PRAGATI ENGINEERING COLLEGE
(Approved by AICTE, Permanently Affiliated to JNTUK Kakinada & Accredited by NBA)
1-378, ADB Road, Surampalem – 533 437, Near Peddapuram, E.G.Dist., A.P.
Ph: (08852) – 252233, 252234, 252235 Fax: (08852) – 252232
DEPARTMENT OF MECHANICAL ENGINEERING
RESEARCH PUBLICATIONS IN NATIONAL/INTERNATIONAL JOURNALS
(2015-2016)
1. Dr S.Sambhu Prasad, Mr G.Satish and Mr G.Panduranga have published a paper
entitled “Comparison of flow analysis through sudden contraction and enlargement of
pipes by providing smooth corners” in International Journal of Engineering Trends and
Technology (IJETT) during July-2015. ISSN: 2231-5381 Page No: 205-211.volume 25
number-4. http://ijettjournal.org/2015/volume-25/number-4/IJETT-V25P238.pdf
2. Dr S.Sambhu Prasad and Mr G.Panduranga have published a paper entitled “ Stress
and Displacement Analysis of Rectangular Stainless Steel Plate with Elliptical Cut-out of
Different Orientation” in International Journal of Engineering Research and General
Science (IJEPGS) during July-August, 2015. ISSN 2091-2730. Page No: 121-126 Volume
3, Issue 4, Part-2 http://pnrsolution.org/Datacenter/Vol3/Issue4/165.pdf
3. Mr G.Panduranga and Mr P.Sukumar have published a paper entitled “Buckling
Analysis of Column Made of 4140 Alloy Steel with Different Cross Sections in Fixed
Free Condition” in International Journal of Modern Trends in Engineering and Research
(IJMTER) during August 2015. ISSN (Online):2349–9745; Page No: 93-100 Volume 02,
Issue 08.
http://www.ijmter.com/papers/volume-2/issue-8/buckling-analysis-of-column-made-of4140-alloy-steel-with-different-cr.pdf
4. Dr. S. Sambhu Prasad have published a paper entitled “Finite Element Modeling And
Analysis of Nozzle Local Loads of Spherical Pressure Vessel Subjected to Internal
Pressure” in IUP Journal of Mechanical Engineering publications (A Division of ICFAI)
during November 2015. Page No: 24-42 Volume 03. No.4.
http://www.iupindia.in/1511/Mechanical%20Engineering/Finite_Element_Modeling.html
5. Mr G.Avinash and Mr S.Srikanth have published a paper entitled “Structural Analysis
of A Car Chassis By Using E-Glass Epoxy and Kevlar Composites” in International
Journal for Science and Advance Research In Technology (IJSART) during December
2015. ISSN [ONLINE]: 2395-1052 Page No: 159-163 Volume 01, Issue 12.
http://www.ijsart.com/pdf_up/26ijsart_150101609.pdf
PRAGATI ENGINEERING COLLEGE
(Approved by AICTE, Permanently Affiliated to JNTUK Kakinada & Accredited by NBA)
1-378, ADB Road, Surampalem – 533 437, Near Peddapuram, E.G.Dist., A.P.
Ph: (08852) – 252233, 252234, 252235 Fax: (08852) – 252232
DEPARTMENT OF MECHANICAL ENGINEERING
6. Mrs Ch.Vasantha Lakshmi have published a paper entitled “Design and structural
analysis of composite coated clutch plate by using composite materials” in International
Journal & Magazine of Engineering, Technology, Management and Research(IJMETMR)
during December 2015 . ISSN: 2348-4845 Page No: 1639-1643 Volume 02, Issue 12.
http://www.ijmetmr.com/oldecember2015/SandhyaRaniV-ChVasanthaLakshmi-A-142.pdf
7. Mr D.J.Johnson have published a paper entitled “Structural And Modal Analysis Of
Different Roll Cage Models In On-Road Transport Vehicle” in International Research
Journal of Engineering And Technology (IRJET) during December2015. ISSN: 23950056 Page No: 667-673 Volume 02, Issue 09. S.No: 110
https://www.irjet.net/vol-2-issue-9
8. Mr. G.Panduranga has published a paper entitled “Selection of Suitable Lubricant for
the Hydrodynamic Journal Bearing at Different Loads in Machine Tool Applications "
in International Journal for Science and Advance Research In Technology
(IJSART), ISSN [ONLINE]: 2395-1052, Volume 2 Issue 1 –January 2016.
http://www.ijsart.com/pdf_up/493ijsart_150101697.pdf
9.Dr. S. Sambhu Prasad has published a paper entitled “Structural Analysis of Large
Ethane Storage Sphere for Design Pressure and Seismic Loads” in IUP Journal of
Mechanical Engineering publications (A Division of ICFAI) during February 2016.
http://www.iupindia.in/1602/Mechanical%20Engineering/Structural_Analysis.html