Corelite
DESCRIPTION
The Bridge™ LED recessed offers a traditional yet modern design with the
latest in solid-state lighting technology. High performing WaveStream™ optics
allow for maximum energy savings and optimal illumination in a ultra-minimalistic shallow recessed fixture. Two WaveStream optic options are available;
a fully uniform pattern and a square pattern that provides a unique translucent
appearance without sacrificing performance. Additional shielding options are
also available including rectangular perf, round perf, and nano-prism inlays.
Available in 2x2, 2x4, 1x4 sizes along with several popular metric sizes, the
Bridge is highly configurable with well-thought-out options and a number of
architectural styles for application versatility.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Shielding
Perf pattern and nano-prismatic
inlays are available as additional
aesthetic options. Perf inlay
available in round or rectangular
pattern. Nano-prismatic inlay is a
high light transmission material
offering additional brightness
mitigation.
Construction
Shallow 3-3/4” deep housing is
a 22 gauge steel reflector with
injection molded high-reflectance
polycarbonate end plates securely
attached with integral snaps and
screws for strength, rigidity and the
elimination of gaps. WaveStream
light engine with extruded
aluminum heatsinks span across
the bottom of the luminaire. Drivers
can be accessed via plenum. Large
access plate for supply connection.
Fixture weight: 14.0 lbs.
Optics
Optical grade acrylic embedded
with patented WaveStream
Accu-Aim™ optics for optimal
distribution, excellent uniformity,
and high performance.
Center
light
23-5/8”
[600mm]
engine becomes virtually clear in
the off-state.
Finish
Fixture housing and back reflector
are high reflectance white using
electrostatically applied polyester
powder coat paint for durability
and luminous uniformity. Injection
molded end plates are color
matched.
Electrical
Long-life LED system coupled
with electrical driver to deliver
optimal performance. Projected life
is 100,000 at 80% lumen output.
LEDs are available in 3000K, 3500K
or 4000K with a typical CRI ≤ 85.
Standard drivers are 0-10 volt
continuous dimming that work
with any 0-10V control/dimmer. Or,
specify Digital Addressable Lighting
Interface (DALI) drivers; for use with
Fifth Light controls. See ordering
information for details.
Mounting
Universal flange design works with
most 3-7/8”
lay-in ceiling types. Integral
pry-out
tabs secure luminaire to
[99mm]
ceiling grid from above. Fixture
offers tie-in locations for tie-wire
on all corners. Consult local
code for appropriate tie-wire
recommendations. See Technical
Notes section for drywall frame kit
and surface mount kit options.
BRIDGE - BRG
Full Pattern Optic
WaveStream™ LED
1’ x 4’ Recessed
3-3/4” Depth
Compliance
Components are UL recognized
and luminaires are cULus listed for
25°C ambient environments, damp
location listed, and RoHS compliant.
3-3/4”
[96mm]
CERTIFICATION DATA
cULus - 1598
Damp Location Listed
IC Rated
LM79/LM80 Compliant
ROHS Compliant
Warranty
Five-year warranty.
11-5/8” [296mm]
11-5/8”
[296mm]
47-3/8” [1204mm]
ORDERING INFORMATION
Sample Number: BRG-WS-3L35-LD2-UNV-14-T1-STD-SV-EL14W-AR
Series (1)
BRG =
Optics/Shielding
Bridge Recessed
WS WaveStream Full Pattern
WD = WaveStream with Round Perf Inlay
WG = WaveStream with Rectangular Perf Inlay
WN = WaveStream with Nano-Prism Perf Inlay
=
Light Level
(1x4 Nominal delivered lumens)
1 Light Level 1 (2000 Lms, 19W)
2 = Light Level 2 (3000 Lms, 28W)
3 = Light Level 3 (4000 Lms, 39W)
4 = Light Level 4 (5000 Lms, 50W)
5 = Light Level 5 (6000 Lms, 61W)
=
