P9012 P9013 P9014
Project Name
Type
Quantity
Specifier
Full Name
Company
Stem Columnmn
Multi-Pipe Columnmn
Tube Columnmn
Address
Phone
Email
Ordering Information
1. Select any Davis Muller bowl design from the catalog. Note that
certain models may have design features that may preclude them
from cluster mounting. (Consult factory for possible
modifications.)
2. Select applicable design details and options from the individual
catalog pages.
3. Select desired bowl diameter and number of arms required.
4. Select desired column style. Note that any column design
may be combined with any bowl.
5. Select finish and any other optional equipment.
Diameter
6. Use all above information to create number using the
Ordering Key below.
HEIGHT
Diameter
Diameter
Bowl
Diameter+
Height
16 - 20"
58"
48"
24 - 36"
70"
54"
30 - 32"
82"
58"
Ordering Key
P
-
-
MOUNTING
MODEL
P-Pendant
9012 -2 arm
X-Special*
9013 -3 arm
LAMPING
Refer to individual
“DIFFUSER MODEL”
catalog sheet for
selections.
DETAIL
Refer to individual
“DIFFUSER MODEL”
catalog sheet for
selections.
DIFFUSER MODEL
P1111 P2155 P3110
P1121 P2160 P3160
P1130 P2165 P7410
P1140 P2170 P8110
9014 -4 arm
-
-
Other diffuser models may be applicable
to this cluster. Consult factory prior to
specification.
-
OPTIONS
O-Standard
SA-Satin Acrylic
TCC-Top Cover-Clear
Acrylic**‡
TCW-Top Cover-White
Acrylic**‡
(Fluorescent only)
X-Special*
VOLTAGE
1-120 V
2-277 V
3-347 V*
X-Special*
DIFFUSER DIAMETER
Refer to individual
“DIFFUSER MODEL”
catalog sheet
forselections.
MIN. DIA. - 16”
MAX. DIA. - 32”
X-Special*
COLUMN STYLE
S-Stem
T-Tube
M-Multi-Pipe
X-Special*
Select from photos above.
-
-
FINISH
Refer to individual
“DIFFUSER MODEL”
catalog sheet for selections.
OVERALL HEIGHT
O-Standard
X###-Special Overall Height indicate in inches† (ie. X120”)
A-Will Advise
†Column heights remain the same as
standard models except on shorter than
standard models or upon special order.
*Consult Factory Prior To Specification.
**Top Cover option is intended to shield direct
view of lamp,
does not fully seal against dust, bugs and debris.
†PK1 Option required for overall heights greater than
standard. Not required for single stem.
Specifications
‡Will reduce fixture efficiency/Fluorescent Only
CONSTRUCTION
Diffuser: See individual pendant catalog pages.
Cluster Frame: Structural components are steel.
Decorative components are solid brass.
ELECTRICAL
Reference diffuser model for lamping matrix.
CERTIFICATION
All units: UL listed for dry location.
Consult factory for damp location and Canadian labeling-
MOUNTING
Standard: max. 45° swivel for flat and sloped
ceilings and/or seismic compliance.
Mounts to an octagonal J-Box.
Due to the weight of these fixtures, for safety most
will require supplemental support (by others) per
electrical and building codes.
SUSPENSION
Standard Length: see dimensional matrix.
Non-Standard Length:
< standard length - consult factory
> standard length - requires optional pendant
extension kit. Extra 6” minimum length required.
Stems made in maximum 3 ft. lengths. Longer lengths
use couplings as required.
OAH:
Overall standard height is measured from
ceiling to bottom
PHOTOMETRICS
IES Photometric fi les can be generated upon request.
Contact your sales representative.
P9012-P9014 7-19-13
82 Stevens Street E. Taunton MA 02718
Toll Free 800-977-4470
Fax 508-823-9431
These fixture designs are copyright protected. Davis/Muller reserves
the right to change fixture design and specifications in any way that
will not significantly alter appearance or performance.
©2013 Davis/Muller Lighting
P9014 shown
P9012 - P9014 clusters
P1111
P1120
P1130
Davis/Muller clusters may be
specified using virtually any bowl
design and lamping configuration
in our catalog.
Shown with P1121 bowls and single stem
2-arm column in Satin Nickel finish
P2165
P2170
P3110
P2155
P1140
P2160
Bowls, Sizes, Columns and Finishes
may be specified in any combination.
All models are available in
3 different sizes.
Shown with P3110 bowls and Multi-Stem
3-Arm column in Satin Brass finish
P3160
P7410
P8110