DIMMING COMPATIBILITY: TRACK, WALL SCONCE & PURE LIGHT LAMP
O2 LED Track Fixture Series: CTL8051
Compatible with most Electronic Low Voltage and
Electronic Low Voltage (ELV)
Triac (Incandescent)
Triac (Incandescent) Dimmers
Lutron Faedra
Lutron Skylark
Lutron NovaT
Lutron Maestro
Leviton Acenti
Leviton True Torch
Leviton Trimatron
Leviton SureSlide
Leviton Illumitech
Cooper Aspire
O2 LED Track Fixture Series: CTL8052 and CTL8053
Compatible Lutron Dimming Controls
The following is a general list of compatible Lutron HiLume dimming controls.
For specific Lutron part numbers, please refer to www.lutron.com or contact
Contech Lighting Technical Support
Lutron NovaTa
Lutron RadioRA 600W Lutron HomeWorks QS 600W Lutron RPM-4U Module
Lutron Maestro Wireless
Lutron Radio RA 1000W
Lutron HomeWorks QS 1000W Lutron RPM-4A Module
Lutron RadioRA 2 1000W
Lutron HomeWorks QS Adaptive Dimmer Lutron HomeWorks 600W Dimmer
Lutron Stanza
Lutron RadioRA 2 Adaptive Dimmer Lutron HomeWorks QS WPM
Lutron HomeWorks 1000W Dimmer Lutron HomeWorks WPM
Lutron Grafik Eye QS
Lutron Grafik Eye 3000
Utlizes the Lutron HiLume A-Series Dimming Driver
O2 Mini LED Track Fixture Series: CTL8061, CTL8062, and CTL8063
DIMMERS & DRIVERS
Compatible with most Electronic Low Voltage
and Triac (Incandescent) Dimmers
Electronic Low Voltage (ELV)
Lutron Skylark
Lutron Diva
Lutron Maestro
Leviton Sureslide
Lutron NovaT
Leviton Vizia
Leviton Illumatech
Triac (Incandescent)
Lutron Skylark
Lutron Diva
Leviton Illumatech
Optica and LED Cylinder Fixture Series: CTL802818L, CTL802927L, CTL8001, CTL8002, LIR8001, LIR8002
Compatible with most Electronic Low Voltage
Electronic Low Voltage (ELV)
Triac (Incandescent)
and Triac (Incandescent) Dimmers
Lutron Faedra
Lutron Skylark
Lutron NovaT
Lutron Maestro
Leviton Acenti
Leviton True Torch
Leviton SureSlide
Leviton Illumitech
Cooper Aspire
Leviton Trimatron
Optica Mini LED Track Fixture Series: CTL804L2
Compatible with most Electronic Low Voltage, Magnetic Low Voltage and Triac (Incandescent) Dimmers
Electronic Low Voltage (ELV)
Leviton Sure Slide
Lightolier Sunrise
Lutron Diva
Magnetic Low Voltage (MLV)
Lutron Skylark
Triac (Incandescent)
Leviton Trimatron Deluxe Lutron Skylark
Leviton Decora
Lutron Diva
Lightolier MultiSet Pro
Lutron Arinadi
LED Linear Wall Lighter Fixture Series: CTL170 and CTL171
Compatible with most Electronic Low Voltage
and Triac (Incandescent) Dimmers
Electronic Low Voltage (ELV)
Lutron Skylark
Lutron Diva
Lutron Maestro
Leviton Sureslide
Lutron NovaT
Leviton Vizia
Leviton Illumatech
Triac (Incandescent)
Lutron Skylark
Lutron Diva
Leviton Illumatech
Pure Light PAR38 LED Lamp (E26 Base) Products: CL6EM, CL8EM, CTL838/2LEM, CTL8038LEM, CTL5038LEM,
CTL603LEM, RL38LEM, RL38ICLEM, RL38ICRLEM,
RA638VLEM, RAN38LEM
Compatible with most Electronic Low Voltage Dimmers
Electronic Low Voltage (ELV)
Lutron Faedra
Lutron NovaT
Lutron Maestro
Leviton Acenti
Lutron Diva
Leviton Sureslide
Quadris 12W LED Wall Sconce: WS07512LD
Compatible with most Electronic Low Voltage
Electronic Low Voltage (ELV)
Triac (Incandescent)
and Triac (Incandescent) Dimmers
Lutron Faedra
Lutron Skylark
Lutron NovaT
Lutron Maestro
Leviton Acenti
Leviton True Torch
Leviton SureSlide
Leviton Illumitech
Cooper Aspire
Leviton Trimatron
8W LED Pendant: CRS8 Series
Compatible with most Electronic Low Voltage
Electronic Low Voltage (ELV)
and Triac (Incandescent) Dimmers.
