Low price, Light weight, Short delivery !
MY1520
High quality and reliability the testing and measuring
instruments manufacturer offers.
Good cost-performance and short delivery time.
Line up
■ MY1510
■ MY1520
■ MY1530
Small size : Portable and light weight type
Model
MY1510
Outside dimensions
Inside dimensions
380（W）x380（D）x165（H）mm
(excluding projections)
315（W）x315（D）x100（H）mm
Weight
approx. 3.5kg (without I/F Module)
Shielding characteristics
more than 60dB @ 2.4GHz
Reflection loss
more than 20dB @ ≧ 2.4GHz,MYA-75
Connectors
2 pcs of SMA @ back
I/F Module installation capacity
1 module @ back
Medium size : The most general and universal type
Model
MY1520
Outside dimensions
Inside dimensions
520（W）x520（D）x520（H）mm
(excluding projections)
460（W）x460（D）x460（H）mm
Weight
approx. 15kg (without I/F Module)
Shielding characteristics
more than 60dB @ 2.4GHz
Reflection loss
more than 20dB @ ≧ 2.4GHz,MYA-75
Connectors
2 pcs of SMA @ back
I/F Module installation capacity
2 module @ back
Large size : The type corresponding to even big EUT
Model
MY1530
Outside dimensions
Inside dimensions
1120（W）x620（D）x705（H）mm
(excluding projections)
1000（W）x500（D）x500（H）mm
Weight
approx. 56kg (without I/F Module)
Shielding characteristics
more than 60dB @ 2.4GHz
Reflection loss
more than 20dB @ ≧ 1.2GHz,MYA-77
Connectors
4 pcs of SMA
@ 2 at back and each one at both sides
4 modules @ 4 at back
I/F Module installation capacity
Option
MY1510
MY1520
MY1530
I/F Module
I/F Module
Radio wave absorber（MYA-77）
I/F Module
Radio wave absorber（MYA-75）
Wo o d e n t a bl e
Radio wave absorber（MYA-79）
Wo o d e n t a bl e
Radio wave absorber（MYA-79）
Tu r n t a b l e u n i t
I /F Mod u le
The I/F module is a module on which AC supply, DC supply, LAN,
mounted. All of the I/F modules are common to Taurus series.
USB, SMA, BNC, N, Triaxial and/or D-sub connectors are
Medium size installing two I/F modules
Option
Mounted connectors
IFM1
AC（1pc）、LAN（1pc）、USB（1pc）、D-sub9pin（1pc）
IFM2
AC（1pc）、LAN（2pcs）、USB（2pcs）、D-sub9pin（1pc）
IFM3
AC（1pc）、LAN（2pcs）、USB（2pcs）、D-sub25pin（1pc）
IFM4
DC（1pc）、LAN（1pc）、USB（1pc）、D-sub9pin（1pc）、D-sub25pin（1pc）
IFM5
SMA（2pcs）、BNC（2pcs）、N（2pcs）、Triaxial（2pcs)
※Separetely, the shield window module and
the shield mesh module can be supplied.
Radio wave absorber
The radio wave absorber of the urethane system, of which the
is the MYA-75 for the MY1510/1520 and the MYA-77 for the
characteristics is similar to all of linear, elliptic and circular
MY1530, but other absorber is selectable as an option for the
polarizations, is installed in Taurus series. The standard absorber
MY1520/1530.
Characteristics data
Radio wave absorber
1
Reflection loss(dB)
( This value is
compared with
metal plate )
No. Model Frequency range
2
MYA-75
≧2.4GHz
approx. 3c
2
MYA-77
≧1.2GHz
approx. 6cm
3
MYA-79
≧0.6GHz
approx. 12cm
3
Frequency GHz
Wooden table
Thickness
1
Turn table unit
This is a wooden table with casters.Two types of the Medium size
The turn table is available only for the Large size.
and the Large size are prepared as options.
Wooden table for Medium size
Diameter
200mmφ
Withstand load
10kg
Table material
Acrylic resin
Rotation angle
360°
The equipment or component needing the electromagnetic anechoic box for test, measurement or inspection
exists in the various fields. Taurus series provides the most suitable environment to realize this purpose.
Cellular phone（PDC/GSM/IMT-2000/W-CDMA）
RF-ID tag
Wireless LAN
Frequency band 2.4GHz/5.1GHz
Frequency band UHF（950MHz9）/2.4GHz
Frequency band 800MHz/900MHz/1.8GHz/2.2GHz
Application 1
◆ Transmission characteristics test of wireless equipment
The receiving antenna installed at the opposite side of EUT receives the radio wave radiated from EUT, which is put on an acrylic resin table, and then
the receiving signal is analyzed by Spectrum analyzer MSA338/358 so that the transmission characteristics of the wireless equipment can be evaluated.
Spectrum analyzer
MSA338/358
Frequency
Channel power
Occupied frequency bandwidth
Adiacent channel power
Strength of spurious radiation
Leakage power at carrier off
blocked
Electromagnetic anechoic box
Radio wave absorber
absorbed
Receiving antenna
Receving antenna terminal
EUT
900.0000MHz
LNA
acrylic resin table
Low noise amp
Frequency measurement is performedby
frequency counter option (resolution100Hz)
of MSA338/358.
