Zero-Drift, Single-Supply, Rail-to-Rail
Input/Output Operational Amplifiers
AD8551/AD8552/AD8554
PIN CONFIGURATIONS
This family of amplifiers has ultralow offset, drift, and bias
current. The AD8551, AD8552, and AD8554 are single, dual,
and quad amplifiers featuring rail-to-rail input and output swings.
All are guaranteed to operate from 2.7 V to 5 V with a single supply.
The AD855x family provides the benefits previously found only
in expensive auto-zeroing or chopper-stabilized amplifiers.
Using Analog Devices, Inc. topology, these new zero-drift
amplifiers combine low cost with high accuracy. No external
capacitors are required.
With an offset voltage of only 1 μV and drift of 0.005 μV/°C, the
AD855x are perfectly suited for applications in which error
sources cannot be tolerated. Temperature, position and pressure
sensors, medical equipment, and strain gage amplifiers benefit
greatly from nearly zero drift over their operating temperature
range. The rail-to-rail input and output swings provided by the
AD855x family make both high-side and low-side sensing easy.
The AD855x family is specified for the extended industrial/auto
motive temperature range (−40°C to +125°C). The AD8551
single amplifier is available in 8-lead MSOP and 8-lead narrow
SOIC packages. The AD8552 dual amplifier is available in 8-lead
narrow SOIC and 8-lead TSSOP surface-mount packages. The
AD8554 quad is available in 14-lead narrow SOIC and 14-lead
TSSOP packages.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
4
5
01101-001
NC
V+
OUT A
NC
Figure 1. 8-Lead MSOP (RM Suffix)
8 NC
+IN A 3
AD8551
V– 4
7 V+
6 OUT A
5 NC
NC = NO CONNECT
01101-002
NC 1
–IN A 2
OUT A
–IN A
+IN A
V–
1
8
AD8552
4
5
V+
OUT B
–IN B
+IN B
01101-003
Figure 2. 8-Lead SOIC (R Suffix)
Figure 3. 8-Lead TSSOP (RU Suffix)
OUT A 1
–IN A 2
+IN A 3
8 V+
AD8552
V– 4
7 OUT B
6 –IN B
5 +IN B
01101-004
GENERAL DESCRIPTION
8
AD8551
NC = NO CONNECT
APPLICATIONS
Temperature sensors
Pressure sensors
Precision current sensing
Strain gage amplifiers
Medical instrumentation
Thermocouple amplifiers
1
NC
–IN A
+IN A
V–
Figure 4. 8-Lead SOIC (R Suffix)
OUT A
–IN A
+IN A
V+
+IN B
–IN B
OUT B
1
14
AD8554
7
8
OUT D
–IN D
+IN D
V–
+IN C
–IN C
OUT C
01101-005
Low offset voltage: 1 μV
Input offset drift: 0.005 μV/°C
Rail-to-rail input and output swing
5 V/2.7 V single-supply operation
High gain, CMRR, PSRR: 130 dB
Ultralow input bias current: 20 pA
Low supply current: 700 μA/op amp
Overload recovery time: 50 μs
No external capacitors required
Figure 5. 14-Lead TSSOP (RU Suffix)
OUT A 1
14 OUT D
–IN A 2
13 –IN D
+IN A 3
V+ 4
12 +IN D
AD8554
11 V–
+IN B 5
10 +IN C
–IN B 6
9 –IN C
OUT B 7
8 OUT C
01101-006
FEATURES
Figure 6. 14-Lead SOIC (R Suffix)
©1999–2008 Analog Devices, Inc. All rights reserved.
