Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
2.75 in (70 mm)
Product family features
Full family of controls plus matching fan controls,
switches, and wiring devices
•
Exclusive dimmer/switch size opening
•
Slide adjusts light to suit any activity
•
Classic slider, thin profile design
•
Voltage compensation maintains stable light
levels, despite line voltage variations
•
4.56 in (116 mm)
Mechanical air-gap to disconnect load power
•
100% factory tested
•
Coordinating wallplate included with
Architectural matte finish controls; metal
wallplates only available separately
•
Custom engraving and custom coloring
available for wallplates, see pg. 164
•
Control types
.30 in
(7.6 mm)
profile
Shown actual size: Nova Tb dimmer in
Black (BL) with 1-gang Architectural wallplate in
Clear Anodized Aluminum (CLA).
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Load types requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage, and
capacity combinations.
For additional information, see pg. 185.
Download specification submittal
25
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Available finishes
Use BOLD color code in model number (Example: NT-600-SI)
Architectural matte finishes*
WH
White
LA
Light Almond
AL
Almond
BE
Beige
GR
Gray
SI
Sienna
BR
Brown
BL
Black
IV
Ivory
TP
Taupe
QZ
Antique Bronze
Architectural metal finish wallplates**
BN
Bright Nickel
BC
CLA
SC
Bright Chrome Clear Anodized Satin Chrome
Aluminum
SN
Satin Nickel
AU
Gold Plated
BB
Bright Brass
QB
BLA
Antique Brass Black Anodized
Aluminum
BRA
SB
Brass Anodized Satin Brass
Aluminum
*Coordinating wallplate included with Architectural matte controls.
**Metal finish wallplates only available separately and include black plastic trim/adapter, visible from side.
Match with separate Black (BL) controls. For wallplate information, see pg. 161.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
26
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Electronic low-voltage dimmers*
(small controls)
Slide-to-off dimmers
Slide up to brighten,
down to dim
•
Loads from
1000-2000 Watts
require large controls
•
Slide-to-off dimmers
Single-pole
120 V 300 W
Single-pole
120 V 600 W
NTELV-300-XX1
NTELV-600-XX1
Certain LED drivers are dimmable using
an ELV dimmer; for more information visit
www.lutron.com/LED.
Incandescent/halogen dimmers
(small controls)
3-wire fluorescent dimmers*
(also for Hi-lume® A-Series LED drivers)
(small controls)
Slide-to-off dimmers
Single-poleNT-600-XX1
120 V 600 W
Single-poleNT-1000-XX1
120 V 1000 W
Slide-to-off dimmers
Magnetic low-voltage dimmers
(small controls)
For use with EcoSystem®, Hi-lume 3D and
Hi‑lume ballasts, and Hi-lume A-Series LED drivers.
Slide-to-off dimmers
No derating required if ganged.
Single-poleNTLV-600-XX1
120 V 600 VA (450 W)
Single-poleNTLV-1000-XX1
120 V 1000 VA (800 W)
Single-pole*NTLV-600-277-XX1
277 V 600 VA (450 W)
Single-pole*NTLV-1000-277-XX1
277 V 1000 VA (800 W)
Adjustable low-end trim.
For more information on Hi-lume A-Series LED
drivers, visit www.lutron.com/HilumeLED.
Single-poleNTF-10-XX1
120 V 16 A
Single-poleNTF-10-277-XX1
277 V 8 A
The stated VA (Volt-Ampere) rating includes the
magnetic transformer heat losses and the lamp
load. The stated W (Watt) rating is the maximum
lamp wattage based on assumed 20%
transformer loss.
27
XX1:Architectural matte color codes, see pg. 26
(1-gang wallplate included)
Volume 1 P/N 367-1746 REV B
All models must be derated if ganged, unless
otherwise noted, see pg. 179.
