MO496-40
General Information
Extended Product Type:
Product ID:
EAN:
Catalog Description:
Long Description:
MO496-40
1SAM590000R1005
4013614265785
MO496-40 Manual Motor Starter Magnetic Only
The MO496-40 manual motor starter magnetic only is a 55 mm width device with a rated
operational current of Ie = 40.0 A. This device is used to manually switch on and off motors
and to protect them reliably and without the need for a fuse from short-circuits. The manual
motor starter magnetic only offers a rated service short-circuit breaking capacity Ics = 50 kA
at 400 VAC. Further features are the build-in disconnect function, trip-free mechanism and a
rotary handle with a clear switch position indication. The manual motor starter magnetic only
is suitable for three- and single-phase applications. The handle is lockable to protect against
unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases and
shunt trips are available as accessory.
Categories
Products » Low Voltage Products and Systems » Circuit Breakers » Manual Motor Starters
Products » Low Voltage Products and Systems » Control Products » Manual Motor Starters » Manual Motor Starters
Ordering
EAN:
Minimum Order Quantity:
Customs Tariff Number:
4013614265785
1 piece
85362010
Dimensions
Product Net Width:
Product Net Height:
Product Net Depth:
Product Net Weight:
70 mm
165 mm
174 mm
2.218 kg
Container Information
Package Level 1 Units:
Package Level 1 Width:
Package Level 1 Height:
Package Level 1 Length:
Package Level 1 Gross Weight:
1 piece
76.5 mm
171 mm
190 mm
2.193 kg
Environmental
Ambient Air Temperature:
Ambient Air Temperature
Compensation:
Maximum Operating Altitude
Permissible:
Resistance to Shock acc. to IEC
60068-2-27:
RoHS Status:
Operation -20 ... +70 °C
Storage -50 ... +80 °C
No
2000 m
11 ms Pulse 25g
Following EU Directive 2002/95/EC August 18, 2005 and amendment
Technical UL/CSA
Maximum Operating Voltage
UL/CSA:
Ampere Rating UL/CSA:
Horsepower Rating UL/CSA:
General Use Rating UL/CSA:
Connecting Capacity Main Circuit
UL/CSA:
Tightening Torque UL/CSA:
Additional Information
Main Circuit 600 V AC
40 A
(200 V AC) Three Phase 10 Hp
(208 V AC) Three Phase 10 Hp
(220 ... 240 V AC) Three Phase 15 Hp
(440 ... 480 V AC) Three Phase 30 Hp
(550 ... 600 V AC) Three Phase 40 Hp
(600 V AC) 40 A
Flexible 1x 10 ... 2/0 AWG
Flexible 1/2x 10 ... 1/0 AWG
Stranded 1x 10 ... 2/0 AWG
Stranded 1/2x 10 ... 1/0 AWG
Main Circuit 35 ... 53 in·lb
Actuator Type:
Connecting Capacity-Main Circuit:
Conventional Free-air Thermal
Current (Ith):
Degree of Protection:
Electrical Durability:
IIT Publishing Status:
Mechanical Durability:
Mounting on DIN Rail:
Mounting Position:
Number of Poles:
Number of Protected Poles:
Pollution Degree:
Power Loss:
Product Main Type:
Product Name:
Rated Current (In):
Rated Frequency (f):
Rated Impulse Withstand Voltage
(Uimp):
Rated Instantaneous Short-Circuit
Current Setting (Ii):
Rated Insulation Voltage (Ui):
Rated Operational Current (Ie):
Rated Operational Current AC-3 (Ie):
Rated Operational Voltage:
Rated Service Short-Circuit
Breaking Capacity (Ics):
Rated Ultimate Short-Circuit
Breaking Capacity (Icu):
Rated Uninterrupted Current (Iu):
Recommended Screw Driver:
Remarks:
RoHS Date:
Setting Range:
Standards:
Tightening Torque:
Wire Stripping Length:
Rotary Handle
Flexible with Ferrule 1x 2.5 ... 50 mm²
Flexible with Ferrule 2x 2.5 ... 35 mm²
Solid 1/2x 2.5 ... 16 mm²
Stranded 1x 10 ... 70 mm²
Stranded 2x 10 ... 50 mm²
Main Circuit 40 A
Housing IP20
Main Circuit Terminals IP00
25000 cycle
Level 0 - Information enabled
50000 cycle
TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
Position 1 to 6
3
3
3
at Rated Operating Conditions per Pole 6.7 W
MO496
Manual Motor Starter Magnetic Only
40 A
Main Circuit 50 Hz
Main Circuit 60 Hz
Main Circuit 6 kV
520 A
690 V
40 A
40 A
Main Circuit 690 V AC
Main Circuit 450 V DC
(230 V AC) 100 kA
(400 V AC) 50 kA
(440 V AC) 50 kA
(500 V AC) 9 kA
(690 V AC) 6 kA
(230 V AC) 100 kA
(400 V AC) 100 kA
(440 V AC) 100 kA
(500 V AC) 18 kA
(690 V AC) 12 kA
40 A
Hexagon 4
For overload protection of the motors, an appropriate thermal or electronic overload relays
must be used
0016
None
IEC/EN 60947-1
IEC/EN 60947-2
IEC/EN 60947-4-1
UL 508
CSA 22.2 No. 14
Main Circuit 4 ... 6 N·m
Main Circuit 17 mm
Certificates and Declarations (Document Number)
cUL Certificate:
Data Sheet, Technical Information:
Declaration of Conformity - CE:
DNV Certificate:
EAC Certificate:
GOST Certificate:
RoHS Information:
UL Certificate:
Classifications
1SAA937000-1701
1SBC100173C0201
1SAD938504-0051
1SAA937000-0301
1SAA937001-2703
1SAA937000-2703
1SAA918002-4401
UL_E167205
eClass:
ETIM 4:
ETIM 5:
Object Classification Code:
UNSPSC:
7.0 27370401
EC000074 - Motor protective circuit-breaker
EC000074 - Motor protective circuit-breaker
F
39121521