AD8551/AD8552/AD8554
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
VS = 5 V, VCM = 2.5 V, VO = 2.5 V, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
Min
VOS
Typ
Max
Unit
1
5
10
50
1.5
300
4
70
200
150
400
5
μV
μV
pA
nA
pA
nA
pA
pA
pA
pA
V
dB
dB
dB
dB
μV/°C
−40°C ≤ TA ≤ +125°C
Input Bias Current
AD8551/AD8554
AD8552
AD8552
Input Offset Current
AD8551/AD8554
AD8552
AD8552
Input Voltage Range
Common-Mode Rejection Ratio
Large Signal Voltage Gain 1
Offset Voltage Drift
OUTPUT CHARACTERISTICS
Output Voltage High
IB
10
1.0
160
2.5
20
150
30
150
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
IOS
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
CMRR
AVO
ΔVOS/ΔT
VOH
Output Voltage Low
VOL
Output Short-Circuit Limit Current
ISC
VCM = 0 V to +5 V
−40°C ≤ TA ≤ +125°C
RL = 10 kΩ, VO = 0.3 V to 4.7 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
RL = 100 kΩ to GND
RL = 100 kΩ to GND @ −40°C to +125°C
RL = 10 kΩ to GND
RL = 10 kΩ to GND @ −40°C to +125°C
RL = 100 kΩ to V+
RL = 100 kΩ to V+ @ −40°C to +125°C
RL = 10 kΩ to V+
RL = 10 kΩ to V+ @ −40°C to +125°C
0
120
115
125
120
4.99
4.99
4.95
4.95
±25
−40°C to +125°C
Output Current
IO
−40°C to +125°C
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Overload Recovery Time
Gain Bandwidth Product
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
1
PSRR
ISY
SR
VS = 2.7 V to 5.5 V
−40°C ≤ TA ≤ +125°C
VO = 0 V
−40°C ≤ TA ≤ +125°C
RL = 10 kΩ
GBP
en p-p
en p-p
en
in
0 Hz to 10 Hz
0 Hz to 1 Hz
f = 1 kHz
f = 10 Hz
Gain testing is dependent upon test bandwidth.
Rev. D | Page 3 of 24
120
115
140
130
145
135
0.005
4.998
4.997
4.98
4.975
1
2
10
15
±50
±40
±30
±15
130
130
850
1000
0.4
0.05
1.5
1.0
0.32
42
2
0.04
10
10
30
30
975
1075
0.3
V
V
V
V
mV
mV
mV
mV
mA
mA
mA
mA
dB
dB
μA
μA
V/μs
ms
MHz
μV p-p
μV p-p
nV/√Hz
fA/√Hz
AD8551/AD8552/AD8554
VS = 2.7 V, VCM = 1.35 V, VO = 1.35 V, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
Min
VOS
Typ
Max
Unit
1
5
10
50
1.5
300
4
50
200
150
400
2.7
μV
μV
pA
nA
pA
nA
pA
pA
pA
pA
V
dB
dB
dB
dB
μV/°C
−40°C ≤ TA ≤ +125°C
Input Bias Current
AD8551/AD8554
AD8552
AD8552
Input Offset Current
AD8551/AD8554
AD8552
AD8552
Input Voltage Range
Common-Mode Rejection Ratio
Large Signal Voltage Gain 1
Offset Voltage Drift
OUTPUT CHARACTERISTICS
Output Voltage High
IB
10
1.0
160
2.5
10
150
30
150
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
IOS
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +85°C
−40°C ≤ TA ≤ +125°C
CMRR
AVO
ΔVOS/ΔT
VOH
Output Voltage Low
VOL
Short-Circuit Limit
ISC
VCM = 0 V to 2.7 V
−40°C ≤ TA ≤ +125°C
RL = 10 kΩ, VO = 0.3 V to 2.4 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
RL = 100 kΩ to GND
RL = 100 kΩ to GND @ −40°C to +125°C
RL = 10 kΩ to GND
RL = 10 kΩ to GND @ −40°C to +125°C
RL = 100 kΩ to V+
RL = 100 kΩ to V+ @ −40°C to +125°C
RL = 10 kΩ to V+
RL = 10 kΩ to V+ @ −40°C to +125°C
0
115
110
110
105
2.685
2.685
2.67
2.67
±10
−40°C to +125°C
Output Current
IO
−40°C to +125°C
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Overload Recovery Time
Gain Bandwidth Product
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
1
PSRR
ISY
SR
VS = 2.7 V to 5.5 V
−40°C ≤ TA ≤ +125°C
VO = 0 V
−40°C ≤ TA ≤ +125°C
2.697
2.696
2.68
2.675
1
2
10
15
±15
±10
±10
±5
130
130
750
950
0.04
10
10
20
20
900
1000
V
V
V
V
mV
mV
mV
mV
mA
mA
mA
mA
dB
dB
μA
μA
RL = 10 kΩ
0.5
0.05
1
V/μs
ms
MHz
0 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
1.6
75
2
μV p-p
nV/√Hz
fA/√Hz
GBP
en p-p
en
in
120
115
130
130
140
130
0.005
Gain testing is dependent upon test bandwidth.
