IQB1D30D60A1
IDB30E60
PRELIMINARY DATASHEET
Fast Recovery 30A, 600V Diodes in TO247 B1 version






Fast recovery
Soft switching
Low reverse recovery charge
Low forward voltage
Easy paralleling
Pb-free lead finish; RoHS compliant
K
A
MAXIMUM RATINGS, at Tj = 25oC, unless otherwise specified
Parameter
Symbol
Value
Units
Repetitive peak reverse voltage
Continuous forward current
TC= 25oC
TC= 90oC
Surge non-repetitive forward current
TC= 25oC, tp = 10 ms, sine halfwave
Maximum repetitive forward current
TC= 25oC, tp limited by Tjmax, D = 0.5
Soldering temperature
Wave soldering, 1.6 mm (0.063 in.) from case for 10s
VRRM
600
V
IF
50
30
IFSM
117
IFRM
81
TS
260
oC
Operating junction and storage temperature
Tj, Tstg
-55… +150
oC
Symbol
Max. Value
Units
RthJC
1.05
oC/W
A
Thermal Characteristics
Parameter
Characteristics
Thermal resistance, junction to case
Electrical Characteristics, at Tj = 25oC, unless otherwise specified
Parameter
Min.
Value
Typ.
Max.
IR
-
-
50
2500
µA
VF
-
1. 5
1. 5
2.0
-
V
Symbol
Static Characteristics
Reverse leakage current
VR = 600V, Tj = 25oC
VR = 600V, Tj = 175oC
Forward voltage drop
IF = 30A, Tj = 25oC
IF = 30A, Tj = 175oC
© 2008 iQXPRZ Power Inc.
All rights reserved
Team Pacific Building, Electronics Avenue
FTI Complex, Special Economic Zone
Taguig City, Philippines
iQXPRZ Power Inc. reserves the right to
change without notice the specifications
and information contained within.
Website: www.iqxprzpower.com
Telefax +632 837 1538
Unit
Page 1 of 2
IQB1D30D60A1
IDB30E60
Electrical Characteristics, at Tj = 25oC, unless otherwise specified
Parameter
Symbol
Dynamic Characteristics
Reverse recovery time
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 25oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 125oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 175oC
Peak reverse current
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 25oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 125oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 175oC
Reverse recovery charge
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 25oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 125oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 175oC
Peak rate of fall of reverse recovery current during tb
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 25oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 125oC
VR = 400V, IF = 30A, diF/dt = 1000A/µs, Tj = 175oC
Min.
Value
Typ.
Max.
-
126
171
178
-
-
19
22
24
-
-
1100
1950
2150
-
-
4.0
4.6
4.8
-
trr
Irrm
Qrr
dIrr / dt
Unit
ns
A
nC
A/µs
Package Outline Drawing
0.640
0.610
0.242
[
6.15]BSC
[
16.26
15.49
4.69]
[5.31
0.098 2.49
0.059 [1.49 ]
0.209
0.185
]
0.244
0.212
[6.20
5.38]
Cathode
0.845
0.819
[
21.46
20.80
]
0.177
Ø0.150
0.138
[
4.50] Max.
0.084
0.065
0.800
0.780
20.32
[19.81
]
0.055
0.040
3.81
[Ø3.50
]
[ ]
[1.40
1.01]
2.13
1.65
0.430 [10.90] BSC
0.031
0.016
0.102
0.087
[0.79
0.40 ]
2.59
[2.21
]
Disclaimer
These specifications may not be considered as a guarantee of components characteristics. Components have to be tested
depending on intended application as adjustments may be necessary. The use of iQXPRZ Power Inc. components in life
support appliances and systems are subject to written approval of iQXPRZ Power Inc.
© 2008 iQXPRZ Power Inc.
All rights reserved
Team Pacific Building, Electronics Avenue
FTI Complex, Special Economic Zone
Taguig City, Philippines
iQXPRZ Power Inc. reserves the right to
change without notice the specifications
and information contained within.
Website: www.iqxprzpower.com
Telefax +632 837 1538
Page 2 of 2