Color
Temperature
L30 LED 3000K
L35 = LED 3500K
L40 = LED 4000K
=
LED Version
LD2 LED 2.0
=
Input Voltage
UNV = Universal
(120V-277V)
347 = 347V (2)
Size
Ceiling Type
Driver Type
Integral Sensor
(Optional)
Emergency
(Optional)
Options
14 = 1’ x 4’
T1 = 1
” T-Bar, Slot Grid,
and 9/16” Tegular (3)
T9 = 9/16” T-Bar (Flush)
STD = Standard 0-10V (10%-100%)
HCD = 0-10V (1%-100%) (6)
STP = Bi-Level Step Dimming (40%, 100%) (5)(8)
5LT = Fifth Light DALI (10%-100%) (4)
5LTHD = Fifth Light DALI (1%-100%) (4) (7)
SV = Integrated Occupancy/
Daylight Sensor (9)
EL14W = 1
4-watt 120V-277V
Integral EM Battery Pack (10)
ETS2 = IOTA Emergency Transfer
Switch (11)
AR = Air Return
CP = Chicago Plenum (9)
NY = New York City Construction
W6 = 6’ Whip Flex
W12 = 12’ Whip Flex
See page 3 for technical notes
PS519101EN
07/02/2016
1 of 4
Bridge - BRG 1x4
PHOTOMETRICS
0
FILE NAME:BRG-WS-3L35-LD2-
UNV-14-STD.IES
90°
LAMP:(LD2) LED 3500K
318
75°
LUMENS:4150 Lm
636
60°
953
WATTS:38.7 W
EFFICACY:107 Lm/W
45°
30°
1270
0°
15°
0º (II)
-----
90º ( I )
--------------------------
0
TEST NO.:P189581
LAMP:(LD2) LED 3500K
299
75°
LUMENS:3600 Lm
598
60°
899
WATTS:38.7 W
EFFICACY:93 Lm/W
45°
30°
1197
0°
15°
0º (II)
-----
90º ( I )
--------------------------
0
TEST NO.:P189596
LAMP: (LD2) LED 3500K
328
75°
LUMENS: 4526 Lm
657
60°
985
WATTS: 38.7 W
EFFICACY: 98 Lm/W
45°
30°
1314
0°
15°
0º (II)
-----
90º ( I )
--------------------------
Zone
Lumens
%
Fixture
Vertical
Angle
0º
45º
90º
0º-30º
1010
24.3
45º
4022
4172
4375
0º-40º
1690
40.7
55º
4045
4317
4490
0º-60º
3153
76
65º
4044
4265
4191
0º-90º
4150
100
75º
3831
3735
3663
85º
2720
2432
2292
ZONAL LUMENS SUMMARY
LUMINANCE DATA (CD/M2)
Zone
Lumens
%
Fixture
Vertical
Angle
0º
45º
90º
0º-30º
927
25.7
45º
3273
3582
3855
0º-40º
1524
42.3
55º
3088
3698
3970
0º-60º
2765
76.8
65º
2893
3764
3676
0º-90º
3600
100
75º
2627
3254
2820
85º
2218
2147
2292
SC: (II) 1.23, ( l ) 1.3
FILE NAME: BRG-WN-3L35-LD2UNV-14-STD.IES
90°
LUMINANCE DATA (CD/M2)
SC: (II) 1.31, ( l ) 1.36
FILE NAME:BRG-WG-3L35-LD2-
UNV-14-STD.IES
90°
ZONAL LUMENS SUMMARY
TEST NO.: P189626
ZONAL LUMENS SUMMARY
LUMINANCE DATA (CD/M2)
Zone
Lumens
%
Fixture
Vertical
Angle
0º
45º
90º
0º-30º
1010
26.5
45º
3573
3785
4023
0º-40º
1652
43.4
55º
3361
3829
4046
0º-60º
2958
77.8
65º
3129
3779
3646
0º-90º
3804
100
75º
2844
3206
2844
85º
2432
2077
2077
SC: (II) 1.22, ( l ) 1.27
Note: Round Perf (WD) photometric performance is similar to Rectangular Perf (WG). Reference IES-format photometry online for more detail.
Eaton
18001 E. Colfax Avenue
Aurora, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Specifications and dimensions
subject to change without notice.
PS519101EN
07/02/2016
2 of 4
Bridge - BRG 1x4
ENERGY AND PERFORMANCE DATA
LUMEN MAINTENANCE
Ambient
Temperature
TM-21 Lumen
Maintenance
(100,000 hours)
Theoretical
L70
(Hours)
25°C
>80%
156,000
1x4 – Bridge Light Level Outputs and Distributions (3500K)
Series
INLAY OPTIONS
BRG-WS
Round Perf Inlay (WD)
BRG-WD
Rectangular Perf Inlay (WG)
BRG-WG
Nano-Prism Inlay (WN)
BRG-WN
Light
Level
Delivered
Lumens
Wattage
Efficacy
(LPW)
1
2
2080
18.7
111
3102
28.1
111
3
4150
38.7
107
4
5180
50.2
103
5
6151
62.5
98
1
1814
18.7
97
2
2706
28.1
96
3
3621
38.7
94
4
4519
50.2
90
5
5366
62.5
86
1
1804
18.7
97
2
2691
28.1
96
3
3600
38.7
93
4
4493
50.2
90
5
5336
62.5
85
1
1906
18.7
102
2
2843
28.1
101
3
3804
38.7
98
4
4748
50.2
95
5
5638
62.5
90
TECHNICAL NOTES
1. Dimming wires come standard in all LED fixtures but can be capped in the field for standard switched operation.
2. Integral 347V electronic driver with STD 0-10V option only. Factory supplied remote transformer for all other driver/dimming options.
