JOB NAME:
TYPE NO.:
CATALOG NO.:
Special Wording
Available!
High Glow Series LED Exit Signs In
Thermoplastic and Cast Aluminum
ORDERING INFORMATION
Catalog Number: Example: BNCSL2RTC1
PRODUCT FEATURES
MODEL
NUMBER
Thermoplastic
SL - AC Only
BNSL- Emergency
Cast Aluminum
CSL - AC Only
BNCSL- Emerg.
NUMBER OF
FACES
1 -Single Face
No Canopy
2 -Single Face
With Canopy
3 -Double Face
With Canopy
EXIT LETTER
COLOR
R - Red
G - Green
OPTIONS (1)(2)
SW Special Wording (3)
DL Damp Location Application
TCI1 Two Circuit Input - 120V
TCI2 Two Circuit Input - 277V
SX Self-diagnostic Operation (4)
IA Audible Intermittent Alarm (4)
IV
Visual Intermittent Alarm (4)
FA Fire Alarm Panel Interface
HOUSING
OPTIONS
COLOR
Blank - White
see below
B - Black
SP - Special Finish
ACCESSORIES
PG8
Wire Guard (Wall Mount Models)
PG11
Wire Guard (Ceiling/End Mount Models)
VERS
Vandal/Environmental Shield
VERS-4X Vandal/Environmental Shield
with Gasket
(1) Other options available.
(2) Some options may impact UL listing.
(3) Utilizes white LEDs. Specify special
wording requirements when ordering.
(4) For use with emergency models only.
SPECIFICATIONS
Thermoplastic Models: Exit housings and mounting canopies supplied on ceiling and end mount models are injection molded in high impact, UV stable, UL-94-5VA flame rated thermoplastic.
Construction Cast Aluminum Models: Exit housings are constructed of heavy die-cast
aluminum and supplied standard in a corrosion-resistant finish.
Mounting canopies supplied with ceiling and end mount models are
constructed of heavy die cast aluminum and finished to match housing color.
Wall Mounting:Wall mount models are supplied with knockouts in the back plate
for attachment to wall surfaces and standard 31/2” and 4” electrical boxes.
Installation
Ceiling/End Mounting: Mounting canopies are provided on ceiling and end mount
models for attachment to standard 31/2” and 4” electrical boxes.
Wiring: A unique “plug and lock” mounting bracket allows fast, easy installation.
Each exit face is illuminated by a special high intensity direct LED lighting panel,
Illumination
providing even illumination, contrast and visibility.
• Dual input 120/277VAC, 60 Hz
• AC Lockout protection
Electronics
• AC-On indicator light and test switch • Low voltage battery disconnect
• Automatic charger and transfer circuit Power
Input Power: 4W (maximum) regardless of AC input voltage or LED exit lamp
Consumptioncolor.
Sealed nickel cadmium longest life maintenance free battery. Optimum
Battery
operating temperature range: 68ºF to 86ºF (20ºC to 30ºC). Provides a minimum of 90 minutes of full output emergency illumination
Code Emergency models UL924 listed. UL Damp Location optional. Meets NFPA
Compliance Life Safety Code 101. Complies with NEC and OSHA.
Limited 3-year warranty. 5-year sealed nickel cadmium pro-rata battery
Warranty
warranty
Specifications are subject to change without notice. Consult website for latest version of this spec sheet.
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 •800-334-2212 • www.crescentlighting.com
Crescent is a Philips company
All Models
• Choice of thermoplastic or cast aluminum construction
• Sleek, ultra thin 7/8” (2.2cm) profile
• Exceptionally bright, even illumination
• Single or double stencil face models
• Red and green exit models
• Wall, ceiling or end mounting models
• Directional chevrons provided by means of knockouts
• Universal 120/277VAC field selectable input
• “Plug and Lock” mounting bracket allows easy installation
• Choice of white, black or special color finishes
• High output, long life LED lighting panel
Emergency Models
• 90 minutes of emergency lighting
• Solid-state charging and switching circuits
• Premium grade, maintenance free nickel cadmium battery
• Low voltage disconnect protects battery
• AC lockout feature reduces installation time
• Optional self-diagnostic circuit
• Momentary test switch
• Bi-color LED status indicator
• UL operating range 68ºF to 86ºF (20ºC to 30ºC)
• Meets NFPA Life Safety Code 101, NEC and OSHA
• UL924 listed
DIMENSIONS
51/2”
8”
14cm
20.3cm
11/2”
3.8cm
101/2”
9”
26.7cm
22.9cm
137/8”
7/8”
2.2cm
35.2cm
NOTE: Dimensions and specifications subject to change without notice.
Form 1105A 04/12 © 2006 Philips group