full Thread
1/2"-20 x 1-3/8"
1"-12 x 2-1/2"
1"-12 x 4-1/2"
1/2"-13 x 2"
1/2"-20 x 6"
1/2"-20 x 1-1/2"
1/2"-20 x 2"
1/2"-20 x 4"
1/2"-20 x 6"
1"-12 x 3-1/2"
1"-12 x 4"
Qty.
1
10
4
4
2
1
25
4
10
10
10
1
1
2
Part No.
HWC01370
HWC01376
HWC01380
HWC01396
HWC01420
HWC01424
HWC01430
HWC01440
HWC01458
HWC01470
HWC01492
HWC01540
HWC01602
HWC01618
HWC01620
HWC01626
HWC01636
HWC01644
HWC01648
HWC01652
HWC01658
HWC01662
HWC01670
HWC01678
HWC01730
HWC01736
HWC01740
HWC01742
HWC01746
HWC01756
HWC01764
HWC01766
HWC01770
HWC01774
HWC01776
HWC01782
TRP100EN-A
Fasteners
Thread Standard
UNF
UNC
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNF
UNF
UNF
UNF
Material/Finish
Plain
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Plain
Cadmium Zinc
Cadmium Zinc
Plain
Cadmium Zinc
Cadmium Zinc
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Plain
Plain
Plain
Plain
Plain
Plain
Cadmium Zinc
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Size
1"-12 x 5"
3/4"-10 x 2-1/2"
3/4"-16 x 3-1/4"
3/4"-10 x 2"
3/4"-16 x 2-1/2"
3/4"-16 x 2-3/4"
3/4"-16 x 2"
3/4"-16 x 3"
3/4"-16 x 5"
3/4"-16 x 7-1/2"
3/8"-16 x 1-1/4"
5/16"-24 x 1"
5/8"-11 x 1-1/2"
5/8"-18 x 1-1/2"
5/8"-18 x 1-3/4"
5/8"-18 x 2-1/2"
5/8"-18 x 2"
5/8"-18 x 4-1/2"
5/8"-18 x 4-1/2"
5/8"-18 x 4"
5/8"-18 x 5-1/2"
5/8"-18 x 6-1/2"
5/8"-18 x 6"
5/8"-18 x 7"
7/16"-20 x 1-1/2"
7/16"-20 x 1-3/4"
7/16"-20 x 1"
7/16"-20 x 2-1/2"
7/16"-20 x 2"
7/8"-14 x 3-1/2"
7/8"-14 x 7-1/4"
7/8"-9 x 2-1/2"
7/8"-14 x 10-1/2"
7/8"-14 x 3-1/4"
7/8"-14 x 4-1/2"
7/8"-14 x 4"
Qty.
1
4
4
4
4
4
4
4
2
1
25
25
5
10
10
10
4
1
4
4
2
1
4
4
25
25
25
10
10
2
1
10
1
1
1
2
Bolts
11-17
FASTENERS
11
Fasteners
11
FASTENERS
Part No.
HWC01786
HWC01790
HWC01792
HWC01794
HWC01798
HWC01800
HWC01804
HWC01814
HWC01936
HWC01956
HWC01966
HWC01970
HWC01992
HWC02000
HWC02002
HWC02006
HWC02022
HWC02032
HWC02046
HWC04036
HWC04088
HWC04128
HWC04134
HWC04152
HWC04190
HWC04198
HWC04210
HWC04393
HWC04641
HWC04702
HWC04732
HWC04738
HWC04903
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
HWC06028
UNC
HWC06032
HWC06044
HWC06078
UNC
UNF
UNC
11-18
Bolts
Material/Finish
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Cadmium Zinc
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Plain
Cadmium w/ Nylon Patch
Cadmium w/ Nylon Patch
Plain w/ Nylon Patch
Plain w/ Nylon Patch
Plain w/ Nylon Patch
Plain w/ Nylon Patch
Plain w/ Nylon Patch
Plain w/ Nylon Patch
Cadmium
Plain
Plain
Plain
Black Phosphate Oil w/
Nylon Patch
Zinc Yellow
Zinc
Zinc Yellow
Size
7/8"-14 x 5-1/2"
7/8"-14 x 5-3/4"
7/8"-14 x 5"
7/8"-14 x 6-3/4"
7/8"-14 x 6"
7/8"-14 x 7-1/2"
7/8"-14 x 8-1/2"
9/16"-12 x 2"
3/8"-16 x 1-3/4"
7/8"-14 x 7"
1/2"-13 x 1-3/4"
1/2"-20 x 2-1/4"
7/8"-14 x 4-1/4"
3/4"-16 x 3-3/4"
3/4"-16 x 3"
3/4"-16 x 4-1/2"
3/8"-24 x 3-1/2"
5/8"-11 x 2"
7/8"-14 x 11"
3/4"-16 x 5-1/4"
7/8"-14 x 6-1/4"
1/2"-13 x 1-1/4"
1/2"-13 x 4"
3/4"-10 x 2"
5/8"-11 x 1-1/2"
5/8"-11 x 1-3/4"
5/8"-11 x 2"
3/4"-10 x 2-1/2"
3/4"-10 x 2-1/4"
7/16"-20 x 5"
1-3/8"-12 x 5-3/4"
1-1/4"-12 x 5-1/4"
1-1/4"-12 x 7-1/2"
Qty.
2
2
4
1
2
1
1
10
10
1
10
10
2
2
4
4
10
4
1
2
2
10
4
4
4
4
4
5
10
4
1
1
1
3/4"-10 x 2-1/2"
4
5/8"-11 x 8-1/2"
3/8"-24 x 1-1/2"
1/2"-13 x 5-1/2"
2
15
5
Part No.
HWC06082
HWC06084
HWC06120
HWC06134
HWC06154
HWC06172
HWC06208
HWC06210
HWC06222
HWC06250
HWC06273
HWC06510
HWC06534
HWC06553
HWC06600
HWC06622
HWC06628
HWC06630
HWC06636
HWC06658
HWC06838
HWC07125
HWC07153
HWC07155
HWC08208
HWC09205
HWC09215
HWC09239
HWC09245
HWU00101
HWU00114
HWU00127
HWU00140
HWU00153
HWU00166
HWU00179
HWU00192
HWU00205
TRP100EN-A
Fasteners
Thread Standard
UNC
UNC
UNF
UNC
UNC
UNC
UNC
UNC
UNF
UNC
UNF
UNF
UNC
UNC
UNF
UNC
UNC
UNC
UNF
UNF
UNC
UNC
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Black
Zinc
Zinc
Plain w/ Nylon Patch
Plain
Plain
Plain w/ Nylon Patch
Zinc Yellow
Plain
Zinc Gold / Yellow
Zinc Yellow
Zinc Yellow
Plain
Zinc Yellow w/ Nylon Patch
Zinc Yellow
Zinc Yellow
Plain
Zinc Gold / Yellow
Zinc Yellow w/ Nylon Patch
Zinc Yellow w/ Nylon Patch
Plain
Plain
Plain
Zinc Yellow w/ Nylon Patch
Cadmium
Zinc Yellow w/ Nylon Patch
Zinc Yellow w/ Nylon Patch
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
1/2"-13 x 1-3/4"
1/2"-13 x 3-1/2"
3/4"-16 x 4-1/2" Pitman Arm
3/8"-16 x 1-1/2"
3/8"-16 x 1"
5/16"-18 x 2"
7/16"-14 x 1-1/2"
7/16"-14 x 5-1/2"
7/8"-14 x 2-1/4"
5/8"-11 x 4-3/4"
1"-14 x 5-1/2"
7/16"-20 x 2"
1/2"-13 x 6"
1/2"-13 x 1-1/2"
3/8"-24 x 19/32"
5/8"-11 x 2-1/2"
5/8"-11 x 3-1/4"
5/8"-11 x 4-1/4"
5/8"-18 x 5"
7/16"-20 x 1-3/4"
5/8"-11 x 2" Full Thread
7/16"-14 x 2-1/2"
7/8"-14 x 3-3/4"
7/8"-14 x 4-3/4"
7/8"-14 x 5-1/4"
7/16"-14 x 1-1/2"
3/8"-16 x 7"
7/16"-14 x 2-3/4"
7/16"-14 x 1-3/4"
1/4"-20 x 1/2"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-20 x 1-1/4"
1/4"-20 x 1-1/2"
1/4"-20 x 1-3/4"
1/4"-20 x 2"
Qty.
10
10
1
25
50
10
25
2
1
4
1
25
10
10
4
10
4
4
4
25
5
25
4
4
5
10
4
1
25
100
100
100
100
100
100
100
100
100
Bolts
11-19
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWU00218
HWU00231
HWU00244
HWU00257
HWU00270
HWU00283
HWU00296
HWU00309
HWU00322
HWU00335
HWU00361
HWU00374
HWU00400
HWU00426
HWU00439
HWU00452
HWU00465
HWU00478
HWU00491
HWU00504
HWU00517
HWU00530
HWU00543
HWU00556
HWU00569
HWU00582
HWU00595
HWU00608
HWU00621
HWU00634
HWU00647
HWU00660
HWU00673
HWU00686
HWU00699
HWU00712
11-20
11
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
1/4"-20 x 2-1/4"
1/4"-20 x 2-1/2"
1/4"-20 x 2-3/4"
1/4"-20 x 3"
1/4"-20 x 3-1/4"
1/4"-20 x 3-1/2"
1/4"-20 x 3-3/4"
1/4"-20 x 4"
1/4"-20 x 4-1/2"
1/4"-20 x 5"
1/4"-20 x 6"
5/16"-18 x 1/2"
5/16"-18 x 3/4"
5/16"-18 x 1"
5/16"-18 x 1-1/4"
5/16"-18 x 1-1/2"
5/16"-18 x 1-3/4"
5/16"-18 x 2"
5/16"-18 x 2-1/4"
5/16"-18 x 2-1/2"
5/16"-18 x 2-3/4"
5/16"-18 x 3"
5/16"-18 x 3-1/4"
5/16"-18 x 3-1/2"
5/16"-18 x 3-3/4"
5/16"-18 x 4"
5/16"-18 x 4-1/2"
5/16"-18 x 5"
5/16"-18 x 5-1/2"
5/16"-18 x 6"
3/8"-16 x 1/2"
3/8"-16 x 5/8"
3/8"-16 x 3/4"
3/8"-16 x 7/8"
3/8"-16 x 1"
3/8"-16 x 1-1/4"
Qty.
100
100
100
100
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
100
100
100
100
100
100
Part No.
HWU00725
HWU00738
HWU00751
HWU00764
HWU00777
HWU00790
HWU00803
HWU00816
HWU00829
HWU00842
HWU00855
HWU00868
HWU00881
HWU00894
HWU00907
HWU00920
HWU00946
HWU00959
HWU00972
HWU00985
HWU00998
HWU01011
HWU01024
HWU01037
HWU01050
HWU01063
HWU01076
HWU01089
HWU01102
HWU01115
HWU01128
HWU01141
HWU01154
HWU01167
HWU01180
HWU01193
TRP100EN-A
Fasteners
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Plain
Size
3/8"-16 x 1-1/2"
3/8"-16 x 1-3/4"
3/8"-16 x 2"
3/8"-16 x 2-1/4"
3/8"-16 x 2-1/2"
3/8"-16 x 2-3/4"
3/8"-16 x 3"
3/8"-16 x 3-1/4"
3/8"-16 x 3-1/2"
3/8"-16 x 3-3/4"
3/8"-16 x 4"
3/8"-16 x 4-1/2"
3/8"-16 x 5"
3/8"-16 x 5-1/2"
3/8"-16 x 6"
7/16"-14 x 3/4"
7/16"-14 x 1"
7/16"-14 x 1-1/4"
7/16"-14 x 1-1/2"
7/16"-14 x 1-3/4"
7/16"-14 x 2"
7/16"-14 x 2-1/4"
7/16"-14 x 2-1/2"
7/16"-14 x 2-3/4"
7/16"-14 x 3"
7/16"-14 x 3-1/4"
7/16"-14 x 3-1/2"
7/16"-14 x 3-3/4"
7/16"-14 x 4"
7/16"-14 x 4-1/2"
7/16"-14 x 5"
7/16"-14 x 5-1/2"
7/16"-14 x 6"
1/2"-13 x 1"
1/2"-13 x 1-1/4"
1/2"-13 x 1-1/2"
Qty.
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
100
100
50
50
50
50
50
50
50
50
10
10
10
10
10
10
10
10
50
50
50
Bolts
11-21
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWU01219
HWU01232
HWU01245
HWU01258
HWU01271
HWU01284
HWU01310
HWU01323
HWU01336
HWU01349
HWU01388
HWU01401
HWU01440
HWU01453
HWU01466
HWU01479
HWU01492
HWU01505
HWU01518
HWU01531
HWU01544
HWU01570
HWU01596
HWU01609
HWU01622
HWU01635
HWU01648
HWU01661
HWU01674
HWU01687
HWU01700
HWU01726
HWU01739
HWU01752
HWU01765
11-22
11
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
1/2"-13 x 2"
1/2"-13 x 2-1/4"
1/2"-13 x 2-1/2"
1/2"-13 x 2-3/4"
1/2"-13 x 3"
1/2"-13 x 3-1/4"
1/2"-13 x 3-3/4"
1/2"-13 x 4"
1/2"-13 x 4-1/2"
1/2"-13 x 5"
1/2"-13 x 6-1/2"
1/2"-13 x 7"
9/16"-12 x 1"
9/16"-12 x 1-1/4"
9/16"-12 x 1-1/2"
9/16"-12 x 1-3/4"
9/16"-12 x 2"
9/16"-12 x 2-1/4"
9/16"-12 x 2-1/2"
9/16"-12 x 2-3/4"
9/16"-12 x 3"
9/16"-12 x 3-1/2"
9/16"-12 x 4"
9/16"-12 x 4-1/2"
9/16"-12 x 5"
9/16"-12 x 5-1/2"
9/16"-12 x 6"
5/8"-11 x 1"
5/8"-11 x 1-1/4"
5/8"-11 x 1-1/2"
5/8"-11 x 1-3/4"
5/8"-11 x 2-1/4"
5/8"-11 x 2-1/2"
5/8"-11 x 2-3/4"
5/8"-11 x 3"
Qty.
50
50
50
50
50
10
10
10
10
10
10
10
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
25
25
25
25
10
10
10
10
Part No.
HWU01778
HWU01791
HWU01804
HWU01817
HWU01830
HWU01843
HWU01856
HWU01869
HWU01882
HWU01895
HWU01908
HWU01934
HWU01947
HWU01960
HWU01973
HWU01986
HWU01999
HWU02012
HWU02025
HWU02038
HWU02051
HWU02064
HWU02077
HWU02090
HWU02103
HWU02116
HWU02129
HWU02142
HWU02155
HWU02168
HWU02194
HWU02220
HWU02246
HWU02272
HWU02285
HWU02298
TRP100EN-A
Fasteners
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
5/8"-11 x 3-1/4"
5/8"-11 x 3-1/2"
5/8"-11 x 3-3/4"
5/8"-11 x 4"
5/8"-11 x 4-1/2"
5/8"-11 x 5"
5/8"-11 x 5-1/2"
5/8"-11 x 6"
5/8"-11 x 7"
5/8"-11 x 7-1/2"
5/8"-11 x 8"
5/8"-11 x 9"
3/4"-10 x 1-1/4"
3/4"-10 x 1-1/2"
3/4"-10 x 1-3/4"
3/4"-10 x 2"
3/4"-10 x 2-1/4"
3/4"-10 x 2-1/2"
3/4"-10 x 2-3/4"
3/4"-10 x 3"
3/4"-10 x 3-1/4"
3/4"-10 x 3-1/2"
3/4"-10 x 3-3/4"
3/4"-10 x 4"
3/4"-10 x 4-1/2"
3/4"-10 x 5"
3/4"-10 x 5-1/2"
3/4"-10 x 6"
3/4"-10 x 7"
7/8"-9 x 2"
7/8"-9 x 2-1/2"
7/8"-9 x 3"
7/8"-9 x 3-1/2"
7/8"-9 x 4"
7/8"-9 x 4-1/2"
7/8"-9 x 5"
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
Bolts
11-23
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWU02311
HWU02324
HWU02337
HWU02363
HWU02389
HWU02415
HWU02428
HWU02441
HWU02454
HWU02467
HWU02493
HWU02506
HWU02532
HWU02558
HWU02571
HWU02584
HWU02597
HWU02610
HWU02636
HWU02649
HWU02662
HWU02688
HWU02714
HWU02727
HWU02740
HWU02766
HWU02779
HWU02805
HWU02831
HWU02844
HWU02857
HWU02870
HWU02883
HWU02896
HWU02909
HWU02922
11-24
11
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
7/8"-9 x 5-1/2"
7/8"-9 x 6"
1"-8 x 2"
1"-8 x 2-1/2"
1"-8 x 3"
1"-8 x 3-1/2"
1"-8 x 3-3/4"
1"-8 x 4"
1"-8 x 4-1/2"
1"-8 x 5"
1"-8 x 6"
1/4"-28 x 1/2"
1/4"-28 x 3/4"
1/4"-28 x 1"
1/4"-28 x 1-1/4"
1/4"-28 x 1-1/2"
1/4"-28 x 1-3/4"
1/4"-28 x 2"
1/4"-28 x 2-1/2"
1/4"-28 x 2-3/4"
1/4"-28 x 3"
1/4"-28 x 3-1/2"
1/4"-28 x 4"
1/4"-28 x 4-1/2"
1/4"-28 x 5"
1/4"-28 x 6"
5/16"-24 x 1/2"
5/16"-24 x 3/4"
5/16"-24 x 1"
5/16"-24 x 1-1/4"
5/16"-24 x 1-1/2"
5/16"-24 x 1-3/4"
5/16"-24 x 2"
5/16"-24 x 2-1/4"
5/16"-24 x 2-1/2"
5/16"-24 x 2-3/4"
Qty.
15
15
10
10
10
10
10
10
10
10
10
100
100
100
100
100
100
100
100
100
100
50
25
50
50
50
100
100
100
100
100
100
100
100
100
100
Part No.
HWU02935
HWU02961
HWU02974
HWU02987
HWU03000
HWU03013
HWU03026
HWU03039
HWU03052
HWU03078
HWU03104
HWU03117
HWU03130
HWU03143
HWU03156
HWU03169
HWU03182
HWU03195
HWU03208
HWU03221
HWU03234
HWU03260
HWU03273
HWU03286
HWU03312
HWU03351
HWU03364
HWU03377
HWU03403
HWU03429
HWU03442
HWU03481
HWU03507
HWU03520
HWU03533
HWU03546
TRP100EN-A
Fasteners
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
5/16"-24 x 3"
5/16"-24 x 3-1/2"
5/16"-24 x 3-3/4"
5/16"-24 x 4"
5/16"-24 x 4-1/2"
5/16"-24 x 5"
5/16"-24 x 5-1/2"
5/16"-24 x 6"
3/8"-24 x 1/2"
3/8"-24 x 3/4"
3/8"-24 x 1"
3/8"-24 x 1-1/4"
3/8"-24 x 1-1/2"
3/8"-24 x 1-3/4"
3/8"-24 x 2"
3/8"-24 x 2-1/4"
3/8"-24 x 2-1/2"
3/8"-24 x 2-3/4"
3/8"-24 x 3"
3/8"-24 x 3-1/4"
3/8"-24 x 3-1/2"
3/8"-24 x 4"
3/8"-24 x 4-1/2"
3/8"-24 x 5"
3/8"-24 x 6"
7/16"-20 x 1"
7/16"-20 x 1-1/4"
7/16"-20 x 1-1/2"
7/16"-20 x 2"
7/16"-20 x 2-1/2"
7/16"-20 x 2-3/4"
7/16"-20 x 3-1/2"
7/16"-20 x 4"
7/16"-20 x 4-1/2"
7/16"-20 x 5"
7/16"-20 x 5-1/2"
Qty.
100
50
50
50
50
50
10
50
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
25
50
100
50
50
50
50
50
25
10
10
10
10
Bolts
11-25
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWU03559
HWU03572
HWU03598
HWU03611
HWU03624
HWU03637
HWU03650
HWU03663
HWU03676
HWU03689
HWU03702
HWU03715
HWU03728
HWU03741
HWU03767
HWU03780
HWU03793
HWU03806
HWU03819
HWU03832
HWU03845
HWU03858
HWU03871
HWU03884
HWU03897
HWU03910
HWU03923
HWU03949
HWU03975
HWU04001
HWU04014
HWU04040
HWU04066
HWU04079
HWU04092
HWU04105
11-26
11
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
7/16"-20 x 6"
1/2"-20 x 3/4"
1/2"-20 x 1"
1/2"-20 x 1-1/4"
1/2"-20 x 1-1/2"
1/2"-20 x 1-3/4"
1/2"-20 x 2"
1/2"-20 x 2-1/4"
1/2"-20 x 2-1/2"
1/2"-20 x 2-3/4"
1/2"-20 x 3"
1/2"-20 x 3-1/4"
1/2"-20 x 3-1/2"
1/2"-20 x 3-3/4"
1/2"-20 x 4-1/2"
1/2"-20 x 5"
1/2"-20 x 5-1/2"
1/2"-20 x 6"
1/2"-20 x 6-1/2"
1/2"-20 x 7"
9/16"-18 x 1"
9/16"-18 x 1-1/4"
9/16"-18 x 1-1/2"
9/16"-18 x 1-3/4"
9/16"-18 x 2"
9/16"-18 x 2-1/4"
9/16"-18 x 2-1/2"
9/16"-18 x 3"
9/16"-18 x 3-1/2"
9/16"-18 x 4"
9/16"-18 x 4-1/2"
9/16"-18 x 5-1/2"
5/8"-18 x 1"
5/8"-18 x 1-1/4"
5/8"-18 x 1-1/2"
5/8"-18 x 1-3/4"
Qty.
10
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
2
25
25
25
25
25
25
25
Part No.
HWU04118
HWU04131
HWU04144
HWU04157
HWU04170
HWU04196
HWU04209
HWU04222
HWU04235
HWU04248
HWU04261
HWU04274
HWU04287
HWU04300
HWU04313
HWU04326
HWU04339
HWU04352
HWU04365
HWU04378
HWU04391
HWU04404
HWU04417
HWU04430
HWU04443
HWU04456
HWU04469
HWU04482
HWU04495
HWU04508
HWU04521
HWU04534
HWU04586
HWU04599
HWU04612
HWU04625
TRP100EN-A
Fasteners
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Size
5/8"-18 x 2"
5/8"-18 x 2-1/4"
5/8"-18 x 2-1/2"
5/8"-18 x 2-3/4"
5/8"-18 x 3"
5/8"-18 x 3-1/2"
5/8"-18 x 3-3/4"
5/8"-18 x 4"
5/8"-18 x 4-1/2"
5/8"-18 x 5"
5/8"-18 x 5-1/2"
5/8"-18 x 6"
5/8"-18 x 6-1/2"
5/8"-18 x 7"
5/8"-18 x 7-1/2"
5/8"-18 x 8”
5/8"-18 x 8-1/2"
5/8"-18 x 9”
5/8"-18 x 9-1/2"
5/8"-18 x 10”
5/8"-18 x 10-1/2"
5/8"-18 x 11"
3/4"-16 x 1-1/4"
3/4"-16 x 1-1/2"
3/4"-16 x 1-3/4"
3/4"-16 x 2"
3/4"-16 x 2-1/4"
3/4"-16 x 2-1/2"
3/4"-16 x 2-3/4"
3/4"-16 x 3"
3/4"-16 x 3-1/4"
3/4"-16 x 3-1/2"
3/4"-16 x 5"
3/4"-16 x 5-1/2"
3/4"-16 x 6"
7/8"-14 x 2"
Qty.
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
10
10
10
10
10
10
10
10
10
10
10
10
10
15
Bolts
11-27
FASTENERS
11
Fasteners
FASTENERS
Part No.
HWU04651
HWU04677
HWU04690
HWU04729
HWU04742
HWU04755
HWU04768
HWU04781
HWU04794
HWU04807
HWU04820
HWU05449
HWU07043
HWU07082
HWU07121
HWC06122
HWC06526
HWC06528
HWC06644
HWC06913
HWC07701
HWC08206
HWC08210
HWC08212
HWU01206
HWU01297
HWU01362
HWU01375
HWU08031
HWU08057
HWU08161
11-28
11
Thread Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Bolts
Material/Finish
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Plain
Plain
Plain
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
n/a
Plain
Plain
Plain
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Clear
Zinc Clear
Zinc Clear
Size
7/8"-14 x 2-1/2"
7/8"-14 x 3"
7/8"-14 x 3-1/4"
7/8"-14 x 4"
7/8"-14 x 4-1/2"
7/8"-14 x 5"
7/8"-14 x 5-1/2"
7/8"-14 x 6"
7/8"-14 x 6-1/2"
7/8"-14 x 7"
7/8"-14 x 7-1/2"
3/4"-16 x 6-1/2"
3/4"-16 x 10”
3/4"-16 x 8”
5/8"-18 x 6-1/2"
3/4"-10NC x 2"
1/2"-13NC x 2-1/2"
1/2"-13NC x 2"
5/8"-11NC x 3"
3/4"-10NC x 2-1/4"
5/8"-18NF x 3-1/4"
7/8"-14NF x 4-1/4"
7/8"-14NF x 6-3/4"
7/8"-14NF x 7-1/4"
1/2"-13NC x 1-3/4"
1/2"-13NC x 3-1/2"
1/2"-13NC x 5-1/2"
1/2"-13NC x 6"
1/4"-20NC x 1-1/4"
1/4"-20NC x 1-3/4"
5/16"-18NC x 1-3/4"
Qty.
15
15
15
15
15
15
15
15
15
2
10
20
10
10
10
10
25
15
10
10
10
5
5
5
50
10
10
10
100
100
100
11
Fasteners
Grade 10.9 Bolts (MetriC)
Table 11-9: Fasteners - Bolts - Grade 10.9 (Metric)
Thread Standard
ISO
Material/Finish
Nylon Patch
Size
M10-150 x 20, Locking
Qty.
25
FASTENERS
Part No.
HWC06863
TRP100EN-A
Bolts
11-29
Fasteners
11
Grade 10.9 hex Bolts (MetriC)
HWC01079
HWC04116
Table 11-10: Fasteners - Hex Bolts - Grade 10.9 (Metric)
FASTENERS
Part No.
