Amplifiers / Subwoofers / Speakers
Amplifiers/Subwoofers/Speakers
Powered to perform, created to overwhelm
Your amplifier and speaker system is literally the interface between audio signals and your ears. So
the quality of your components will have a direct impact on the quality of sound you hear. From crystalline highs to thundering lows, Clarion amplifiers and speakers deliver the sound of satisfaction.
Speakers that span the entire
spectrum
Although bass gets a lot of attention,
great sound does not consist of bass
only. Clarion’s lineup of high-performance speakers is your assurance that
you and your audience will be listening to
the highest quality audio, whether you’re
listening to a CD or your iPod® or watching a DVD. Enjoy the entire spectrum of
sound, and experience complete in-car
entertainment.
Power amplifiers that deliver the
punch
Whether you only listen to background
music or operate a full-fledged mobile
DVD theatre, the performance of the
power amplifier will make a spectacular difference in the sound you hear. So
regardless of the type of system you build,
go ahead and fill your car with sound that
is pure pleasure to the ear. Clarion gives
you all you’ve ever wanted in an amplifier,
and a lot more.
42
Subwoofers that make the earth
move
Crank up the power full blast, and count
on these subwoofers to deliver. Clarion
offers a selection of subwoofers including active subwoofers, to meet and surpass your demands for groundpounding
bass, featuring tough and high-performance cone materials, die-cast frames and
powerful voice coils that can really take
the heat.
43
Amplifiers
Overwhelming performance for
an unrivalled soundscape.
DPX11500
1500W MONO POWER AMPLIFIER
Upgrade your system with polished circuit designs and unwavering power to a level of power and sound excellence that leaves no
one in doubt. Digital circuitry renders tones and reverberations that have been inaudible until now to their fullest. The overdimensioned power supply in Clarion amplifiers has sufficient reserves to deliver non-stop sound that’s always a class above  even when
playing the most demanding digital sources. And by using only the highest quality components in its power amplifiers, Clarion can
create sophisticated designs that maximise heat dissipation and achieve exceptional power in the limited vehicle interior.
APA4320
• 1500 watts of maximum music power • 1-channel ×
800 watts into 4 ohms, 20Hz-20kHz @ < 0.05%THD
• 1-channel × 1500 watts into 1 or 2 ohms, 20Hz20kHz @ <0 .1%THD • Adjustable subsonic filter,
10-80Hz • Remote control included • Input voltage
selector • Precise frequency selector • Variable bass
boost; 0-15dB @ 30-125Hz • Adjustable -12dB/oct.
Low pass crossover, 50-250Hz • Gold plated connectors; RCA/speaker/power • Speaker level input
4 × 160W BRIDGEABLE
POWER AMPLIFIER
• 4/3/2 channels bridgeable mode operation • 640 watts
of maximum music power (4-channel × 160 watts into 4
ohms) • Continuous average power output: 320 watts (4channel × 80 watts into 4 ohms) • Typical bridged power
output: 2-channel × 230 watts @ 0.2% THD • Typical 2ohm stereo power output: 4-channel × 115 watts @ 0.2%
THD • Bass Extender: 0/+15 dB @ 45 Hz • Independent
front/rear adjustable crossover frequencies (HP/LP): 55
~ 550 Hz or 550 ~ 5,500 Hz • Adjustable line level input
200 mV up to 6 V • Speaker level inputs to allow easy
interfacing with factory car stereos • Soft mute On/Off
circuitry • Gold plated isolated massive speaker and
power supply connectors
APX4240
APX2120
400W 4/3/2 CHANNEL POWER AMPLIFIER
200W 2/1 CHANNEL POWER AMPLIFIER
