H100 COND Transmitter
Specification Data Sheet
Hamilton H100 COND Transmitter combines ease of use and reliability. It has
been designed for universal process application including use in pharmaceutical,
chemical, food & beverage industries as well as water / waste water treatment.
The self-explaining user interface ensures comfortable and intuitive handling.
Hamilton H100 COND Transmitter provides continuous sensor monitoring and
preventive maintenance indication for maximal reliability.
H100 COND Specifications
COND input
Input for 2-electrodes or 4-electrodes
Effective ranges
Conductivity 0.2 • c ... 1000 mS • c
Measuring ranges
Conductivity
0.000 ... 9.999 μS/cm
00.00 ... 99.99 μS/cm
000.0 ... 999.9 μS/cm
0000 ... 9999 μS/cm
0.000 ... 9.999 mS/cm
00.00 ... 99.99 mS/cm
000.0 ... 999.9 mS/cm
0.000 ... 9.999 S/cm
00.00 ... 99.99 S/cm
Resistivity
00.00 ... 99.99 MOhm • cm
Concentration
0.00 ... 9.99 % by wt
Salinity
0.0 ... 45.0 ‰ (0 ... 35 °C)
Response tine (T 90 )
< 1 s (Sensocheck off)
< 3 s (Sensocheck on)
Meas. error
< 1 % meas. val. + 0.4 μS • c
1, 2, 3)
Concentration Determination
01
NaCI
Modes
02
HCI
03
NaOH
04
H 2SO 4
05
HNO 3
*)
Sensor standardization
Operating modes
- Input of cell constant with simultaneous display of conductivity and temperature
- Input of conductivity of calibration solution with simultaneous display of cell constant and
aitemperature
- Product calibration
- Temperature probe adjustment
Permissible cell constant
H100 DO Specifications (continued)
Sensor monitoring
Sensocheck
Polarization detection and monitoring of cable capacitance
®
Provides information on the sensor
condition (Sensocheck ®)
Sensor monitor
Direct display of measured values from sensor for validation (resistance / temperature)
Temperature input
*)
Pt 100 / Pt 1000 / NTC 30 kOhm
2-wire connection, adjustable
Measuring range
Pt 100 / Pt 1000
-20.0 ... +200.0 °C (-4 ... +392 °F)
NTC 30 kOhm
Resolution
i
-20.0 ... +150.0 °C (-4 ... +302 °F)
0.1 °C / 0.1 °F
Meas. error
< 0.5 (< 1K for Pt 100; < 1K for NTC >100 °C)
1, 2, 3)
Temperature compensation
(ref. temperature 25 °C)
i
i
Output 1
Overrange
0/4 … 20 mA, max. 10 V, floating (galvanically connected to output 2)
22 mA in the case of error messages
*)
Output filter
Low-pass, filter time constant: 0 … 120 s
*)
Minumum spam
Process variable
Temperature
Measurement error
Start/end of scale
1)
< 0.3 % current value + 0.05 mA
*)
Permissible span
Alarm contact
Relay contact, floating
Display
approx. 5 VA, 2.5 W
Overvoltage category II, protection class II
Ambient temperature
–20 … +55 °C
Transport/Storage temp
–20 … +70 °C
Relative humidity
EMC
Emitted interference
Class B (residential area),
Immunity to interference
Industry
Enclosure
Molded enclosure made from PBT (polybutylene terephtlate)
pipe mounting 243082 (
Ingress protection
IP 65 / NEMA 4X
*) User-defined; 1) To IEC 746 Part 1, at nominal operating conditions; 2) ±1 count; 3) Plus sensor error
© 2013 Hamilton Bonaduz AG. All rights reserved.
Calimatic ® and Sensocheck® are registed trademarks by Knick Elektronische Messgeräte GmbH & Co. KG
P/N: 695155/00 — 11/2013
Hamilton Americas & Pacific Rim
Web: www.hamiltoncompany.com
800-648-5950
Europe: +41-81-660-60-60
USA:
4970 Energy Way
Reno, Nevada 89502 USA
Tel: +1-775-858-3000
Fax: +1-775-856-7259
sales@hamiltoncompany.com
Hamilton Europe, Asia, & Africa
Via Crusch 8
CH-7402 Bonaduz, Switzerland
Tel: +41-81-660-60-60
Fax: +41-81-660-60-70
contact@hamilton.ch
To find a representative in your area, please visit hamiltoncompany.com/contacts.