Model Fuel-Gard
®
2" Monitor Filters
ELIMINATE THE NEED FOR OTHER WATER DEFENSE
DEVICES AND RECEIVE MAXIMUM WATER REMOVAL,
SOLIDS HOLDING CAPACITY AND SHUTDOWN PROTECTION
TO ASSURE CLEAN, DRY FUEL DELIVERY WHILE MEETING
THE LATEST A.P.I./I.P. SPECIFICATION
The new PECOFacet Models HFG(I) and FGH(I) Horizontal FuelGard monitor housings, equipped with either PECOFacet’s
Models FG or PS 2" (51 mm) OD monitor cartridges, continually
check the entire flow of fuel, not just mere samples, for water
or solids contamination. By performing three jobs, the Model
FG monitors assure clean, dry fuel. They absorb free and
emulsified water, remove ultra-fine solids even when surfactants
and fuel additives are present, and shut down the systems
flow when hit with a localized slug of water. In addition, the
Model PS monitors positively shut down system flow when
pressure drop across the cartridge exceeds 40 psi (276 kPa)
eliminating any possibility of media or water transmission while
also preventing the system being reused. They are designed
to flow from the outside to inside at a rate of 1 USGPM (3.79
lpm) per inch of length.
PECOFacet's Fuel-Gard monitor housings are built to ASME
Code, constructed of carbon steel, stainless steel or aluminium
and designed for maximum working pressure of 175 psi (12
Bar). They are available with or without the inter-lock safety
device. Housings fitted with the inter-lock safety device are
furnished with Model FG monitor cartridges. When inter-locks
are not required, either the FG or PS monitors can be used.
Both monitor cartridges meet and exceed the latest edition of
A.P.I./I.P. Specifications and Qualification Procedures for Aviation
Fuel Filter Monitors With Absorbent Type Elements.
PECOFacet's Model GNG monitor cartridges are interchangeable
with the Models FG and PS when MIL-M-81380C(AS)
requirements are desired.
© 2009 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
Housings
www.pecofacet.com
STANDARD HOUSING DESIGN
• Welded carbon steel, stainless steel, aluminium and cast
aluminium construction
• ASME Code, Section VIII construction, stamped and
certified or "CE" marked
• Design pressure: 12 bar (174 psi) — 50ºC (122 ºF)
• Buna-N closure o-ring, other materials available
• Exterior: Primer coated for carbon steel construction
• Interior: Epoxy coated for carbon steel construction
• Spider plate
STANDARD CONNECTIONS
•
•
•
•
b
Flanged inlet and outlet connections
Drain connection: ¾" NPT
Vent and relief valve connections: ¾" NPT
Differential pressure gauge connections: ¾" NPT
Automatic air eliminator
Pressure relief valve
Differential pressure gauge
Sampling probes
Manual drain valve
Victaulic inlet and outlet connections
Inter-Lock safety device
HFG(I) STANDARD UNITS
•
•
•
•
"CE" stamp (ASME stamp as option)
Material: certified stainless steel, aluminium, carbon steel.
Design pressures: 12 bar (174 psi) — 50 ºC (122 ºF)
Paint: epoxy MIL-C-4556E (internal, in carbon steel units)
Universal primer (external, in carbon steel units)
HFG(I) OPTIONS
•
•
•
•
•
Automatic air eliminator
Differential pressure gauge
Pressure relief valve
Drain valves
Sample valves
Øa
•
•
•
•
•
•
•
c
OPTIONS
FLOW RATE
(usgpm)
Øa
b
c
HFG(I)-50-5-210
HFG(I)-100-5-220
HFG(I)-150-5-230
HFG(I)-300-10-230
HFG(I)-450-15-230
HFG(I)-600-20-230
HFG(I)-750-25-230
HFG(I)-900-30-230
HFG(I)-1050-35-230
HFG(I)-1200-40-230
50
100
150
300
450
600
750
900
1050
1200
168
168
168
273
356
356
406
406
457
457
650
889
1141
1097
1190
1190
1397
1397
1437
1437
250
250
250
267
370
370
315
315
360
360
HFG: without interlock / HFGI: with interlock
Other pressures, construction materials, quick closure on request.
Flanges and couplings: ANSI, DIN... (on request)
© 2009 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
Housings
DIMENSIONS (mm)
MODEL
www.pecofacet.com
FGH(I) STANDARD UNITS
• "CE" stamp
• Material: cast aluminium
• Design pressure: 10 bar (145 psi) — 50 ºC (122 ºF)
FGH(I) OPTIONS
•
•
•
•
•
Automatic air eliminator
Differential pressure gauge
Pressure relief valve
Drain valve
Sample valves
Øa
c
b
FLOW RATE
(usgpm)
Øa
b
c
FGH(I)-270-9-230
FGH(I)-360-12-230
FGH(I)-450-15-230
FGH(I)-600-20-230
FGH(I)-660-22-230
FGH(I)-750-25-230
FGH(I)-900-30-230
270
360
450
600
660
750
900
390
390
390
390
390
390
390
1130
1130
1130
1130
1130
1130
1130
230
230
230
230
230
230
230
FGH: without interlock / FGHI: with interlock
© 2009 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
Housings
DIMENSIONS (mm)
MODEL
www.pecofacet.com