Application 2
◆ Antenna characteristics measurement
The antenna characteristics is analyzed by the method that the antenna to be measured receives the radio wave radiated by the transmission
antenna and then Spectrum analyzer MSA338/358 measures this receiving signal.
Spectrum analyzer
blocked
Electromagnetic anechoic box
MSA338/358
Radio wave absorber
Antenna to be measured
Transmission antenna
Attenuator
Signal generator
absorbed
※ MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.
AGENCY
BO0706E
C &U
CREATIVE
& UNIQUE
Electromagnetic anechoic box
MY1515
Low price, Light weight, Short delivery!
Taurus series
MY1515 has an intake duct and exhaust duct and fan,and present an ideal testing environment
for an aging test of various type of radio equipment such as Note-PC and W-LAN terminal etc.
Specification
Outside dimensions
465(W)×465(D)×214(H)mm(excluding projections)
Inside dimensions
400(W)×400(D)×150(H)mm
Weight
approx. 10kg (without I/F Module)
Architecture
Double shield with radio absorber
and aluminum board
Shield characteristics
Reflection loss
Connectors
Fan
Option
more than 60dB @2.4GHz
more than 20dB @≧2.4GHz,MYA-75
8 pcs of SMA @ back side
0.46m3/min (the maximum force of the wind @50Hz)
I/F Module (Attachable on the back side)
Suitable for IFM1 to 5 of Taurus series
Features
・It has an intake duct and exhaust duct with fan. (※①)
・It absorb external noise and internal reflect radio wave
to make stabilized testing environment. (※②)
①
intake duct
・It is attachable with several type of interface. (※③)
②
①
③
※①
It discharge the heated air that is generated by a DUT set in the MY1515 such as note PC, mobile phone and WLAN rooter/terminal,
and it prevent the box to be heat up. Even if in use of long time test such as over 24 hour, user can make a measurement with
ideal aging condition.
※② By putting DUT in the anechoic box, user can reduces an influence of external noise and multi pass and get steady measurement
environment of test for Wireless LAN or other equipments.
※③
㩷
If changing an I/F Modules option, it is possible to measure it by various interfaces. Most of these interface modules have
noise filters that reduce an influence of external noise.
アプリケーション
I/F Module
The I/F Module are attachment module that is attached some kind of connectors such as AC power line, DC power line, LAN, USB,
SMA,BNC,N, Triaxial and D-sub. Customers who has already Taurus series can exchange the I/F Modules for a requirement. Mounted connectors
Option
IFM1
AC（1pc）、LAN（1pc）、USB（1pc）、D-sub9pin（1pc）
IFM2
AC（1pc）、LAN（2pc）、USB（2pc）、D-sub9pin（1pc）
IFM3
AC（1pc）、LAN（2pc）、USB（2pc）、D-sub25pin（1pc）
IFM4
DC（1pc）、LAN（1pc）、USB（1pc）、D-sub9pin（1pc）、D-sub25pin（1pc）
IFM5
SMA（2pc）、BNC（2pc）、N（2pc）、 Triaxial（2pc）
( This photo displays a box which is attached IFM3.) アプリケーション
Example
of application
◇ Estimation of W-LAN terminal 【4×4 MIMO -Multiple Input Multiple Output】
MY1515 make an environment that reduce a external radio influence from a field of factory or office,
and it make user to be able to estimate radio functions of WLAN terminals.
Shield from external noise
Reduce internal refection
①
②
⑦
③
<Receiver side>
① Anechoic box MY1515×1
② Receiver DUT ※4ch receiving
(PC with W-LAN, WiMAX, LTE etc.)
③ Dipole antenna ×4
④ PC/WS for analysis
⑤
⑥
<Transmitter side>
⑤ Anechoic box MY1515×1
⑥ Transmitter ※4ch Transmitting
(W-LAN rooter, AP, SG, Simulator etc.)
⑦ Dipole antenna ×4
④
Radio wave absorber
Item
MYA-75
MYA-77
MYA-79
Thickness
29mm
57mm
114mm
10dB
1GHz
350MHz
250MHz
15dB
1.9GHz
700MHz
370MHz
20dB
2.5GHz
1.2GHz
600MHz
24dB
≧5.6GHz
≧2.5GHz
≧1.2GHz
absorbing
performance
※ Micronix lends a demonstrations equipment for an estimations.
For inquiries please call the nearest dealer or sales section of Micronix.
AGENCY
㪤㪠㪚㪩㪦㪥㪠㪯㩷㪚㪦㪩㪧㪦㪩㪘㪫㪠㪦㪥
2987-2, KOBIKI-CHO, HACHIOJI-SHI, TOKYO 193-0934 JAPAN
TEL.+81-42-637-3667 FAX.+81-42-637-0227
URL: http://www.micronix-jp.com E-mail: micronix_e@micronix-jp.com㵘
AX0905E