Lutron Faedra
Lutron NovaT
Leviton Acenti
Triac (Incandescent)
Lutron Skylark
Lutron Maestro
Leviton True Torch
Leviton Trimatron
Leviton SureSlide
Leviton Illumitech
Cooper Aspire
Testing has been performed on these dimmers, however, this does not imply any warranty of compatibility or performance.
70
All specifications subject to change without notice.
This matrix is designed to provide multiple options to powering the MCT-3LED Symphony Track fixture and MRL-3LED
Symphony Track pendants. All transformers and drivers must be installed according to National Electrical Code and local
building codes. Due to minimum wattage requirements of many electronic transformers, ConTech offers a low wattage
Electronic Transformer option, as well as Magnetic Transformers and Drivers.
MOUNTING
OPTION
# OF FIXTURES/
TOTAL WATTAGE
ELECTRONIC
TRANSFORMER
MAGNETIC
TRANSFORMER
Mono-Point
(MLA-18 or
MLA-19)
1 Fixture/Up to 4.7W
RS1260MLED
LVT-150
Symphony Track
Up to (2) Fixtures/
Total of 9.4W
RS1260M
LED LVT-150
LED10CV12
Symphony Track
Up to (3) Fixtures/
Total of 14.1W
RS1260M
LED LVT-150
LED25 12V
Symphony Track
Up to (4) Fixtures/
Total of 18.8W
RS1260M
LED LVT-150
LED25 12V
5 - 10 Fixtures/
Total of 23.5W - 47W
LRT-181, LRT-363, MLA-60
LVT-1200-C-24, LVT-150,
LVT-300, LVT-300 277V,
LVT-300-24, LVT-500-C,
LVT-600-24, LVT-600-277V-24,
LVT-600-C
LED60WDC12V
11 or More Fixtures/
Total of 51.7W+
LRT-181, LRT-363, LVT-151,
LVT-151 24V, LVT-175-DC,
LVT-303, LVT-303 24V,
LVT-303-DC, MLA-60,
MLA-415, MLA-830
LVT-1200-C-24, LVT-150,
LVT-300, LVT-300 277V,
LVT-300-24, LVT-500-C,
LVT-600-24, LVT-600-277V-24,
LVT-600-C
LED100WDC12V
Symphony Track
Symphony Track
All specifications subject to change without notice.
DIMMERS & DRIVERS
TRANSFORMER/DRIVER MATRIX FOR MCT-3LED FIXTURE & MRL-3LED PENDANTS
DRIVER
LED10CV12
71
DIMMING COMPATIBILITY: 4" & 6" LED DOWNLIGHTS
The following ConTech Recessed LED Products are compatible with the dimmers listed below.
4" and 6" 1000 Series: Standard, 0-10V DC and LUTRON Hi-Lume® Dimming
4" and 6" 2000 Series: 0-10V DC and LUTRON Hi-Lume® Dimming
6" 2700 Series: 0-10V DC and LUTRON Hi-Lume® Dimming
STANDARD TRIAC DIMMING
4" 1000 SERIES and 6" 1000 SERIES
DIMMERS & DRIVERS
120V AC Dimming:
Incandescent (INC) and Magnetic Low Voltage (MLV) Dimmers
Standard 120V AC line voltage dimmers for incandescent
and magnetic low voltage loads adjust the light with “forward phase control,” where the dimmer “chops” the forward
part of the AC wave to deliver less or more power to the
light source. No neutral wire connection required.
120V AC Dimming:
Electronic Low Voltage (ELV) Dimmers
Standard 120V AC line voltage dimmers for electronic low
voltage loads adjust the light with “reverse phase control,”
where the dimmer “chops” the back part of the AC wave to
deliver less or more power to the light source. Neutral wire
connection required.
0-10V DC DIMMING
4" 1000 and 2000 SERIES
6" 1000, 2000 and 2700 SERIES
0-10V DC Dimming is a common type of dimming for many
commercial applications. Many local codes require the contractor to separate the low and line voltage wiring in the
junction box. 0-10V DC Low voltage dimming operates using two low voltage dimming wires that are separate from
the 120V or 277V AC power. The 0-10V dimmer switch
sends a variable output voltage to the fixture based upon
the dimming level. 10V Corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled
with the line voltage power (120V or 277V AC) input to the
dimmer and then dimming operation is controlled with the
0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low
voltage control wires (color coded violet and gray).
