Virtual Instrument & System
Innovation
ITK 200
Vsys Instrumentation Training Kit
•
Detachable and Modular
Instrumentation Modules
•
General Purpose I/O included
•
Integrate with over than 10 sensors
•
Adjustable console
•
Compact Size for easy carrying
and handling
•
2-units solderless breadboard
•
Programmed using LabVIEW
•
Instrumentation Module can be
attached to NI ELVIS
Overview
V-Sys Instrumentation Training Kit (ITK) is a compact
training console consists of variety sensors that is
design to simulate a real world application. ITK is
suitable for teaching sensors and transducers in
university. It works seamlessly with most of National
Instruments Data Acquisition Platform including NI
USB-DAQ, NI ELVIS and cRIO. Taking advantage of
powered by LabVIEW, user may able to customize the
program according to the application related to the
sensor.
ITK 200 available with five(5) Instrumentation
Modules that include motion sensor, humidity sensor,
touch sensor, ultrasonic sensor, force sensor and
many more. ITK also consists Traffic Light Module
that mimic T-junction traffic light system.
Main Board Features
1
Main Board– This is the heart of ITK 200 where it places standard
features that essential for laboratory experiments.
2
Solderless Bread Board – Provides an area for building circuitry
and to connect modules pin to Data Acquisition terminal.
3
5
3
1
4
2
General Purpose I/O –This is an additional laboratory components
that user can use for own applications which consists of :
i- Push button that can be used as a start/stop or on/off button
ii- Potentiometer that can use for needed of different voltage level
iii- LEDs for indicator
iv- 7-segment display for basic digital display to up to number 99.
4
Module Indicator – This is a power LED that will lights up
when modules is connected
5
Header –
This is a D-Sub connector
Instrumentation Moduels to the Main Board
that connects
Use ITK 200 Modules with NI ELVIS II
Every ITK 200 Instrumentation Modules are modular
and detachable so that easy to detach from the
platform and attach to other NI DAQ Device
including NI ELVIS.
The Instrumentation Modules are not limited to be
used only with ITK 200. Taking advantage of
detachable approach, the same Instrumentation
Module can be used with NI ELVIS II Workstation.
Simply unplug the Instrumentation Module from the
ITK 200 Main Board and place the Instrumentation
Module on the NI ELVIS II Prototyping Board to let
your Instrumentation Module works with NI ELVIS II.
ITK200 with NI ELVIS and Process Flow Mini Plant
ITK 200 Modules Features
Analog Module (ITK-AM-202)
Digital Module (ITK-DM-202)
 Measure
temperature
 Detect nearby object
via reflected infrared
signal
 Detect movement
 Distance
measurement
Traffic Light Module (ITK-TLM-201)
Traffic Light Module is
designed
based on
Traffic Light System at
T-junction. Pedestrian
traffic
light operates
based on switch button.
Two automatic street
 T-junction Traffic Light
lights activate
System
depending on
 1 Pedestrian Traffic Light
phototransistor output
 2 Automatic Street Light
signal.
 Sense motion

Determine rotation
and its direction
 Low power
consumption
infrared remote
control system
Human Interface Module (ITK-HIM-202)
 Angle Displacement
Measurement
 Determine Linear
Position
 Measure force applied
to an object
Process Control Module (ITK-PCM-202)
NEW
Control Module (ITK-CM-202)
NEW
Control Module is a fully
functional
model solar
tracker
that
used to
demonstrate
solar tracker
principe. This is a dual axis
solar tracker design with a
joystick to
control the
rotation of two servo motors
in open loop mode. It can
also be operated in closedloop
mode,
where it
is control via software which
user need to program its
feedback output from the
photo detectors. Replacing
the existing plate with a mini
solar cell to the control
module will create a solar
mini power station.
Process Control Module (PCM) is a VSys ITK200
Module that is proposed to be used for Control
System. This PCM is a universal module that is
suitable for teaching Open Loop and Closed Loop
System. Couple this PCM with Process Flow Plant
(PFM) enables student to learn how control system is
applied on a valve to control a water level in two tank.
This PFM and PCM demonstrate the water level
controller. A limit switch is attach to each tank to
measure the water level . This will trigger the valve to
on and off.
C-506 Block C, Kelana Square, No.17, Jalan SS7/26, 47301 Kelana Jaya,Petaling Jaya, Selangor
03-78865663 Fax: 03-78865664 www.visi.com.my
VSys ITK200 Suite
To help tutors and trainers
for easy use of ITK200,
ITK200 comes with ITK 200
Suite. ITK200 Suite enable
user to straight away get
signal from sensor without
develop their own VI. User
will also get a sample
laboratory courseware for
each
modules when
purchase
the
ITK 200
modules.
Connect ITK Module to NI MyDAQ & MyRIO
•Connect VSys ITK200 Module directly with
NI MyDAQ by using VSys ITK200 MyDAQtor
enables to use NI MyDAQ as the DAQ Device
for the VSys ITK200 Modules.
•Wire ITK200 Module Terminal Pin to the NI
MyDAQ respective Input/Output channel.
•Write your program using LabVIEW or run
the ITK200 Suite.
NEW
Related Engineering Courses
•
•
•
•
•
Process Control & Instrumentation
Industrial Automation
Industrial Instrumentation
Robotics & Automation
Mechatronics
•
•
•
•
Medical Instrumentation
Biomechanics
Mechanical Vibration
Computerized Electronic
Instrumentation
VIRTUAL INSTRUMENT &
SYSTEM INNOVATION SDN BHD
C-506 Block C, Kelana Square,
No.17, Jalan SS7/26,
47301 Kelana Jaya,
Petaling Jaya, Selangor
Phone: +603.7886.5663
Fax: +603.7886.5664
Email: info@visi.com.my
www.visi.com.my 4
www.facebook.com/visisdnbhd