• 400 watts of maximum music power • 4-channel × 60 watts into 4 ohms,
20Hz-20kHz @ < 0.1%THD • 4-channel × 90 watts into 2 ohms, 20Hz20kHz @ < 0.1%THD • Selectable bass boost; 0dB/6dB/12dB @ 50Hz
• Independent front/rear adjustable -12dB/oct. High/Low pass crossover,
50Hz-300Hz • Gold plated connectors; RCA/speaker/power • Speaker
level inputs
• 200 watts of maximum music power • 2-channel × 60 watts into 4 ohms,
20Hz-20kHz @ < 0.1%THD • 2-channel × 90 watts into 2 ohms, 20Hz20kHz @ < 0.1%THD • Selectable bass boost; 0dB/6dB/12dB @ 50Hz
• Adjustable -12dB/oct. High/Low pass crossover, 50Hz-300Hz • Gold
plated connectors; RCA/speaker/power • Speaker level input
APA2160
2 × 160W BRIDGEABLE POWER
AMPLIFIER
• 2/1 channels bridgeable mode operation • 320 watts of maximum
music power (2-channel ×160 watts into 4 ohms) • Continuous
average power output: 160 watts (2-chnnel × 80 watts into 4 ohms)
• Typical bridged power output: 1-channel × 250 watts @ 0.2% THD
• Typical 2-ohm stereo power output: 2-channel × 125 watts @ 0.2%
THD • Bass Extender: 0/+15 dB @ 45 Hz • Adjustable crossover
frequency (HP/LP): 55 ~ 550 Hz or 550 ~ 5,500 Hz • Adjustable line
level input 200 mV up to 6 V • Speaker level inputs to allow easy
interfacing with factory car stereos • Soft mute On/Off circuitry • Gold
plated isolated massive speaker and power supply connectors
[APA4320 / APA2160]
Space-saving
design with high
heat dissipation
The APA4320 &
APA2160 feature a
die-cast design that
boasts multiple heat
sinks for high-heat
dissipation. This eliminates the need for an internal fan. Also
preventing overheating is the amplifier’s circuit design that promotes heat dispersal. This heat dispersal effect offers during
consecutive driving for high power in a minimal space.
44
Circuit design achieves high
quality sound
Encompassing a host of high quality components, Clarion’s amplifiers
take your music to a whole new level.
Featuring uncompromising resistance to magnetic noise, the circuit
design used by Clarion’s amplifiers
allow for easy subwoofer system
configurations using its embedded high-pass and low-pass filters.
What’s more, Clarion’s high-grade,
gold-plated block terminals offer low
electrical and contact resistance for
crystal clear sound. These amplifiers also boast 2-ohm stability
for increased power and reliability when connected to speakers
with 2-ohm loads. Put simply, Clarion offers a line of amplifiers
that boast superior power and versatility.
APX1300
400W MONO POWER AMPLIFIER
Any Model
Gapped-E core choke
coils
Utilised in the power supply circuitry, gapped-E
core choke coils offer low
impedance, making them
resistant to harmful magnetic noise. This results in a
more efficient amplifier and
a low-noise power supply, which is important when achieving
crystal clear sound.
• 400 watts of maximum music power • 1-channel × 300 watts into 4 ohms,
20Hz-20kHz @ < 0.1%THD • 1-channel × 400 watts into 2 ohms, 20Hz20kHz @ < 0.1%THD • Selectable bass boost; 0dB/6dB/12dB @ 50Hz
• Adjustable -12dB/oct. Low pass crossover, 50Hz-300Hz • Gold plated
connectors; RCA/speaker/power • Speaker level input
APA4320
Front Speakers
Rear Speakers
APX1300
Subwoofer
45
Subwoofers
Dynamic performance to drive your bass line
Whether it’s the Polypropylene Electrolytic Spun Aluminium coated dust cap design of our Platinum Series
subwoofers, the Injected Polypropylene Titanium coated cones used in many of our single voice coil subwoofers, or the brute force generated by our powered subwoofers, you can count on Clarion’s commitment to
quality to come through even when you’re listening at full-blast.