HWC00178
HWC00186
HWC01031
HWC01067
HWC01069
HWC01073
HWC01075
HWC01077
HWC01079
HWC01081
HWC01085
HWC01091
HWC01093
HWC01095
HWC01101
HWC01153
HWC01155
HWC01157
HWC01163
HWC01167
HWC01171
HWC01193
HWC01195
HWC01199
HWC01311
HWC01313
HWC01872
HWC01874
11-30
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Bolts
Material/Finish
Magnesium
Magnesium
Cadmium
Plain
Cadmium
Plain
Plain
Plain
Plain
Cadmium
Cadmium
Cadmium
Cadmium
Cadmium
Cadmium w/ Nylon Patch
Cadmium
Cadmium
Plain
Cadmium
Cadmium
Cadmium w/ Nylon Patch
Cadmium
Cadmium
Chrome
Cadmium
Cadmium
Cadmium
Zinc Olive Drab
Size
M20-2.50 x 150mm
M16-2.00 x 70mm
M12-1.75 x 50mm
M16-2.00 x 45mm
M16-2.00 x 50mm
M16-2.00 x 60mm
M16-2.00 x 90mm
M20-2.50 x 110mm
M20-2.50 x 120mm
M20-2.50 x 90mm
M12-1.75 x 30mm
M8-1.25 x 20mm
M8-1.25 x 25mm
M8-1.25 x 40mm
M10-1.50 x 30mm
M16-2.00 x 40mm
M16-2.00 x 70mm
M20-2.50 x 140mm
M6-1.00 x 60mm
M10-1.50 x 70mm
M12-1.75 x 60mm
M20-2.50 x 110mm
M16-2.00 x 80mm
M12-1.75 x 60mm
M6-1.00 x 40mm
M6-1.00 x 20mm
M10-1.50 x 130mm
M12-1.75 x 170mm
Qty.
5
1
5
4
4
4
2
1
2
2
10
10
25
25
10
4
2
1
25
10
10
1
4
2
25
50
1
2
Part No.
HWC04004
HWC04026
HWC04046
HWC04104
HWC04110
HWC04114
HWC04116
HWC04118
HWC04149
HWC04205
HWC04224
HWC04226
HWC04228
HWC04232
HWC04238
HWC04240
HWC04242
HWC04254
HWC04256
HWC04258
HWC04269
HWC04275
HWC04284
HWC04290
HWC04292
HWC04308
HWC04310
HWC04312
HWC04316
HWC04321
HWC04349
HWC04384
HWC04386
HWC04389
HWC04402
HWC04406
HWC04410
HWC04418
TRP100EN-A
Fasteners
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Size
Cadmium w/ Nylon Patch
M12-1.75 x 30mm
Cadmium w/ Nylon Patch
M8-1.25 x 20mm
Plain
M12-1.75 x 60mm
Zinc Black
M8-1.25 x 30mm
Cadmium
M10-1.50 x 90mm
Cadmium
M16-2.00 x 160mm
Cadmium
M16-2.00 x 260mm
Cadmium
M20-2.50 x 130mm
Cadmium
M10-1.50 x 100mm
Cadmium
M8-1.25 x 35mm
Plain
M12-1.75 x 80mm
Plain
M12-1.75 x 90mm
Cadmium w/ Nylon Patch
M12-1.75 x 50mm
Cadmium w/ Nylon Patch
M6-1.00 x 25mm
Cadmium w/ Nylon Patch
M8-1.25 x 30mm
Cadmium w/ Nylon Patch
M10-1.50 x 90mm
Cadmium
M10-1.50 x 110mm
Cadmium
M10-1.50 x 20mm
Cadmium w/ Nylon Patch
M10-1.50 x 70mm
Cadmium
M10-1.50 x 50mm
Cadmium
M10-1.50 x 40mm
Steel Zinc w/ Nylon Patch
M8-1.25 x 95mm
Cadmium
M12-1.75 x 100mm
Cadmium
M12-1.75 x 110mm
Plain
M12-1.75 x 110mm
Cadmium
M12-1.75 x 180mm
Plain
M12-1.75 x 180mm
Plain
M12-1.75 x 200mm
Chrome
M12-1.75 x 210mm
Zinc Black
M8-1.25 x 40mm
Cadmium
M10-1.50 x 275mm, ASME
Plain
M16-2.00 x 150mm
Cadmium
M16-2.00 x 130mm
Cadmium
M10-1.50 x 25mm
Plain
M16-2.00 x 240mm
Plain
M16-2.00 x 280mm
Plain
M16-2.00 x 40mm
Plain
M16-2.00 x 80mm
Bolts
Qty.
25
50
5
25
4
2
1
1
10
50
10
2
10
50
15
4
5
4
4
2
4
10
2
4
5
1
2
1
1
4
2
4
2
25
1
1
15
4
11-31
FASTENERS
11
Fasteners
11
FASTENERS
Part No.
HWC04420
HWC04424
HWC04426
HWC04428
HWC04430
HWC04432
HWC04434
HWC04444
HWC04448
HWC04452
HWC04456
HWC04458
HWC04462
HWC04506
HWC04512
HWC04514
HWC04523
HWC04527
HWC04532
HWC04572
HWC04584
HWC04590
HWC04592
HWC04596
HWC04705
HWC04706
HWC04710
HWC04712
HWC04718
HWC04722
HWC04758
HWC04859
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
HWC06052
ISO
HWC06264
HWC06268
HWC06270
ISO
ISO
ISO
11-32
Bolts
Material/Finish
Size
Cadmium
M16-2.00 x 90mm
Plain
M16-2.00 x 220mm
Cadmium
M20-2.50 x 100mm
Cadmium
M20-2.50 x 120mm
Plain
M20-2.50 x 130mm
Plain
M20-2.50 x 60mm
Cadmium
M20-2.50 x 70mm
Plain
M20-2.50 x 80mm
Plain
M20-2.50 x 90mm
Cadmium
M6-1.00 x 50mm
Cadmium w/ Nylon Patch
M6-1.00 x 30mm
Cadmium w/ Nylon Patch
M6-1.00 x 40mm
Cadmium w/ Nylon Patch
M6-1.00 x 15mm
Cadmium
M8-1.25 x 50mm
Cadmium
M8-1.25 x 90mm
Cadmium
M8-1.25 x 100mm
Cadmium
M10-1.50 x 20mm
Cadmium w/ Nylon Patch
M8-1.25 x 25mm
Cadmium
M10-1.50 x 150mm
Plain
M12-1.75 x 30mm
Cadmium
M20-2.50 x 140mm
Cadmium
M16-2.00 x 290mm
Cadmium w/ Nylon Patch
M6-1.00 x 50mm
Zinc Black
M6-1.00 x 20mm
Cadmium
M10-1.50 x 60mm, ASME
Plain
M16-2.00 x 170mm
Plain
M16-2.00 x 200mm
Cadmium
M8-1.25 x 60mm
Plain
M16-2.00 x 130mm
Plain
M16-2.00 x 160mm
Plain
M16-2.00 x 210mm
Zinc Black
M8-1.25 x 50mm
M10-1.50 x 90mm, Full
Zinc Olive Drab
Thread
Zinc Olive Drab
M10-1.50 x 20mm
Zinc Olive Drab
M10-1.50 x 135mm
Zinc Olive Drab
M10-1.50 x 45mm
Qty.
4
1
2
1
2
4
2
1
1
50
10
10
10
15
2
10
10
50
1
25
1
1
4
4
25
4
1
10
4
2
4
2
2
25
1
25
Part No.
HWC06274
HWC06280
HWC06284
HWC06286
HWC06288
HWC06296
HWC06300
HWC06314
HWC06320
HWC06322
HWC06326
HWC06338
HWC06340
HWC06346
HWC06372
HWC06382
HWC06408
HWC06461
HWC06507
HWC06513
HWC06527
HWC06571
HWC06668
HWC06674
HWC06676
HWC06678
HWC06689
HWC06827
HWC06871
HWC06905
HWC06919
HWC06963
HWC07037
HWC07039
HWC07043
HWC07183
TRP100EN-A
Fasteners
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Plain
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc Olive Drab
Zinc
Cadmium
Cadmium w/Nylon Patch
Size
M10-1.50 x 30mm
M10-1.50 x 35mm
M10-1.50 x 90mm
M12-1.75 x 230mm
M12-1.75 x 45mm
M12-1.75 x 160mm
M12-1.75 x 140mm
M12-1.75 x 180mm
M12-1.75 x 70mm
M12-1.75 x 80mm
M12-1.75 x 120mm
M16-2.00 x 260mm
M16-2.00 x 280mm
M16-2.00 x 50mm
M16-2.00 x 240mm
M16-2.00 x 90mm
M10-1.50 x 25mm
M12-1.75 x 200mm
M16-2.00 x 205mm
M16-2.00 x 230mm
M8-1.25 x 35mm
M8-1.25 x 45mm
M10-1.50 x 40mm
M12-1.75 x 220mm
M16-2.00 x 60mm
M8-1.25 x 30mm
M12-1.75 x 240mm
M8-1.25 x 90mm
M10-1.50 x 16mm
M8-1.25 x 100mm
M6-1.00 x 20mm
M12-1.75 x 35mm
M10-1.50 x 110mm
M16-2.00 x 190mm
M8-1.25 x 110mm
M10-1.50 x 35mm
Qty.
50
15
2
1
15
1
1
1
2
10
2
1
1
4
1
1
5
1
1
1
25
10
15
1
4
50
1
1
1
4
10
5
10
5
5
25
Bolts
11-33
FASTENERS
11
Fasteners
11
Part No.
Thread Standard
FASTENERS
HWC07205
ISO
HWC07247
HWC08045
HWC09180
HWC09208
HWC09238
HWC10050
HWC12390
HWC12452
HWC12513
HWC12538
HWU10103
HWU10129
HWU10142
HWU10155
HWU10168
HWU10181
HWU10194
HWU10207
HWU10220
HWU10233
HWU10246
HWU10272
HWU10298
HWU10311
HWU10324
HWU10337
HWU10350
HWU10363
HWU10376
HWU10389
HWU10428
HWU10454
HWU10480
HWU10506
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
11-34
Bolts
Material/Finish
Zinc Olive Drab w/ Nylon
Patch
Cadmium w/ Nylon Patch
Plain
Zinc Olive Drab
Cadmium
Plain
Cadmium
Cadmium
Cadmium
Zinc Olive Drab
Cadmium w/ Nylon Patch
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Size
Qty.
M10-1.50 x 25mm
10
M8-1.25 x 100mm
M16-2.00 x 300mm
M20-2.50 x 180mm
M8-1.25 x 70mm
M12-1.75 x 170mm
M10-1.50 x 30mm
M6-1.00 x 16mm
M8-1.25 x 30mm
M12-1.75 x 100mm
M6-1.00 x 20mm
M6-1.00 x 16mm
M6-1.00 x 20mm
M6-1.00 x 25mm
M6-1.00 x 30mm
M6-1.00 x 35mm
M6-1.00 x 40mm
M6-1.00 x 45mm
M6-1.00 x 50mm
M6-1.00 x 60mm
M6-1.00 x 70mm
M6-1.00 x 80mm
M8-1.25 x 20mm
M8-1.25 x 30mm
M8-1.25 x 35mm
M8-1.25 x 40mm
M8-1.25 x 45mm
M8-1.25 x 50mm
M8-1.25 x 60mm
M8-1.25 x 70mm
M10-1.50 x 16mm
M10-1.50 x 30mm
M10-1.50 x 40mm
M10-1.50 x 50mm
M10-1.50 x 60mm
5
2
1
10
1
15
50
20
4
50
50
50
25
25
25
25
25
25
25
25
25
50
25
25
25
25
25
25
25
50
50
25
25
25
Part No.
HWU10519
HWU10545
HWU10558
HWU10571
HWU10584
HWU10597
HWU10610
HWU10623
HWU10649
HWU10662
HWU10675
HWU10688
HWU10714
HWU10727
HWU10740
HWU10753
HWU10766
HWU10779
HWU10792
HWU10805
HWU10818
HWU10831
HWU10844
HWU10857
HWU10870
HWU10883
HWU10909
HWU10922
HWU10935
HWU10948
HWU10961
HWU10974
HWU10987
HWU11000
HWU11013
HWU11026
TRP100EN-A
Fasteners
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Size
M10-1.50 x 65mm
M10-1.50 x 75mm
M10-1.50 x 80mm
M10-1.50 x 90mm
M10-1.50 x 100mm
M12-1.75 x 20mm
M12-1.75 x 25mm
M12-1.75 x 30mm
M12-1.75 x 40mm
M12-1.75 x 45mm
M12-1.75 x 50mm
M12-1.75 x 55mm
M12-1.75 x 65mm
M12-1.75 x 70mm
M12-1.75 x 80mm
M12-1.75 x 90mm
M12-1.75 x 100mm
M12-1.75 x 110mm
M12-1.75 x 120mm
M16-2.00 x 30mm
M16-2.00 x 40mm
M16-2.00 x 50mm
M16-2.00 x 60mm
M16-2.00 x 70mm
M16-2.00 x 80mm
M16-2.00 x 90mm
M16-2.00 x 120mm
M16-2.00 x 130mm
M16-2.00 x 140mm
M16-2.00 x 150mm
M20-2.50 x 40mm
M20-2.50 x 50mm
M20-2.50 x 60mm
M20-2.50 x 70mm
M20-2.50 x 80mm
M20-2.50 x 90mm
Qty.
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
2
10
10
10
10
10
5
Bolts
11-35
FASTENERS
11
Fasteners
11
FASTENERS
Part No.
HWU11039
HWU11052
HWU11065
HWU11078
HWU11091
HWU11104
HWU11117
HWU20116
HWU20259
HWU20285
HWU20402
HWU20415
HWU20441
HWU20467
HWU20532
HWU20636
HWC04236
HWC04320
HWC04324
HWC04326
HWC04328
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Material/Finish
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc Black
Phosphate
Phosphate
Phosphate
Cadmium w/ Nylon Patch
Size
M20-2.50 x 100mm
M20-2.50 x 110mm
M20-2.50 x 120mm
M20-2.50 x 130mm
M20-2.50 x 140mm
M20-2.50 x 150mm
M20-2.50 x 200mm
M6-1.00 x 18mm
M8-1.25 x 16mm
M8-1.25 x 25mm
M10-1.50 x 20mm
M10-1.50 x 25mm
M10-1.50 x 35mm
M10-1.50 x 45mm
M10-1.50 x 70mm
M12-1.75 x 35mm
M8-1.25 x 30mm
M12-1.75 x 70mm
M12-1.75 x 80mm
M12-1.75 x 90mm
M12-1.75 x 50mm
Qty.
5
5
5
5
5
5
5
50
50
50
50
50
50
25
25
25
10
15
10
2
10
Size
M20-2.50 x 140mm
M16-2.00 x 60mm
M16-2.00 x 45mm
M16-2.00 x 110mm
M16-2.00 x 100mm
M16-2.00 x 120mm
Qty.
2
1
5
4
5
2
Grade 10.9 tension Control hex Bolts (MetriC)
Table 11-11: Fasteners - Hex Bolts - Grade 10.9 - Tension Control (Metric)
Part No.
HWC00196
HWC00222
HWC00224
HWC07147
HWC09280
HWC09282
11-36
Thread Standard
ISO
ISO
ISO
ISO
ISO
ISO
Bolts
Material/Finish
Magnesium
Magnesium
Magnesium
Magnesium
Magnesium
Magnesium
11
Fasteners
tension Control hex Bolts
Table 11-12: Fasteners - Hex Bolts - Tension Control
Part No.
HWC04560
HWC04562
HWC04625
Thread Standard
ISO
ISO
ISO
Unit of
Measurement
Metric
Metric
Metric
Material/Finish
Size
Qty.
Magnesium
Magnesium
Magnesium
M20-2.50 x 80mm
M20-2.50 x 90mm
M20-2.50 x 130mm
1
1
1
speCialty BOLTS
HWC01878
HWC01882
HWC01888
HWC04628
Thread
Standard
UNF
UNC
n/a
ISO
HWC04658
UNC
HWC04736
UNF
HWC04879
UNF
HWC18367
n/a
Part No.
TRP100EN-A
Unit of
Size
Qty.
Measurement Material/Finish
U.S.
Plain
1/2"-20NF x 12", Center Spring
4
U.S.
Zinc
1/4"-20NC x 3/4", Step
25
U.S.
n/a
1/4" x 1/2", T Head
10
Metric
Stainless Steel M12-1.75 x 100mm C10, Shoulder Bolt
1
5/16"-18NC x 51mm, Throttle Stop
5
U.S.
Zinc
Special Bolt
7/16"-20NF x 1", Heat-Treated Special
4
U.S.
n/a
Bolt
U.S.
Zinc
3/8"-24NF x 11" Battery Hold Down
4
Zinc Yellow w/
Temperature Bolt
1
n/a
Nylon Patch
Bolts & Clips
11-37
FASTENERS
Table 11-13: Fasteners - Hex Bolts - Specialty
Fasteners
11
BuMper Fastener Kit
Table 11-14: Fasteners - Bumper Kit
Measurement
Bumper Fastener Kit, Polished
Bumper Fastener Kit, Zinc
11-38
Bolts
FASTENERS
Part No.
HWC07063
HWC07065
Unit of Measure
Metric
Metric
Qty.
50
10
11
Fasteners
CLIPS
CaBle Clips
Part No.
HWC00200
HWC01920
HWC07139
HWC01920
Description
8.06-8.32, U-Joint Retaining Ring
Cable Clip with Adhesive Back
1/4" Cable Clip, with Adhesive Back
Standard Pack Qty.
25
2
15
Clevis (standard)
Table 11-16: Fasteners - Clevis & Cotter Pins (U.S.) - Standard
Part No.
Description
HWC02652 3/16" x 37/64", Plain
HWC06712 3/16" x 1.650", Stainless Steel
Standard Pack Qty.
15
4
CaBle e-Clip
Table 11-17: Fasteners - Clips - E-Clip (U.S.)
Part No.
HWC06728
TRP100EN-A
Description
#13 x 1/4"-3/8" Shaft Diameter E-Clip
Standard Pack Qty.
100
Clips
11-39
FASTENERS
Table 11-15: Fasteners - Clips - Cable Clip
Fasteners
11
CaBle nut Clips
Table 11-18: Fasteners - Clips - Clip-On Nut
Part No.
HWC00110
Description
0.05" Thread Pitch #8 Clip-On Nut
Standard Pack Qty.
25
Foldover u-nut Clip
Table 11-19: Fasteners - Clips - Foldover U-Nut (Metric)
Part No.
HWC06695
Description
Standard Pack Qty.
10
Description
Standard Pack Qty.
2
10
10
M5-0.08 Foldover U-Nut
MisC. Clips
FASTENERS
Table 11-20: Fasteners - Clips - Misc.
Part No.
HWC06726
HWC09373
HWC09375
1/4" x 1-3/4" x 3.88" Clip
Clip - Tinnerman
Clip
pop rod Clip
Table 11-21: Fasteners - Clips - Pop Rod Clip
Part No.
HWC02086
11-40
Description
Clip-Prop Rod SMC Hood
Clips
Material/ Finish
Plastic Coated/Black
11
Fasteners
puMp handle Clip
Table 11-22: Fasteners - Clips - Pump Handle
Part No.
HWC07071
Description
Standard Pack Qty.
5
Description
Standard Pack Qty.
20
Description
0.050"-0.080" Thick Panel Speed S Clip
Standard Pack Qty.
4
M5 Clip, Pump Handle
retaininG rinG Clip
Table 11-23: Fasteners - Clips - Retaining Ring
Part No.
HWC07177
7/16" Retaining Ring
Table 11-24: Fasteners - Clips - S-Clip (U.S.)
Part No.
HWC06730
snap Fastener
Table 11-25: Fasteners - Clips - Snap Fastener
Part No.
HWC06764
TRP100EN-A
Description
Snap Fastener, Stainless Steel
Standard Pack Qty.
5
Clips
11-41
FASTENERS
s-Clip
Fasteners
11
speed Grip nut Clip
Table 11-26: Fasteners - Clips - Speed Grip Nut
Part No.
HWC07102
Description
#10-24NC x 0.02"-0.016" Thick Retainer Speed Grip Nut
Standard Pack Qty.
10
speed nut Clip
Table 11-27: Fasteners - Clips - Speed Nut
Part No.
HWC07736
Description
1/4"-20 Speed Nut
Standard Pack Qty.
10
sprinG Clip
FASTENERS
Table 11-28: Fasteners - Clips - Spring Clip
Part No.
HWC06738
Description
Spring Clip, Locking Cylinder Case, Door Latch
Standard Pack Qty.
10
tree Clips
Table 11-29: Fasteners - Clips - Tree Clip (U.S.)
Part No.
HWC06762
HWC07166
HWC09371
11-42
Description
0.03"-0.47" Double Xmas Tree Clip Panel
1-1/4" x 5/16" x 1-1/8" Thick Clip, Panel Retainer, Pine Tree
Tinnerman Trim Clip without Flange, Black
Clips
Standard Pack Qty.
3
25
10
11
Fasteners
u-Clip nuts (MetriC)
Table 11-30: Fasteners - Clips - U-Clip Nut (Metric)
Part No.
HWC06145
HWC06547
HWC06993
Description
M5 Nut U-Clip
M4.2-1.40 x 0.64-3.8mm Speed U Nut
M8-1.25 x 4.0-7.0mm Long Speed U Nut
Standard Pack Qty.
10
10
10
u-Clip nuts (u.s.)
Part No.
HWC06968
HWC07038
HWC07094
HWC07104
HWC07740
Description
#10-32NF x 0.02"-0.12" Thick Floating U-Clip Nut, Phosphate Oil
#10-32NF x 0.02"-0.12" Thick Floating U-Clip Nut
#10-24NC x 0.05"-0.08" Thick Speed U Nut
1/4"-20 x 0.09"-0.21" Thick Speed U Nut
#10-24NC x 0.10"-0.12" Thick Speed U Nut
Standard Pack Qty.
4
10
10
15
10
u-type retaininG nut
Table 11-32: Fasteners - Clips - U-Type Retaining Nut
Part No.
HWC02588
TRP100EN-A
Description
1/4"-20NC U-Type Retaining Nut
Standard Pack Qty.
25
Clips
11-43
FASTENERS
Table 11-31: Fasteners - Clips - U-Clip Nut (U.S.)
Fasteners
11
COLLARS
Collars
Table 11-33: Fasteners - Collars
Part No.
HWC02102
HWC00917
HWC04785
Description
1" Clutch Lever Collar
19mm x 38mm, Zinc Clamping Collar
25.65mm x 44.5mm, Clamping Collar
FASTENERS
11-44
Collars
Standard Pack Qty.
4
1
4
11
Fasteners
COTTER
Cotter
Table 11-34: Fasteners - Clevis & Cotter Pins (U.S.)
Part No.
HWC07227
Description
5/32" Diameter x 3/4" Length Zinc Cotter Pin
Standard Pack Qty.
50
Cotter (extended pronG)
Part No.
HWC02630
HWU10104
HWU10117
HWU10130
HWU10156
HWU10195
HWU10208
HWU10221
HWU10247
HWU10260
HWU10312
HWU10325
HWU10338
HWU10351
HWU10364
HWU10377
HWU10390
HWU10416
HWU10429
HWU10442
HWU10455
HWU10468
HWU10481
TRP100EN-A
Description
1/8" x 2-1/4", Zinc
1/16" x 1/2", Zinc
1/16" x 3/4", Zinc
1/16" x 1", Zinc
1/16" x 2", Zinc
3/32" x 1", Zinc
3/32" x 1-1/4", Zinc
3/32" x 1-1/2", Zinc
3/32" x 2", Zinc
7/64" x 1", Zinc
7/64" x 2", Zinc
1/8" x 1/2", Zinc
1/8" x 1", Zinc
1/8" x 1-1/2", Zinc
1/8" x 2", Zinc
1/8" x 2-1/2", Zinc
1/8" x 3", Zinc
5/32" x 1", Zinc
5/32" x 1-1/2", Zinc
5/32" x 2", Zinc
5/32" x 2-1/2", Zinc
5/32" x 3", Zinc
3/16" x 1, Zinc
Standard Pack Qty.
20
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
Cotter
11-45
FASTENERS
Table 11-35: Fasteners - Clevis & Cotter Pins (U.S.) - Extended Prong
Fasteners
Part No.
HWU10494
HWU10507
HWU10520
HWU10533
HWU10572
HWU10585
HWU10598
HWU10611
HWU10624
HWU10650
HWU10676
HWU10741
11
Description
3/16" x 1-1/2", Zinc
3/16" x 2", Zinc
3/16" x 2-1/2", Zinc
3/16" x 3", Zinc
1/4" x 1, Zinc
1/4" x 1-1/2", Zinc
1/4" x 2", Zinc
1/4" x 2-1/2", Zinc
1/4" x 3", Zinc
1/4" x 4", Zinc
5/16" x 2", Zinc
3/8" x 2", Zinc
Standard Pack Qty.
50
50
50
50
50
50
50
50
50
50
50
25
Cotter (extended pronG, square Cut)
FASTENERS
Table 11-36: Fasteners - Clevis & Cotter Pins (U.S.) - Extended Prong, Square Cut
Part No.
HWC01177
HWC02620
HWC02632
HWC02640
HWC05026
HWC07130
Description
1/8" x 1", Zinc
1/4" x 3", Zinc
3/16" x 3-1/2", Zinc
7/32 x 3", Zinc
5/32" x 3/4", Zinc
1/8" x 2", Zinc
Standard Pack Qty.
1
25
25
4
100
25
Cotter (haMMerloCK)
Table 11-37: Fasteners - Clevis & Cotter Pins (U.S.) - Hammerlock
Part No.
HWU11468
HWU11624
11-46
Description
5/32" x 3", Zinc
1/4" x 3", Zinc
Cotter
Standard Pack Qty.
100
50
11
Fasteners
Cotter (standard square Cut)
Table 11-38: Fasteners - Clevis & Cotter Pins (U.S.) - Standard Square Cut
Description
3/32" x 1/2", Zinc
5/32" x 1-1/2", Zinc
Standard Pack Qty.
5
100
FASTENERS
Part No.
HWC06971
HWC07128
TRP100EN-A
Fastener Assortment
11-47
Fasteners
11
FASTENER ASSORTMENTS
Fastener assortMent For hwu10000
Table 11-39: Fasteners - Fastenter Assortments for HWU1000
Part No.
