ALEXANDRA
R
L I G H T I N G
S Y S T E M S ,
I N C .
•MR 16 Recessed Light
Fixture
•Hot Aiming Feature - No
Burned Fingers
33A-16 SERIES
Type: ________
Number of Lamps
One Lamp
Two Lamps
Three Lamps
○○
○○
○○
Color
Black Powder Coat
White Powder Coat
○○
○○
•One, Two, and Three
Lamp Units
Optional Lenses
Clear (Standard)
Frosted
Black Honeycomb Louver
Silver Honeycomb Louver
•12 Volt
○○
○○
○○
○○
•Integral Transformer
•Individual Lamps Rotate
and Tilt - 360 Degree
Coverage
Optional Lamps
Beam Spread
Color - Specify
Custom_______________
○○
○○
○○
•Service From Inside Room
•Made In the USA
Trim
Internal Trim
External Trim
Trimless
○○
○○
○○
SPECIFICATION GUIDE: 33A16MR162TLB
NUMBER OF
FIXTURE
TRIM
COLOR
DESIGNATION:
LAMP TYPE
LAMPS
SERIES
TL
B
MR16
2
SAMPLE SPECIFICATION:
33A-16
DESCRIPTION EXAMPLE: Alexandra Series 33A-16 with two MR16 lamps, trimless, black powder coat finish.
ACCESSIBILITY: All fixtures can be fully serviced from inside the
room.
LAMPS: Fixtures are designed to utilize MR16 lamps. Maximum
wattage per lamp is 50 watts. Lamps are not included but may be
specified as an option.
APPLICATIONS: Dry or damp location rated; wall, ceiling or cove
surface mounting. or integral transformer; a full range of lighting
possibilities.
LENSES: The lamp head assembly is configured to allow use of a
mixture of two lenses or louver. Optional.
COLOR/FINISH: Black or white powder coat finish is standard.
Standard custom colors may be specified at no additional cost.
Please consult the factory.
MOUNTING: Main housing assembly is designed to utilize
conventional adjustable hanger brackets. Adjustability is built into
the housing to allow exact placement of the fixture.
CONSTRUCTION/INSTALLATION:
• Adjustable Alignment - Final alignment of aperature and trim is
made after main housing is permanently set/installed.
• Light weight aluminum construction - only 12 pounds for 3
lamp fixture.
• Adjustable for 1/2”, 5/8”, or 3/4” thick sheetrock - then firmly
locked in place.
TRANSFORMERS: 12 volt electronic transformers are integral to the
fixture and are thermally protected. Input 120 volts. Transformers
are dimmable using two-wire controls.
TRIM:
• Trimless (TL) 4” wide aperature
• Internal (IT) 2” wide aperature
• External (ET) 4” wide aperature
DESCRIPTION: Alexandra Series 33A-16, for MR16 lamps.
HOT AIMING: Lamps can be fully rotated and tilted for precise
aiming, while fixture is on and hot, without burned fingers as on
most conventional MR16 recessed fixtures.
• Rotation of 370 degrees - No blind spot
• Offset Tilt Function - Included angle of 60 degrees with
minimal light striking the housing. More light out -- less heat.
• Selected position is firmly locked in place.
WARRANTY: One year limited, conditional on the use of Alexandra
Lighting Systems, Inc. supplied ballast(s) and installed in accordance
with Alexandra Lighting Systems’ installation instructions, the
National Electric Codes and/or any prevailing local codes.
VOLTAGE: 120 volts.
3920 NORTH NEVADA AVENUE - COLORADO SPRINGS, CO 80907 TEL: 719.548.8805/800.833.0540 FAX: 719.260.7929 e-MAIL: info@alexandralightingsystems.com
All product illus trations are based on current information at the time of publication. Alexandra Lighting Sys tems, Inc. reser ves the right to make changes without notice or obligation in
prices, specif ications, colors, and materials, and to change or discontinue models. Call for lates t information. Par t subs titution voids all warranties. 2009 Alexandra Lighting Sys tems, Inc.
$1.00
rev.33A -16/06/12
ALEXANDRA
®
L I G H T I N G
S Y S T E M S ,
I N C .
33A-16 SERIES
Type: ________
FIXTURE DETAIL
5
7
1
Main Housing
2
End adjustable mounting brackets
3
Side adjustable mounting brackets
4
“Butterfly flanges” for standard joist bar
5
1/2” KO for power feed
6
Adjustment (4ea.) for ceiling thickness
1/2”, 5/8”, 3/4”
2
3
4
1
9
7
Air vents
8
Lighting assemble
9
Adjustment (4ea.) for final alignment
of lighting assembly and aperature
10 Trim:
IT -Internal Trim (shown)
TL -Trimless (Item 10 removed)
ET -External trim flange (not shown)
8
10
11 Perforated metal mud/drywall ring (not shown.)
11
6
FIXTURE CROSS SECTION
CEILING CLOSURE DETAILS
Adjustable for ceiling thickness
Perforated mud flange
FIXTURE DIMENSIONS
1 Lamp
2 Lamp
3 Lamp
WIDTH
LENGTH
HEIGHT
7”
7”
7”
13 1/2”
24”
24”
6“
6”
6”
APERATURE
INTERNAL
EXTERNAL TRIM
& TRIMLESS
2”x 3-1/4”
4” x 5-1/4”
2” x 8-1/2”
4” x 10-1/2”
2” x 13-3/4”
4” x 15-3/4”
3920 NORTH NEVADA AVENUE - COLORADO SPRINGS, CO 80907 TEL: 719.548.8805/800.833.0540 FAX: 719.260.7929 e-MAIL: info@alexandralightingsystems.com
All product illus trations are based on current information at the time of publication. Alexandra Lighting Sys tems, Inc. reser ves the right to make changes without notice or obligation in
prices, specif ications, colors, and materials, and to change or discontinue models. Call for lates t information. Par t subs titution voids all warranties. 2009 Alexandra Lighting Sys tems, Inc.
$1.00
rev.33A -16/06/12