3. “T1” ceiling type is compatible with Metalux DF Series Drywall Frame Kits and Metalux Universal Surface Mount Kits, ordered separately from
Metalux. For 2x2 drywall frame kit, order part #DF-14-W. For 2x2 surface mount kit, order part #SK-14-WS. Refer to the surface mount kit specification sheet for more information.
4. Must be used in conjunction with a DALI control system. For a complete listing of Fifth Light Technology products and other solutions from Cooper Controls, visit www.eaton.com/lightingsystems
5. 1x4: STP driver not available in Light Levels 1 and 2.
6. 1x4: Two HCD drivers required for Light Level 5.
7. 1x4: Two 5LTHD drivers required for Light Level 5.
8. 1x4: Two STP drivers required for Light Level 5.
9. Integral sensor works only with 0-10V driver and is factory prewired to the driver for stand-alone control. Order #ISHH-01 for Programming
Remote and #ISHH-02 for Personal Control Remote.
10. Integral emergency battery pack is 14W maximum, 90 minute output. A test switch/indicator button can be tested safely from the ground using a laser pointer, while the patented EZ Key prevents accidental discharge of the battery during construction. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 14=1400 lumens). Emergency battery pack not available with two driver configurations.
11. Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. Product height with transferbdevice is 5” (126mm).
12.Chicago plenum not available with GTD.
Eaton
18001 E. Colfax Avenue
Aurora, CO 80011
P: 303-393-1522
www.eaton.com/lighting
Specifications and dimensions
subject to change without notice.
PS519101EN
07/02/2016
3 of 4
Bridge - BRG 1x4
INTEGRATED SENSOR
The Bridge with Integrated Sensor technology provides automatic energy savings without sacrificing performance.
Traditionally, these types of energy savings required coordination between the luminaire and a lighting control system.
The Bridge delivers superior lighting with integrated PIR occupancy and daylighting controls.
Capture the benefits of traditional lighting controls, without complicated coverage planning or special wiring. Ideal for
new construction or retrofit, the Bridge delivers automatic ON to an energy saving light level, while ensuring lighting
is turned OFF when the space is unoccupied.
The integral daylight sensor reduces the need for special daylight zone planning. The luminaire will automatically
adjust the light level based on reflected light beneath the sensor in a closed loop method.
Occupied daylight light levels and unoccupied light levels can be adjusted using the integrated sensor
programming remote (Catalog Number: ISHH-01). The integrated sensor personal remote (Catalog Number: ISHH-02)
provides code compliant manual raise, lower, ON, OFF control.
The Bridge with Integrated Sensor is easy to install with no special wiring and ensures energy savings out-of-the-box with
default control settings.
How it works:
• As the user enters the space controlled by the integral sensor, the lighting turns ON to the daylight level (default 500 lux).
• Lighting will remain at the daylight level until the space is unoccupied. This will start the occupancy timeout period (default 20 minutes).
• If the space remains unoccupied for half of the timeout period, the lighting will automatically reduce to the Energy Saver light level. This adjustable light level is typically half of the occupied daylight level.
• At the end of the timeout period the lighting will go to the unoccupied light level. This adjustable light level uses the OFF default setting.
100
Energy Savings
Opportunities
(DO)
Daylight Level
Light Level
(DO)
Daylight Level
(ES)
Energy Saver
Light Level
0
(DU)
Unoccupied Level
Timeout Value
Unoccupied
Occupied
Unoccupied
Occupied
Target light level default: 500 lux at 8 ft.
Coverage
Coverage
4m
[12 ft.]
Top View
CL
Side View
3.3m
[10 ft.]
0m
[0 ft.]
0m
[0 ft.]
4m
[12 ft.]
4m
[12 ft.] Major Motion
0m
[0 ft.]
4m
[12 ft.]
Recommended Mounting Height 8–12 ft.
Optional Remote Controls
R
Lo aise
we /
r
5
LO
T
IN
75
1.
To
S
50
M
AX
Ra et
O
5 is
2. 0, 7 e, L utp
T
o
3. o sa 5, M we ut
Se
a r
lec ve p x. or P
re
t O res
ss
s
cc
M
or SET
in.
Un
Oc
c
Pr
og
IS
ra
m
U
Oc n
c
SC
Tim
Ou e
t
AX
75
50
15
ES
20
c
c
To
Pre
Re
IS
m
ote
Se
IN
ES
T h ss th le c
tS
e
st o li g e S
h ti C E cen
re
N
d
li g n g w E b e s
ht
u
il
lev l a d tt on
els
ju st .
..
to
Pe
ing
-0
1
M
Oc
Oc
m
HH
ISHH-01 Programming Remote
Eaton
18001 E. Colfax Avenue
Aurora, CO 80011
P: 303-393-1522
www.eaton.com/lighting
EN
E
M
10
HI
SE
M
R
Lo aise
we /
r
rso
U
Oc n
c
na
HH l Rem
-0 ote
2
Specifications and dimensions
subject to change without notice.
ISHH-02 Personal Control Remote
PS519101EN
07/02/2016
4 of 4