FRAME 80 T5
h
3“ wide extruded profile made of aluminum, powder coated
white or anodized aluminium. Suitable for installation in
plaster, tile or accoustic ceilings 5/16“ - 1“
114
Enhanced glare control through snap in shielding
HPO-High Performance Opal cover for uniform illumination
and increased light transmission. Use optional reflector for
63 lm/W and a total light fixture efficiency of η = 75%
Optional microprismatic cover for enhanced light output and
optional parabolic darklight louver for glare-free illumination
Additional internal MIRO 4 reflector with 98% reflectivity
made of 99.9% super purity aluminum used with opal and
prismatic cover option
T5 lamps with various voltage, dimming and emergency
options available
2 ft. T5 inset equipped with either 14W HE or 24W HO ballasts
3 ft. T5 inset equipped with either 21W HE or 39W HO ballasts
4 ft. T5 inset equipped with either 28W HE or 54W HO ballasts
5 ft. T5 inset equipped with either 35W HE or 80W HO ballasts
RANGE
MOUNTING LAMPING
N214
_ _ _ _ -1
__
ELECTRICALSHIELDING FINISH
_ _ -_
-_ _ _ -_ _ 0
_
-_ 0
DIMENSION
- _0 _ _ _
SERIES
INSTALLATION
TYPE
VOLTAGE
COVER
COLOR
OFFSET
FRAME 80 T5
1 _ linear
1 _ _ 1 lamp T5 regular
cross section
2 _ _ 1 lamp T5 offset
cross section
3___
6___
7___
91__
H
P
J
L
6 _ anodized
aluminium
7 _ white
LAMP
DIMMING
_1_
_2_
71 _ _
7H _ _
7D _ _
7S _ _
7T _ _
7U_ _
_ M_ _
_N__
0 2 2 5 22 1/2‘‘
2‘ T5
0 3 4 5 34 1/2‘‘
3‘ T5
0 4 6 5 46 1/2‘‘
4‘ T5
0 5 8 0 58‘‘
5‘ T5
0 6 4 5 64 1/2‘‘ 3‘+3‘ T5
0 7 6 0 76‘‘
3‘+4‘ T5
0 8 8 0 88‘‘
4‘+4‘ T5
x x x 0 custom length
TRIM
_ 2 sheet rock
_ J 15/16 flat t-grid
_ K 9/16 flat t-grid or
9/16 screw slot
t-grid
1
20V (Mark 7 | 10)
277V (Mark 7 | 10)
120 | 277V UNV
347V (non dim)
HP opal
microprismatic
jut-out
louver
louver for regular only
HE
standard output
HO
high output
REFLECTOR
_ _ 1 without reflector
_ _ 2 with reflector
reflector option for HP opal
and microprismatic only
no dimming
i-lume 3D (1%) 3-wire hot dim
H
H
i-lume 3D (1%) digital dim
EcoSystem H-Series (1%) digital dim
EcoSystem (10%) 3-wire hot dim
EcoSystem (10%) digital dim
M
ark 7 (1% HO | 5% HE) 0-10V
Mark 10 (1%) hot dim
REGULAR
0 3 4 5 34 1/2‘‘
3‘ T5
0 4 6 5 46 1/2‘‘
4‘ T5
0 6 9 0 69‘‘
3‘+3‘ T5
0 8 0 5 80 1/2‘‘ 3‘+4‘ T5
0 9 2 5 92 1/2‘‘ 4‘+4‘ T5
x x x 0 custom length
EMERGENCY
___0 n
o emergency
_ _ _ # number of 90 min. emergency battery pack
_ _ _C emergency circuit
emergency battery pack only available for non-dim fixtures >3’
for dimmable fixtures, please consult factory
10 Business Day QuickShip items
The overall fixture length is the channel length plus 3/16‘‘ in total for two endcaps
BX CABLE
(BY OTHERS)
4 3/16"
3 1/4"
DRAWING
For custom lengths
from 23‘‘ to max. 500‘‘
see our light system
configurator at
systems.xalusa.com
FIXTURE LENGTH | CUTOUT CALCULATION
L 22 11/16" | 34 11/16" | 46 11/16"
FIXTURE LENGTH
3 1/2"
L total =
3 1/2"
L channel + 3/16‘‘
CUTOUT
2 5/8"
3"
L 58 3/16" | 64 11/16" | 69 3/16" | 76 3/16" | 80 11/16"
L total
- 80‘‘
- 160‘‘
- 240‘‘
- 320‘‘
L ch =
L ch + 3/8‘‘
L ch + 3/8‘‘
L ch + 3/8‘‘
L ch + 3/8‘‘
L /2 - 1 3/8"
3 1/2"
4 1/4"
3 1/2"
3 5/16"
GRID SPACING
LIGHT OUTPUT RATIO
FRAME 80 HE T5 28W 8.2W|ft
HP opal
microprismatic
lm|ft
louver
L 88 3/16" | 92 11/16"
(L - 7 1/2") x 1/3 + 3 1/2"
(L - 7 1/2") x 1/3
3 1/2"
3 1/2"
50lm|W 63lm|W 49lm|W 60lm|W 58lm|W
η 60% η 75% η 59% η 72%
η 69%
600
550
500
450
400
350
w
ithout reflector
with reflector
without reflector
with reflector
SHIELDING
REGULAR
H
4 9/16"
P
J
L
H HP opal
P microprismatic
J jut-out
L louver
FINISH
6 anodized aluminium
7 white
OFFSET
6
7