The Phaser-Strobe incorporate the unique design features
of the Nova-Strobe Family and has an increased operating
range of 30 to 32,500 flashes per minute, the highest
available. It also has true external Phase Shifting
throughout the complete operating range, based on a
reference signal from an external sensor. The
Phaser-Strobe can multiply or divide the flash rate by two
with the press of a button, quickly identifying the basic
speed and harmonics. The unique digital adjustment knob of
Phaser-Strobe can select the decade for adjustments, so
coarse and fine adjustments of flash rates are made quickly
and with significantly better resolution than competitive
units. The memory feature of the Phaser-Strobe allows three
frequencies to be stored in memory, accelerating
measurements that require the use of several different flash
rates which can be displayed in both flashes per minute or
flashes per second. Phaser-Strobes operate with internal rechargeable batteries. They
may also be used with an external battery pack or operated continuously from line power
with the available Power Supply/Battery Charger.
FEATURES
●
Flash rates from 30 to 32,500 flashes per
minute, adjustable in 0.05 step
increments,to 3000 fpm and 0.5 step
increments to 32,500. The all digital, crystal
controlled microprocessor keeps readings
rock steady.
●
PB 115 Kit (shown right) includes carry
case and spare lamp
●
Times 2 and divide by 2 push buttons allow
easy checking for RPM harmonics and
allow stop motion far beyond the 32,500
fpm limit.
●
Store and recall up to 3 user selectable
values. Last measurement memeory, even
●
with the power off.
Individual in and output TTL jacks for provides power to remotes sensors and
allows "daisychaining" multiple strobes. A Tachometer mode allows accurate
speed measurement up to 200,000 RPM using external sensors.
●
Dual-function delays in external mode. Delays adjustable as phase angle or time
with resolution to 0.1 degree and 0.0001 seconds.
●
●
Auto step mode provides slow motion appearance for high speed repetitive event.
Backlit alphanumeric LCD display shows flash rate in flashes per second or
flashes per minute and delays in degrees or milliseconds.
●
NIST Certificate of Calibration included.
SPECIFICATIONS
SPECIFICATIONS
Phaser-Strobe PB
CE
Flash Range
30-32,500 FPM (Flashes per Minute) (RPM) 0.5-533.33 FPS (Flashes per Second) (Hz)
Accuracy
±0.01% of reading
Digital Adjustment Knob (All ranges
and modes)
32 detents per revolution. Decade change push mode enables any value to be changed in
decade steps (powers of 10) from 0.0001 to 10,000 per detent
Flash Rate Resolution
±0.05 FPM 30.00-2,999.95 FPM
±0.5 FPM 3,000.0-32,500 FPM
Flash Rate (External Triggering)
5-9,999.9 FPM
10,000-32,500 FPM
0.5000-541.66 FPS
Phase Delay - Degrees
0-359 ±0.1 100-3,499.0 FPM
0-355 ±0.1 3,500-9,999.9 FPM
0-350 ±0.1 10,000-32,500 FPM
Time Delay - Seconds
0-6.500 seconds ±0.0001 seconds
Auto Step Mode (Range)
Step Size 0.0-180.0º Step Rate 0.0001-6.50 seconds per step
Flash Energy (Typical)
150 mJoule < 10,000 FPM 50 mJoule > 10,000 FPM
Flash Duration (Typical)
10-30 microseconds
Average Power - Watts
10W
Tachometer Mode
5-200,000 RPM from external trigger (flash inhibited above 33,000 FPM)
External Input (1/8" phone plug)
Input Pulse - 5 microseconds, TTL to 24V max
Trigger Output/Remote Sync
(Typical)
5V TTL compatible negative edge, 500 microseconds pulse
Power
Internal rechargeable batteries or ACT power supply/recharger
Weight
2.5 Lbs. (1.2 kg) including batteries
N.I.S.T. Certificate
Included
ACCESSORIES
ITEM NO.
MODEL
CE
6180-050
ROS-5P*
X
DESCRIPTION
6180-015
IRS-5P*
Infrared Sensor with 8 foot cable
6180-017
MT-190P*
Magnetic Trigger Sensor/Amplifier with 8 foot cable
6280-034
C-4027
Set (2) mating 1/8" stereo phone plugs
6280-037
CA-4044-6
6 foot input/output cable, 1/8" mono phone plug to BNC connector
6280-038
CA-4045-6
6 foot input/output cable, 1/8" mono phone plug to 1/8" mono phone
plug
6280-030
L-1903
Digital Stroboscope Spare Lamp
6280-041
SPC-1
Splashproof Protective Cover for battery model Stroboscopes
6280-020
PSC-3
X
Power Supply/Recharger, 115 Vac - 50/60 Hz
6280-023
PSC-4
X
Power Supply/Recharger, 230 Vac - 50/60 Hz
6180-060
R-5
X
Recharger, 115 Vac - 50/60 Hz
6180-062
R-6
X
Recharger, 230 Vac - 50/60 Hz
6280-040
CC-7
Plastic Latching Carrying Case
6180-070
T-5
Reflective Tape - 5 foot roll, 0.5 inch wide
5290-104
CAL-N.I.S.T.
N.I.S.T. Traceable Certificate of Calibration / Re-Calibration
Remote Optical Sensor with 8 foot cable and mounting bracket
ORDERING INFORMATION
ITEM NO.
MODEL
6210-010
Phaser-Strobe PB 115
X
Stroboscope - 30-32,500 FPM, with R-5 (115
Vac) recharger
6210-011
Phaser-Strobe PB Kit 115
X
Phaser-Strobe PB 115 with PSC-3 (115 Vac)
power supply/recharger and spare lamp in
latching carrying case
6210-012
Phaser-Strobe PB 230
X
Same as Phaser-Strobe PB 115, but with R-6
(230 Vac) recharger
6210-013
Phaser-Strobe PB Kit 230
X
Same as Phaser-Strobe PB Kit 115, but with
PSC-4 (230 Vac) power supply/recharger
CE
DESCRIPTION