SubType
Flat washers
HWU11403
HWU11416
HWU11429
HWU11442
hex nuts
FASTENERS
HWU11299
HWU11312
HWU11325
HWU11338
HWU11351
HWU11721
HWU11734
HWU11760
M8, Grade 10.9, Zinc
M10, Grade 10.9, Zinc
M12, Grade 10.9 Zinc Round Washer
M16, Grade 10.9, Zinc
M6-1.00, Grade 10, Zinc
M8-1.25, Grade 10, Zinc
M10-1.50, Grade 10, Zinc
M12-1.75, Grade 10, Zinc
M16-2.00, Grade 10, Zinc
M6-1.00, SL MTL, Grade 10, Zinc
M8-1.25, SL MTL, Grade 10, Zinc
M12-1.75, SL MTL, Grade 10, Zinc
MetriC hex Bolts
HWU10129
HWU10155
HWU10168
HWU10181
HWU10207
HWU10220
HWU10272
HWU10298
HWU10311
HWU10324
HWU10337
HWU10350
HWU10363
11-48
M6-1.00 x 20, Grade 10.9, Zinc
M6-1.00 x 30, Grade 10.9, Zinc
M6-1.00 x 35, Grade 10.9, Zinc
M6-1.00 x 40, Grade 10.9, Zinc
M6-1.00 x 50, Grade 10.9, Zinc
M6-1.00 x 60, Grade 10.9, Zinc
M8-1.25 x 20, Grade 10.9, Zinc
M8-1.25 x 30, Grade 10.9, Zinc
M8-1.25 x 35, Grade 10.9, Zinc
M8-1.25 x 40, Grade 10.9, Zinc
M8-1.25 x 45, Grade 10.9, Zinc
M8-1.25 x 50, Grade 10.9, Zinc
M8-1.25 x 60, Grade 10.9, Zinc
Fastener Assortment
Description
Standard
Pack Qty.
Flat Washer
Flat Washer
Flat Washer
Flat Washer
100
100
50
50
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Hex Nut
100
100
50
60
25
200
100
50
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
50
25
25
25
25
25
50
25
25
25
25
25
25
Fasteners
Part No.
HWU10376
HWU10428
HWU10454
HWU10480
HWU10558
HWU10571
HWU10597
HWU10623
HWU10649
HWU10675
HWU10727
HWU10740
HWU10766
HWU10792
HWU10805
HWU10818
HWU10831
HWU10844
HWU10857
HWU10870
HWU10909
HWU20285
HWU20402
HWU20415
HWU20441
HWU20467
HWU20532
SubType
M8-1.25 x 70, Grade 10.9, Zinc
M10-1.50 x 30, Grade 10.9, Zinc
M10-1.50 x 40, Grade 10.9, Zinc
M10-1.50 x 50, Grade 10.9, Zinc
M10-1.50 x 80, Grade 10.9, Zinc
M10-1.50 x 90, Grade 10.9, Zinc
M12-1.75 x 20, Grade 10.9, Zinc
M12-1.75 x 30, Grade 10.9, Zinc
M12-1.75 x 40, Grade 10.9, Zinc
M12-1.75 x 50, Grade 10.9, Zinc
M12-1.75 x 70, Grade 10.9, Zinc
M12-1.75 x 80, Grade 10.9, Zinc
M12-1.75 x 100, Grade 10.9, Zinc
M12-1.75 x 120, Grade 10.9, Zinc
M16-2.00 x 30, Grade 10.9, Zinc
M16-2.00 x 40, Grade 10.9, Zinc
M16-2.00 x 50, Grade 10.9, Zinc
M16-2.00 x 60, Grade 10.9, Zinc
M16-2.00 x 70, Grade 10.9, Zinc
M16-2.00 x 80, Grade 10.9, Zinc
M16-2.00 x 120, Grade 10.9, Zinc
M8-1.25 x 25, Grade 10.9, Zinc
M10-1.50 x 20, Grade 10.9, Zinc
M10-1.50 x 25, Grade 10.9, Zinc
M10-1.50 x 35, Grade 10.9, Zinc
M10-1.50 x 45, Grade 10.9, Zinc
M10-1.50 x 70, Grade 10.9, Zinc
split-loCK washers
HWU11481
HWU11494
HWU11507
HWU11520
HWU11533
TRP100EN-A
M6, Grade 10.9, Zinc
M8, Grade 10.9, Zinc
M10, Grade 10.9, Zinc
M12, Grade 10.9, Zinc
M16, Grade 10.9, Zinc
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Hex Bolt Metric
Standard
Pack Qty.
25
50
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
50
50
50
50
25
25
Split-Lock Washer
Split-Lock Washer
Split-Lock Washer
Split-Lock Washer
Split-Lock Washer
100
100
100
50
50
Description
Fastener Assortment
FASTENERS
11
11-49
Fasteners
11
Fastener assortMent For hwu11301
Table 11-40: Fasteners - Fastenter Assortments for HWU11301
Part No.
SubType
Flat washers
HWU05717
HWU05730
HWU05743
HWU05756
HWU05769
HWU05795
HWU05808
HWU05873
HWU05899
HWU05925
HWU05938
HWU11390
1/4" SAE, Grade 8, Zinc Yellow
5/16" SAE, Grade 8, Zinc Yellow
3/8" SAE, Grade 8, Zinc Yellow
7/16" SAE, Grade 8, Zinc Yellow
1/2" SAE, Grade 8, Zinc Yellow
5/8" SAE, Grade 8, Zinc Yellow
3/4" SAE, Grade 8, Zinc Yellow
3/8" USS, Grade 8, Zinc Yellow
1/2" USS, Grade 8, Zinc Yellow
5/8" USS, Grade 8, Zinc Yellow
3/4" USS, Grade 8, Zinc Yellow
M6, Grade 10.9, Zinc
FASTENERS
Grade 8 hex Bolts
HWU00777
HWU00803
HWU00829
HWU00855
HWU01193
HWU01219
HWU01245
HWU01271
HWU01739
HWU01765
HWU01947
HWU01960
HWU01986
HWU01999
HWU03182
HWU03208
11-50
3/8"-16 x 2-1/2", Grade 8, Zinc Yellow
3/8"-16 x 3", Grade 8, Zinc Yellow
3/8"-16 x 3-1/2", Grade 8, Zinc Yellow
3/8"-16 x 4", Grade 8, Zinc Yellow
1/2"-13 x 1-1/2", Grade 8, Plain
1/2"-13 x 2", Grade 8, Zinc Yellow
1/2"-13 x 2-1/2", Grade 8, Zinc Yellow
1/2"-13 x 3", Grade 8, Zinc Yellow
5/8"-11 x 2-1/2", Grade 8, Zinc Yellow
5/8"-11 x 3", Grade 8, Zinc Yellow
3/4"-10 x 1-1/4", Grade 8, Zinc Yellow
3/4"-10 x 1-1/2", Grade 8, Zinc Yellow
3/4"-10 x 2", Grade 8, Zinc Yellow
3/4"-10 x 2-1/4", Grade 8, Zinc Yellow
3/8"-24 x 2-1/2", Grade 8, Zinc Yellow
3/8"-24 x 3", Grade 8, Zinc Yellow
Fastener Assortment
Description
Standard
Pack Qty.
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Flat
100
100
100
100
100
50
50
100
100
50
50
100
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
100
100
50
50
50
50
50
50
25
25
25
25
25
25
100
100
Fasteners
Part No.
HWU03234
HWU03260
HWU03624
HWU03650
HWU03676
HWU03702
HWU04118
HWU04144
HWU04170
HWU04482
HWU04508
hex nuts
HWU05249
HWU05275
HWU05288
HWU05379
HWU05405
HWU05418
SubType
3/8"-24 x 3-1/2", Grade 8, Zinc Yellow
3/8"-24 x 4", Grade 8, Zinc Yellow
1/2"-20 x 1-1/2", Grade 8, Zinc Yellow
1/2"-20 x 2", Grade 8, Zinc Yellow
1/2"-20 x 2-1/2", Grade 8, Zinc Yellow
1/2"-20 x 3", Grade 8, Zinc Yellow
5/8"-18 x 2", Grade 8, Zinc Yellow
5/8"-18 x 2-1/2", Grade 8, Zinc Yellow
5/8"-18 x 3", Grade 8, Zinc Yellow
3/4"-16 x 2-1/2", Grade 8, Zinc Yellow
3/4"-16 x 3", Grade 8, Zinc Yellow
1/2"-13, Grade 8, Zinc Yellow
5/8"-11, Grade 8, Zinc Yellow
3/4"-10, Grade 8, Zinc Yellow
1/2"-20, Grade 8, Zinc Yellow
5/8"-18, Grade 8, Zinc Yellow
3/4"-16, Grade 8, Zinc Yellow
MetriC hex Bolts
HWU10142
HWU10506
M6-1.00 x 25, Grade 10.9, Zinc
M10-1.50 x 60, Grade 10.9, Zinc
split-loCK washers
HWU06029
HWU06055
HWU06068
1/2", Grade 8, Zinc
5/8, Grade 8, Zinc
3/4", Grade 8, Zinc
top-loCK hex nuts
HWU04989
HWU05015
HWU05028
HWU05067
HWU05080
HWU05093
TRP100EN-A
1/2"-13, Grade 8, Zinc
5/8"-11, Grade 8, Zinc
3/4"-10, Grade 8, Zinc
1/4"-28, Grade 8, Zinc
5/16"-24, Grade 8, Zinc
3/8"-24, Grade 8, Zinc
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Hex Bolt Grade 8
Standard
Pack Qty.
50
50
50
50
50
50
25
25
25
25
25
Hex Nuts
Hex Nuts
Hex Nuts
Hex Nuts
Hex Nuts
Hex Nuts
50
25
20
50
25
20
Hex Bolt Metric
Hex Bolt Metric
25
25
Split-Lock
Split-Lock
Split-Lock
100
50
50
Top Lock
Top Lock
Top Lock
Top Lock
Top Lock
Top Lock
50
50
50
100
100
100
Description
Fastener Assortment
FASTENERS
11
11-51
Fasteners
11
Part No.
HWU05106
HWU05119
HWU05145
SubType
7/16"-20, Grade 8, Zinc
1/2"-20, Grade 8, Zinc
5/8"-18, Grade 8, Zinc
FASTENERS
11-52
Fastener Assortment
Description
Top Lock
Top Lock
Top Lock
Standard
Pack Qty.
50
50
50
11
Fasteners
GROMMETS
Brass
Table 11-41: Fasteners - Grommets - Brass
Part No.
HWC07922
Description
Brass Grommet with #3 Washer
Standard Pack Qty.
10
polyethylene
Table 11-42: Fasteners - Grommets - Polyethylene
Description
3/4" O.D. Black Polyethylene Grommet
Standard Pack Qty.
10
FASTENERS
Part No.
HWC22713
ruBBer
Table 11-43: Fasteners - Grommets - Rubber
Part No.
HWC04800
HWC12403
TRP100EN-A
Description
1-1/4" x 1/2" x 3/16" Rubber Grommet, Split
13/16" x 1/2" x 1/8" Rubber Grommet
Standard Pack Qty.
1
100
Grommets
11-53
Fasteners
11
HUCK BOLTS
huCK Bolts
Table 11-44: Fasteners - Huck Bolts
Part No.
HWC02220
HWC02234
Description
1/4”, Steel, Cadmium
1/4” x 1.937”, C137LT, Polished Stainless Steel
Standard Pack Qty.
25
10
Blind huCK Bolts
Table 11-45: Fasteners - Huck Bolts - Blind
Part No.
HWC02716
Description
3/16" x 1.788", Zinc, Flush Head
Standard Pack Qty.
50
FASTENERS
Brazier huCK Bolts
Table 11-46: Fasteners - Huck Bolts - Brazier
Part No.
HWC04675
HWC01028
HWC02222
HWC02644
HWC04060
HWC04381
HWU12370
11-54
Description
1/4" x 1.965", Zinc Phosphate MGPB Huck Pin Brazier
1/4" x 1.965", Cadmium
1/4" x 2.56", Zinc
3/16" x 1.788", T6 Aluminum
3/16" x 1.788", Plain
1/4" x 1.965", Plain
1/4" x 1.965", Zinc
Huck Bolts
Standard Pack Qty.
75
50
50
10
5
50
100
11
Fasteners
truss head huCK Bolts
HWC01844
HWC02236
HWC06111
Part No.
HWC00910
HWC00914
HWC01030
HWC01834
HWC01836
HWC01837
HWC01838
HWC01840
HWC01842
HWC01844
HWC01848
HWC01860
HWC02217
HWC02236
HWC02646
HWC02714
HWC06111
HWC11055
TRP100EN-A
Description
1/4" x 2.125", C120LT, Grade 5", Plain
1/4" x 1.938", C120LT, Grade 5", Plain
1/4" x 2.56", Zinc
3/16" x 2.125", Polished Stainless Steel
3/16" x 1.563", Stainless Steel
3/16" x 2", Polished Stainless Steel
3/16" x 1.688", Stainless Steel
3/16" x 1.75", Stainless Steel
3/16" x 1.813", Stainless Steel
3/16" x 1.938", Polished Stainless Steel
1/4" x 1.965", T6 Aluminum
5/16" x 2.34", Zinc
3/16" x 1.788", T6 Aluminum
3/16" x 1.788", Zinc
1/4" x 1.965", Zinc
3/16" x 2.375", Zinc
3/16" x 1.788", Zinc Phosphate
5/16” x 1/2”, Wave, Zinc
Standard Pack Qty.
50
50
25
15
25
100
25
25
25
25
15
4
10
75
50
50
50
50
Huck Bolts
11-55
FASTENERS
Table 11-47: Fasteners - Huck Bolts - Truss Head
Fasteners
11
HUCK COLLARS
huCK Collars (MetriC)
HWC03086
Table 11-48: Fasteners - Huck Collars (Metric)
Part No.
HWC00916
HWC02098
HWC02118
HWC03086
HWC06363
Description
Standard Pack Qty.
25
25
10
10
10
12mm, Grade 10, Plain
8mm x 23.81, Grade 5", Zinc Yellow
M12 Huck Collar
16mm, Grade 10, Plain
16mm, Grade 10, Zinc Yellow
FASTENERS
huCK Collars (u.s.)
HWC02106
HWC02110
Table 11-49: Fasteners - Huck Collars (U.S.)
Part No.
HWC01333
HWC01389
HWC02092
HWC02093
HWC02103
HWC02104
HWC02106
11-56
Description
1/4", Flange, 6061 Aluminum
3/16" x 0.308-0.358, with Lock, Plain
3/16" x 0.290-0.320, Plain
3/16", Flange, Zinc
3/16" x 0.308-0.358, Aluminum
3/16" x 0.308-0.358, Zinc
3/16" x 0.308-0.358, Zinc Yellow
Huck Collars
Standard Pack Qty.
50
75
75
75
25
75
100
11
Part No.
HWC02110
HWC02114
HWC02116
HWC02124
HWC02126
HWC02130
HWC02132
HWC04744
HWC04748
HWC06750
HWC07107
Fasteners
Description
1/4" x 0.399-0.399, Zinc Yellow
1/4" x 0.370-0.380, Zinc Yellow
3/16" x 0.270-0.280, Zinc Yellow
1/4" Huck Flanged Collar
3/16", Cadmium
5/16" Radiator Flanged Collar
1/2" Set Flanged Collar
1/4" x 0.370-0.380, Aluminum
3/16", Flange, Cadmium
1/4", Flange, Zinc
1/4" x 0.399-0.399, with Lock, Zinc Yellow
Standard Pack Qty.
50
75
100
50
50
5
4
25
2
75
50
FASTENERS
huCK Fastener tools
Table 11-50: Fasteners - Huck Fastener Tools
Part No.
HWC02101
Description
Huck Gun, Pneudraulic
Standard Pack Qty.
1
huCK Fit FlanGed hex head (MetriC)
Table 11-51: Fasteners - Huck Fit Flanged Hex Head (Metric)
Part No.
HWC00904
HWC00920
HWC00926
HWC00928
TRP100EN-A
Description
M20 x 146.4, Grade 10.9
M12 x 97.6, Grade 10.9
M16 x 115.2, Grade 10.9
M16 x 120.2, Grade 10.9
Standard Pack Qty.
4
15
5
10
Huck Tools
11-57
Fasteners
11
Part No.
HWC00930
HWC00932
HWC00934
HWC00936
HWC00938
HWC00944
HWC01032
HWC01850
HWC01854
HWC01856
HWC01858
HWC02216
HWC02604
HWC02650
HWC06365
HWC11055
Description
M12 x 107.6, Grade 10.9
M12 x 112.6, Grade 10.9
M16 x 105.2, Grade 10.9
M16 x 150.2, Grade 10.9
M16 x 160.2, Grade 10.9
M20 x 136.4, Grade 10.9
M16 x 135.2, Grade 10.9
M12 x 92.6, Grade 10.9
M12 x 102.6, Grade 10.9
M16 x 140.2, Grade 10.9
M16 x 130.2, Grade 10.9
M12 x 117.6, Grade 10.9
M16 x 125.2, Grade 10.9
M16 x 110.2, Grade 10.9
M16 x 165.2, Grade 10.9
5/16” x 1/2”, Wave, Zinc
Standard Pack Qty.
10
10
10
4
4
4
4
10
10
4
5
10
4
5
4
50
FASTENERS
huCK pins
Table 11-52: Fasteners - Huck Pins
Part No.
HWC01862
HWC04656
HWC07105
HWC07244
11-58
Description
3/16" x 2" Stainless Steel Polished C98LT Huckbolt Pin Truss
1/4" Diameter Zinc MFP90 Type Huck Pin
1/4" x 2.56" MGPTC Huck Pin Brazier
1/4" MBCP Steel Huck Pin Brazier Head
Huck Tools
Standard Pack Qty.
25
10
10
2
11
Fasteners
INSERTS
Blind nut inserts
Table 11-53: Fasteners - Inserts - Blind Insert Nuts
Part No.
Measurement
Additional
Information
Thread
Standard
UNC
Unit of
Measure
U.S.
Material/
Finish
Aluminum
Standard
Pack Qty.
5
Additional
Information
Hardened
Thread
Standard
UNC
UNC
Unit of
Measure
U.S.
U.S.
Material/
Finish
Zinc Yellow
Aluminum
Standard
Pack Qty.
5
100
Additional
Information
Thread
Standard
UNC
UNC
Unit of
Measure
U.S.
U.S.
Material/
Finish
Zinc Yellow
n/a
Standard
Pack Qty.
10
4
Additional
Information
Thread
Standard
ISO
Unit of
Measure
Metric
Material/
Finish
Zinc Yellow
Standard
Pack Qty.
5
1/4"-20
HWC08202
Blind inserts
Part No.
Measurement
3/8"-16
1/4"-20
HWC06847
HWC07049
Molly JaCKnut threaded inserts
Table 11-55: Fasteners - Inserts - Molly Jacknut Threaded Inserts
Part No.
Measurement
1/4"
1/4"-20
HWC02246
HWC02248
nut inserts
Table 11-56: Fasteners - Insert Nuts
Part No.
HWC04895
TRP100EN-A
Measurement
M6-1.0
Inserts
11-59
FASTENERS
Table 11-54: Fasteners - Inserts - Blind Inserts
Fasteners
11
nutsert inserts
Table 11-57: Fasteners - Inserts - NutSerts
Part No.
HWC02568
HWC02570
HWC04007
HWC04952
Measurement
Additional
Information
Thread
Standard
UNC
UNC
ISO
UNC
Unit of
Measure
U.S.
U.S.
Metric
U.S.
Material/
Finish
Cadmium
Zinc
Cadmium
Cadmium
Standard
Pack Qty.
10
10
4
10
Additional
Information
Thread
Standard
UNF
Unit of
Measure
U.S.
Material/
Finish
Nylon
Standard
Pack Qty.
25
Thread
Standard
ISO
ISO
ISO
ISO
UNC
UNC
Unit of
Measure
Metric
Metric
U.S.
Metric
U.S.
U.S.
Material/
Finish
Cadmium
Cadmium
Cadmium
Aluminum
Cadmium
Zinc Yellow
Cadmium
Yellow
n/a
Zinc
Cadmium
Standard
Pack Qty.
10
5
10
10
5
5
1/4"-20
1/4"-20
M10-1.5
1/4"-20
plastiC insert nut inserts
Table 11-58: Fasteners - Inserts - Plastic Insert Nuts
Part No.
HWC04938
Measurement
#8 / #10 x 4.5
FASTENERS
rivnut inserts
Table 11-59: Fasteners - Inserts - Rivnuts
Part No.
Measurement
Additional
Information
HWC01059
HWC01381
HWC02744
HWC02746
HWC02750
HWC02752
M6 x 1.0
M6
M6 x 1.0
M6-1.0 x 21.50
5/16"-18
3/8"-16 x 32.81
Hardened
HWC02754
3/8"-16
UNC
U.S.
HWC02776
HWC02778
HWC02782
1/4"-20
1/4"-20
1/4"-20
UNC
UNC
UNC
U.S.
U.S.
U.S.
11-60
Inserts
2
10
4
4
11
Fasteners
Part No.
Measurement
Additional
Information
Thread
Standard
ISO
UNF
ISO
Unit of
Measure
Metric
U.S.
Metric
Material/
Finish
Aluminum
n/a
Zinc Yellow
Standard
Pack Qty.
2
5
4
HWC02784
HWC07174
HWC10004
8mm
#10-32 x 0.781"
M6-1.00 x 33.13
Hardened
Thread
Standard
ISO
ISO
ISO
ISO
Unit of
Measure
Metric
Metric
Metric
Metric
Material/
Finish
Cadmium
Cadmium
Cadmium
n/a
Standard
Pack Qty.
10
4
10
10
Additional
Information
Thread
Standard
UNC
Unit of
Measure
U.S.
Material/
Finish
Aluminum
Standard
Pack Qty.
5
Thread
Standard
ISO
ISO
ISO
Unit of
Measure
Metric
Metric
Metric
Material/
Finish
Zinc Yellow
Zinc
Cadium
Standard
Pack Qty.
5
10
10
selF-retaininG nutsert inserts
Table 11-60: Fasteners - Inserts - Self-Retaining NutSerts
Measurement
Additional
Information
HWC02021
HWC04954
HWC04977
HWC04995
M10 x 1.50
M10-1.50 x 22.5
M4 x 0.7-6
M6 x 1
Hex, AVK
FASTENERS
Part No.
threaded Blind inserts
Table 11-61: Fasteners - Inserts - Threaded Blind
Part No.
HWC08204
Measurement
1/4"-20
threaded inserts
Table 11-62: Fasteners - Inserts - Threaded
Part No.
Measurement
Additional
Information
HWC04948
HWC04960
HWC05080
M10-1.50 x 20.45
M10-1.50 x 22.5
M10-1.50 x 25
Hardened
TRP100EN-A
Inserts
11-61
Fasteners
11
FASTENERS
Thread
Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Unit of
Measure
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
Metric
AK, Hardened
UNF
U.S.
Hardened
UNC
U.S.
1/4"-20 x 1.190
UNC
U.S.
HWC02011
HWC02007
HWC02009
HWC02001
HWC00229
5/16"-18 x 0.805
#10-24 x 0.475"
#10-32 x 0.475"
#6-32 x 0.470"
1/4"-20
UNC
UNC
UNF
UNC
UNC
U.S.
U.S.
U.S.
U.S.
U.S.
HWC06812
3/8"-16 x 1.390"
UNC
U.S.
HWC10172
M6-1.00 x 17.27
M8-1.25 x 3.807.90
M8-1.25 x 35.31
AK
ISO
Metric
Closed End
ISO
Metric
n/a
5
ISO
Metric
Zinc Yellow
4
Part No.
Measurement
HWC04976
HWC04962
HWC04966
HWC04980
HWC04978
HWC04968
HWC05078
HWC02758
HWC04990
HWC04713
HWC04970
HWC04984
HWC01251
HWC10002
HWC01253
HWC10185
M10-1.50 x 27.5
M10-1.50 x 30
M4-0.70 x 10.67
M4-0.70 x 15
M5-0.80 x 12.07
M5-0.80 x 14.86
M5-0.80 x 15
M5-0.80 x 16
M5-0.80 x 18.9
M6-1.00 x 14.73
M6-1.00 x 14.73
M6-1.00 x 17.62
M6-1.00 x 30.23
M6-1.00 x 30.23
M6-1.00 x 30.23
M8-1.25 x 17.53
HWC06814
#10-32 x 0.990
HWC02005
1/4"-20 x 0.680
HWC06820
HWC07172
HWC01257
11-62
Inserts
Additional
Information
Hardened
Hardened
Hardened
Hardened
Hardened
Material/ Standard
Finish
Pack Qty.
Zinc
4
Cadium
4
Zinc Yellow
10
Cadmium
10
Zinc Yellow
4
Zinc Yellow
4
Zinc Yellow
10
Aluminum
4
Zinc Yellow
10
Zinc Yellow
4
Zinc Yellow
6
Zinc Yellow
10
Zinc Yellow
4
Zinc Yellow
10
Zinc Yellow
4
Zinc Yellow
10
Cadmium
25
Yellow
Steel
10
AL/Steel/Zinc
10
Yellow
Zinc Yellow
4
Steel
10
Steel
10
Steel
100
Zinc Yellow
4
Cadmium
10
Yellow Steel
Steel
10
11
Fasteners
threaded nutsert inserts
Table 11-63: Fasteners - Inserts - Threaded Nutserts
Part No.
HWC06826
Measurement
Additional
Information
5/16"-18
Thread
Standard
Unit of
Measure
UNC
U.S.
Thread
Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNC
UNC
Unit of
Measure
U.S.
U.S.
U.S.
U.S.
U.S.
U.S.
U.S.
U.S.
U.S.
UNC
U.S.
UNC
U.S.
Material/
Finish
Cadmium
Yellow Steel
Standard
Pack Qty.
Standard
Pack Qty.
15
2
4
5
4
4
2
15
25
4
threaded rivnut inserts
Part No.
Measurement
HWC02768
HWC02770
HWC06822
HWC07248
HWC07254
HWC07256
HWC07260
HWC07264
HWC07266
#10-24
1/4"-20 x 0.750
1/4"-20 x 1.250
1/4"-20 x 0.750
3/8"-16 x 0.840"
3/8"-16 x 1.030
1/2"-20 x 0.906
1/4"-20 x 0.625
1/4"-20 x 0.937"
HWC07268
1/4"-20 x 1.125
HWC07270
1/4"-20 x 1.000
HWC07274
1/4"-20 x 1.059
UNC
U.S.