These systems are typically dimmable to 15%. LED DimThese systems are typically dimmable to 10%. LED Dimming ming performance may vary based on dimmer model, manuperformance may vary based on dimmer model, manufacturer, facturer, circuit wiring and circuit loading. Consult dimmer
circuit wiring and circuit loading. Consult dimmer manufacture manufacture for the latest dimmer information.
for the latest dimmer information.
Recommended Dimmers
• Lutron DVTV
Recommended Dimmers
Standard Dimmers:
• Lutron Skylark Series (Part #s S-600, S2-LH)
• Lutron Maestro Series (Part # MAW-600)
• Cooper Aspire Series (Part # 9530XXX)
• Leviton Illumitech Series (Part # IPI06-XXX)
• Leviton Trimatron Series (Part #s 6602-X, 6681-X, 6683-X,
6684-X, 700-X, and 705-X)
• Leviton SureSlide Series (Part # 6631)
• Leviton True Torch Series (Part # 6606-1LM)
Electronic Low Voltage Dimmers:
• Lutron Nova T Series (Part # NTELV-600)
• Lutron Faedra (Part # FAELV-500-XX)
• Leviton Acenti (Part # ACE06-XXX)
Dimmer maximum load rating with LED may differ from published
traditional source dimmer ratings. Consult manufacturer for
maximum dimmer information.
• Leviton IP710
LUTRON Hi-Lume® DIMMING
4" 1000 and 2000 SERIES
6" 1000, 2000 and 2700 SERIES
Lutron Hi-Lume® LED A-Series drivers offer high-performance, continuous dimming from 1% - 100%.
For a complete list of compatible dimmers and controls,
please visit www.lutron.com.
NOTES:
• Consult factory for additional dimming information.
• Testing has been performed on these dimmers, but this does not imply any warranty of compatibility.
72
All specifications subject to change without notice.
NON-DIMMING & DIMMING DRIVERS: ACCENT LIGHTING
Because LEDs operate at a lower current than traditional light
sources, most LED fixtures must be powered by an LED driver.
When selecting a driver, follow these steps:
1.Verify the appropriate current (typically 350mA or 700mA)
2.Select a driver with enough usable wattage for the fixtures
you’ve selected.
WIRE NUT
BLACK LED LEAD
OUTPUT
(+) RED
(-) BLACK
LED DRIVER
HOT (BLACK)
120V AC INPUT
18AWG solid or tinned stranded wire
NEUTRAL (WHITE)
RED LED LEAD
LEDs in series should be connected with
black wire of one LED to red wire of next
LED, etc. All codes requiring Class II
splice compartments must be followed.
18-2 CLASS II PLENUM WIRE
18" Included with driver. Additional length available; Part No: 18-2 SOL CL2P
MODEL
OUTPUT
CURRENT
WATTAGE
RANGE
INPUT
VOLTAGE
MAX. MOUNTING
DISTANCE
LENGTH
WIDTH
HEIGHT
DIMMERS & DRIVERS
NON-DIMMING DRIVERS
LED3503
350mA
1.0W – 3.2W
100-240V
65-1/2'
2"
1-5/8"
7/8"
LED3512
350mA
1.0W – 11.5W
120V
108'
5-1/4"
7/8"
7/8"
LED3513
350mA
6.3W - 12.6W
100-240V
65-1/2'
6-5/8"
1-5/8"
1-1/4"
LED3518
350mA
10.5W - 18.9W
100-240V
65-1/2'
4-1/8"
2-3/4"
1-1/4"
LED7003
700mA
2.0W - 3.5W
100-240V
65-1/2'
2"
1-5/8"
7/8"
LED7012
700mA
5.6W - 12.6W
100-240V
65-1/2'
6-5/8"
1-5/8"
1-1/4"
LED7017
700mA
2.0W - 16.8W
120V
108'
5-1/4"
1-5/8"
7/8"
LED7018
700mA
8.4W - 18.9W
100-240V
65-1/2'
4-1/4"
2-3/4"
1-1/4"
DIMMING DRIVERS
LED3518D
350mA
2.0W - 14.7W
120V
65'
7-3/4"
1-3/4"
1-1/4"
LED7036D
700mA
3.9W - 29.4W
120V
65'
7-3/4"
1-3/4"
1-1/4"
NON-DIMMING DRIVERS
DIMMING DRIVERS
• Drivers provide constant 350mA or 700mA output
• DC constant current output
• Serial connection required from fixture to fixture