PXW1252
30 CM [12˝ ] SUBWOOFER
• 1000 watts of maximum music power • 500 watts RMS
• Dual 4-ohm heat resistant voice coils • Polypropylene
electrolytic spun aluminum coated dust cap design • Kevlar/paper composite cone design • Co-polymer composite
high excursion surround • Dual strontium ferrite magnet
motor dssembly • Hyper-extended vented pole piece • Dual
gold plated block terminals • Linear poly-cotton spider with
integrated tinsel leads • S.E.T. (Spider Exhaust Technology) cooling • Custom designed die cast aluminum • Hidden
screw mounting gasket
PA15-S
PA12-S
PA10-S
38 CM [15˝ ] SUBWOOFER
30 CM [12˝ ] SUBWOOFER
25 CM [10˝ ] SUBWOOFER
• Injected polypropylene titanium coated cone
• Single 50 m/m heat resistant voice coil • Rear-vented pole piece • Foam rubber surround • Large 30 oz
strontium ferrite magnet • Chromed metal basket
• Suitable for sealed and
vented installation • 600
watts maximum music
power
• Injected polypropylene titanium coated cone • Single
50 m/m heat resistant voice coil • Rear-vented pole
piece • Foam rubber surround • Large 49 oz strontium
ferrite magnet • Chromed
metal basket • Suitable for
sealed and vented installation
• 600 watts maximum music
power
ACTIVE SUBWOOFER
• Injected polypropylene titanium coated cone • Single
50 m/m heat resistant voice coil • Rear-vented pole
piece • Foam rubber surround • Large 30 oz strontium
ferrite magnet • Chromed
metal basket • Suitable
for sealed and vented
installation • 600 watts
maximum music power
MaxxBass : OFF
PXW1552
Sound pressure
High
38 CM [15˝ ] SUBWOOFER
Low
MaxxBass : ON
• 1500 watts of maximum music power • 750 watts RMS • Dual 4-ohm heat resistant voice coils • Polypropylene electrolytic spun aluminum coated Dust cap design
• Kevlar/paper composite cone design • Co-polymer composite high excursion
surround • Dual strontium ferrite magnet motor assembly • Hyper-extended vented
pole piece • Dual gold plated block terminals • Linear poly-cotton spider with
integrated tinsel leads • S.E.T. (Spider Exhaust Technology) cooling • Custom
designed die cast aluminum • Hidden screw mounting gasket
SRV313
SRV202
Stick wired remote control
SLIM DESIGN 17 CM [6 3/4˝ ] ACTIVE SUBWOOFER
20 CM [8"] ACTIVE SUBWOOFER
• Dual voice coil • 120 W high power amplifier with low pass filter • Maxx Bass
circuit for virtual bass enhancer • 17cm(6 3/4″) counter drive woofer with dualneodymium magnet • Air compression structure with aluminum die-cast enclosure • Remote control for gain control /low pass filter (selectable 50/75/100/120
Hz)/phase select • Blue LED power indicator • RCA line level input/Speaker
level input
• 120 W high power amplifier with low-pass filter • Dual voice coil
woofer with strontinium magnet • Air compression structure for dynamic
bass response • Subwoofer level control for gain control/low-pass filter
(55 ~ 130 Hz)/phase select controls • Leather finished MDF enclosure
• RCA line level input/speaker level input
46
Subwoofer
Subwoofer
Subwoofer
Subwoofer
Subwoofer
Subwoofer
Active Powered Subwoofer
Active Powered Subwoofer
25 cm
25 cm
38 cm
30 cm
25 cm
17 cm
20 cm
●
●
●
●
●
●
Dual
Single
Single
Single
Single
Dual
Dual
●
●
●
●
●
et
)
we
r (W
oil
ol
po
ak
pe
se
v
em
ote
co
ntr
ma
ium
ym
od
oic
ec
1200
1500
1000
●
1000
●
600
●
600
●
●
sic
●
●
●
Mu
●
ew
i
Dual
Ed
g
●
dr
●
ire
●
W
30 cm
ne
●
●
al
●
Dual
Du
Single
●
ou
nd
su
rr
er
bb
●
●
Ru
●
●
Re
●
Sp
30 cm
38 cm
gn
ce
pie
ole
dp
nte
ve
ar-
lesta
ck
ed
Se
po
a
dy m
we
na le
rfu
mi ss
ls
c b pa
tro
as rab
nti
s r ol
um
es ic c
Alu
ma
p
o
sp mi
on ne
gn
ac niu
se s
et
er m
tru
for di
ctu
e
hig -c
re
for
he ast
r p fra
ow m
4-o
er e a
hm
ha nd
nd co
vo
ice
lin ol
g ing
co
il
ub
ke
me
tal
ium
an
Tit
●
Subwoofer
rs
ize
lise
ste
m
sy
Subwoofer
Do
• 600 watts of maximum music power • 300 watts RMS • Single 4-ohm heat
resistant voice coils • Polypropylene electrolytic spun aluminum coated dust
cap design • Kevlar/paper composite cone design • Co-polymer composite high
excursion surround • Dual strontium ferrite magnet motor assembly • Hyperextended vented pole piece • Dual gold plated block terminals • Linear polycotton spider with integrated tinsel leads • S.E.T. (Spider Exhaust Technology)
cooling • Custom designed die cast aluminum • Hidden screw mounting gasket
SRM3093HX
PXW1552
PXW1252
PXW1052
PFW1051
PA15-S
PA12-S
PA10-S
SRV313
SRV202
ea
• 1000 watts of maximum music power • 500 watts RMS • Dual 4-ohm heat resistant voice coils • Polypropylene electrolytic spun aluminum coated dust cap design
• Kevlar/paper composite cone design • Co-polymer composite high excursion
surround • Dual strontium ferrite magnet motor assembly • Hyper-extended vented
pole piece • Dual gold plated block terminals • linear poly-cotton spider with
integrated tinsel leads • S.E.T. (Spider Exhaust Technology) cooling • Custom
designed die cast Aluminum • hidden screw mounting gasket
on
25 CM THIN TYPE SUBWOOFER
du
cti
25 CM [10˝ ] SUBWOOFER
pro
PFW1051
Re
PXW1052
dM
IPP
co
ne
wo
ofe
r
*“Maxx Bass” is a patent of KS-Wares.“Maxx Bass” is a registered of KS-Wares.