HWC07276
1/4"-20 x 1.185
UNC
U.S.
HWC07278
HWC07280
#10-24 x 0.594"
3/8"-16 x 1.562
5/16"-18NC x
0.875"
1/4"-20
M4-0.70
M6-1.00
M8-1.25
#10-32
UNC
UNC
U.S.
U.S.
Material/
Finish
Cadmium
Aluminum
Zinc
Zinc Yellow
Cadmium
Zinc
Zinc
Zinc
Cadmium
Cadmuim
Wax
Zinc
Cadmium
Wax
Cadmium
Wax
Cadmium
Zinc
UNC
U.S.
Cadmium
4
UNC
ISO
ISO
ISO
UNF
U.S.
Metric
Metric
Metric
U.S.
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
Zinc Yellow
15
100
50
15
100
HWC07282
HWU10106
HWU10119
HWU10145
HWU10158
HWU10171
TRP100EN-A
Additional
Information
Hardened
Hardened
Hardened
Hardened
Hardened
GS
GS
GS
GS
Inserts
25
10
25
5
2
2
11-63
FASTENERS
Table 11-64: Fasteners - Inserts - Threaded Rivnut
Fasteners
Part No.
HWU10184
HWU10197
11
Measurement
1/4"-20
5/16"-18
Additional
Information
Thread
Standard
UNC
UNC
Unit of
Measure
U.S.
U.S.
Material/
Finish
Zinc Yellow
Zinc Yellow
Standard
Pack Qty.
15
25
threaded wellnut inserts
Table 11-65: Fasteners - Inserts - Threaded Wellnut
Part No.
HWC02592
HWC07114
HWC07118
Measurement Thread Standard Unit of Measure Material/Finish Standard Pack Qty.
#10-32
UNF
U.S.
Neoprene / Black
10
3/8"-16 x 0.875"
UNC
U.S.
Steel
2
1/4"-20 x 1
UNC
U.S.
Brass
10
FASTENERS
wedGe head inserts
Table 11-66: Fasteners - Inserts - Wedge Head
Part No.
HWC04991
Pack
Measurement Thread Standard Unit of Measure Material/Finish Standard
Qty.
#10-24
UNC
U.S.
Cadmium
10
wellnut inserts
Table 11-67: Fasteners - Inserts - WellNuts
Part No.
HWC02594
11-64
Pack
Measurement Thread Standard Unit of Measure Material/Finish Standard
Qty.
1/4"-20
UNC
U.S.
Steel / Neoprene
10
Inserts
11
Fasteners
thread rod inserts
Table 11-68: Fasteners - Inserts - Thread Rod
Part No.
HWC12222
Pack
Measurement Thread Standard Unit of Measure Material/Finish Standard
Qty.
3/8"-24 x 18"
UNF
U.S.
Zinc / Phosphate
1
threaded inserts
Table 11-69: Fasteners - Inserts - Threaded
Part No.
M5-0.80 x 12.07
ISO
Metric
Steel / Cadmium
Standard Pack
Qty.
25
FASTENERS
HWC04950
Measurement Thread Standard Unit of Measure Material/Finish
TRP100EN-A
Inserts
11-65
Fasteners
11
KITS
Mud Flap Kit
Table 11-70: Fasteners - Mud Flap Kit
Part No.
HWC07059
HWC07057
Description
Mud Flap Fastener Kit, Grade 5, Polished
Mud Flap Fastener Kit, Grade 5, Zinc
nut Kit
Table 11-71: Fasteners - Nut Kit
Description
M12-1.75, Grade 10, Zinc Nylon Locknut
11-66
Kits
FASTENERS
Part No.
HWU11660
Unit of Measure
Metric
Qty.
50
11
Fasteners
NUTS
Bolts
See Page 11-6
Grade 2 Castled hex nuts (u.s.)
Table 11-72: Fasteners - Grade 2 Castled Hex Nuts (U.S.)
Part No.
HWC02450
Thread Standard
UNF
Material/Finish
Cadmium / Zinc
Measurements
3/8"-24
Standard Pack Qty.
10
Grade 2 hex nuts (u.s.)
Part No.
Thread Standard
Material/Finish
Measurements
HWC02400
HWC02402
HWC02406
HWC02414
HWC02416
HWC02420
HWC02432
HWC02434
HWC02436
HWC02440
HWC02444
HWC02492
HWC02500
HWC02512
HWC02520
HWC02528
HWC02538
HWC02540
HWC04888
HWU08759
HWU08772
UNF
UNF
UNC
UNC
UNC
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNF
UNC
UNC
UNC
UNF
UNC
UNC
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Cadmium Zinc
Plain
Cadmium Zinc
Cadmium Zinc
Plain
Plain
Plain
Cadmium Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Plain
Cadmium Zinc
Zinc
Zinc
Zinc
9/16"-18 x 0.484”
1/2"-20 x 0.438”
1/4"-20 x 0.218”
3/8"-16 x 0.328”
3/8"-16
3/8"-24 x 0.328”
5/8"-11
5/8"-18 x 0.546”
7/16"-20 x 0.375”
7/8"-14
9/16"-18
1/4"-28
3/4"-10 x 0.641”
5/16"-18 x 0.266”
5/16"-24 x 0.266”
7/16"-14
9/16"-12
1/2"-13 x 0.438”
#6-32
#8-32
#10-24
TRP100EN-A
Description
Standard
Pack Qty.
25
50
50
25
15
100
15
10
25
10
25
25
25
10
25
25
25
25
50
100
100
Nuts
11-67
FASTENERS
Table 11-73: Fasteners - Grade 2 Hex Nuts (U.S.)
Fasteners
11
Part No.
Thread Standard
Material/Finish
Measurements
Description
HWU08785
HWU08798
HWU08811
UNC
UNC
UNF
Zinc
Zinc
1/4"-20
#10-32
1/4"-28 x 0.125"
Thick
Standard
Pack Qty.
50
100
10
Grade 2 hex JaM nuts (u.s.)
Table 11-74: Fasteners - Grade 2 Hex Jam Nuts (U.S.)
Part No.
HWC02450
Thread Standard
UNF
Material/Finish
Cadmium / Zinc
Measurements
3/8"-24
Standard Pack Qty.
10
Material/Finish
Plain
Zinc / Clear
Zinc / Clear
Zinc / Clear
Zinc / Clear
Zinc / Clear
Zinc / Clear
Measurements
5/16"-24 x 0.188”
#6-32
#8-32
#10-32
#10-24
#12-24
1/4"-20
Standard Pack Qty.
25
100
100
100
100
100
100
Grade 2 Keps hex nuts (u.s.)
FASTENERS
Table 11-75: Fasteners - Grade 2 Kep Hex Nuts (U.S.)
Part No.
HWC02558
HWU08941
HWU08954
HWU08967
HWU08980
HWU08993
HWU09019
Thread Standard
UNF
UNC
UNC
UNF
UNC
UNC
UNC
Grade 5 hex nuts (u.s.)
Table 11-76: Fasteners - Grade 5 Hex Nuts (U.S.)
Part No.
Thread Standard Material/Finish Measurements
UNF
UNF
UNF
HWC04878
HWC04884
HWC06960
11-68
Nuts
Cadmium
Cadmium
Zinc / Clear Iridite
3/8"-24 x 0.328”
1/2"-20 x 0.438”
1/4"-28 x 0.218”
Description
Left Hand Thread
Standard Pack
Qty.
25
75
125
11
Fasteners
Part No.
HWC06964
HWC06982
HWC06994
HWC06998
HWC07012
HWC07022
HWC07050
HWC07064
HWC07080
Thread Standard Material/Finish Measurements
UNC
UNC
UNC
UNF
UNF
UNC
UNF
UNF
UNC
Zinc / Clear Iridite
Zinc
Zinc / Clear Iridite
Plain
Zinc
Zinc
Zinc
Zinc
Zinc / Black
3/8"-16 x 0.328”
#10-24 x 0.125”
1/4"-20 x 0.218”
3/4"-16 x 1.00”
5/16"-24 x 0.266”
7/16"-14 x 0.375”
1/2"-20 x 0.438”
1/2"-20 x 0.438”
5/16"-18 x 0.266”
High
Standard Pack
Qty.
75
25
100
5
125
50
10
25
10
Description
Standard
Pack Qty.
Description
HWC07084
Table 11-77: Fasteners - Grade 5 Hex Flange Nuts (U.S.)
Part No.
HWC07084
HWC12600
Thread
Standard
UNF
UNF
Material/
Finish
Zinc
Cadmium
Measurements
5/8"-18 x 0.669” Slotted
5/16"-24 x 0.266”
10
50
Grade 5 nylon hex JaM loCKnut nuts (u.s.)
Table 11-78: Fasteners - Grade 5 Hex Jam Nylon Locknut (U.S.)
Part No.
HWC00101
HWC00115
TRP100EN-A
Thread
Standard
UNF
UNC
Material/
Finish
Cadmium
Cadmium
Measurements
Standard
Pack Qty.
Description
1-1/4"-12 x 1.391” N1610
3/8"-16 x 0.453” High Tensile
1
5
Nuts
11-69
FASTENERS
Grade 5 hex FlanGe nuts (u.s.)
Fasteners
11
Grade 5 Keps hex JaM nuts (MetriC)
Table 11-79: Fasteners - Grade 5 Keps Hex Jam Nut (Metric)
Thread
Standard
ISO
Part No.
HWC05008
Material/
Finish
Zinc
Measurements
M6 x 1”
Standard
Pack Qty.
50
Grade 5 hex JaM nuts (u.s.)
Table 11-80: Fasteners - Grade 5 Hex Jam Nut (U.S.)
Thread
Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
Part No.
FASTENERS
HWC07079
HWC02482
HWC02498
HWC02504
HWC02552
HWC04898
HWC06988
HWC07060
HWC07062
HWU08519
Material/
Finish
Measurements
Description
Thick
Zinc
Cadmium Zinc
Cadmium Zinc
Plain
Cadmium Zinc
Cadmium
Zinc
Zinc / Yellow
Plain
1-1/8"-12 x 0.609"
5/16"-18
1"-14 x 0.546”
3/4"-16 x 0.422”
3/8"-24 x 0.218”
1/2"-20 x 0.313”
5/16"-24 x 0.266”
1-1/4"-12 x 0.718”
7/16"-14 x 0.250”
1/2"-13 x 0.313”
HWC06972
HWC01041
Standard
Pack Qty.
1
100
4
4
25
25
25
1
100
50
Grade 8 hex nuts (u.s.)
Table 11-81: Fasteners - Grade 8 Hex Nut (U.S.)
Thread
Standard
UNF
UNC
Part No.
HWC01041
HWC04886
11-70
Nuts
Material/
Finish
Cadmium
Cadmium
Measurements
Description
3/4"-16 x 1.00”
1/2"-13 x 0.563”
High
Standard
Pack Qty.
25
50
Fasteners
Part No.
HWC06972
HWC06990
HWC07014
HWC07030
HWC07056
HWU05197
HWU05210
HWU05223
HWU05236
HWU05249
HWU05262
HWU05275
HWU05288
HWU05301
HWU05314
HWU05327
HWU05340
HWU05353
HWU05366
HWU05379
HWU05392
HWU05405
HWU05418
HWU05422
HWU05431
HWU05435
HWU05444
TRP100EN-A
Thread
Standard
UNF
UNF
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Material/
Finish
Cadmium
Cadmium
Cadmium
Cadmium
Cadmium
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc / Yellow
Zinc
Zinc / Yellow
Zinc
Zinc / Yellow
Measurements
Description
1"-14 x 1.313”
1/2"-20 x 0.656”
5/8"-18 x 0.844”
7/8"-14 x 1.156”
1-1/4"-12 x 1.688”
1/4"-20
5/16"-18
3/8"-16
7/16"-14
1/2"-13
9/16"-12
5/8"-11
3/4"-10
7/8"-9
1"-8
1/4"-28
5/16"-24
3/8"-24
7/16"-20
1/2"-20
9/16"-18
5/8"-18
3/4"-16
3/4"-16 x 1.00”
7/8"-14
7/8"-14 x 1.156”
1"-14 NS
High
High
High
High
High
Standard
Pack Qty.
10
10
10
4
5
100
100
100
50
50
25
25
20
15
10
100
100
100
50
50
25
25
20
50
15
5
25
Nuts
11-71
FASTENERS
11
Fasteners
11
Grade 8 hex FlanGe nuts (u.s.)
Table 11-82: Fasteners - Grade 8 Hex Flange Nut (U.S.)
Thread
Standard
UNC
UNF
UNF
UNC
UNC
UNC
Part No.
HWU10636
HWU11931
HWU11944
HWU20623
HWU20649
HWU20662
Material/
Finish
Plain
Plain
Plain
Plain
Plain
Plain
Measurements
1/2"-13
5/8"-18
3/4"-16
3/8"-16
5/8"-11
3/4"-10
Standard
Pack Qty.
50
25
10
50
25
20
Grade 8 hex Metal loCK nuts (u.s.)
FASTENERS
Table 11-83: Fasteners - Grade 8 Hex Metal Lock Nut (U.S.)
Thread
Standard
UNF
UNF
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Part No.
HWC06840
HWC06900
HWC07072
HWU04937
HWU04950
HWU04963
HWU04976
HWU04989
HWU05002
HWU05015
HWU05028
HWU05041
HWU05054
11-72
Nuts
HWU05145
Material/
Finish
Cadmium
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Measurements
7/16"-20 x 0.375”
7/8"-14 x 0.750”
3/4"-16 x 0.641”
1/4"-20
5/16"-18
3/8"-16
7/16"-14
1/2"-13
9/16"-12
5/8"-11
3/4"-10
7/8"-9
1"-8
Standard
Pack Qty.
25
1
2
100
100
100
50
50
50
50
50
25
25
11
Fasteners
Part No.
HWU05067
HWU05080
HWU05093
HWU05106
HWU05119
HWU05132
HWU05145
HWU05171
HWU05184
Thread
Standard
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Material/
Finish
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Measurements
1/4"-28
5/16"-24
3/8"-24
7/16"-20
1/2"-20
9/16"-18
5/8"-18
7/8"-14
1"-14
Standard
Pack Qty.
100
100
100
50
50
50
10
25
25
Grade 8 hex nylon loCK nuts (u.s.)
HWC00099
HWC00107
HWC00113
HWC00119
HWC00147
HWC00149
HWC00151
HWC02296
Thread
Standard
UNF
UNC
UNF
UNC
UNF
UNF
UNF
UNF
HWC02374
UNF
Zinc / Yellow
5/16"-24 x 0.344”
HWC06866
UNF
Zinc / Yellow
7/16"-14 x 0.453”
HWC06868
UNF
Cadmium
3/4"-16 x 1.250”
HWC06874
UNF
Zinc
1"-14 x 1.672”
HWC06894
UNC
Cadmium
1-1/4"-12 x 2.031”
HWC06986
UNF
Cadmium
7/8"-14 x 1.438”
Part No.
TRP100EN-A
Material/
Measurements
Finish
Zinc / Yellow
1/2"-20
Cadmium Yellow 1/4"-28 x 0.313"
Cadmium
1-1/2"-20 x 3"
Zinc / Yellow
5/8"-11
Zinc / Yellow
7/16"-14
Cadmium
9/16"-18 x 0.641"
Zinc / Yellow
1-1/8"-12 x 1.172”
Cadmium Yellow 1/4"-20 x 0.313”
Description
N1610, Thick
NNY1610
NYY1610
Thick, N1610
N1610
N1610
High Carbon,
High Tensile
High Carbon,
High Tensile
N1260
High Carbon,
High Tensile
N1260
High Carbon,
High Tensile
Standard
Pack Qty.
50
5
1
50
50
10
2
10
5
4
4
1
1
2
Nuts
11-73
FASTENERS
Table 11-84: Fasteners - Grade 8 Hex Nylon Lock Nut (U.S.)
Fasteners
11
Thread
Standard
Material/
Finish
Measurements
Description
Standard
Pack Qty.
HWC07199
UNF
Zinc / Yellow
3/4"-16 x 0.875”
High Carbon,
High Tensile
4
HWU05446
HWU05447
HWU05448
HWU05457
HWU05470
HWU05483
HWU05496
HWU05509
HWU05522
HWU05548
HWU05561
HWU05574
HWU05587
HWU05600
HWU05613
HWU05626
HWU05639
HWU05652
HWU05665
HWU05691
UNC
UNF
UNC
UNC
UNC
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
Part No.
FASTENERS
Zinc / Yellow
1-1/4"-12 x 1.063”
Zinc / Yellow
1/4"-20 x 0.313”
Zinc / Yellow
5/16"-18 x 0.344”
Zinc / Yellow
3/8"-16 x 0.453”
Zinc / Yellow
7/16"-14 x 0.453”
Zinc / Yellow
9/16"-12 x 0.641”
Zinc / Yellow
3/4"-10 x 0.875”
Zinc / Yellow
7/8"-9 x 0.984”
Zinc / Yellow
1"-8 x 1.047”
Zinc / Yellow
1/4"-28 x 0.313”
Zinc / Yellow
5/16"-24 x 0.344”
Zinc / Yellow
3/8"-24 x 0.453”
Zinc / Yellow
7/16"-20 x 0.453”
Zinc / Yellow
1/2"-20 x 0.594”
Zinc / Yellow
9/16"-18 x 0.641”
Zinc / Yellow
5/8"-18 x 0.750”
Zinc / Yellow
7/8"-14 x 0.984”
Cadmium Yellow 1/2"-20 x 0.594”
Cadmium Yellow 5/8"-11 x 0.750”
Zinc / Yellow
1/2"-13 x 0.594”
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
N1610
1
100
100
100
100
50
25
25
25
100
100
100
100
100
50
50
25
10
10
100
Grade 10 hex nuts (MetriC)
Table 11-85: Fasteners - Grade 10 Hex Nut (Metric)
Thread
Standard
ISO
ISO
ISO
ISO
ISO
Part No.
HWC04906
HWC04918
HWC04924
HWC04930
HWC07052
11-74
Nuts
Material/
Finish
Measurements
Description
Thick
Zinc / Black
Cadmium
Cadmium
Zinc
M10-1.50 x 7.90mm
M5-0.80 x 4.35mm
M10-1.50 x 7.90mm
M6-1.00 x 5.45mm
M8-1.25 x 6.620mm
Standard
Pack Qty.
25
125
25
50
25
11
Fasteners
Part No.
HWU11299
HWU11312
HWU11325
HWU11338
HWU11351
HWU11364
Thread
Standard
ISO
ISO
ISO
ISO
ISO
ISO
Material/
Finish
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Measurements
Description
M6-1.00
M8-1.25
M10-1.50
M12-1.75
M16-2.00
M20-2.50
Standard
Pack Qty.
100
100
50
50
25
25
Grade 10 hex Metal loCK nuts (MetriC)
Part No.
HWU11721
HWU11734
HWU11760
HWC00198
Thread
Standard
ISO
ISO
ISO
ISO
Measurements
Description
Zinc / Clear
Zinc / Clear
Zinc / Clear
Magnesium
M6-1.00
M8-1.25
M12-1.75
M16-2.00 x 14.65mm
Standard
Pack Qty.
200
100
50
5
Grade 10 hex nylon loCK nuts (MetriC)
HWU02501
HWU02726
Table 11-87: Fasteners - Grade 10 Nylon Lock Nut (Metric)
Part No.
HWC04904
HWC04910
HWC04916
HWC07179
TRP100EN-A
Thread
Standard
ISO
ISO
ISO
ISO
Measurements
Description
Cadmium
Zinc / Yellow
Cadmium
Cadmium
M10-1.50 x 11.40mm
M16-2.00 x 18.50mm
M20-2.50 x 22.15mm
M12-1.75 x 14.40mm
Standard
Pack Qty.
25
4
10
20
Nuts
11-75
FASTENERS
Table 11-86: Fasteners - Grade 10 Metal Lock Nut (Metric)
Fasteners
11
Thread
Standard
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
Part No.
HWC12435
HWC12501
HWC12514
HWC12700
HWC12706
HWC12713
HWC12726
HWU11608
HWU11621
HWU11634
HWU11647
HWU11660
HWU11673
HWU11686
Measurements
Description
Cadmium
Zinc / Yellow
Cadmium
Cadmium
Cadmium
Cadmium
Cadmium
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
Zinc
M5-0.80 x 6.40mm
M16-2.00 x 18.50mm
M12-1.75 x 14.40mm
M10-1.50 x 11.40mm
M12-1.75 x 14.40mm
M8-1.25 x 11.40mm
M6-1.00 x 7.60mm
M5-0.80
M6-1.00
M8-1.25
M10-1.50
M12-1.75
M14-2.00
M16-2.00
Standard
Pack Qty.
25
20
50
50
50
50
50
200
200
100
100
50
25
25
FASTENERS
Grade 10.9 hex nuts (MetriC)
Table 11-88: Fasteners - Grade 10 Hex Nut (Metric)
Thread
Standard
ISO
Part No.
HWC04928
Measurements
Description
Magnesium
M20-2.50 x 18mm
Standard
Pack Qty.
4
Grade 10.9 Metal loCK nuts (MetriC)
Table 11-89: Fasteners - Grade 10 Metal Lock Nut (Metric)
Thread
Standard
Part No.
ISO
HWC06904
11-76
Nuts
Material/
Finish
Cadmium /
Clear
Measurements
Description
Standard
Pack Qty.
M12-1.75 x 10.985mm
Thick, Stover Nut
25
11
Fasteners
asseMBly nuts (MetriC)
Table 11-90: Fasteners - Nuts - Assembly (Metric)
Thread
Standard
Subtype
Material/
Finish
Measurements
HWC04842
ISO
Keps
Zinc
M5
HWC04844
ISO
Keps
Zinc
M5
Part No.
Description
Standard
Pack Qty.
With External
Star Washer
With Star Washer
25
25
asseMBly nuts (u.s.)
Table 11-91: Fasteners - Nut Assemblies (U.S.)
HWC00017
HWC00029
Thread
Standard
UNC
UNF
Material/
Finish
Zinc
Zinc
Measurements
Description
1/4"-20 x 0.281”
1/4"-28 x 0.313”
Thin, Heavy Tensile
Thin, Type NE, Proprietary Grade
Standard
Pack Qty.
50
50
FASTENERS
Part No.
assorted FlanGe nuts (u.s.)
Table 11-92: Fasteners - Assorted Flange Nuts (U.S.)
Part No.
HWC06858
Thread Standard
UNF
Measurements
1/2"-20 x 13/16"
Description
Standard Pack Qty.
Thick, Self-Locking Spline
1
assorted hex nuts (MetriC)
Table 11-93: Fasteners - Assorted Hex Nuts (Metric)
Part No.
HWC04431
HWC04565
HWC04920
TRP100EN-A
Thread
Standard
ISO
ISO
ISO
SubType
Material/
Finish
Brass
Stainless Steel
Stainless Steel
Measurements
Description
M8-1.25 x 6.40mm
M8-125
M5-0.80
Thick
Standard
Pack Qty.
125
10
10
Nuts
11-77
Fasteners
11
HWC04942
HWC06957
Thread
Standard
ISO
ISO
HWC06974
ISO
Part No.
SubType
Top Lock
Keps
Material/
Standard
Measurements
Description
Finish
Pack Qty.
Cadmium Zinc
M16
Prevailing Torque
15
Stainless Steel M10-1.50 x 8.22mm
10
With Pre-Assem20
External Steel
M4-0.70 x 4.030T
bled Star Washer
assorted hex nuts (u.s.)
Table 11-94: Fasteners - Assorted Hex Nuts (U.S.)
HWC00007
HWC02494
HWC04944
HWC06908
HWC06992
HWC07006
HWC07075
HWC07078
Thread
Standard
UNF
UNC
UNC
UNC
UNC
UNC
UNC
UNC
HWC10633
UNC
Part No.
FASTENERS
Material/
Measurements
Description
Finish
Zinc
1/4"-20 x 0.296” Locking Head, Serrated
PVC Plastic
5/8"-11 x 0.550”
Stainless Steel
1/4"-20 x 0.218”
Stainless Steel
3/8"-16 x 0.328”
Stainless Steel, Wax Coat
5/16"-18
Polished Stainless Steel
3/8"-16 x 0.328”
Stainless Steel
3/8"-16
Zinc
1/2"-20 x 0.594”
Thin, Type NE,
Hex Nut with Extended
Zinc
#10-24
Toothlock Washer
Standard
Pack Qty.
50
4
10
25
10
10
50
25
25
assorted hex FlanGe nuts (u.s.)
Table 11-95: Fasteners - Assorted Hex Flange Nuts (U.S.)
Thread
Standard
UNC
UNC
UNS
UNC
Part No.
HWC06601
HWC10638
HWC10642
HWU10602
11-78
Nuts
Material/
Finish
Zinc
Stainless Steel
Stainless Steel
Stainless Steel
Measurements
Description
5/16"-18 x 0.275"
7/16"-14
1/2"-14
10-24
Thick, Serrated
Standard
Pack Qty.
50
50
50
200
11
Fasteners
assorted hex JaM (u.s.)
Table 11-96: Fasteners - Assorted Hex Jam Nuts (U.S.)
Part No.
Thread
Standard
HWC04905
UNF
HWC12040
HWU10615
HWU10628
UNF
UNC
UNC
Material/
Finish
Hardened
Cadmium
Zinc
Stainless Steel
Stainless Steel
Measurements
Description
Standard
Pack Qty.
7/8"-14 x 0.906"
Thick, Slotted
1
1/2"-20
1/4"-20
5/16"-18
10
100
100
assorted hex JaM switCh nuts (u.s.)
Part No.
HWC07066
Material/
Finish
n/a
Measurements
Description
15/32" x 0.075"
Thick, Black
Material/
Finish
Plain
Measurements
Standard
Pack Qty.
25
assorted JaM (u.s.)
Table 11-98: Fasteners - Assorted Hex Jam Nut (U.S.)
Part No.
HWC02560
TRP100EN-A
Thread
Standard
UNF
5/16"-18
Standard
Pack Qty.
25
Nuts
11-79
FASTENERS
Table 11-97: Fasteners - Assorted Nuts - Hex Jam Switch (U.S.)
Fasteners
11
assorted Keps hex JaM nuts (u.s.)
Table 11-99: Fasteners - Assorted Keps Hex Jam Nuts (U.S.)
