PureFX® Micro
Project Name
Spec Type
Recessed Micro
Notes
1’x1’
1 CFL (42W)
Order Guide
Some combinations of product options may not be available. Consult factory for assistance with your specification.
9411
C142
–
–
–
–
Product Series & Size
Version
Configuration
Lamping
Housing
Wiring
Voltage
Ballast
PureFX Micro 1’x1’
D1 Standard T-Grid or Drywall
ST
1 CFL (42W)
TRT/GX-24q-3/4
S Standard (22ga.)
C Chicago Plenum
1 1 cct
5 1 cct w/ Battery Pack
7 1 cct Dimming
1 120V
2 277V
3 347V*
E Standard Ballast
Standalone
*Note: Some
Consult website for complete list of
standard wiring options
See details on reverse
Upgrades & Accessories
Cross Section
options may
not be available
for each
configuration.
Consult factory
for details.
Consult Ledalite for ballast
manufacturer information
11-13/16"
Please indicate with check mark.
Lamps Included
5-11/16"
Hanger Kit
See details on reverse
12-1/2"
Side View
11-13/16"
12-7/16"
© 2008 Ledalite
Phone: 604.888.6811
Fax: 800.665.5332
Web: www.ledalite.com
Email: info@ledalite.com
12-7/16"
14-9/16"
12-1/2"
Side (Housing)
Top (Lens Frame)
Filename 9411xxxxC142.pdf Rev 2
PureFX® Micro
Additional Information
Recessed Micro
1’x1’
Optional Hanger Kit
Alternate Mounting Methods
1 CFL (42W)
Kit includes:
Conduit
butterfly bracket
(attached to fixture)
2x 27" hanger bars
Photometry
2x redirection bars*
Report Summary
Report #
Filename
Efficiency
Spacing Criteria
LTL13478
9411D1C142.ies
52.9%
butterfly bracket
(attached to fixture)
4x T-bar anchor clips
hanger bar
1.2 @ 0˚ along
1.2 @ 90˚ across
Mounted to Joists
Meets RP-1-04 recommendations for VDT-Intensive spaces
1/2” conduit
(supplied by others)
Mounted to T-Bar Grid
Channel
butterfly bracket
(attached to fixture)
Candela Distribution
Vertical
Angle
0
5
15
25
35
45
55
65
75
85
90
0
797
793
766
698
564
389
248
142
55
6
0
Horizontal Angle
22.5 45 67.5
90
797
795
771
704
564
385
245
141
58
10
0
797
797
782
696
526
362
238
144
72
17
0
797
796
777
707
553
377
242
141
65
14
0
797
797
781
701
533
367
240
143
70
16
0
Zonal
Lumens
180
hanger bar
135
135
77
218
321
341
292
218
141
69
17
90
90
*If required, redirection bars enable mounting 90˚ from fixture’s default orientation
800 cd
Specifications
45
0
45
90
0
Coefficients of Utilization (%)
Avg. Luminance (cd/m2)
Ceiling:
Wall:
70
50
30
10
70
70
50
30
50
50
30
10
0
0
Vertical
Angle
0 RCR
1
2
3
4
5
6
7
8
9
10
63
58
53
49
45
42
39
36
34
32
30
63
56
50
44
40
36
33
30
27
25
23
63
54
46
40
35
31
28
25
23
21
19
63
52
44
37
32
28
25
22
20
18
17
61
57
52
48
44
41
38
35
33
31
29
61
55
49
43
39
35
32
29
27
25
23
61
53
46
40
35
31
28
25
23
21
19
58
52
47
42
38
34
31
28
26
24
22
58
51
44
39
34
31
27
25
23
21
19
58
50
42
36
32
28
25
22
20
18
17
53
46
39
34
30
26
23
21
19
17
16
55
65
75
85
Based on a floor reflectance of 0.2
© 2008 Ledalite
3/4” or 1 1/2” channel
(supplied by others)
T-bar
45
80
anchor clip
Phone: 604.888.6811
0
Horizontal Angle
45
90
5497
4271
2701
875
5364
4241
3193
2042
5275
4332
3536
2480
IES files for this and other
photometric options can be
downloaded online at
www.ledalite.com
Fax: 800.665.5332
Web: www.ledalite.com
Due to continuing product improvements, Ledalite reserves the right to change specifications without notice.
Housing
Die-formed, post-painted, 22 gauge cold-rolled steel (New York City
version is 20 gauge).
Ballast
Electronic. Supplied with pre-installed ballast disconnects as per
changes to the National Electric Code.
Weight
Maximum 7.1 lb.
Wiring
Multiple wire entrances are available (top or side) to allow easy wiring
access. Available with battery pack. Consult factory for details.
Optical System
Optical assembly consists of flat acrylic panels and extruded curved
acrylic lens. A protected MesoOptics® film layer creates optimal light
distribution and high efficiency. The optical frame is constructed
from die-formed, spot-welded, 22 gauge cold-rolled steel assembled
together with extruded aluminum profiles in a sturdy frame. The frame
allows tool-free access to the inside of the fixture by way of expansion
springs. Maintenance can be performed from below the ceiling.
Mounting
Fixture is compatible with most common T-bar ceiling types and nonaccessible ceilings. Butterfly mount brackets (attached to housing)
are designed to work with optional hanger kit, or with EMT conduit or
metal channel (supplied by others). Brackets allow post-installation
adjustment of fixture height. Optional hanger kit includes hanger bars,
T-bar anchor clips and redirection bars to enable mounting 90° from
the fixture’s default orientation.
Email: info@ledalite.com
Approvals
Certified to UL & CSA Standards.
City of Chicago Approved CCEA (housing option C).
Designed to comply with NYC code requirements (Housing Option N).
Finish
Housing and frame are post-painted, high quality powder coat.
Available in white only.
IMPORTANT: Fixtures are rated for non-IC installations only.
Do not install insulation within 3” (76 mm) of any part of the
luminaire.
Filename 9411xxxxC142.pdf Rev 2