*Requires neutral wire connection.
www.lutron.com/specificationguide | 1.800.523.9466 |
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
0-10 V fluorescent dimmer (current sink control)
(also for 0-10 V LED drivers)
(small control)
Slide-to-off dimmers
Higher capacity
dimmers require
larger heat sink
behind wallplate
•
Slide-to-off dimmer
Single-poleNTFTV-XX1
30 mA max control current
Slide up to brighten,
down to dim
•
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
Power Pack: PP-120H, PP-277H, or PP-347H.
Measures
4.56 in x 4.56 in
•
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
Requires large
wallplate
•
Most can fit in a
1-gang electrical
backbox
•
For information on using Lutron dimmers to
control Advance Mark 7 dimming ballasts, visit
www.lutron.com/advance; Universal dimming
ballasts, visit www.lutron.com/universal.
No derating required if ganged.
For compatible 0-10 V LED drivers by others, visit
www.lutron.com/LED.
Tu-Wire® fluorescent dimmers
(small controls)
Slide-to-off dimmers
Single-poleNTFTU-5A-XX1
120 V 5 A
Single-pole*NTFTU-5A-277-XX1
277 V 5 A
Also compatible with Advance Mark 10
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466; Universal dimming ballasts
visit www.lutron.com/universal.
XX1:Architectural matte color codes, see pg. 26
(1-gang wallplate included)
Incandescent/halogen dimmers
(large controls)
Slide-to-off dimmers
Single-poleNT-1500-XX1
120 V 1500 W
Single-poleNT-2000-XX1
120 V 1920 W
NT-2000 dimmers must be ganged with no fins broken. See ganging and derating on pg. 179 for further information.
NT-2000 requires a 2-gang electrical backbox.
Magnetic low-voltage dimmers
(large controls)
Slide-to-off dimmers
Single-poleNTLV-1500-XX1
1500 VA (1200 W)
The stated VA (Volt-Ampere) rating includes the
magnetic transformer heat losses and the lamp
load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20%
transformer loss.
All models must be derated if ganged, unless
otherwise noted, see pg. 179.
*Requires neutral wire connection.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
28
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Preset dimmers
Button turns on/off to
slider level
•
Slide up to brighten,
down to dim
•
Loads from
1000-1500 watts
require large controls
•
Incandescent/halogen dimmers
(small controls)
3-wire fluorescent dimmers*
(also for Hi-lume® A-Series LED drivers)
(small controls)
Preset dimmers
3-wayNTF-103P-XX1
120 V 8A
3-wayNTF-103P-277-XX1
277 V 6A
For use with EcoSystem®, Hi-lume 3D and
Hi‑lume ballasts, and Hi-lume A-Series
LED drivers.
No derating required if ganged.
Adjustable low-end trim.
Preset dimmers
3-way/single-poleNT-603P-XX1
120 V 600 W
3-way/single-poleNT-1003P-XX1
120 V 1000 W
For more information on Hi-lume A-Series LED
drivers, visit www.lutron.com/HilumeLED.
To control lights from multiple-locations, use
3-way dimmer with NT-3PS- and NT-4PS- or
other mechanical switches.
Magnetic low-voltage dimmers
(small controls)
Preset dimmers
3-way/single-pole (small)
120 V 600 VA (450 W)
3-way/single-pole (small)
120 V 1000 VA (800 W)
NTLV-603P-XX1
NTLV-1003P-XX1
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
29
XX1:Architectural matte color codes, see pg. 26
(1-gang wallplate included)
Volume 1 P/N 367-1746 REV B
All models must be derated if ganged, unless
otherwise noted, see pg. 179.