Thread
Standard
UNC
Part No.
HWC00013
Material/
Finish
Zinc
Measurements
Description
1/4"-20 x 0.203”
Thin, Type NTE
Measurements
Description
5/16"-18 x 1/2" x 1/4"
1/2"-13
7/16"-20 x 0.453”
Lock, Serrated
Standard
Pack Qty.
75
assorted loCK nuts (u.s.)
Table 11-100: Fasteners - Assorted Lock Nuts (U.S.)
Thread
Standard
UNC
UNF
UNC
Part No.
HWC00148
HWC00001
HWC02292
Material/
Finish
Zinc
Cadmium
Zinc
Thin, Type NE
Standard
Pack Qty.
100
15
50
FASTENERS
nylon loCK hex nuts (MetriC)
Table 11-101: Fasteners - Nuts - Hex Nylon Lock Nut (Metric)
Thread
Standard
ISO
ISO
ISO
ISO
ISO
Part No.
HWC01141
HWC04908
HWC04940
HWC05002
HWC12440
11-80
Nuts
Measurements
Description
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
M8-1.25 x 8mm
M10-1.50 x 10T
M5-0.80 x 5mm
M6-1.00 x 6mm
M6-1.00 x 6mm
Standard
Pack Qty.
10
1
25
10
10
11
Fasteners
nylon loCK hex nuts (u.s.)
HWC02488
HWC00063
HWC00077
SubType
HWC00027
HWC00033
HWC00037
HWC00045
HWC00049
HWC00057
HWC00059
HWC00063
HWC00067
HWC00071
HWC00073
HWC00075
HWC00077
Thread
Standard
UNF
UNC
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNF
UNC
UNF
UNF
HWC00103
UNF
Hex Jam
HWC00117
UNF
Hex
HWC00121
UNF
Hex
HWC00137
HWC00141
HWC00153
HWC00169
HWC01205
UNF
UNC
UNF
UNC
UNC
Hex
Hex
Hex
HWC02488
UNF
Hex
Part No.
TRP100EN-A
Hex
Hex
Hex
Hex
Material/
Finish
Cadmium
Cadmium Zinc
Cadmium Zinc
Cadmium Yellow
Cadmium
Cadmium / Zinc
Zinc
Zinc
Cadmium
Cadmium Yellow
Steel / Plain
Plain
Cadmium
Measurements
3/4"-10 x 0.875"
5/16"-18 x 0.344”
5/16"-24 x 0.344”
1/2"-20 x 0.594”
9/16"-18 x 0.641"
3/4"-16 x 0.875"
1"-14 x 1.047”
3/4"-16 x 0.406”
3/4"-16 x 0.875”
7/8"-14 x 0.984”
3/4"-10 x 0.875"
1-1/8"-12 x 1.172”
1-1/4"-12 x 1.391”
Description
Thick, Type NE
Thin, Type NE
Thin, Type NE
Thin, Type NE
Thick, Type NE
Thick, Type NE
Thin, Type NE
Thin, Type NTE
Thin, Type NE
Thin, Type NE
Thick, Type NE
Thin, Type NE
Thin
Thick, High
Cadmium
1-3/8"-12 x 1.578"
Tensile
High Carbon,
Zinc / Yellow
3/8"-24 x 0.453”
High Tensile
Thick, High
Cadmium
7/16"-20 x 0.453"
Tensile
Steel / Plain
1/2"-20 x 0.594"
N1610, Thick
Cadmium
1/4"-20 x 0.313” Thin, Type NE
Cadmium
1"-14 x 1.047”
N1260
Zinc / Steel
3/8"-16 x 0.453"
Thick
Cadmium Yellow 3/8"-16 x 0.453"
High Tensile
Proprietary
Zinc
1/2"-20 x 0.812”
Grade, N1260
Standard
Pack Qty.
10
50
50
25
25
10
4
10
10
10
10
4
2
1
5
4
4
100
2
50
10
4
Nuts
11-81
FASTENERS
Table 11-102: Fasteners - Nuts - Hex Nylon Lock Nut (U.S.)
Fasteners
11
SubType
HWC04183
HWC04185
Thread
Standard
UNC
UNC
Measurements
Description
Hex
Material/
Finish
Cadmium
Cadmium
#6-32 x 0.178"
3/8"-16 x 0.453
UNF
Hex
Cadmium
5/16"-24 x 0.250”
HWC04830
HWC04839
HWC04846
HWC04848
HWC04890
HWC04894
HWC04900
HWC04902
HWC04934
HWC06143
UNC
UNC
UNF
UNF
UNC
UNF
UNC
UNC
UNC
UNC
Hex
Cadmium
Zinc
Cadmium
Cadmium
Cadmium
Cadmium
Cadmium
Brass
Cadmium Zinc
Zinc
1/2"-13 x 0.594”
1/2"-13
#10-32 x 0.239”
#10-32 x 0.172"
#12-24 x 0.313"
3/8"-24 x 0.453”
5/8"-11 x 0.750”
5/16"-24 x 0.344"
#8-32 x 0.229”
#10-24 x 0.239”
HWC06591
UNC
Hex
Cadmium
1/4"-20 x 0.296”
HWC06846
HWC06861
HWC06864
UNC
UNC
UNC
Hex
Cadmium
Stainless Steel
Stainless Steel
7/16"-14 x 0.453"
#8-32 x 0.229”
1/4"-20 x 0.313”
Cadmium Yellow
1"-14 x 1.047"
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Zinc
Cadmium
Cadmium
Nylon
Stainless Steel
Stainless Steel
Cadmium
Zinc / Yellow
Zinc / Yellow
Stainless Steel
5/16"-18 x 0.344”
#10-24 x 0.239”
1/4"-20 x 0.313”
#10-24 x 0.239”
1/2"-20 x 0.313”
#6-32 x 0.125"
1"-14 x 0.890"
1/2"-13 x 0.328"
3/8"-16 x 0.453”
1/2"-13 x 0.594”
#10-24 x 0.239"
1-1/4"-12 x 2.031"
1"-12 x 1.047”
#8-32
Type NM
Type NE
Type NT,
Proprietary Grade
Type NE
Thin, Locking
Thin, Type NM
Type NTM
Type NM
Thin, Type NE
Thin, Type NE
Thick
Thin, Type NM
Thin, Type NM
Type NTU,
Proprietary Grade
Type NE
Thin, Type NM
Thin, Type NE
Thick, High
Tensile
Thin, Type NE
Thin, Type NM
Thin, Type NE
Thin, Type NM
Thin
Type NTM
Thick, Type NE
Thick NTE
Type NE
Thin
Type NM
Thick NNY1260
N1610
Type NM
HWC04820
Part No.
Hex
FASTENERS
HWC06870
UNC
UNC
UNC
UNC
UNF
UNC
HWC06884
HWC06912
HWC06924
HWC06926
HWC06958
HWC07044
HWC07045
HWC07074
HWC10708
HWC10712
HWC12430
HWU05519
HWU05704
HWU10667
11-82
UNC
UNC
UNC
UNC
UNF
UNF
UNC
Nuts
Hex
Hex
Hex
Standard
Pack Qty.
75
50
50
15
1
75
25
50
25
25
50
75
100
25
75
25
25
2
15
75
50
25
10
10
5
50
100
100
100
1
25
100
11
Fasteners
Part No.
HWU10693
HWU10706
Thread
Standard
UNC
UNC
SubType
Hex
Hex
Material/
Finish
Stainless Steel
Stainless Steel
Measurements
Description
1/4"-20
5/16"-18
Type NE
Type NE
Material/
Finish
Measurements
Standard
Pack Qty.
100
100
speCialty nuts (MetriC)
Table 11-103: Fasteners - Specialty Nuts (Metric)
SubType
HWC00036
ISO
Clip
HWC00401
ISO
Clip
HWC01219
ISO
Acorn
HWC04834
ISO
Acorn
HWC04858
ISO
Acorn
HWC04946
HWC05010
HWC06485
ISO
ISO
ISO
Specialty
Weld
Acorn
HWC06549
ISO
Clip
HWC06979
ISO
Clip
HWC07034
HWC07195
HWC09324
HWC09395
ISO
ISO
ISO
ISO
Acorn
Clip
Wing
Weld
TRP100EN-A
Standard
Pack Qty.
Description
U-Nut, Short,
Tinnerman
Cadmium
M10-1.5
U-Nut, Palnut®
Acorn Nut, Self
Stainless Steel
M6-1.00
Lock
Nylon / Black
M8-1.25 x 7.50mm
Cap Nut
Acorn Nut, Self
Stainless Steel
M10
Lock
Cadmium
M6 x 1
Self-Retaining
Plain
M8 x 1.25
Weld Nut
Nylon / Black
M5-0.8
Acorn Nut
Type U Speed
Steel / Black
M6-1.00
Nut, Short
Type U Speed
Steel / Black M6-1.00 x 4.0-6.5mm
Nut, Long
Stainless Steel
M6-1.00 x 12
Acorn Nut
Steel / Zinc
M8
U-Nut
Zinc
M10 x 50
Wing Nut
Plain
M10-1.5 x 12.05mm Weld Hex Nut
Plain
M8-1.25
Nuts
25
5
2
10
4
10
10
20
4
1
4
6
10
25
11-83
FASTENERS
Thread
Standard
Part No.
Fasteners
11
speCialty nuts (u.s.)
HWC07100
HWC07146
HWC07117
HWC02418
Table 11-104: Fasteners - Specialty Nuts (U.S.)
Part No.
HWC02294
Thread
Standard
UNF
HWC01483
SubType
Material/
Finish
Lock
Measurements Description
7/16"-20
Specialty
Zinc / Black
15/32"
HWC02418
UNC
Wing
Zinc
3/8"-16
HWC02452
UNF
Clip
Steel / Black
#10-32
Clip
Steel / Olive Drab
#10, 0.031
Clip
Steel / Black
1/4"-20
HWC04760
Clip
Steel / Black with
Phosphate and
Oil
#8
HWC04824
Clip
Black
5/16"
Anchor
Specialty
Zinc
Steel
#10-32
3/4"-16 x 0.200”
Specialty
Zinc / Black
15/32"-32 x 0.175”
1/4"-20
HWC03010
UNC
HWC03012
FASTENERS
UNF
UNF
HWC04862
HWC04892
HWC06039
HWC06189
UNC
Clip
Steel / Black
HWC06830
UNC
Clip
Steel / Black
HWC06975
HWC07004
HWC07032
UNC
UNC
UNC
Wing
Acorn
Acorn
Zinc
Stainless Steel
Stainless Steel
HWC07090
UNC
Clip
Steel / Black
HWC07092
UNC
Clip
Steel / Black
11-84
Nuts
5/16"-18 x 0.050.20”
3/8"-16
3/8"-16 x 0.620”
1/4"-20 x 0.470”
#10-24 x 0.100.12”
#10-24 x 0.120.13”
Locknut, Stover
Face Nut,
Switch, 6-Point
Wing Nut,
ESNA
Clip Nut
Tinnerman
Speed Nut
Self-Retained
Speed Nut
U-Nut, Self
Retaining
Speed Nut,
Push-On Cap
Anchor
Switch, Round
Slotted
C30110-142024
Type U Speed
Nut
Wing Nut
Acorn Nut
Acorn Nut
Type U Speed
Nut
Type U Speed
Nut
Standard
Pack Qty.
25
50
10
25
50
4
10
10
1
1
4
10
25
25
5
25
10
10
Fasteners
Thread
Standard
SubType
Material/
Finish
HWC07100
UNC
Clip
Steel / Black
HWC07106
UNC
Clip
Steel / Black
HWC07108
UNF
Clip
Steel / Black
HWC07115
UNC
Weld
Plain
HWC07117
UNF
HWC07120
HWC07135
UNC
UNC
Part No.
HWC07146
Steel / Nylon
Wing
Acorn
Nylon
Stainless Steel
Clip
Steel
HWC07156
UNC
Clip
Steel / Black
HWC07738
UNC
Clip
Steel / Black
HWC07766
UNC
Clip
Steel / Black
HWC07778
UNC
Clip
Steel / Black
TRP100EN-A
Measurements Description
Standard
Pack Qty.
1/4"-20 x 0.030.15”
1/4"-20 x 0.050.08”
#10-32 x 0.050.07”
Type U Speed
Nut
Type U Speed
Nut
Type U Speed
Nut
Weld Nut, 4
1/4"-20 x 9/32”
Projection
Steering Wheel
3/4"-16 x 1-1/2" Nut with Lock
Patch
1/4"-20
Self-Locking
1/2"-13 x 13/16"
Acorn Nut
Speed, Trim
3/16"
Plate
Retainer Nut,
#10-24
Speed Grip
#10-24
Speed Nut
3/8"-16 x 0.05- Type U Speed
0.20”
Nut
#10-24
U-Nut
25
10
5
100
1
4
100
10
15
10
5
10
Nuts
11-85
FASTENERS
11
Fasteners
11
PINS
speCial pins (MetriC)
Table 11-105: Fasteners - Special Pins (Metric)
Part No.
HWC04221
Description
M3 Roll Pin
Standard Pack Qty.
25
speCial pins (u.s.)
Table 11-106: Fasteners - Special Pins (U.S.)
FASTENERS
Part No.
HWC02672
HWC06951
HWC07140
HWC14950
11-86
Description
3/16" x 1/2" x 0.042", Spring, Stainless Steel
1/2" x 6", Pin Fuel Tank Strap to Bracket, Olive Drab
3/32" x 3/4" x 0.022", Spring, Stainless Steel
1/8" x 0.250" x 1.188", Hitch, with Safety Clip, Zinc
Pins
Standard Pack Qty.
25
1
25
25
11
Fasteners
RIVETS
assorted rivets
Table 11-107: Fasteners - Rivets - Assorted
Part No.
HWC04601
HWC04605
HWC05050
Description
3/16" x 5/16", Aluminum, Anodized Yellow
3/16" x 5/16", T4 (Hard) Aluminum
3/16" x 5/16"
Standard Pack Qty.
25
15
10
Blind rivets
Table 11-108: Fasteners - Rivets - Blind
HWC09241
HWC04065
HWC04265
HWC04999
HWC05053
HWC05054
HWC05056
HWC05057
HWC05059
HWC05074
HWC07230
HWC07242
HWC12005
TRP100EN-A
Description
1/4" x 3/8", Magna-Lok, Stainless Steel Rivet Assembly with Plastic
Sleeve
3/16" x 3/8"
3/16" x 1/4", 0.450" Grip Length
1/8" x 1/4", 0.400" Grip Length
3/16", Steel/Steel, Zinc
3/16" x 0.625", Aluminum/Steel
1/8" x 3/16"
1/8" x 1/4", 0.425" Grip Length
1/8" x 3/16", Black
3/16" x 1/8", Aluminum
5/32", Aluminum, Protruding
3/16", 0.500-0.875" Grip Ring
1/8" x 0.250", Countersunk, Aluminum
Standard Pack Qty.
15
FASTENERS
Part No.
2
50
4
10
25
10
10
1000
10
25
4
100
Rivets
11-87
Fasteners
11
Blind Brazier rivets
Table 11-109: Fasteners - Rivets - Blind
Part No.
HWC05062
Description
3/16" x 5/8"
Standard Pack Qty.
10
Blind BreaK Mandrel rivets
Table 11-110: Fasteners - Rivets - Blind - Break Mandrel
Part No.
HWC04770
HWC04774
HWC05070
HWC10949
Description
3/16" x 0.500", Aluminum / Black
3/16" x 14.6, Aluminum
3/16"
3/16", 6-6, Aluminum
Standard Pack Qty.
25
10
75
5
FASTENERS
Blind doMe rivets
Table 11-111: Fasteners - Rivets - Blind - Dome
Part No.
HWC01237
HWC02726
HWC02730
HWC04237
HWC05058
HWC07182
HWC07188
HWC07220
HWC07222
HWC07224
HWC07232
11-88
Description
3/16" x 3/8"
1/8", 0.37" x 0.500" Grip, Aluminum
3/16" x 0.500", Aluminum
3/16" x 0.250", Aluminum/Steel - Black
3/16" x 0.250", Aluminum/Steel - Plain
3/16" x 0.250", Stainless Steel, Protruding
5/32", Aluminum/Steel
1/8", Aluminum/Steel
3/16", Aluminum/Steel
3/16" x 0.438-0.750", Aluminum
3/16", Aluminum
Rivets
Standard Pack Qty.
10
100
75
15
25
10
5
50
50
4
25
11
Fasteners
Blind larGe FlanGe rivets
Table 11-112: Fasteners - Rivets - Blind - Large Flange
Part No.
HWC02706
HWC06832
HWC07073
HWC07186
HWC07236
Description
3/16" x 0.250", Aluminum
3/16" x 1.00", Aluminum/Steel, Heavy Duty
3/16" x 0.781", Aluminum/Steel, Heavy Duty
1/8", Aluminum/Steel
1/8", Aluminum
Standard Pack Qty.
50
25
50
25
25
Blind larGe FlanGe doMe rivets
Table 11-113: Fasteners - Rivets - Bind - Large Flange Dome
Description
3/16" x 0.438-0.750", 12.7 mm - 19.8 mm Grip Ring, Aluminum Body, Steel
HWC06464
Phosphate Madrel
Standard Pack Qty.
25
FASTENERS
Part No.
Blind Mandrel rivets
Table 11-114: Fasteners - Rivets - Bind - Mandrel
Part No.
HWC05072 5/32" x 0.500", Aluminum
Description
Standard Pack Qty.
10
Blind universal Monel rivets
Table 11-115: Fasteners - Rivets - Bind - Universal Monel
Part No.
HWC07184 5/32", Monel
TRP100EN-A
Description
Standard Pack Qty.
4
Rivets
11-89
Fasteners
11
hiGh strenGth doMe rivets
Table 11-116: Fasteners - Rivets - High Strength - Dome
Part No.
HWC02168
HWC02169
HWC02171
HWC02728
HWC03421
HWC06163
Description
1/4" x 0.625", Maglock Fastener, Steel
1/4" x 0.625", Extended Magnagrip, Blind Fastener, Steel
3/16" x 0.270", Magna-Lok, Steel
1/4" x 0.375", Pop, Steel
3/16" x 0.437", Extended Grip, Aluminum
1/4" x 0.375", Magna-Lok, MGLP U8-6, Burnished Stainless Steel
Standard Pack Qty.
50
40
25
25
10
10
hiGh strenGth huCK rivets
Table 11-117: Fasteners - Rivets - High Strength - Huck
FASTENERS
Part No.
HWC00900
HWC01846
HWC02152
HWC02162
HWC02213
HWC06309
HWC07133
HWC07218
HWC07234
HWC12030
Description
3/16" x 0.062-0.270" Grip, Aluminum
1/4" x 0.125" x 0.313", Break Mandrel, Zinc
1/4" x 0.080-0.375", Aluminum
1/4" x 3/8", Blind, Magna-Lok, Stainless Steel
3/16" x 0.189", Magna, Bulb, Steel
1/4" x 3/8", Blind, Magna-Lok, Aluminum
1/4", Huck-Lok, Steel
1/4" x 0.346", Zinc
1/4" x 0.268", Zinc
1/4" x 0.080-0.375", Steel, Clear Coating
Standard Pack Qty.
50
25
25
10
25
15
10
15
10
25
huCK rivets
Table 11-118: Fasteners - Rivets - Huck
Part No.
Description
HWC06185 1/4" Steel, Structural, Zinc
11-90
Rivets
Standard Pack Qty.
50
11
Fasteners
Multi-Grip doMe rivets
Table 11-119: Fasteners - Rivets - Multi-Grip - Dome
Part No.
Description
HWC07226 3/16" x 0.188-0.375", Aluminum
Standard Pack Qty.
50
Multi-Grip larGe FlanGe rivets
Table 11-120: Fasteners - Rivets - Multi-Grip - Large Flange
Part No.
Description
HWC07238 3/16" x 0.251-0.500", Aluminum/Steel
Standard Pack Qty.
2
Table 11-121: Fasteners - Rivets - Solid - Brazier
Part No.
HWC02702
HWC05060
HWC07190
HWC07212
HWC07214
HWC12015
Description
3/16" x 3/8", Aluminum
3/16" x 3/8"
3/16" x 0.500", Aluminum
3/16" x 0.625", Aluminum
3/16" x 5/8", Aluminum
3/16" x 1/2", Aluminum
Standard Pack Qty.
5
25
75
25
50
25
speCial drive, Brazier rivets (u.s.)
Table 11-122: Fasteners - Rivets - Special - Drive, Brazier (U.S.)
Part No.
Description
HWC07194 3/16" x 0.344", Aluminum, (38-206-06-13)
HWC07196 3/16" x 0.406", Aluminum, (38-206-08-13)
HWC07198 3/16" x 0.469", Aluminum, (38-206-12-13)
TRP100EN-A
Standard Pack Qty.
10
5
5
Rivets
11-91
FASTENERS
solid Brazier rivets
Fasteners
11
speCial national rivets (u.s.)
Table 11-123: Fasteners - Rivets - Special - National Rivet (U.S.)
Part No.
Description
HWC07178 14-8, National Rivet, Brass, Split
Standard Pack Qty.
50
speCial nylon rivets (MetriC)
Table 11-124: Fasteners - Rivets - Special - Nylon (Metric)
Part No.
Description
HWC01273 19.1mm x 8.7mm (8.7mm - 12.7mm), White Nylon
HWC11510 19.1mm x 5.7mm (5.9mm - 7.3mm), Gray Nylon
Standard Pack Qty.
25
10
FASTENERS
speCial reMovaBle rivets (u.s.)
Table 11-125: Fasteners - Rivets - Special - Removable (U.S.)
Part No.
Description
HWC00226 0.335" x 0.169-0.244", Removable
Standard Pack Qty.
5
speCial shaveaBle, Braziere rivets (u.s.)
Table 11-126: Fasteners - Rivets - Special - Shaveable, Brazier (U.S.)
Part No.
Description
HWC00026 3/16" x 0.375", Shaveable, with Washer, Aluminum
11-92
Rivets
Standard Pack Qty.
10
11
Fasteners
speCial tri Fold rivets (u.s.)
Table 11-127: Fasteners - Rivets - Special - Tri Fold (U.S.)
Part No.
Description
HWC05068 1/4" x 1/2", Dome, Mandrel, Aluminum
HWC10936 1/4" x 5/8", Aluminum, RV6606-8-10
Standard Pack Qty.
10
10
speCial tuFFlex rivets (u.s.)
Table 11-128: Fasteners - Rivets - Special - Tufflex (U.S.)
Standard Pack Qty.
4
universal rivets
Table 11-129: Fasteners - Rivets - Universal
Part No.
Description
HWC02698 3/16" x 1/2", Heavy Duty
HWC05044 3/32" x 1/4", Aluminum, (AN470AD3-4)
Standard Pack Qty.
50
10
speCial seMi tuBular rivets (u.s.)
Table 11-130: Fasteners - Rivets - Special - Semi Tubular (U.S.)
Part No.
HWC02734
HWC02736
HWC02738
HWC02742
TRP100EN-A
Description
1/4" x 5/8", Brass Plated Steel
1/4" x 1/2", Brass Plated Steel
1/4" x 9/16", Brass Plated Steel
1/8" x 0.225", Brass
Standard Pack Qty.
50
25
75
25
Rivets
11-93
FASTENERS
Part No.
Description
HWC06718 0.228-0.238", Screw-Type, Black Plastic
Fasteners
11
SCREWS
sCrew Caps (interior sCrews)
Table 11-131: Fasteners - Screw Caps (Interior Screws)
FASTENERS
Part No.
HWC01083
HWC01051
HWC01053
HWC01055
HWC04671
HWC06049
HWC06051
HWC06480
HWC06482
HWC06484
HWC06727
HWC07703
Description
Standard Pack Qty.
25
10
25
25
25
25
25
25
25
25
10
25
3/16” Snap Cap, Dome
3/16” Snap Cap, Dome Dark Grey
3/16” Snap Cap, Dome Red
3/16” Snap Cap, Dome, Blue
3/16” Snap Cap, Dome, Grey
3/16” Snap Cap, Dome, Light Gray
3/16” Snap Cap, Dome, Green
3/16” Snap Cap, Dome, Blue
3/16” Snap Cap, Dome Red
3/16” Snap Cap, Dome Taupe
3/16” Snap Cap, Dome, Taupe
3/16” Snap Cap, Dome, Black
sCrew Caps (interior lininG sCrews)
Table 11-132: Fasteners - Screw Caps (Interior Lining Screws)
Part No.
HWC04333
HWC07055
Description
Lining Fastener with colored head - Black
Heavy Duty Lining Fastener with colored head - Black
Standard Pack Qty.
25
50
asseMBly sCrews (u.s.)
Table 11-133: Fasteners - Screws - Assembly (U.S.)
Part No.
Description
5/16” x 1/2”, Washer Assembly with Nylon
HWC01062
Patch, Indented Hex Head, Zinc
11-94
Screws
Thread Standard
Head
Standard Pack Qty.
n/a
Hex
5
11
Fasteners
assorted sCrews (u.s.)
Table 11-134: Fasteners - Screws - Assorted (U.S.)
Part No.
HWC02844
HWC07672
HWC07173
HWC04784
HWC06173
Description
Thread Standard
#8-18” x 3/4”, Recess
n/a
®
n/a
#6-19” x 5/8”, Plastite , Cadmium Zinc
3/8”-16 x 1” 1/2”, Shoulder, Grade 12.9, Zinc
UNC
#8-32 x 3/4”, Snap-On, Case Hardened, Zinc
UNC
®
n/a
#10-16” x 3/8”, Plastite , Zinc Black
Head
Oval
Pan
Shoulder
n/a
Pan
Standard Pack Qty.
75
50
2
10
50
MaChine sCrews (u.s.)
Part No.