600
●
●
600
120
120
47
Speakers
Component systems
In-phase coaxial
SRS1686
SRR6986
SRR1686
15 × 23 CM [6″ × 9″]
IN-PHASE COAXIAL 2-WAY
16 CM [6 1/4″]
IN-PHASE COAXIAL 2-WAY
16 CM [6 1/4″]
2-WAY COMPONENT
SPEAKER SYSTEM
SRS1726
16.5 CM [6 1/2″] 2-WAY COMPONENT
SYSTEM
48
40
60
0.66
25.5
28~35,000
92
●
●
●
●
●
35kHz
200
40
80
0.66
6.4
40~35,000
90
)
(Hz
/m
)
nse
/W
po
(db
res
cy
s)
do
ew
on
ec
me
tw
oo
m
ns
160 mm
20 mm
●
●
120kHz
250
45
85
1.08
4.5
30~120,000
90
In-Phase Coaxial 2-way
150 x 230 mm
25 mm
●
●
80kHz
350
50
45
0.59
29.6
25~80,000
92
In-Phase Coaxial 2-way
165 mm
20 mm
●
●
120kHz
250
45
75
0.93
4.2
28~120,000
91
In-Phase Coaxial 2-way
130 mm
20 mm
●
●
120kHz
200
40
90
0.86
3.3
35~120,000
90
Re
Me
Tit
Gla
ncy
250
In-Phase Coaxial 2-way
icie
35kHz
Eff
●
qu
en
●
Fre
●
SRR1686
SRR6986
SRX1785
SRX1385
itre
●
Va
s (L
●
25 mm
wit
hr
91
silk
91
28~120,000
Pu
re
25~120,000
3.9
fibr
15.6
1.18
ss
0.67
85
Gla
50
45
130 mm
du
ctio
55
250
pro
300
120kHZ
2-way component system
yst
e
/m
)
120kHz
●
fer
)
/W
(db
●
●
25 mm
13 CM [5 1/4″] IN-PHASE
COAXIAL 2-WAY
ncy
Eff
●
●
165 mm
16.5 CM [6 1/2″] IN-PHASE
COAXIAL 2-WAY
icie
Fre
●
2-way component system
SRX1385
(Hz
nse
po
res
cy
Va
s (L
qu
en
Va
ria
ble
s)
ofe
wo
ce
pie
wir
e
Fu
ll O
arven
Re
FC
ntin
ou
●
●
tall
●
●
Pu
re
●
20 mm
an
2-w
a
ym
ted
g tw
ee
ter
r
-dr
ced
lan
ba
EI
dP
ise
itre
r
twe
ete
ive
ua
hd
wit
ter
ee
me
tw
do
silk
an
gle
Hi
twe
wit gh gr
h le ade eter
vel -12
a d
Po ttenu B/oc
we
t
rfu attor 2 wa
l st
(
ron 0,-3d y cros
Intium B) so
line
ver
ma
-6
ne
gn
dB
two
et f
/oc
k
o
t
rd
. cr
Ex
y
tre
oss
na
me
mic
ove
ly h
ba
rn
igh
ss
etw
res
fre
ork
Mu
qu
po
sic
en
nse
pe
cy
ak
rep
po
r
od
we
Co
u
ctio
r (W
ntin
n
uo
)
us
po
Fs
we
(Hz
r (W
)
)
Qts
ym
l ne
od
fer
oo
ew
IPP
ise
dM
ium
me
tall
ew
on
ec
20 mm
160 mm
ss
165 mm
2-way component system
pro
2-way component system
Re
SRS1752HX
SRS1686
SRS1726
SRS1326
fibr
du
ctio
ns
yst
e
oo
m
fer
wit
hr
con
ub
be
r su
rro
un
ium
d
ma
gn
et
13 CM [5 1/4″] 2-WAY COMPONENT
SYSTEM