*Requires neutral wire connection.
www.lutron.com/specificationguide | 1.800.523.9466 |
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Preset dimmers
Linear-slide switches
Slide up to on,
down to off
Higher capacity
dimmers require
larger heat sink
behind wallplate
•
•
Works with all load types
•
Button turns on/off
to slider level
•
Slide up to brighten,
down to dim
•
Measures
4.56 in x 4.56 in
•
Requires large
wallplate
•
Most can fit in a
1-gang electrical
backbox
•
Incandescent/halogen dimmers
(large controls)
Preset dimmers
3-way/single-poleNT-1503P-XX1
120 V 1500 W
Switches (small controls)
General purpose switches—all load types
Single-poleNT-1PS-XX1
120/277 V 20 A
3-wayNT-3PS-XX1
120/277 V 20 A
4-wayNT-4PS-XX1
120/277 V 20 A
For 3-way and 4-way switching, use NT-3PS-,
NT-4PS- or other mechanical switches.
No derating required if ganged.
Magnetic low-voltage dimmers
(large controls)
Preset dimmers
3-way/single-poleNTLV-1503P-XX1
120 V 1500 VA (1200 W)
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
XX1:Architectural matte color codes, see pg.26
(1-gang wallplate included)
All models must be derated if ganged, unless
otherwise noted, see pg. 179.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
30
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Slide-to-off fan controls
Slide-to-off fan controls
Slide up to increase speed/
on; down to decrease
speed/off
Slide up to increase
speed/on, down to
decrease speed/off
•
•
Quiet 3-speed model
designed to prevent motor
hum (for use with one
paddle fan)
Fully variable for use
with multiple paddle
or exhaust fans
•
•
Higher capacity
controls require
larger heat sink
behind wallplate
•
Fully variable for use
with multiple paddle or
exhaust fans
•
Measures
4.56 in x 4.56 in
Higher capacity loads
require large controls
•
•
Requires large
wallplate
•
Most can fit in a
1-gang electrical
backbox
•
Fan controls
(small controls)
Slide-to-off fan control—quiet 3-speed
Single-pole fan control
120 V 1.5 A
NTFSQ-XX1
For use with only one ceiling fan.
No derating required if ganged.
Slide-to-off fan controls—fully variable
Slide-to-off fan controls—fully variable
Single-pole fan control
120 V 6 A
31
Single-pole fan control
120 V 12 A
NTFS-12E-XX1
NTFS-6E-XX1
XX1:Architectural matte color codes, see pg. 26
(1-gang wallplate included)
Volume 1 P/N 367-1746 REV B
Fan controls
(large controls)
All models must be derated if ganged, unless
otherwise noted, see pg. 179.
*Requires neutral wire connection.
www.lutron.com/specificationguide | 1.800.523.9466 |
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Connections overview
Load connections*
Magnetic
Low-Voltage
Incandescent/
Halogen
MLV
Transformer
(by others)
Incandescent/
Halogen
Dimmer
Electronic
Low-Voltage
ELV
Transformer
(by others)
MLV
Dimmer
LED
Fluorescent
Lutron
Dimming
Ballasts
ELV
Dimmer
Switched
Ceiling
Lighting/Fans Fan
Lutron Hi-lume ®
A-Series LED Driver
Fluorescent
Dimmer
Fluorescent
Dimmer
(3-wire only)
Switch
Fan
Control
Dim from one location, switch from the others
Light
Source
3-way
Dimmer
Light
Source
3-way
Dimmer
3-way
Switch
4-way
Switch
(1 or more)
3-way
Switch
Download complete Connection Diagrams
For more information on ballasts,
visit www.lutron.com/ballasts.
For more information on LED drivers,
visit www.lutron.com/LED.
*For illustration purposes only.
Consult model number pages for specific
voltage and capacity information.
| 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
32
Architectural
wallplate opening
Nova Tb dimmers, switches, and fan controls
®
Accessories
Wallplates
4.56 in (116 mm)
Shown actual size: 2-gang
Architectural wallplate in
White (WH).
For more information
about Architectural wallplates,
see pg. 161.
4.56 in (116 mm)
.30 in
(7.6 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Architectural electrical
devices, see pg. 165.
Tamper resistant
GFCI receptacle
33
Customizable
6-port frame
Volume 1 P/N 367-1746 REV B
Cable jack
www.lutron.com/specificationguide | 1.800.523.9466 |