HWC06074
HWC00022
HWC00217
HWC01015
HWC02804
HWC02812
HWC02817
HWC02818
HWC02828
HWC02830
HWC02848
HWC02926
HWC02928
HWC02944
HWC02974
HWC04093
HWC04611
HWC04647
HWC06243
HWC06245
HWC06247
TRP100EN-A
Thread
Standard
1/2”-13 x 3”, Slotted
UNC
#10-24 x 1”, Snap-On, Case Hardened
UNC
#8-32 x 3/4”, Case Hardened, Stainless Steel
UNC
#6-32 x 1”, Cadmium Zinc, Slotted
UNC
1/4”-20 x 2”, Cadmium Zinc, Slotted
UNC
1/4”-20 x 3/4”, Stainless Steel, Slotted
UNC
#10-32 x 7/8”, Cadmium Zinc
UNF
#10-32 x 1/2”, Cadmium Zinc
UNF
#10-32 x 3/4”, Phosphate
UNF
#10-32 x 3/4”, Zinc
UNF
1/4”-20 x 1-1/2”, Stainless Steel, Slotted
UNC
1/4”-20 x 1-3/4”, Stainless Steel, Slotted
UNC
1/4”-20 x 2”, Stainless Steel, Slotted
UNC
#8-32 x 1/2”, Cadmium Zinc
UNC
5/16”-18 x 5/8”, Selflocking, Zinc w/ Nylon Patch, Slotted
UNC
5/16”-18 x 1-1/4”, Tensile Lock
UNC
5/16”-18 x 1-1/2”, with Serrations, Grade 5, Zinc Yellow
UNC
5/16”-18 x 2”, Stainless Steel, Slotted
UNC
#10-32 x 1”, Zinc Black
UNF
#8-32 x 1”, Zinc Black
UNC
#8-32 x 1-1/4”, Zinc Black
UNC
Description
Head
Flat Countersunk
Phillips - Square
Pan
Pan
Flat Countersunk
Oval Countersunk
Pan
Pan
Pan
Truss
Round
Truss
Truss
Flat Countersunk
n/a
n/a
Hex
Truss
Pan
Pan
Pan
Standard
Pack Qty.
25
50
50
100
75
4
50
50
50
25
25
5
5
4
10
50
20
5
10
10
50
Screws
11-95
FASTENERS
Table 11-135: Fasteners - Screws - Machine (U.S.)
Fasteners
11
Part No.
FASTENERS
HWC06441
HWC06599
HWC06637
HWC07103
HWC07113
HWC07217
HWC07332
HWC07336
HWC07342
HWC07344
HWC07350
HWC07384
HWC07394
HWC07412
HWC07414
HWC07422
HWC07426
HWC07428
HWC07432
HWC07450
HWC07452
HWC07462
HWC07470
HWC07488
HWC07494
HWC07508
HWC07512
HWC07514
HWC07516
HWC07518
HWC07524
HWC07528
HWC07532
HWC07534
HWC07536
11-96
Description
#10-32 x 1-1/4”, Zinc
1/4”-28 x 5/8”, Zinc Black
#10-24 x 1-1/2”, Zinc, Slotted
#10-32 x 1”, Zinc
#10-24 x 2”, Zinc
1/4”-14 x 3/4”
#10-24 x 1”, Washer, Zinc
#6-32 x 1-1/2”, Cadmium Zinc
1/4”-20 x 1”, Zinc
1/4”-20 x 1-1/4”, Zinc
5/16”-18 x 1”, Zinc
1/4”-20 x 1”, Zinc Black
#10-24 x 1/2”, Polished Stainless Steel
#10-24 x 1/2”, Zinc, Slotted
#10-24 x 1/2”, Zinc
#10-24 x 3/4”, Zinc
#10-24 x 5/8”, Zinc
#10-24 x 2”, Zinc
#10-24 x 5/8”, Polished Stainless Steel
#6-32 x 1”, Zinc, Slotted
#6-32 x 3/4”, Cadmium Zinc
#8-32 x 3/4”, Stainless Steel
#8-32 x 1/2”, Zinc
1/4”-20 x 1/2”, Stainless Steel
1/4”-20 x 1-1/4”, Stainless Steel
1/4”-20 x 3/4”, Grade 5, Zinc
1/4”-20 x 1”, Stainless Steel
1/4”-20 x 1”, Zinc
1/4”-20 x 1”, Chrome
1/4”-20 x 3/4”, Zinc
1/4”-20 x 3/4”, Zinc
1/4”-20 x 3/8”, Polished Chrome
1/4”-20 x 1-1/2”, Stainless Steel
1/4”-20 x 5/8”, Stainless Steel
1/4”-20 x 7/8”, Polished Stainless Steel
Screws
Thread
Standard
UNF
UNF
UNC
UNF
UNC
n/a
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Head
Flat Countersunk
Oval Countersunk
Round
Truss
Pan
Pan
Oval Countersunk
Pan
Truss
Flat Countersunk
Flat Countersunk
Truss
Truss
Round
Truss
Truss
Truss
Flat Countersunk
Truss
Round
Pan
Pan
Pan
Oval Countersunk
Oval Countersunk
Flat Countersunk
Oval Countersunk
Flat Countersunk
Truss
Flat Countersunk
Truss
Truss
Oval Countersunk
Pan
Oval Countersunk
Standard
Pack Qty.
50
25
50
100
100
10
10
125
100
25
15
100
4
25
25
25
50
50
5
75
25
25
125
10
10
25
25
25
25
125
125
50
50
5
10
Part No.
HWC07544
HWC07556
HWC07596
HWC07654
HWC07696
HWC07699
HWC07708
HWC09004
HWC09031
HWC09243
HWC09289
HWC09292
HWC09321
HWC11135
HWU11032
HWU11107
HWU11120
HWU11129
HWU11131
HWU11133
HWU11137
HWU11146
HWU11159
HWU11172
HWU11185
HWU11198
HWU11211
HWU11224
TRP100EN-A
Fasteners
Description
1/4”-20 x 5/8”, Stainless Steel
#10-24 x 1”, Zinc
5/16”-18 x 3/4”, Zinc
1/4”-20 x 1-1/4”, Zinc Black
1/4”-20 x 7/8”, Stainless Steel
1/4”-20 x 1-1/8, Stainless Steel
1/4”-20 x 1”, Locking Thread
#10-32 x 3/4”, Zinc
#10-32 x 1/2”, Black
#8-32 x 2”, Zinc Black, Slotted
#13-19 x 7/16”, HiLo® Thread
#10-16 x 1”, HiLo® Thread
#10-24 x 1/2”, with Nylon Patch, Zinc
1/4”-20 x 1”, Stainless Steel
#6-32 x 1”, Zinc, Slotted
#8-32 x 1, Zinc
#10-24 x 1/2”, Zinc
#10-24 x 1”, Stainless Steel
#10-24 x 1-1/2”, Stainless Steel
#10-24 x 3/4”, Zinc
1/4”-20 x 1-1/2”, Stainless Steel
#10-24 x 1”, Zinc
#10-32 x 1/2”, Zinc
#10-32 x 3/4”, Zinc
#10-32 x 1”, Zinc
#10-32 x 1-1/2”, Zinc
1/4”-20 x 1/2”, Zinc
1/4”-20 x 3/4”, Zinc
Thread
Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNC
n/a
n/a
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNF
UNF
UNF
UNF
UNC
UNC
Head
Pan
Flat Countersunk
Flat Countersunk
Truss
Oval Countersunk
Oval Countersunk
Flat Countersunk
Pan
Truss
n/a
Phillips - Square
Phillips - Square
Phillips - Square
Pan
Round
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Standard
Pack Qty.
5
100
25
25
10
25
50
50
75
250
10
10
25
50
100
50
50
50
50
50
50
50
100
50
50
50
100
100
Screws
11-97
FASTENERS
11
Fasteners
11
MaChine phillips sCrews (MetriC)
Table 11-136: Fasteners - Screws - Machine Phillips (Metric)
Part No.
HWC03101
HWC03103
Description
M6-1.00 x 25, Zinc Black
M5-0.80 x 10, Zinc Black
Thread Standard
n/a
n/a
Head
Pan
Pan
Standard Pack Qty.
50
50
MaChine pozidrive sCrews (u.s.)
Table 11-137: Fasteners - Screws - Machine Pozidrive (U.S.)
Part No.
HWC00326
HWC07376
HWC07468
HWC07478
HWC07554
HWC07652
Description
#10-32 x 2-1/4”, Zinc Black
#10-32 x 1/2”, Zinc Black
#8-32 x 1”, Zinc Black
#8-32 x 3/8”, Zinc Black
#10-32 x 5/8”, Zinc Black
#10-32 x 5/8”, Zinc
Thread Standard
UNF
UNF
UNC
UNC
UNF
UNF
Head
Pan
Pan
Pan
Pan
Pan
Pan
Standard Pack Qty.
2
125
100
25
25
125
FASTENERS
MaChine square phillips sCrews (MetriC)
Table 11-138: Fasteners - Screws - Machine Square Phillips (Metric)
Part No.
HWC09002
HWC07187
HWC08023
HWC08028
HWC09001
HWC09005
HWC09006
HWC09007
HWC09008
HWC09012
HWC09014
11-98
Description
M6-1.00 x 16, Zinc
M5-0.80 x 25
M5-0.80 x 20, with Nylon Washer, Zinc Black
M5-0.80 x 20, Zinc Black
M5-0.80 x 20, Washer, with Nylon Patch
M4-0.70 x 25, Zinc Black
M4-0.70 x 10, Zinc Black
M4-0.70 x 16, Zinc Black
M4-0.70 x 30, Zinc Black
M5-0.80 x 12, Zinc Black
M5-0.80 x 16, Zinc Black
Screws
Thread Standard
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Head
Flat
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Standard Pack Qty.
4
4
50
125
10
50
75
75
50
75
75
11
Part No.
HWC09016
HWC09019
HWC09020
HWC09022
HWC09023
HWC09025
HWC09033
HWC09038
HWC09044
HWC09047
HWC09050
HWC09053
HWC09054
HWC09056
HWC09057
HWC09112
Description
M5-0.80 x 20, Zinc
M5-0.80 x 35, Zinc
M6-1.00 x 8, Zinc Black
M6-1.00 x 16, Zinc Black
M6-1.00 x 16
M6-1.00 x 25, SL, Zinc Black
M4-0.70 x 16, Zinc Black
M5-0.80 x 16, Washer, Stainless Steel
M5-0.80 x 20, Stainless Steel
M5-0.80 x 16, Stainless Steel
M5-0.80 x 30, Stainless Steel
M6-1.00 x 25, SL, Stainless Steel
M6-1.00 x 40, Stainless Steel
M6-1.00 x 60, Stainless Steel
M6-1.00 x 25, Stainless Steel
M6-1.00 x 25, Stainless Steel
M5-0.80 x 25, Washer, with Nylon Patch,
Zinc Black
Thread Standard
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Head
Pan
Pan
Pan
Pan
Pan
Pan
Oval
Pan
Pan
Pan
Pan
Pan
Pan
Oval
Oval
Pan
Standard Pack Qty.
75
50
5
50
50
25
75
25
25
50
10
25
4
2
10
10
n/a
Pan
25
Thread Standard
n/a
n/a
n/a
n/a
Head
Oval
Pan
Pan
Oval
Standard Pack Qty.
125
125
15
15
n/a
Pan
25
n/a
n/a
Pan
Flat
10
25
n/a
Button
10
n/a
Pan
10
FASTENERS
HWC09115
Fasteners
MaChine torx sCrews (MetriC)
Table 11-139: Fasteners - Screws - Machine Torx (Metric)
Part No.
HWC00957
HWC00958
HWC01109
HWC01183
Description
M4-0.70 x 8, T20, Grade 4.8
M3-0.50 x 8, T20, Zinc
M5-0.80 x 25, T25, Stainless Steel
M5-0.80 x 20, T25, Stainless Steel
M5-0.80 x 12, T20, with Nylon Patch, Zinc
HWC01231
Black
HWC01235 M5-0.80 x 20, T25, Zinc Black
HWC01317 M4-0.70 x 8, T20, Grade 4.8
M8-1.25 x 25, T40, Machined Button Screw,
HWC04061
Stainless Steel
HWC04227 M5-0.80 x 30, T25, Stainless Steel
TRP100EN-A
Screws
11-99
Fasteners
Part No.
HWC04235
HWC04496
HWC04683
HWC04695
HWC04721
HWC04733
11
HWC05222
HWC05226
HWC05230
HWC05236
HWC05246
HWC05250
HWC05252
HWC05262
HWC05264
Description
M4-0.70 x 16, T20
M6-1.00 x 45, T30, Stainless Steel
M6-1.00 x 25, T30
M5-0.80 x 50, T20, Zinc Black
M5-0.80 x 50, T20, Phosphate Oil
M6-1.00 x 40, T30, Stainless Steel
M5-0.80 x 40, T20, with Nylon Patch, Zinc
Black
M5-0.80 x 25, T25, Zinc Black
M5-0.80 x 12, T20, Zinc Black
M6-1.00 x 20, T30, Zinc Black
M5-0.80 x 12, T25, Cadmium
M8-1.25 x 20, T40, Stainless Steel
M10-1.50 x 35, T50, Stainless Steel
M10-1.50 x 40, T50, Stainless Steel
M4-0.70 x 20, T20, Zinc Black
M5-0.80 x 10, T25, with Nylon Patch, Zinc
Black
M5-0.80 x 20, T25, Stainless Steel
M6-1.00 x 20, T30, Cadmium
M6-1.00 x 25, T30, Zinc Black
M6-1.00 x 19, T30, Stainless Steel
M6-1.00 x 20, T30, Stainless Steel
M8-1.25 x 30, T40, with Nylon Patch,
Cadmium Yellow
M5-0.80 x 30, T20, Zinc Black
M8-1.25 x 20, T40, Machined Button Screw,
Cadmium
M5-0.80 x 20, T25, with Nylon Patch, Zinc
Black
M6-1.00 x 40, T30, Zinc Black
M6-1.00 x 16, T30, Polished Stainless Steel
M6-1.00 x 25, T30, Polished Stainless Steel
M4-0.70 x 25, T20, Stainless Steel
M5-0.80 x 16, T25, Stainless Steel
M5-0.80 x 16, T25, Cadmium
M5-0.80 x 12, T25, Zinc Black
M8-1.25 x 20, T40
M5-0.80 x 20, T25, Cadmium
11-100
Screws
HWC04818
HWC05082
HWC05084
HWC05102
HWC05104
HWC05150
HWC05152
HWC05154
HWC05158
HWC05172
FASTENERS
HWC05178
HWC05180
HWC05186
HWC05190
HWC05192
HWC05200
HWC05212
HWC05218
HWC05220
Thread Standard
n/a
n/a
n/a
n/a
n/a
n/a
Head Standard Pack Qty.
Flat
10
Cylinder
4
Flat
25
Pan
25
Pan
20
Oval
4
n/a
Pan
4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Oval
Pan
Pan
Pan
Pan
Flat
Flat
Oval
25
25
25
25
5
4
4
75
n/a
Pan
50
n/a
n/a
n/a
n/a
n/a
Pan
Pan
Pan
Pan
Pan
10
25
10
10
5
n/a
Pan
4
n/a
Pan
10
n/a
Button
10
n/a
Pan
100
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
5
10
5
4
15
25
50
4
25
11
Fasteners
Part No.
Description
HWC05266 M5-0.80 x 40, T20, Zinc Black
HWC05272 M6-1.00 x 30, T30, Stainless Steel
HWC05310 M5-0.80 x 35, T20, Zinc Black
M5-0.80 x 20, T25, with Nylon Patch,
HWC05322
Stainless Steel
M8-1.25 x 30, T40, Machined Button Screw,
HWC05362
Stainless Steel
HWC06419 M6-1.00 x 20, T20, Washer, Zinc Black
HWC07144 M6-1.00 x 40, T-2
HWC07211 M8-1.25 x 30, T40, Stainless Steel
HWC12530 M4-0.70 x 12, T20, Grade 4.8
HWC12535 M5-0.80 x 10, T25, Cadmium
Thread Standard
n/a
n/a
n/a
Head
Pan
Pan
Pan
Standard Pack Qty.
5
10
50
n/a
Pan
25
n/a
Button
5
n/a
n/a
n/a
n/a
n/a
Pan
n/a
n/a
Flat
Pan
50
20
2
10
25
MaChine slotted sCrews (MetriC)
Part No.
HWC03111
HWC04345
HWC06675
HWC07087
HWC07165
HWC09330
Description
M5-0.80 x 20, Washer, Zinc Black
M10-1.50 x 30, T50, Grade 10.9, Zinc
M12-1.75 x 30, Stainless Steel
M6-1.00 x 20, Washer, Zinc Black
M6-1.00 x 40, Zinc Black
M6-1.00 x 1, Washer
Thread Standard
n/a
n/a
n/a
n/a
n/a
n/a
Head
Round
Pan
n/a
Round
Pan
Pan
Standard Pack Qty.
50
10
1
2
5
25
MaChine slotted sCrews (u.s.)
Table 11-141: Fasteners - Screws - Machine Slotted (U.S.)
Part No.
HWU11006
HWU11019
HWU11045
TRP100EN-A
Description
#6-32 x 1/2”, Zinc
#6-32 x 3/4”, Zinc
#6-32 x 1-1/2” Zinc
Thread Standard
UNC
UNC
UNC
Head
Round
Round
Round
Standard Pack Qty.
100
100
50
Screws
11-101
FASTENERS
Table 11-140: Fasteners - Screws - Machine Slotted (Metric)
Fasteners
11
selF-tappinG sCrews (MetriC)
Table 11-142: Fasteners - Screws - Self-Tapping (Metric)
Part No.
HWC09327
HWC04598
HWC05396
HWC09099
HWC09100
HWC09111
Description
M4 x 25, with Washer, Steel Grey
M8-1.25 x 35, Taptite®, Zinc Black
M6-1.00 x 15, Taptite® Cadmium
M6-1.00 x 12
M6-1.00 x 20, Taptite® Zinc Black
M6-1.00 x 8, Taptite® Zinc
Thread Standard
n/a
n/a
n/a
n/a
n/a
n/a
Head
Truss
Hex
Hex
Pan
Pan
Pan
Standard Pack Qty.
10
10
75
25
25
10
selF-tappinG sCrews (u.s.)
FASTENERS
Table 11-143: Fasteners - Screws - Self-Tapping (U.S.)
Part No.
HWU11334
HWC02862
HWC02980
HWC04207
HWC04277
HWC05092
HWC05132
HWC06102
HWC06141
HWC06175
HWC06442
HWC06447
HWC06579
HWC06723
11-102
Description
#12 x 1”, Case Hardened Tapping Hexwasher
1/4”-20 x 3/4”, Zinc
5/16”-12 x 1”, Cadmium
#6-20 x 1/2”, T15, Cadmium
#6-20 x 3/8”, T15, Cadmium
1/4”-20 x 3/4”, Tension Control Cadmium
1/4”-20 x 3/4” Thread Cutting Cadmium Tapping Hexwasher Screw
1/4”-20 x 3/4”, Taptite® Stainless Steel
1/4”-20 x 1/2”, Taptite® Zinc
#10-32 x 1”, Taptite® Zinc Black
1/4”-20 x 1”, Taptite® Polished Stainless Steel
#10-32 x 1/2”, Taptite® Zinc Black
#10-24 x 1”, Phillips-Square, Drill Point
#12 x 3/4”
Screws
Thread
Standard
n/a
UNC
n/a
n/a
n/a
UNC
Hex
Pan
Hex
Flat Countersunk
Pan
Hex
Standard
Pack Qty.
100
25
5
25
175
25
n/a
Hex
10
UNC
UNC
UNF
UNC
UNF
UNC
n/a
Hex
Hex
Hex
Hex
Hex
n/a
Hex Flange
4
100
50
5
25
50
50
Head
Part No.
HWC06823
HWC06881
HWC07149
HWC07161
HWC07163
HWC07338
HWC07392
HWC07484
HWC07498
HWC07506
HWC07540
HWC07558
HWC07622
HWC07624
HWC07625
HWC07636
HWC07688
HWC07698
HWC09068
HWC09070
HWC09075
HWC09076
HWC09098
HWC09110
HWC12581
HWU11308
HWU11320
HWU11321
HWU11347
HWU11360
HWU11386
HWU11421
TRP100EN-A
Fasteners
Description
#8 x 3/4”, Headlamp Door, Stainless Steel
#8-18 x 1”, Phillips-Square, Washer, Zinc
#8-18 x 1-1/2”, Phillips-Square, Washer, Zinc Black
#10-24 x 1-1/2”, Thread Forming, Zinc Black
#10-24 x 3/8”, Pan Head, Taptite® Black
#10-16 x 3/4”, Slotted, Zinc
#10-24 x 1”, Screw & Cap Assembly, Taupe
1/4”-20 x 1-1/2”, Taptite® Zinc
1/4”-20 x 1”, Taptite® Zinc
1/4”-20 x 3/4”
1/4”-20 x 5/8”, Taptite® Polished Stainless Steel
#10-24 x 1”, Square, Zinc Black
#10-24 x 1”, Screw & Cap Assembly, Red
#10-24 x 1”, Screw & Cap Assembly, Dark Gray
3/16”, Drill Point Assembly, Steel, Dark Grey
1/4”-20 x 5/8”, Taptite® Zinc
#10-24 x 3/4”, Zinc
1/4”-20 x 1”, Taptite® Stainless Steel
#10-16 x 3/4”, Phillips-Square, Truss, Zinc Black
#10-16 x 1”, Zinc Black
#8-18 x 3/4”, Zinc Black
#8-18 x 1”, Zinc Black
#10-24 x 1/2” Taptite® Zinc Black Pan Screw
#10-24 x 3/4” Zinc Black Screw
1/4”-20 x 3/4”, Taptite® Zinc
#8-18 x 3/4”, Case Hardened, Zinc
#10 x 3/4”, Case Hardened, Zinc
#10 x 1”, Case Hardened, Zinc
1/4” x 1”, Case Hardened, Zinc
1/4” x 2”, Case Hardened, Zinc
1/4” x 3/4”, Case Hardened, Zinc
1/4” x 1-1/2”, Slotted, Case Hardened
Thread
Head
Standard
n/a
Pan
n/a
Snap
n/a
Snap
UNC
n/a
UNC
Pan
n/a
Oval Countersunk
UNC
Truss
UNC
Hex
UNC
Hex
UNC
Hex
UNC
Hex
UNC
Pan
UNC
Truss
UNC
Truss
n/a
n/a
UNC
Hex
UNC
Truss
UNC
Hex
n/a
Truss
n/a
Truss
n/a
Oval Countersunk
n/a
Oval Countersunk
n/a
Pan
n/a
n/a
UNC
Hex
n/a
Hex
n/a
Hex
n/a
Hex
n/a
Hex
n/a
Hex
n/a
Hex
n/a
Hex
Standard
Pack Qty.
20
25
25
25
50
125
10
50
25
10
15
25
10
10
10
50
25
10
50
25
50
50
50
10
50
50
50
100
100
50
50
25
Screws
11-103
FASTENERS
11
Fasteners
11
selF-tappinG phillips sCrews (u.s.)
Table 11-144: Fasteners - Screws - Self-Tapping Phillips (U.S.)
Part No.
HWC07436
HWC02824
HWC02838
HWC03105
HWC06149
HWC06209
HWC07346
HWC07358
HWC07364
HWC07366
HWC07378
HWC07398
HWC07404
HWC07406
HWC07408
HWC07410
HWC07420
HWC07424
HWC07430
HWC07434
HWC07438
HWC07440
HWC07444
HWC07446
Description
#10-12 x 1”, Binding Head, Zinc
#10-32 x 1/2”, Cadmium Zinc
#10-12 x 3/4”, Zinc Black
#10-16 x 1-1/2”, Stainless Steel
#10-16 x 7/8”
#10-24 x 1” Taptite® Zinc Black
#10-24 x 1/2” UNC, Taptite® Zinc
Black
#10-24 x 1” UNC, Taptite® Zinc Black
1/4”-20 x 1-1/4” UNC, Zinc Black
#10-16 x 1-1/2”, Stainless Steel
#10-24 x 5/8”, Zinc Black
#10-24 x 1” Taptite® Zinc
#10-24 x 1/2” Taptite® Zinc Black
#10-12 x 3/4”, Zinc Black
#10-24 x 1” Phillips-Square with
Washer
#10-24 x 1/2”, Taptite® Zinc
1/4”-14 x 1/2”, Thread Formed, Zinc
#10-24 x 1/2”
#10-24 x 5/8”, Zinc Black
1/4”-14 x 1/2”, Zinc
#10-16 x 1”, Zinc Black
#10-24 x 1”
#10-24 x 1”, Taptite® Zinc Black
#10-24 x 1-1/4”, Taptite® Zinc
#10-24 x 1/2”, Zinc Black
#10-24 x 3/4”, Taptite® Zinc Black
#10-24 x 5/8”, Zinc Black
#10-24 x 1”, Zinc
#10-12 x 1-1/2”, Zinc
#10-12 x 1”, Zinc
#10-12 x 1-1/2”, Zinc
#10-12 x 7/8”, Zinc
#14-10 x 3/4”, Zinc
11-104
Screws
HWC06221
HWC06223
HWC06225
HWC06587
HWC06589
HWC06633
HWC06810
HWC06819
FASTENERS
HWC06949
Thread Standard
Head
Standard Pack Qty.
n/a
Binding
25
UNF
Pan
10
n/a
Truss
50
n/a
Oval
10
n/a
Oval Countersunk
25
UNC
Pan
100
UNC
Truss
100
UNC
UNC
n/a
UNC
UNC
UNC
n/a
Truss
Truss
Oval Countersunk
n/a
Flat Countersunk
Pan
Truss
100
50
100
100
20
15
100
UNC
Round
50
UNC
n/a
UNC
UNC
n/a
n/a
UNC
UNC
UNC
UNC
UNC
UNC
UNC
n/a
n/a
n/a
n/a
n/a
Pan
Truss
Truss
Oval Countersunk
Truss
Truss
Flat Countersunk
Pan
Pan
Pan
Pan
Pan
Truss
Oval Countersunk
Pan
Pan
Pan
Pan
50
100
100
10
50
100
75
50
25
75
10
25
100
4
25
25
50
75
11
HWC07664
HWC07668
HWC07686
HWC07690
HWC07702
HWC07710
HWC09058
HWC09060
HWC09062
HWC09063
HWC09064
HWC09069
HWC09071
HWC09072
HWC09074
HWC09078
HWC09079
HWC09082
HWC09084
HWC09090
HWC09092
TRP100EN-A
Description
#6-32 x 3/8”, Zinc
#8-18 x 1”, Zinc Black
#8-18 x 7/8”, Zinc Black
1/4”-20 x 3/4” UNC, Zinc
1/4”-20 x 1-1/2” UNC, Zinc Black
1/4”-20 x 1-1/4” UNC, Zinc Black
#10-24 x 1”
#10-24 x 1/2”, Stainless Steel
#10-12 x 1/2”, Zinc
#10-24 x 1/2”
1/4”-20 x 3/4” UNC
#8-18 x 1-1/4”, Stainless Steel
#10-16 x 3/4”, Ty AB, Stainless Steel
#8-18 x 2”, Polished Stainless Steel
#10-16 x 3/4”, Ty AB, Polished Stainless Steel
#7-19 x 1/2”, Zinc
#10-12 x 1”, Zinc
#10-12 x 7/8”, Washer, Zinc Black
#10-16 x 1/2”, Zinc
#7-16 x 1/2”, Zinc
#8-18 x 3/4”, Washer, Zinc Black
#8-18 x 1”, Washer, Zinc Black
#8-18 x 1”, Washer, Zinc Black
#8-18 x 1/2”
#10-16 x 1/2”, Zinc Black
#10-16 x 3/4”
#10-16 x 1”
#10-16 x 1-1/4”
#10-16 x 1-1/4”, Zinc
#10-16 x 1-1/4”, Cadmium
#8-18 x 5/8”, Washer, Zinc Black
#6-20 x 1/2”, Zinc Black
#8-18 x 1/2”, Zinc Black
#10-16 x 1/2”, Zinc Black
#10-16 x 3/4”, Zinc
Thread Standard
UNC
n/a
n/a
UNC
UNC
UNC
UNC
UNC
n/a
UNC
UNC
n/a
n/a
n/a
Head
Standard Pack Qty.