Rev. D | Page 4 of 24
AD8551/AD8552/AD8554
ABSOLUTE MAXIMUM RATINGS
THERMAL CHARACTERISTICS
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage1
ESD (Human Body Model)
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature Range (Soldering, 60 sec)
1
Rating
6V
GND to VS + 0.3 V
±5.0 V
2000 V
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Table 4.
Package Type
8-Lead MSOP (RM)
8-Lead TSSOP (RU)
8-Lead SOIC (R)
14-Lead TSSOP (RU)
14-Lead SOIC (R)
ESD CAUTION
Differential input voltage is limited to ±5.0 V or the supply voltage,
whichever is less.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. D | Page 5 of 24
θJA
190
240
158
180
120
θJC
44
43
43
36
36
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
AD8551/AD8552/AD8554
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
3.20
3.00
2.80
3.20
3.00
2.80
1
6.20 (0.2441)
5.80 (0.2284)
4
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
0.65 BSC
0.95
0.85
0.75
0.38
0.22
0.80
0.60
0.40
8°
0°
0.23
0.08
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
SEATING
PLANE
1.10 MAX
COPLANARITY
0.10
5
1
4
PIN 1
0.15
0.00
8
4.00 (0.1574)
3.80 (0.1497)
5.15
4.90
4.65
5
0.50 (0.0196)
0.25 (0.0099)
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-A A
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
SEATING
PLANE
012407-A
8
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 73. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Figure 71. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
5.10
5.00
4.90
3.10
3.00
2.90
14
8
5
4.50
4.40
4.30
1
8
4.50
4.40
4.30
6.40 BSC
6.40
BSC
1
4
7
PIN 1
PIN 1
0.65 BSC
1.20
MAX
COPLANARITY
0.10
0.30
0.19
SEATING 0.20
PLANE
0.09
8°
0°
1.20
MAX
0.15
0.05
COPLANARITY
0.10
0.75
0.60
0.45
COMPLIANT TO JEDEC STANDARDS MO-153-AA
0.20
0.09
SEATING
PLANE
0.30
0.19
Figure 74. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
8.75 (0.3445)
8.55 (0.3366)
4.00 (0.1575)
3.80 (0.1496)
8
14
1
7
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
0.51 (0.0201)
0.31 (0.0122)
8°
0°
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 72. 8-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-8)
Dimensions shown in millimeters
6.20 (0.2441)
5.80 (0.2283)
0.50 (0.0197)
0.25 (0.0098)
1.75 (0.0689)
1.35 (0.0531)
SEATING
PLANE
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 75. 14-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-14)
Dimensions shown in millimeters and (inches)
Rev. D | Page 22 of 24
060606-A
0.15
0.05
1.05
1.00
0.80
0.75
0.60
0.45
061908-A
0.65 BSC
AD8551/AD8552/AD8554
ORDERING GUIDE
Model
AD8551AR
AD8551AR-REEL
AD8551AR-REEL7
AD8551ARZ 1
AD8551ARZ-REEL1
AD8551ARZ-REEL71
AD8551ARM-R2
AD8551ARM-REEL
AD8551ARMZ1
AD8551ARMZ-R21
AD8551ARMZ-REEL1
AD8552AR
AD8552AR-REEL
AD8552AR-REEL7
AD8552ARZ1
AD8552ARZ-REEL1
AD8552ARZ-REEL71
AD8552ARU
AD8552ARU-REEL
AD8552ARUZ1
AD8552ARUZ-REEL1
AD8554AR
AD8554AR-REEL
AD8554AR-REEL7
AD8554ARZ1
AD8554ARZ-REEL1
AD8554ARZ-REEL71
AD8554ARU
AD8554ARU-REEL
AD8554ARUZ1
AD8554ARUZ-REEL1
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead TSSOP
8-Lead TSSOP
8-Lead TSSOP
8-Lead TSSOP
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead TSSOP
14-Lead TSSOP
14-Lead TSSOP
14-Lead TSSOP
Z = RoHS Compliant Part, # denotes RoHS compliant part may be top or bottom marked.
Rev. D | Page 23 of 24
Package Option
R-8
R-8
R-8
R-8
R-8
R-8
RM-8
RM-8
RM-8
RM-8
RM-8
R-8
R-8
R-8
R-8
R-8
R-8
RU-8
RU-8
RU-8
RU-8
R-14
R-14
R-14
R-14
R-14
R-14
RU-14
RU-14
RU-14
RU-14
Branding
AHA
AHA
AHA#
AHA#
AHA#