• Short-circuit protection
• Meets UL, CSA and FCC requirements
• Class II LED driver must be maintained within an enclosure
that meets local building codes and NEC
• For additional configurations, consult factory
• Drivers provide constant current 350mA or 700mA output
• There must be at least two (2) fixtures on these drivers to
operate properly
• Serial connection required from fixture to fixture
• Compatible with standard dimmers; leading edge, trailing
edge and universal
• Fully protected: short circuit, input high voltage, inherent
thermal protection and over voltage protection
• Self re-settable
• Meets UL, CSA and FCC requirements
• Class II LED driver must be maintained within an enclosure
that meets local building codes and NEC
• For additional configurations, consult factory
Non-Dimming Drivers
LED3503- 3W/350mA Driver
LED7003- 3W/700mA Driver
Dimming Drivers
LED3518D- 18W/350mA Dimmable Driver
LED7036D- 36W/700mA Dimmable Driver
LED3513- 12W/350mA Driver
LED7012- 12W/700mA Driver
LED3512- 12W/350mA Driver
LED7017- 17W/700mA Driver
LED3518- 18W/350mA Driver
LED7018- 18W/700mA Driver
74
LED Driver Accessories
18-2 SOL CL2P - 18-2 Class II Plenum Wire (Sold in Foot Increments)
All specifications subject to change without notice.
DC12V
120VAC
Cord & Plug
or Hard Wire
POWER SUPPLY
TAPELIGHT DIMMING
+
+
IN
ConTech LED Tapelight is dimmable utilizing either the TLPDIM10V Dimming Module or the TLPDIMWP Wall Mount Dimmer.
+
OPTOTRONIC® OT DIM
+
• The 0-10V Dimming Module (TLPDIM10V) is designed for use with commercially available 0-10V dimmers. 0-10V dimmers are
commonly used for LED lighting systems due to their fine performance and reliability. Compatible with quality 0-10V dimmers, this
module will dim down to 15%.
120VAC
Cord & Plug
or Hard Wire
POWER SUPPLY
DC12V
+
IN
+
+
OPTOTRONIC® OT DIM
+
120VAC
Cord & Plug
or Hard Wire
POWER SUPPLY
DC12V
POWER SUPPLY
120VAC
Cord & Plug
or Hard Wire
ConTech POWER SUPPLY
INPUT VOLTAGE: 12V DC
DIMMERS & DRIVERS
• The Wall Mount Dimmer (TLPDIMWP) contains on-board dimming capabilities and dims down to 0%. It has an attractive appearance
that blends with most decors and requires no junction box to mount.
POWER SUPPLY/DISTANCE CHART
DC12V
STANDARD OUTPUT
WATTS PER FOOT: 1.2
HIGH OUTPUT
WATTS PER FOOT: 1.8
RGB
WATTS PER FOOT: 3.9
MODEL NO.
TYPE
WATTAGE
MAX
SYSTEM1
MAX
LOAD2
MAX
SYSTEM1
MAX
LOAD2
MAX
SYSTEM1
MAX
LOAD2
TLP12VP24
Plug -In
24W
30 ft.
20 ft.
30 ft.
13 ft.
20 ft.
6 ft.
TLP12VP
Plug-In
36W
30 ft.
30 ft.
30 ft.
20 ft.
20 ft.
9 ft.
TLP12VHW20
Hardwire
20W
30 ft.
16.5 ft.
30 ft.
11 ft.
20 ft.
5 ft.
TLP12VHW60
Hardwire
60W
30 ft.
50 ft.
30 ft.
33.3 ft.
20 ft.
15.4 ft.
3
3
1.Distance from first LED tape section to end of LED tape run. Exceeding this length may result in inconsistent light output from
beginning to end of the LED tape run.
2.Overall distance of LED tape under load [illuminated sections]. If exceeded damage to the power supply and LED tape may result.
3.If maximum load run exceeds maximum system run, multiple runs from power supply may be employed as long as maximum load
run is not exceeded.
POWER SUPPLY WIRING CHART (Copper Wire)
Wire Gauge
20
18
16
14
12
Distance*
6 ft.
10 ft.
15 ft.
23 ft.
40 ft.
*Power Supply to First LED Tape Section
All specifications subject to change without notice.
75