Pan
75
Pan
50
Pan
25
Truss
10
Truss
10
Truss
25
Oval Countersunk
50
Pan
4
Pan
25
Flat Countersunk
25
Oval Countersunk
25
Oval Countersunk
10
Oval Countersunk
25
Oval Countersunk
10
n/a
Oval Countersunk
5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Pan
Oval Countersunk
Oval
Oval Countersunk
Flat Countersunk
Truss
Truss
Snap
Pan
Pan
Truss
Truss
Truss
Truss
Oval Countersunk
Snap
Pan
Pan
Truss
Truss
25
50
10
125
25
50
50
25
10
15
50
25
50
50
25
15
25
75
75
50
Screws
FASTENERS
Part No.
HWC07454
HWC07474
HWC07480
HWC07490
HWC07496
HWC07500
HWC07550
HWC07560
HWC07570
HWC07572
HWC07614
HWC07656
HWC07658
HWC07660
Fasteners
11-105
Fasteners
Part No.
HWC09093
HWC09094
HWC09095
HWC09096
HWC09097
HWC09101
HWC09102
HWC09103
HWC09104
FASTENERS
HWC09105
HWC09117
HWC09379
HWU11470
HWU11509
HWU11522
HWU11535
HWU11561
HWU11587
HWU11626
HWU11639
HWU11665
HWU11691
HWU11730
HWU11769
HWU11782
HWU11810
HWU11823
HWU11836
11
Description
#10-16 x 1”, Ty AB, Zinc Black
#10-16 x 1-1/4”, Zinc Black
#8-18 x 3/4”, Ty AB, Zinc Black
#8-18 x 1”, Ty AB, Zinc Black
#8-18 x 1-1/4”, Zinc Black
#10-14 x 7/16”, Zinc Black
#10-14 x 1/2”, Taptite® Zinc Black
#10-14 x 1”, Taptite® Zinc Black
#10-14 x 1-13/16”, Black Phosphate
Oil
#6-19 x 3/4”, Taptite® Zinc Black
1/4”-20 x 5/8” UNC
#10-16 x 1/2”
#8 x 1/2”, Stainless Steel
#6-32 x 1/4”, Case Hardened
#6-32 x 1/2”, Case Hardened
#6-32 x 3/4”, Case Hardened
#8 x 1/2”, Case Hardened
#8 x 1”, Case Hardened
#10 x 3/4” Case Hardened
#10 x 1”, Case Hardened
#10 x 1-1/2”, Case Hardened
#12 x 3/4”, Case Hardened
#12 x 1-1/2”, Case Hardened
1/4” x 1”, Case Hardened
1/4” x 1-1/4”, Case Hardened
#8 x 3/4”, Case Hardened, Zinc
#8 x 1-1/4”, Case Hardened, Zinc
#10 x 3/4”, Case Hardened, Zinc
Thread Standard
Head
Standard Pack Qty.
n/a
Truss
50
n/a
Truss
50
n/a
Oval Countersunk
25
n/a
Oval Countersunk
75
n/a
Oval Countersunk
75
n/a
Truss
75
n/a
Truss
75
n/a
Truss
25
n/a
Truss
25
n/a
UNC
n/a
n/a
UNC
UNC
UNC
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Pan
Truss
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Pan
Oval Countersunk
Oval Countersunk
Oval Countersunk
50
10
15
100
50
50
200
200
200
50
50
50
50
25
100
100
100
50
50
selF-tappinG square phillips sCrews (u.s.)
Table 11-145: Fasteners - Screws - Self-Tapping Square Phillips (U.S.)
Part No.
HWC06291
Description
#7-19 x 1/2”
11-106
Screws
Thread Standard
n/a
Head
Flat
Standard Pack Qty.
100
11
Part No.
HWC06293
HWC06631
Fasteners
Description
#10-16 x 1”
#14-10 x 3/4”, Zinc
Thread Standard
n/a
n/a
Head
Oval
Pan
Standard Pack Qty.
100
25
Head
Pan
Pan
Pan
Pan
Standard Pack Qty.
15
25
25
25
selF-tappinG torx sCrews (MetriC)
Part No.
HWC04220
HWC05174
HWC05324
HWC05328
Description
Thread Standard
M12-1.75 x 70, Torx Head, Steel
n/a
M5-0.80 x 12, T25
n/a
M5-0.80 x 16, T25
n/a
M4-0.70 x 12, T20
n/a
selF-tappinG torx sCrews (u.s.)
Table 11-147: Fasteners - Screws - Self-Tapping Torx (U.S.)
Part No.
HWC03113
HWC04151
HWC04209
HWC04217
HWC04657
HWC05108
HWC05116
HWC05128
HWC05146
HWC05294
HWC05296
HWC05306
HWC05344
HWC05382
TRP100EN-A
Description
Thread Standard
1/4”-20 x 3/4” UNC, Thread Forming,
UNC
Case Hardened, Zinc Black
#10-16 x 1”, T20, Cadmium
n/a
#8-18 x 1-1/4”, T20
n/a
#8-18 x 3/4”, T20
n/a
#6-20 x 1”, T15, Zinc Black
n/a
#10-16 x 3/4”, T20, Zinc Black
n/a
#10-16 x 1”, T25
n/a
#8-18 x 3/4”, T20, Cadmium
n/a
®
n/a
1/4”-10 x 1”, T30, Plastite , Zinc
#10-16 x 1/2”, T25
n/a
#8-18 x 5/8”, T20, Zinc
n/a
#8-18 x 1”, T20, Zinc Black
n/a
#10-32 x 1/2” T20, Black
UNF
®
n/a
1/4”-10 x 5/8”, T30, Plastite , Zinc Black
Head
Standard Pack Qty.
Truss
50
Truss
Oval Countersunk
Pan
Oval Countersunk
Truss
Oval Countersunk
Oval Countersunk
Pan
Pan
Pan
Pan
Truss
Pan
25
25
10
75
50
50
50
25
10
50
25
50
10
Screws
11-107
FASTENERS
Table 11-146: Fasteners - Screws - Self-Tapping Torx (Metric)
Fasteners
11
Part No.
Description
Thread Standard
5/16”-18 x 1”, External Torx E-10 Flange
HWC06160
n/a
Screw Grade 5, Zinc
HWC10593 #10-16 x 1-1/4”, T20, Zinc Black
n/a
Head
Standard Pack Qty.
Round
2
Truss
10
set sCrews (MetriC)
Table 11-148: Fasteners - Screws - Set Screws (Metric)
Part No.
HWC05404
Description
M5-0.80 x 8, Stainless Steel
Thread Standard
n/a
Head
Socket Headless
Standard Pack Qty.
5
Thread Standard
UNF
UNC
UNF
UNC
UNC
Head
Hex Flange
Hex Socket
Hex
Square Socket
Square Socket
Standard Pack Qty.
10
25
2
10
10
Head
Standard Pack Qty.
Cylinder
10
Flat
Flat
Cylinder
4
4
1
set sCrews (u.s.)
Table 11-149: Fasteners - Screws - Set Screws (U.S.)
FASTENERS
Part No.
HWC06457
HWC00128
HWC01181
HWC07712
HWC07714
Description
#10-32 x 3/4”, Dog Point, Zinc
3/8”-16 x 3/8”, Plain
7/16”-20 x 3/4”, Plain
1/2”-13 x 1-1/2” UNC, Black
1/2”-13 x 2” UNC, Grade 5, Plain
soCKets sCrews (MetriC)
Table 11-150: Fasteners - Screws- Sockets (Metric)
Part No.
HWC04076
HWC04084
HWC04261
Description
Thread Standard
M10-1.50 x 30, Grade 12.9, Cylinder
n/a
Cap Socket Screw
M12-1.75 x 50, Grade 12.9, Black
n/a
M8-1.25 x 30, Grade 12.9, Zinc
n/a
M12-1.75 x 60, Grade 12.9
n/a
11-108
Screws
HWC00122
11
Part No.
HWC04564
HWC04566
HWC04600
HWC04604
HWC04634
HWC05356
HWC05358
HWC06680
HWC07169
HWC07641
Fasteners
Description
M10-1.50 x 60, Stainless Steel
M12-1.75 x 35, Grade 12.9, Zinc
Black
M10-1.50 x 30, Stainless Steel
M10-1.50 x 50, Stainless Steel
M10-1.50 x 65, Grade 12.9, Black
M6-1.00 x 20, Stainless Steel
M6-1.00 x 30, Stainless Steel
M10-1.50 x 50, Grade 12.9
M6-1 x 40, Grade 12.9
M6-1.00 x 16, Grade 12.9,
Dacromet®, Zinc Black
Thread Standard
n/a
Head
Pan
Standard Pack Qty.
1
n/a
Button
5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Pan
Pan
Button
Button
Button
Cylinder
n/a
4
4
2
10
5
4
10
n/a
Cylinder
10
Head
Standard Pack Qty.
Button
20
Flat Countersunk
Cylinder
Flat Countersunk
Cylinder
Flat Countersunk
Flat Countersunk
10
10
5
10
4
1
Socket
1
Button
4
Cylinder
Cylinder
4
2
Cylinder
25
Cylinder
10
Table 11-151: Fasteners - Screws - Sockets (U.S.)
Part No.
HWC10530
HWC01968
HWC04050
HWC04148
HWC04150
HWC04377
HWC04638
HWC04646
HWC06061
HWC06142
HWC06146
HWC06508
HWC06509
TRP100EN-A
Description
Thread Standard
1/4”-20 x 3/4”, Button Socket Cap
UNC
Screw, Stainless Steel
1/2”-13 x 2-1/2”, Grade 12.9
UNC
1/4”-20 x 1-3/4”, Stainless Steel
UNC
1/4”-20 x 1”, Grade 12.9, Cadmium
UNC
1/4”-20 x 2”, Stainless Steel
UNC
3/8”-24 x 1-1/4”, Grade 12.9
UNF
7/8”-14 x 5”, Grade 12.9
UNF
1/2”-20 x 5-3/4”, Center Spring,
UNF
Black
3/8”-16 x 1” Grade 8, Button Socket
UNC
Cap Screw, Stainless Steel
3/8”-24 x 1-3/4”, Stainless Steel
UNF
3/8”-24 x 2-1/2”, Stainless Steel
UNF
3/8”-24 x 2-1/4”, Grade 12.9, Zinc
UNF
Black
3/8”-24 x 2-1/2”, Grade 12.9, Plain
UNF
Screws
11-109
FASTENERS
soCKets sCrews (u.s.)
Fasteners
Part No.
HWC06514
HWC06574
HWC06596
HWC06682
HWC07582
HWC07584
HWC07586
HWC07588
HWC07590
HWC07592
HWC07600
HWC07602
11
Description
Thread Standard
3/8”-16 x 1” Grade 12.9, Button
UNC
Socket Cap Screw, Zinc Black
3/8”-16 x 1-1/2”, Grade 12.9, Button
UNC
Socket Cap Screw
3/8”-24 x 1-1/2”, Grade 12.9
UNC
1/4”-20 x 3/4”, Grade 12.9, Zinc
UNC
Black
3/8”-24 x 1-1/2”, Grade 12.9
UNC
3/8”-16 x 1-1/2”, Grade 12.9
UNC
3/8”-16 x 1-3/4”, Button Socket Cap
UNC
Screw, Stainless Steel
3/8”-16 x 2” Grade 12.9, Button
UNC
Socket Cap Screw, Zinc Black
3/8”-16 x 1-1/4”, Button Socket Cap
UNC
Screw, Grade 12.9
3/8”-16 x 1-1/2”, Button Socket Cap
UNC
Screw, Stainless Steel
5/16”-18 x 1-1/4”, Grade 12.9
UNC
5/16”-18 x 1”, Grade 12.9
UNC
Head
Standard Pack Qty.
Button
50
Button
10
Cylinder
25
Cylinder
50
Flat Countersunk
Flat Countersunk
10
25
Button
4
Button
10
Button
50
Button
4
Flat Countersunk
Flat Countersunk
25
50
FASTENERS
torx sCrews (u.s.)
Table 11-152: Fasteners - Screws - Torx (U.S.)
Part No.
HWC05338
HWC02826
HWC05110
HWC05140
HWC05204
HWC05354
HWC06821
HWC07209
Description
1/4”-10 x 1/2”, T30, Plastite®, Cadmium
#10-32 x 1/2”, T20, Zinc Black
#10-32 x 1/2”, T25, Zinc Black
#8-32 x 1”, T20, Stainless Steel
#10-32 x 3/4”, T20, Zinc Black
#8-18 x 3/4” T20, B-Point, Sems
#10-24 x 5/8”, T25, Zinc Black
#8-32 x 3/4”, T20, Stainless Steel
11-110
Screws
Thread Standard
n/a
UNF
UNF
UNC
UNF
n/a
UNC
UNC
Head
Pan
Truss
Pan
Pan
Truss
Snap
Pan
Pan
Standard Pack Qty.
15
50
25
15
25
10
25
10
11
Fasteners
winG/ thuMB sCrews (MetriC)
Table 11-153: Fasteners - Screws - Wing/ Thumb Screws (Metric)
Part No.
Description
HWC05278 M5 x 0.80 x 20, Thumb, Grade 4.8
HWC09341 M10-1.5 x 40, Wing Screw, Zinc
Thread Standard
n/a
n/a
Head
Thumb
Wing
Standard Pack Qty.
1
2
winG/ thuMB sCrews (u.s.)
Table 11-154: Fasteners - Screws - Wing/ Thumb Screws (U.S.)
Part No.
Description
Head
Thumb
Wing
Standard Pack
Qty.
10
4
FASTENERS
HWC06541 1/4”-20 x 7/8” UNC, Thumb, Head Light, Access Door
HWC07372 1/4”-20 x 1” UNC, Wing Screw, Zinc
Thread
Standard
UNC
UNC
TRP100EN-A
Screws
11-111
Fasteners
11
SPACERS
spaCers (MetriC)
Table 11-155: Fasteners - Spacers (Metric)
Part No.
HWC04123
HWC05476
HWC05552
HWC05806
Description
17mm x 38mm x 45mm, Steel
9.52mm x 19.1mm x 7.9mm, Steel, Zinc
12.1mm x 18mm, Seat Belt, Zinc
12.57mm x 15.87mm x 24mm, Aluminum
Standard Pack Qty.
1
1
1
4
spaCers (u.s.)
FASTENERS
HWC01045
Table 11-156: Fasteners - Spacers (U.S.)
Part No.
HWC05444
HWC01045
HWC05454
HWC05480
HWC05482
HWC05560
HWC06037
HWC14021
11-112
Description
1/2” x 1-1/4” Spacer
5/8” x 3” x 0.12”, Steel Zinc, PPAP
1/2” x 1-1/4” x 1/2”, Aluminum
7/16” x 1-1/4” x 1/2”, Aluminum
7/16” x 1-1/4” x 1/2”, Steel
3/4” x 1-3/8” x 1/2”, Torque Rod, Steel
13/32” x 31/32” x 0.787”, Aluminum
11/16” x 1-1/4” x 3/8”, Steel
Spacers
Standard Pack Qty.
2
15
1
1
1
1
2
1
11
Fasteners
SPECIALTY BOLTS
12 point speCialty Bolts (u.s. )
Table 11-157: Fasteners - Specialty Bolts - 12 Point Bolts (U.S. )
Part No.
HWC01209
HWC04206
HWC06118
Description
5/8”-11 x 1-3/4”, Grade 8, Plain Phosphate
5/8”-11 x 2-1/4”, Grade 8, Plain Phosphate
5/8”-11 x 1-3/4”, Grade 5, Plain
Thread Standard
UNC
UNC
UNC
Standard Pack Qty.
2
2
4
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Standard Pack Qty.
2
25
25
4
4
5
25
100
5
4
200
200
FASTENERS
CarriaGe speCialty Bolts (u.s. )
Table 11-158: Fasteners - Specialty Bolts - Carriage Bolts (U.S. )
Part No.
HWC06103
HWC01126
HWC06040
HWC06100
HWC06228
HWC06230
HWC06434
HWC06466
HWC07089
HWC09237
HWU06023
HWU06229
TRP100EN-A
Description
5/8”-18 x 3-3/4”, Grade 5, Plain
3/8”-16 x 1-1/2”, Grade 5, Cadmium Zinc
5/16”-18 x 1-1/4”, Stainless Steel
1/4”-20 x 3”, Grade 5, Zinc
5/16”-18 x 1-3/4”, Polished Stainless Steel
5/16”-18 x 1-1/2”, Polished Stainless Steel
1/4”-20 x 1”, Grade 5, Zinc Clear Iridite
3/8”-16 x 1”, Grade 5, Zinc Clear Iridite
5/16”-18 x 1”, Polished Stainless Steel
5/16”-18 x 2-1/4”, Polished Stainless Steel
#10-24 x 1”, Grade 2, Zinc
1/4”-20 x 1”, Grade 2, Zinc
Specialty Bolts
11-113
Fasteners
11
Part No.
HWU06281
HWU16229
HWU16268
Description
5/16”-18 x 1-1/2”, Grade 2, Zinc
1/4”-20 x 1”, Stainless Steel
1/4”-20 x 2-1/2”, Stainless Steel
Thread Standard
UNC
UNC
UNC
Standard Pack Qty.
100
25
25
Closed eye speCialty Bolts (MetriC)
Table 11-159: Fasteners - Specialty Bolts - Closed Eye Bolts (Metric)
FASTENERS
Part No.
HWC01305
HWC04072
HWC04843
Description
M10-1.50 x 150, Grade 9.8, Zinc
M10-1.50 x 140, Grade 9.8, Zinc
M10-1.50 x 160, Grade 9.8, Zinc
Thread Standard
n/a
n/a
n/a
Standard Pack Qty.
2
4
2
hex speCial Grade speCialty Bolts (u.s.)
Table 11-160: Fasteners - Specialty Bolts - Hex Bolts Special Grade (U.S.)
Part No.
HWC01330
HWC01552
HWC06056
HWC01340
HWC04038
HWC04070
11-114
Description
Thread Standard Standard Pack Qty.
1/4”-20 x 1”, Grade 2, Cadmium Zinc
UNC
25
5/16”-18 x 1”, Grade 2, Cadmium Zinc
UNC
5
5/16”-18 x 3/4”, Pre-Assembled Washer, High Grade, Zinc
UNC
10
1/4”-28 x 1-1/4”, Grade 2, Chrome
UNF
4
5/16”-24 x 2-1/2”, Grade 2, Cadmium Zinc
UNF
2
1/2”-20 x 1-1/2”, 1/2”, Grade 8, Proprietary Grade, Plain
UNF
1
Specialty Bolts
11
Fasteners
shoulder speCialty Bolts (MetriC)
Table 11-161: Fasteners - Specialty Bolts - Shoulder Bolts (Metric)
Part No.
Description
Thread Standard Standard Pack Qty.
HWC09217 M10-1.50 x 99mm, with Nylon Patch, Stainless Steel 18-8
n/a
2
HWC09234 M10-1.50 x 143mm, with Nylon Patch, Stainless Steel 18-8
n/a
2
shoulder speCialty Bolts (u.s.)
Part No.
Description
Thread Standard Standard Pack Qty.
HWC09217 M10-1.50 x 99mm, with Nylon Patch, Stainless Steel 18-8
n/a
2
HWC09234 M10-1.50 x 143mm, with Nylon Patch, Stainless Steel 18-8
n/a
2
step speCialty Bolts (u.s.)
Table 11-163: Fasteners - Specialty Bolts - Step Bolts (U.S.)
Part No.
HWC04648
HWC04650
HWC07221
HWC01100
HWC01880
HWC04652
HWC04654
TRP100EN-A
HWC04654
Description
1/4”-20 x 1”, Grade 2, Cadmium
1/4”-20 x 3/4”, Grade 2, Cadmium
3/8”-16 x 1-1/4”, Stainless Steel
5/16”-18 x 1-1/4”, Grade 2, Cadmium Zinc
5/16”-18 x 2”, Grade 2, Cadmium Zinc
5/16”-18 x 1-1/4”, Stainless Steel
5/16”-18 x 1-1/4”, Polished Stainless Steel
Thread Standard
UNC
UNC
UNC
UNC
UNC
UNC
UNC
Standard Pack Qty.
15
5
10
10
4
2
2
Specialty Bolts
11-115
FASTENERS
Table 11-162: Fasteners - Specialty Bolts - Shoulder Bolts (U.S.)
Fasteners
11
stud speCialty Bolts
Table 11-164: Fasteners - Specialty Bolts - Studs
Part No.
HWC04901
HWC05570
Description
Weld Stud, Stainless Steel
Frame Ground Stud, Steel
Thread Standard
n/a
n/a
Standard Pack Qty.
1
2
studs speCialty Bolts (u.s.)
Table 11-165: Fasteners - Specialty Bolts - Studs (U.S.)
FASTENERS
Part No.
HWC04015
HWC04017
HWC04023
HWC04081
HWC07748
HWC07754
HWC07756
HWC05568
HWC05572
Description
3/8”-16NC (11) / 24NF (32) x 76, Fan Hub
3/8”-16NC (11) / 24NF (32) x 81, Fan Hub
3/8”-16NC (11) / 24NF (32) x 44, Fan Hub
3/8”-24 x 153, J-Stud, Battery Box
1/4”-20 x 56mm (2.2”) Steel, Zinc Yellow
1/2”-13NC / 20NF x 5-1/8”, Air Spring Mounting
1/2”-13NC / 20NF x 6”, Air Spring Mounting
3/8”-16NC (11) / 24NF (32) x 51, Double End Stud
1/2”-20 x 3-5/16” Hex Shoulder, Double End Stud
11-116
Specialty Bolts
Thread Standard
UNC/UNF
UNC/UNF
UNC/UNF
UNF
UNC
UNC/UNF
UNC/UNF
UNC/UNF
n/a
Standard Pack Qty.
1
1
10
2
1
4
1
2
1
11
Fasteners
threaded rod speCialty Bolts (u.s.)
Table 11-166: Fasteners - Specialty Bolts - Threaded Rod (U.S.)
Description
1/4”-20 x 3’, Zinc
5/16”-18 x 3’, Zinc
3/8”-16 x 3’, Zinc
1/2”-13 x 3’, Zinc
5/8”-11 x 3’, Zinc
Thread Standard
UNC
UNC
UNC
UNC
UNC
Standard Pack Qty.
2
1
1
1
1
FASTENERS
Part No.
HWU04859
HWU04872
HWU04885
HWU04898
HWU04911
TRP100EN-A
Specialty Bolts
11-117
Fasteners
11
STRAPS
CaBle tie
Table 11-167: Fasteners - Cable Tie
Part No.
HWC06879
HWU12110
Description
15” Cable Tie, Button Head, 100lb.
15” Cable Tie, High Temperature
Material/ Finish
Plastic
CaBle tie with ChristMas tree
FASTENERS
Table 11-168: Fasteners - Cable Tie with Xmas Tree
Part No.
HWC00058
Description
Cable Tie with Christmas Tree
11-118
Straps
Material/ Finish
11
Fasteners
U-BOLTS
u-Bolts (MetriC)
Table 11-169: Fasteners - Specialty Bolts - U-Bolts (Metric)
Part No.
HWC04631
HWC05582
Description
5/16”-24 x 246mm x 241mm, Air Tank
5/16”-24 x 260mm x 285mm, Air Tank
Thread Standard
UNF
UNF
Standard Pack Qty.
2
1
u-Bolts (u.s.)
Table 11-170: Fasteners - Specialty Bolts - U-Bolts (U.S.)
HWC05584
HWC07770
HWC09336
HWC12326
HWC04000
HWC06497
HWC06503
TRP100EN-A
Description
Thread Standard
7/8”-14 x 4-3/32 x 12.172”, Round Bend U-Bolt,
UNF
Front Spring, Steel
1/4”-20 x 1-1/8” x 2”, Steel
UNC
1/4”-20 x 2-3/16” x 2-7/8”
UNC
1/2”-20 x 5-1/2” Turnbuckle, Body Only- Alloy Zinc
n/a
7/8”-14 x 4-3/32” x 10-5/8”, Front Spring
UNF
7/8”-14 x 4-1/16” x 9” Front Axle
UNF
7/8”-14 x 4-1/16” x 12-1/2” Front Axle
UNF
Standard Pack Qty.
1
10
1
1
1
1
1
U-Bolts
FASTENERS
Part No.
11-119
Fasteners
11
WASHERS
Nuts
See Page 11-67
washer Kit
Table 11-171: Fasteners - Washer Kit
Part No.
HWC05636
HWC07834
HWC05636
Measurement
Specialty Washers, 1/2" x 1-1/16" x 0.063", White
1/2" x 1-1/16 x 0.095”, Flat Polished Stainless Steel
Washer
Unit of Measure
U.S.
Qty.
50
U.S.
10
assorted washers (MetriC)
Table 11-172: Fasteners - Specialty Washers - Assorted Washers (Metric)
FASTENERS
Part No.
