BUILD & PRICE
COMPARE SPECS
CALCULATORS
BROCHURES
SPECIAL OFFERS
COMPARE RESULTS
Specifications
- CONFIGURATION
Fore-aft
configuratiion
Blade-Blade-Rolling reel
Blade-Blade-Rolling reel
Primary blade type,
disk, coulter or turbo
Wave blade
Wave blade
Manufacturer's
description of blades
Earth Metal VT Wave Blade
Earth Metal VT Wave Blade
Working width,
minimum,ft-in (m)
42' 5" (12.93)
22' 2" (6.76)
Working width,
maximum, ft-in (m)
47' 2" (14.38)
34' 8" (10.57)
Transport width,
minimum, ft-in (m)
18' 6" (5.64)
14' 6" (4.42)
Transport width,
maximum, ft-in (m)
18' 6" (5.64)
18' 0" (5.49)
Transport height,
minimum, ft-in (m)
13' 4" (4.06)
10' 5" (3.18)
Transport height,
maximum, ft-in (m)
13' 4" (4.06)
13' 7" (4.14)
Weight, minimum, lb
(kg)
28,000 (12700)
15,377 (6975)
Weight, maximum, lb
(kg)
32,816 (14885)
21,588 (9792)
Sizes available,
number of widths
2
5
Blade diameter, in
(mm)
20 (508)
20 (508)
Blade spacing, in
(mm)
7.5 (191)
7.5 (191)
Blade edge profile
Wave pattern, can be sharpened
Wave pattern, can be sharpened
Blade concavity
Slight concavity
Slight concavity
Blade Mounting, on
Gangs or Standards
Gangs
Gangs
Front angle of gang
or blades, degrees
18
18
- Dimensions and
Weights
- Blades
- Blade Mounting
and Angles
EMAIL SIGN UP
RIGHT RED TRACTOR
Rear angle of gang or
blades, degrees
18
18
Rolling Diameter, in
(mm)
14 (356)
np
Bars or blades on
circumference
Flat or round bars, spiral pattern
Formed double edge on each bar
Harrow tooth, spike
or coil tine
Coil tine optional, for rice areas only
Coil tine optional, for rice areas only
Harrow gangs
3-bar optional, for rice areas only
3-bar optional, for rice areas only
Transport tire, largest
size
16.5Lx16.1 FI up to 440/55 R18
12.5x15 FI up to 380/60 R16.5
Wing tire, largest size
12.5Lx15 FI
11Lx15, 8 ply or 380/60 R16.5
7 to 11 (17 to 27)
7 to 11 (17 to 27)
Literature Number
CIH4220807
CIH08091401
Literature Date
April, 2008
August, 2014
Manual Number
SP-4038-13; SP-4041-14
SP-4041-14
Manual Date
May, 2013; June, 2014
June, 2014
Manufacturing status
Current
Current
First Entry Date
September, 2014
September, 2014
Revision Date
--
--
Rolling Basket, Reel
or Chopper
- Description,
basket, reel or
chopper
- Harrow
- Tires
- Tractor Power
Recommendations
Power per width of
cut, hp/ft (kW/m)
- Sales Literature
- Operators or
Product Manual
AGRONOMIC DESIGN
BUILT WITH AGRONOMIC DESIGN FEATURES THROUGHOUT
New components also reduce maintenance for more uptime and productive seedbed preparation.
HELPING RESIDUE WORK FOR YOU
LARGER TIRES = LESS COMPACTION
PERFECT BLADE SIZE
The True-Tandem 335 VT slices through tough
residue, partially mixes with soil and anchors it to the
soil, These actions speed the decomposition process
of residue which contains valuable nutrients for the
next season’s crop.
Larger tire option means a larger footprint and less
root-inhibiting compaction in the field due to wheel
tracks.
Blades are 20 in. diameter which is the perfect
size for the machine. Smaller than some
competitors’ 22” blades, there is more edge
speed in the field to loosen and toss soil up
and out to level, filling smaller ruts and valleys.
REDUCE THE NUMBER OF CLODS
OBTAIN A SMOOTH SEEDBED
END WITH A SUPERIOR FINISH
Double formed bar reel with active hydraulics rolling
basket breaks up clods and conditions the field.
Reduction in the number of clods leads to a much
better seedbed. Active hydraulics mean constant
downpressure, adjustable from the front of the
machine. The reel also may be positioned in float
mode, or raised entirely in wet corners of the field.
Front and rear sets of blades are indexed exactly to
create a smooth seedbed.
Factory-set 18 degree blade angle is perfect
for a superior finish. The angle matches with
the blade concavity to leave a level seedbed
and virtually no horizontal compaction layer
(unlike competitive units) since the blade does
not ride on the back side.
PRODUCTIVITY
THE BEST LINE OF VERTICAL TILLAGE TOOLS JUST GOT BETTER
Thanks to this workhorse’s combination of Agronomic Design features and rugged components, producers can take on heavy residue, uneven ground and rocky conditions.
DUAL SEASON USE
MORE PASSES IN LESS TIME
NARROW TRANSPORT
A true all-purpose Vertical Tillage tool for Fall and/or
Spring use. Dual season use brings extra value to
the 335VT.
Operating speed of 7 - 9 mph means more acres
covered in less time than conventional tillage passes.
Improved more narrow transport dimensions
means less time traveling from field to field.
REDUCED MAINTENANCE TIME
OPTIMAL OPERATING DEPTH
Greaseless walking tandem bearings and greaseless
rolling basket bearings means less time spent in
maintenance. There are 21 fewer grease points than
the prior model.
Operating depth of 2.5 – 3 inches maximum allows
higher speed and more acres per day, all with less
draft and fuel than other tillage solutions.
DURABILITY
THE BEST LINE OF VERTICAL TILLAGE TOOLS JUST GOT BETTER
The True-Tandem 335 VT solidifies the leadership legacy of Case IH vertical tillage tools with even more durable components.
LED LIGHTS
CLASS 3 POWDER COAT PAINT
STUBBLE-RESISTANT TIRES
LED lights are brighter and last longer than
incandescent lamps.
The Class 3 powder coat paint finish retains color
longer and is more resistant to scrapes and
scratches.
Stubble-resistant tire option means less chance
of tire damage in tough field conditions.
DURABLE BLADES
EARTH METAL BLADES
RIGID SCRAPERS
Blades are 20 in. diameter, .256” thick for less
bending and breaking.
Earth metal blades provide increased durability. Earth
metal differs from conventional blades in that it does
uses new steel and other alloys resulting in a much
tighter tolerance for the resulting alloy. Earth Metal is
also an improved process which includes quenching
the blade while still in the die. This results in a blade
that holds its shape better and is much more ductile
and resistant to breaking or bending.
Scrapers are rigid, and stay in position. The
formed-channel spool scrapers are stronger
and have limited rotation so they stay in place.
CHANGE REGION
SITE MAP
LEGAL NOTICES
TERMS & CONDITIONS
PRIVACY POLICY
MOBILE
DEALER LOCATOR
COPYRIGHT 2015