Xitanium spot-/downlight drivers
Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as downlighting and spot/accent lighting.
Reliability is guaranteed for 5 years, enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple
current and thermal de-rating. Most drivers feature central DC operation. In the coming years LEDs will continue to increase in efficiency,
creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an
adjustable output current.
Application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting
specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions from different
manufacturers.
Non dim. driver
L
N
Touch/Dali driver with DALI dimming
L
N
DALI +
DALI -
L N
L N
+12V
L
N
DA DA
LED Module
7. . . . .1
Rset
FAN
LED Module
Rset
Max nr. of drivers
on MCB 16A Type B
Dimming
To LED
Inrush
current
Inrush current
1/2 value time
Power
factor
Wire cross
section
Ipeak
Twidth
λmax.
mm2
SLM 2000lm non dim. Driver (25W driver)
Non dimmable
≤ 27
27A
250µs
>0.9
up to 2.5mm2
SLM 2000lm TD Driver (25W driver)
Touch / DALI dimmable
≤ 50
5A
50µs
>0.9
up to 1.5mm2
SLM 3000lm/Pro Color passive non dim. Driver (36W driver)
Non dimmable
≤ 50
5A
50µs
>0.9
up to 1.5mm2
SLM 3000lm/Pro Color passive TD Driver (36W driver)
Touch / DALI dimmable
≤ 50
5A
50µs
>0.9
up to 1.5mm2
SLM Pro Color active 3800lm non dim. Driver (50W driver)
Non dimmable
≤ 24
23.5A
272µs
>0.9
up to 1.5mm2
SLM Pro Color active 3800lm TD Driver (50W driver)
Touch / DALI dimmable
≤ 30
5.3A
700µs
>0.9
up to 1.5mm2
*Values refer to the standard drivers supplied with downlights. Drivers used in Surface Mounted/Suspended luminaires, Lounge luminaires or profiles may have other characteristics.
174
Black wire: LED Red/Pink wire: LED +
Rset
To LED
SLM driver (only for Downlights*)
FAN
7. . . . .1
Black wire: LED Red/Pink wire: LED +
To LED
DA DA
Driver
7. . . . .1
Black wire: LED Red/Pink wire: LED +
Normally open
(NO) switch
L N
Driver
FGND
IDC
PGND
Driver
LED Module
Touch/Dali driver with Touch dimming
Driver setting
The output current of Xitanium drivers can be adjusted.
This can be done using a plug which is inserted in the
driver.
Always make sure the correct plug is inserted otherwise
the LED can be damaged due to an incorrect current.