DET NORSKE VERITAS
TYPE APPROVAL CERTIFICATE
CERTIFICATE NO. E-13346
This is to certify that the
Terminal Block
with type designation(s)
UT
Issued to
Phoenix Contact GmbH & Co. KG
Blomberg, Germany
is found to comply with
Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore
Standards
Application
Universal terminal blocks for use in Marine and Offshore Applications
This Certificate is valid until 2016-12-31.
Issued at Høvik on 2014-05-07
for Det Norske Veritas AS
DNV local station: DNV Essen
Approval Engineer: Nicolay Horn
Marit Laumann
Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such
person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum
compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers,
employees, agents and any other acting on behalf of Det Norske Veritas.
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Høvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 1 of 3
Certificate No.: E-13346
File No.:
828.30
Job Id.:
262.1-000839-4
Name & Place of Manufacturer
Phoenix Contact GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Phoenix Contact Wielkopolska Spolka z.o.o.
Ul. Celna 5
64-300 Nowy Tomysl
Poland
Phoenix Feinbau GmbH & Co. KG
Gustavstr. 3
58511 Lüdenscheid
Germany
Eviop Tempo S.A.
Leoforos Kymis 212
340 02 Vasilikon
Greece
Phoenix Contact India Pvt. Ltd
Dhatir Road, Village-Dhudhola
Prithla, Palwal, Faridabad
121102 Haryana
India
Phoenix Contact Asia-Pacific (Nanjing) Co. Ltd.
36 Phoenix Road
Jiangning Nanjing
211100 Nanjing
Peoples Republic of China
Product description
Pluggable spring cage terminal blocks with according to the following type designations:
Type designation
UT 2,5
UT 2,5-PE
UT 4
UT 4-PE
UT 4-TWIN
UT 4-TWIN BU
UT 4-TWIN-PE
UT 4-QUATTRO
UT 4-QUATTRO BU
UT 4-QUATTRO-PE
UT 6
UT 6-PE
UT 10
UT 10-PE
UT 4-MTD
UT 4-MTD-PE
UT 4-MTD-PE/S
UT 4-MTD-DIO/L-R
UT 4-MTD-DIO/R-L
UT 4-MTD-DIO/L-R-P/P
UT 4-MTD-DIO/R-L-P/P
UT 4-HESI (5X20)
UT 4-HESILED 24 (5X20)
UT 4-HESILED 60 (5X20)
UT 4-HESILA 250 (5X20)
UT 4-HEDI
Rated Cross section
2
[mm ]
Rated Current
[A]
2,5
2,5
4
4
4
4
4
4
4
4
6
6
10
10
4
4
4
4
4
4
4
4
4
4
4
4
24
32
32
32
32
32
41
57
32
1
1
1
1
6,3*
6,3*
6,3*
6,3*
16
Rated Insulation
Voltage
[V]
1000
1000
500
500
500
500
1000
1000
1000
800
800
800
800
250*
250*
250*
250*
500
Part No.
3044076
3044092
3044102
3044128
3044364
3044500
3044380
3044571
3044584
3044597
3044131
3044157
3044160
3044173
3046184
3046223
3046207
3046210
3046236
3046346
3046359
3046032
3046090
3046126
3046100
3046249
* The current is determinded by the fuse, the voltage by the light indicator
Application/Limitation
Installation in according to Phoenix catalogue and DNV Rules.
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Høvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 2 of 3
Certificate No.: E-13346
File No.:
828.30
Job Id.:
262.1-000839-4
Type Approval documentation
Tests carried out
Type tests in accordance with DIN EN 60947-7-1, DIN EN 60947-7-2, DIN EN 60947-7-3 and vibration test in accordance with
IEC 60068-2-6 and/or DIN EN 50155 and climatic test in accordance with IEC 60068-2-30.
Marking of product
Phoenix Contact - Type designation - Main data.
All type designation may be followed by suffix such as color or packaging options.
Periodical assessment
The scope of the periodical assessmentis to verify that the conditions stipulated for the Type approval is complied with and that
no alterations are made to the product design or choice of materials.
The main elements of the survey are:
•
Inspection on factory samples, selected at random from the production line (where practicable)
•
Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to
be carried out)
•
Review of type approval documentation
•
Review of possible change in design, materials and performance
•
Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.
Survey to be performed at least every second year.
END OF CERTIFICATE
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Høvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 3 of 3