HWC05668
HWC05686
HWC05792
HWC07986
Description
13.20mm x 44mm x 4.80mm, Steel Bushing
4.76mm x 40mm x 192mm, Steel Rectangle Crossmember
17mm x 50.80mm x 6.30mm, Rear Engine Support
19.68mm x 41.28mm x 2.28mm, Retaining, Zinc
Standard Pack Qty.
4
1
1
15
assorted washers (u.s.)
HWC01021
HWC08037
HWC04033
Table 11-173: Fasteners - Specialty Washers - Assorted Washers (U.S.)
Part No.
HWC01021
HWC02302
HWC04033
HWC05612
11-120
Description
5/8” x 0.218”, Countersunk Finishing, Zinc
1/2”, Lock, Zinc
7/32” x 7/16”, Tapered, Battery Box, Yellow Zinc
25/32” x 3-3/4” x 3/16”, Bushing
Washers
Standard Pack Qty.
10
25
50
1
Part No.
HWC05628
HWC05650
HWC05662
HWC05696
HWC05869
HWC06415
HWC07816
HWC07886
HWC07888
HWC07978
HWC07984
HWC08037
HWC11055
Fasteners
Description
5/8” x 1-1/2” x 3/16”, Rear Engine Support, Zinc
3/4” x 1-3/4” x 3/16”, Engine Support
1-1/16” x 2-1/4” x 3/8”, Auxiliary Transmission Support, Black Nylon
15/16” x 1-3/8” x 1/16”, Alternator, Zinc
5/8” x 2-1/2”, Steel, Crossmember, Plain
1/2”, Stainless Steel, 4 Stack Belleville
21/32” x 3”, Zinc
5/8” x 1.375”, Conical, Zinc
13/64”, Oval Cowl Moulding, Aluminum
17/32” x 2-1/4” x 0.135”, Tierod, Zinc
1/2” x 1-5/8” x 0.086” Retaining Outer
5/16” x 5/8” x 1/64”, White Delrin
5/16” x 1/2”, Wave, Zinc
Standard Pack Qty.
10
10
4
25
4
4
2
25
10
25
10
300
50
Fender washers
Table 11-174: Fasteners - Washers - Fender
Part No.
HWC07814
HWC04195
HWU04842
HWC06817
HWU04830
HWU04833
HWC07912
HWU04827
HWU04839
HWC12254
HWU04836
HWU04858
HWU04846
HWC12241
HWC06708
TRP100EN-A
Size
#10 x 13/64” x 47/64” x 0.063”
#10 x 47/64” x 0.063”
1/2” x 2# 10 x 47/64” x 0.063”
1/4” x 1” x 0.090”
1/4” x 1”
1/4” x 1-1/4”
17/32” x 2” x 0.135”
3/16” x 1”
3/8” x 1-1/2”
3/8” x 1-1/4” x 0.100”
3/8” x 1-1/4”
5/16” x 1-1/2”
5/16” x 1-1/4”
5/16” x 1-1/8” x 0.063”
9/32” x 1” x 1/16”
Material
Zinc Yellow
Steel/Cadmium Zinc
Zinc
Stainless Steel
Zinc
Zinc
Zinc
Zinc
Zinc
Steel/Cadmium Zinc
Zinc
Zinc
Steel/Cadmium Zinc
Stainless Steel
Standard Pack Qty.
25
25
50
25
100
100
5
100
50
100
100
50
100
100
50
Washers
11-121
FASTENERS
11
Fasteners
11
Flat washers (MetriC)
Table 11-175: Fasteners - Washers - Flat (Metric)
FASTENERS
Part No.
HWC00199
HWC02019
HWC04085
HWC04273
HWC05614
HWC05760
HWC05810
HWC07141
HWC07960
HWC12277
HWU11390
HWU11403
HWU11416
HWU11429
HWU11442
HWU11455
Description
M16 x 33 x 3.63 Hardened DACROMET® Round Washer
M8 x 0.062, White Nylon
8mm x 17.4mm x 1.65” Thick Hardened Plain Round Washer
M8 x 23.8 x 2.66 Hardened Zinc/ Yellow Steel Round Washer
20mm x 30mm x 1” Thick Steel Zinc Yellow Cadmium Round Washer
M34 x 51 x 4.5 Hardened Round Washer
8mm x 13mm x 0.30” Thick Steel Zinc/ Yellow Spring Washer
M8 x 22.2 x 1.88, Case Hardened, Cadmium Zinc
M20 x 41.20 x 4.60 Hardened Steel
M20 x 41.20 x 4.60 Hardened Steel Zinc Yellow Round Washer
M6, Grade 10.9, Zinc
M8, Grade 10.9, Zinc
M10, Grade 10.9, Zinc
M12, Grade 10.9, Zinc
M16, Grade 10.9, Zinc
M20, Grade 10.9, Zinc
11-122
Washers
Standard Pack Qty.
25
100
50
50
1
2
25
100
10
10
100
100
100
50
50
25
11
Fasteners
Flat washers (u.s.)
Part No.
HWC01117
HWC01191
HWC01281
HWC03092
HWC03100
HWC03102
HWC03106
HWC03110
HWC03112
HWC03118
HWC03126
HWC03128
HWC03138
HWC03144
HWC03148
HWC03152
HWC03158
HWC03164
HWC03166
HWC03174
HWC03214
HWC04191
HWC04679
HWC05596
HWC05604
HWC05630
HWC05654
HWC05656
HWC05658
HWC05666
HWC05702
HWC05706
TRP100EN-A
Description
#10 x 1/2” x 0.049”, Zinc Black
1/4” x 1.00” x 0.063” Thick Steel Black Round Washer
7/16” x 59/64” x 0.065”, Stainless Steel
Flat Rubber Washer
1-1/4” x 2-1/2” x 0.165” Thick Steel Cadmium/ Zinc Round Washer
1/2” x 1-1/16” x 0.095”, Steel
1/2” x 1-1/16” x 0.095”, Stainless Steel
1/4” x 5/8” x 0.065” Thick Steel Chrome Round Washer
1/4” x 5/8” x 0.065”, Stainless Steel
3/4” x 1-15/32” x 0.134”, Cadmium Zinc
5/16” x 11/16” x 0.065”, Cadmium Zinc
5/16” x 11/16” x 0.065”, Stainless Steel Plain
#10 x 1/2” x 0.049”, Cadmium Zinc
#8 x 7/16” x 0.049”, Cadmium Zinc
1” x 2” x 0.134”, Cadmium Zinc
1/4” x 5/8” x 0.065”, Steel, Cadmium Zinc
3/16” x 9/16” x 0.049”, Cadmium Zinc
5/8” x 1-5/16” x 0.095” Thick Grade 2 Round Washer
5/8” x 1-5/16” x 0.095”, Cadmium Zinc
9/16” x 1-5/32” x 0.095”, Cadmium Zinc
#6 x 3/8” x 0.049”, Cadmium Zinc
#10 x 9/16” x 0.040, Steel, Cadmium Zinc
#12 x 9/16” x 0.065”, Cadmium Zinc
3/4” x 1-7/8” x 3/16” Thick Hardened Round Washer
#8 x 3/8” x 0.040” Thick Steel Cadmium/ Zinc Round Washer
1-1/4” x 2-1/2” x 11 gauge, Zinc
29/64” x 2-1/2” x 1/8” Thick Steel Round Washer
9/16” x 1-5/32” x 0.095”, Stainless Steel
1/4” x 53/64” x 3/16” Thick Special Striker Washer
2” x 3 x 1/8” Thick Brass Round Washer
7/16” x 0.049” Thick Steel Black Round #8 Washer
1/2” x 1-1/16” x 0.095”, Stainless Steel
Standard Pack Qty.
125
25
10
50
25
100
10
10
25
25
125
50
50
50
15
50
100
25
25
50
50
25
175
10
25
10
1
15
5
1
25
2
Washers
11-123
FASTENERS
Table 11-176: Fasteners - Flat Washers (U.S.)
Fasteners
FASTENERS
Part No.
HWC05714
HWC05718
HWC05728
HWC05732
HWC05738
HWC05739
HWC05742
HWC05744
HWC05746
HWC05748
HWC05752
HWC05754
HWC05766
HWC05772
HWC05774
HWC05784
HWC05794
HWC05796
HWC05798
HWC05802
HWC05814
HWC05816
HWC05844
HWC06101
HWC07792
HWC07798
HWC07800
HWC07802
HWC07810
HWC07812
HWC07818
HWC07830
HWC07834
HWC07842
HWC07852
HWC07856
11-124
11
Description
1/4” x 1” x 0.063”, Stainless Steel
1/4” x 1/2” x 0.063” Thick Steel Black Round Washer
#10 x 1/2” x 0.049”, Stainless Steel
5/8” x 1-3/4” x 0.100”, Polished Stainless Steel
5/16” x 5/8” x 0.063”, Stainless Steel
5/16” x 1-1/8” x 0.063”, Stainless Steel
3/8” x 1” x 0.083”, Stainless Steel
1/4” x 1/2” x 0.063”, Stainless Steel
1/2” x 1-3/8” x 0.109” Thick Steel Cadmium/ Zinc Round Washer
3/8” x 1” x 0.083”, Stainless Steel
1-1/8” x 2 x 3/16” Thick Hardened U-Bolt Round Washer
1” x 2” x 0.156”, Case Hardened
7/16” x 15/16” x 0.105”, Case Hardened Steel, Zinc Yellow
1/2” x 1-3/8” x 1/8” Thick Hardened Cadmium Round Washer
1-3/8” x 2-1/4” x 10 gauge Hardened Cadmium
#10 x 47/64” x 0.063” Thick Steel Black Round Washer
3/8” x 1.00” x 0.063”, Black Rubber
1/2” x 1-1/2” x 1/8” Thick Shock Absorber Retainer Washer
1/2” x 3/4” x 1/8”, Proprietary, Stainless Steel
9/32” x 1-1/4” x 1/8” Thick Steel Zinc Round Washer
29/32” x 1-3/4” Thick Zinc Yellow Spring Seat Washer
3/8” x 1-1/4” x 0.100”, Stainless Steel
1-1/2” x 2-5/8” x 10 gauge Zinc Yellow
3/8” x 1” x 0.075” Thick Zinc Round Washer
5/16” x 7/8” x 0.188”, Polished Stainless Steel
17/32” x 7/8” x 0.098” Thick Round Washer
1/4” x 5/8” x 0.065”, Polished Stainless Steel
3/8” x 1” x 0.083” Thick Zinc Black Round Washer
1/2” x 39/64” x 0.250” Thick Steel Round Washer
3/16” x 1/2” x 0.049” Thick Black Oxidized Round Washer
5/8” x 1-11/32” x 0.059” Thick Hardened Steel Round Washer
1-1/4” x 2-1/2”, Zinc
1/2” x 1-1/16” x 0.095”, Polished Stainless Steel
1/4” x 7/8” x 0.065”, Zinc
3/4” x 1-1/64” x 0.134”, Zinc
3/8” x 13/16” x 0.065”, Polished Stainless Steel
Washers
Standard Pack Qty.
15
75
100
4
25
10
10
25
50
4
2
4
50
10
10
25
25
100
25
25
1
4
4
50
2
4
25
100
25
50
10
4
10
125
10
25
Part No.
HWC07868
HWC07872
HWC07874
HWC07880
HWC07894
HWC07896
HWC07900
HWC07910
HWC07916
HWC07950
HWC07982
HWC08012
HWC08022
HWC09232
HWC10825
HWC11554
HWC12157
HWC12274
HWC12285
HWC12522
HWU05717
HWU05730
HWU05743
HWU05756
HWU05769
HWU05782
HWU05795
HWU05808
HWU05821
HWU05834
HWU05847
HWU05860
HWU05873
HWU05886
HWU05899
HWU05912
HWU05925
TRP100EN-A
Fasteners
Description
5/16” x 7/8” x 0.063” Thick Zinc/Clear Iridite Round Washer
5/8” x 1-5/16” x 0.095”, Polished Stainless Steel
7/16” x 59/64” x 0.065”, Zinc
5/16” x 11/16” x 0.065” Thick Zinc Black Round Washer
1/4” x 1-29/64” x 0.112” Thick Hardened Steel Round Washer
5/16” x 11/16” x 0.065”, Zinc
3/8” x 13/16” x 0.065”, Zinc
5/16” x 3/4” x 0.015” Thick Plain Round Washer
5/16” x 11/16” x 0.065”, Polished Stainless Steel
1-1/4” x 2-1/2” x 0.177” Thick Hardened Steel Round Washer
1/4” x 1-1/8” x 0.031” Thick Nylon Round Washer
7/16” Locking Tab Washer
5/16” x 0.080” Thick Spring Steel Wave #3 Washer
7/16” Neoprene Round Washer
7/16” SAE, Stainless Steel
5/16” x 11/16” x 0.065”, Polished Stainless Steel
1/4” x 5/8” x 0.065” Thick Steel Cadmium/Zinc Round Washer
1-1/4” x 2-1/2” x 0.177” Thick Hardened Steel Zinc Round Washer
1/4” x 1-1/8” x 0.031” Thick Nylon Round Washer
1/4” x 5/8” x 0.049”, Zinc
1/4” SAE, Grade 8, Zinc Yellow
5/16” SAE, Grade 8, Zinc Yellow
3/8” SAE, Grade 8, Zinc Yellow
7/16” SAE, Grade 8, Zinc Yellow
1/2” SAE, Grade 8, Zinc Yellow
9/16” SAE, Grade 8, Zinc Yellow
5/8” SAE, Grade 8, Zinc Yellow
3/4” SAE, Grade 8, Zinc Yellow
7/8” SAE, Grade 8, Zinc Yellow
1” SAE, Grade 8, Thru Hardened, Zinc Yellow
1/4” USS, Grade 8, Zinc Yellow
5/16” USS, Grade 8, Zinc Yellow
3/8” USS, Grade 8, Zinc Yellow
7/16” USS, Grade 8, Zinc Yellow
1/2” USS, Grade 8, Zinc Yellow
9/16” USS, Grade 8, Zinc Yellow
5/8” USS, Grade 8, Zinc Yellow
Standard Pack Qty.
25
10
75
5
25
125
125
50
50
10
100
2
50
50
100
25
100
50
25
100
100
100
100
100
100
100
50
50
50
50
100
100
100
100
100
100
50
Washers
11-125
FASTENERS
11
Fasteners
Part No.
HWU05938
HWU05951
HWU05964
HWU10758
HWU10771
HWU10784
HWU10797
HWU10810
11
Description
3/4” USS, Grade 8, Zinc Yellow
7/8” USS, Grade 8, Zinc Yellow
1” USS, Grade 8, Zinc Yellow
#8 SAE, Stainless Steel
#10 SAE, Stainless Steel
1/4” x 5/8” x 0.065”, Stainless Steel
5/16” SAE, Stainless Steel
3/8” SAE, Stainless Steel
Standard Pack Qty.
50
50
50
200
100
100
100
100
internal loCK washers
Table 11-177: Fasteners - Internal Lock Washers (Internal)
FASTENERS
Part No.
HWC03188
HWC03186
HWC08006
HWC08002
HWC05832
HWC03200
HWC02342
HWC03204
Description
#8 x 0.333” x 0.021” Thick, Zinc
#10 x 0.373” x 0.023” Thick, Zinc
1/4” x 0.469” x 0.026” Thick, Zinc
3/4” x 1.233” x 0.051” Thick, Zinc
3/8” x 0.681” x 0.036” Thick, Stainless Steel
3/8” x 0.681” x 0.036” Thick, Zinc
5/16” x 0.602” x 0.062” Thick, Zinc
5/8” x 1.058” x 0.046” Thick, Zinc
Standard Pack Qty.
10
100
20
25
100
25
50
50
Round Washers (Metric)
Table 11-178: Fasteners - Screws - Round Washers (Metric)
HWC05782
Part No.
Description
HWC00180 M20 x 37mm x 3.97mm, Case Hardened, DACROMET®
HWC01115 10.32mm x 26.99mm x 3mm, Case Hardened, Yellow Cadmium
HWC04241 6.30mm x 19mm x 0.80mm, Nylon
11-126
Washers
Standard Pack Qty.
50
10
75
11
Description
6mm x 14.60mm x 1.30mm, Nylon
16.50mm x 33mm x 3.62mm, Case Hardened, Yellow Zinc
9mm x 74mm x 0.75mm, Stainless Steel, Mirror Bracket
9mm x 27mm x 0.75mm, Stainless Steel, Mirror Bracket
M12 x 27mm x 3.63mm, Case Hardened, Cadmium
11.20mm x 19mm x 1.60mm, Natural Nylon
4.90mm x 11mm x 0.80mm, Black Nylon
11mm x 38mm x 4.8mm, Rubber / Stainless Steel
Standard Pack Qty.
100
50
2
2
25
50
25
4
FASTENERS
Part No.
HWC04637
HWC04887
HWC05622
HWC05624
HWC05644
HWC05776
HWC05778
HWC05782
Fasteners
TRP100EN-A
Washers
11-127
Fasteners
11
round washers (u.s.)
HWC09230
HWC04003
Table 11-179: Fasteners - Specialty Washers - Round Washers (U.S.)
FASTENERS
Part No.
HWC02043
HWC03043
HWC03212
HWC03230
HWC04003
HWC05632
HWC05636
HWC05640
HWC05642
HWC05712
HWC05724
HWC05768
HWC07794
HWC07806
HWC07828
HWC07848
HWC07876
HWC07890
HWC07892
HWC07946
HWC07958
HWC07992
HWC07996
HWC09204
HWC09218
HWC09223
HWC09225
HWC09230
HWC09231
HWC09233
11-128
Description
1-1/4” x 2-1/2” x 0.120”, Case Hardened, Zinc
1/2” x 1-3/4” x 0.112”, Case Hardened, Black Zinc
#10 x 15/32” x 0.105”, Nylon
1/4” x 5/8” x 0.062”, Teflon
7/8” x 1-5/8” x 0.250”, Case Hardened Steel
1-1/4” x 2-1/2” x 7 gauge, Zinc
1/2” x 1-1/16” x 0.063”, White Nylon
0.286” x 0.63” x 0.065”, Brass
7/8” x 2-1/4” x 1/8”, Plain
5/8” x 1-5/16” x 0.150”, Case Hardened, Cadmium
1/2” x 1-3/4” x 0.100”, Cadmium Zinc
7/16” x 1-1/16” x 0.141”, Case Hardened, Steel
7/16” x 1-1/2” x 0.105”, Steel
3/8” x 1-1/4” x 0.105”, Black Zinc
1/4” x 1-1/4” x 0.048”, Zinc
3/4” x 1-15/32” x 0.177”, Case Hardened, Plain
7/8” x 2-1/4” x 0.125”, USS, Plain
1/4” x 1-1/8” x 0.031”, Nylon
1/2” x 1” x 0.094”, White Delrin®
1” x 2” x 0.177”, Case Hardened, Yellow Cadmium
3/8” x 13/16” x 0.080”, Case Hardened Steel, Yellow Zinc
1/2” x 1-1/4” x 0.086”, USS, Cadmium
1-1/4” x 2-1/2” x 0.250”, Case Hardened, Zinc
1-1/4” x 2-1/2” x 0.160”, Case Hardened, Yellow Zinc
1-1/4” x 2-1/2” x 0.150”, Case Hardened, Yellow Zinc
1-1/4” x 2-1/2” x 0.180”, Case Hardened, Zinc
1-1/4” x 2-1/2” x 0.140”, Case Hardened, Yellow Zinc
1-1/4” x 2-1/2” x 0.200”, Case Hardened, Yellow Zinc
7/16”, Neoprene
1-1/4” x 2-1/2” x 0.190”, Case Hardened, Zinc
Washers
Standard Pack Qty.
10
10
5
10
2
4
50
10
4
25
25
75
10
50
100
50
10
25
50
4
100
25
2
4
4
4
4
2
50
4
11
Part No.
HWC11265
HWC12248
Fasteners
Description
5/16” x 33/64” x 0.031”, Nylon
3/8” x 13/16” x 0.065”, Case Hardened Steel, Cadmium Zinc
Standard Pack Qty.
25
25
sealinG washers (MetriC)
Table 11-180: Fasteners - Specialty Washers - Sealing Washers (Metric)
Part No.
HWC05826
Description
5mm x 25mm x 3.20mm, Neoprene, Sunvisor Seal
Standard Pack Qty.
15
sealinG washers (u.s.)
Part No.
HWC01057
HWC03222
HWC03226
HWC03227
HWC03228
Description
3/8”, Neoprene/Stainless Steel, Sealing, Black
3/8” x 1-1/2” x 1/8”, Sealing, Stainless Steel
1/4”, Stat-O-Seal®
3/8”, Stat-O-Seal®, Zinc
5/16”, Stat-O-Seal®, Zinc
Standard Pack Qty.
2
10
15
10
10
split-loCK washers (MetriC)
Table 11-182: Fasteners - Split-Lock Washers (Metric)
Part No.
HWU11494
HWU11507
HWU11520
HWU11533
HWU11546
TRP100EN-A
Description
M8, Grade 10.9, Zinc
M10, Grade 10.9, Zinc
M12, Grade 10.9, Zinc
M16, Grade 10.9, Zinc
M20, Grade 10.9, Zinc
Standard Pack Qty.
100
100
50
50
25
Washers
11-129
FASTENERS
Table 11-181: Fasteners - Specialty Washers - Sealing Washers (U.S.)
Fasteners
11
split-loCK washers (u.s.)
Table 11-183: Fasteners - Split-Lock Washers (U.S.)
FASTENERS
Part No.
HWC02300
HWC02304
HWC02310
HWC02312
HWC02314
HWC02318
HWC02322
HWC02328
HWC02330
HWC02338
HWC06934
HWC06936
HWC07849
HWC07850
HWC07862
HWC07966
HWC07968
HWC07970
HWC07998
HWU05977
HWU05990
HWU06003
HWU06016
HWU06029
HWU06042
HWU06055
HWU06068
HWU06081
HWU06094
HWU08584
HWU10875
11-130
Description
1/4” x 0.535” x 0.084”, Stainless Steel
1.00” x 1.661” x 0.250”, Zinc
1/4” x 0.489” x 0.062”, Stainless Steel
1/4” x 0.489” x 0.062”, Zinc
3/4” x 1.271” x 0.188”, Zinc
3/8” x 0.683” x 0.094”, Stainless Steel
5/16” x 0.586” x 0.078” Thick, Zinc
5/8” x 1.079” x 0.156” Thick, Zinc
7/16” x 0.779” x 0.109” Thick, Zinc
9/16” x 0.971” x 0.141” Thick, Zinc
3/8” x 0.683” x 0.094” Thick, Zinc
3/8” x 0.691” x 0.115” Thick, Zinc
9/16” x 0.981” x 0.170” Thick, Zinc
3/4” x 1.291” x 0.226”, Zinc
3/8” x 0.683” x 0.094”, Stainless Steel
7/16” x 0.787” x 0.133” Thick, Zinc
3/8” x 0.683” x 0.094” Thick, Zinc
5/16” x 0.586” x 0.078” Thick, Black Zinc
#10 x 0.334” x 0.047”, Zinc
1/4”, Grade 8, Zinc
5/16”, Grade 8, Zinc
3/8”, Grade 8, Zinc
7/16”, Grade 8, Zinc
1/2”, Grade 8, Zinc
9/16”, Grade 8, Zinc
5/8”, Grade 8, Zinc
3/4”, Grade 8, Zinc
7/8”, Grade 8, Zinc
1”, Grade 8, Zinc
1/4”, Grade 5, Plain
1/4” x 0.489” x 0.062”, Stainless Steel
Washers
Standard Pack Qty.
25
25
25
125
25
50
50
75
25
50
100
75
10
50
25
75
125
25
25
100
100
100
100
100
10
50
50
50
50
250
100
11
Part No.
HWU10888
HWU10901
Fasteners
Description
5/16”, Stainless Steel
3/8”, Stainless Steel
Standard Pack Qty.
100
100
struCtural washers (MetriC)
Table 11-184: Fasteners - Structural Washers (Metric)
Part No.
HWC05722
HWC07962
HWC07972
Description
M20 x 37mm x 4mm, Case Hardened, Cadmium
M12 x 26.35mm x 4.10mm, Case Hardened, Zinc Yellow
M16 x 33.20mm x 4.10mm, Case Hardened, Zinc Yellow
Standard Pack Qty.
10
10
10
Table 11-185: Fasteners - Structural Washers (U.S.)
Part No.
HWC07926
HWC07930
HWC07934
HWC07936
HWC07944
Description
5/16” x 11/16” x 0.080” Thick, Case Hardened, Zinc Yellow
7/16” x 59/64” x 0.080” Thick, Case Hardened, Zinc Yellow
1/2” x 1-1/16” x 0.177” Thick, Case Hardened, Zinc Yellow
5/8” x 1-5/16” x 0.177” Thick, Case Hardened, Zinc Yellow
7/8” x 1-3/4” x 0.177” Thick, Case Hardened, Zinc Yellow
Standard Pack Qty.
2
50
50
50
15
thrust washers (u.s.)
Table 11-186: Fasteners - Specialty Washers - Thrust Washers (U.S.)
Part No.
HWC05828
HWC05830
TRP100EN-A
Description
1.150” x 3” x 12 Gauge
1-5/8” x 3” x 12 Gauge, Plain
Standard Pack Qty.
4
4
Washers
11-131
FASTENERS
struCtural washers (u.s.)
Fasteners
11
tooth washers
(external)
Table 11-187: Fasteners - External
Tooth Washers (External)
Part No.
HWC02320
HWC03184
HWC03190
HWC03196
HWC03206
HWC04415
HWC06952
HWU08746
Description
5/16” x 0.599” x 0.031” Thick, Zinc
#10 x 0.403” x 0.023” Thick, Zinc
1/2” x 0.890” x 0.041” Thick, Zinc
1/4” x 0.502” x 0.026” Thick, Zinc
7/16” x 0.75” x 0.036” Thick, Zinc
3/8” x 0.682” x 0.036” Thick, Zinc
1/2” x 0.890” x 0.041” Thick, Zinc
1/2”, Plain
FASTENERS
11-132
Washers
Standard Pack Qty.
50
100
25
25
25
25
100
100
11
Notes
FASTENERS
NOTES
TRP100EN-A
Notes
11-133
®
For information, updates, or corrections,
please contact us at [email protected]
No part of this marketing material may be
reproduced in any manner without written
permission from TRP® North America.
TRP100EN-A
06/14/2012
TRP® North America
750 Houser Way N .
Renton, WA 98057
www .TRPParts .com
Download

Fasteners Catalog – pdf