SRX1785
ub
be
r su
rro
In p
un
ee
d
for hase
ter
be co
wit
st s ax
hd
i
ou al
ua
nd de
l ne
Po
qu sig
od
we
alit n
ym
rfu
ya
ium
l st
nd
ron
ma
i
m
t
ium
gn
ag
Ex
et
ing
tre
ma
me
g
n
ly h
et f
igh
or
dyn
fre
Mu
qu
am
sic
en
ic b
cy
pe
ass
ak
rep
po
res
rod
we
Co
po
uct
r (W
ntin
nse
ion
uo
)
us
p
ow
Fs
er
(Hz
(W
)
)
Qts
SRS1326
49
Speakers
Custom-fit coaxial 2-way
Multiaxial 3-way speakers
SRC4696
SRC5736
SRC5716
10 × 15 CM [4″ × 6″] CUSTOM-FIT
PLATE 2-WAY
13 × 18 CM [5″ × 7″]
CUSTOM-FIT MULTIAXIAL 3-WAY
13 × 18CM [5″ X 7″]
CUSTOM-FIT COAXIAL 2-WAY
SRC1773
16.5 CM (6 1/2″) CUSTOM-FIT
COAXIAL 2-WAY
SRC1373
13 CM (5 1/4″) CUSTOM-FIT
COAXIAL 2-WAY
SRC4673
10 CM (4″) CUSTOM-FIT
COAXIAL 2-WAY
SRC4617
SRC916
10 × 15 CM [4″ × 6″] CUSTOM-FIT
COAXIAL 2-WAY
9 CM [3 1/2″] CUSTOM-FIT
COAXIAL 2-WAY
50
be
am
ic b
ub
dyn
30
105
0.93
1.4
40~80,000
90
Custom-fit coaxial 2-way
100 mm
20 mm
●
●
●
●
80kHz
120
30
105
1.93
1.4
40~80,000
90
Custom-fit coaxial 2-way
100 × 150 mm
●
●
●
●
80kHz
120
30
80
1.14
3.0
40~80,000
91
Re
)
(Hz
IPP
(db
res
cy
s)
on
/W
po
/m
)
nse
dM
ize
me
on
ec
fibr
ncy
120
●
icie
80kHz
Eff
●
●
●
en
●
●
●
qu
●
Fre
●
●
s (L
itre
20 mm
Va
100 mm
2-way plate
Custom-fit multiaxial 3-way
Qts
Custom-fit coaxial 2-way
SRC4696
SRC5736
SRC5716
SRC4617
SRC916
PP
c
91
ium
91
40~80,000
an
28~80,000
3.1
Tit
10.9
1.14
Gla
ss
0.76
85
du
60
35
pro
45
160
tall
yst
ns
ctio
(db
ncy
200
80kHz
icie
80kHz
●
ew
oo
em
)
/m
/W
po
res
cy
Eff
●
●
qu
Fre
en
s)
Va
s (L
itre
un
dt
●
●
un
So
●
●
fer
)
(Hz
nse
OE
ect
dir
or
df
ne
●
20 mm
20 mm
wit
hr
or
ma
gn
wit
De
sig
20 mm
130 mm
we
Po
rfu
l
str
on
tium
ee
ter
fer
do
on
silk
ec
165 mm
Custom-fit coaxial 2-way
Pu
re
Gla
ss
fibr
me
tw
ew
oo
em
yst
ns
ctio
du
pro
Custom-fit coaxial 2-way
Re
SRC1773
SRC1373
SRC1073
SRC1074
SRC4673
et f
hd
ua
ln
eo
dym
ium
ma
g
ne
t
M
ing
rep
ass
Su
f
l
ace
or
res
p
Eu
me
po
an er he
rop
nt
nse
d p at
ea
oly -res
n
car
mid ist
s
e b ant
Ex
ob voic
tre
b
me
ly h in e coil
igh
f
req
Mu
ue
sic
ncy
pe
ak
rep
po
rod
we
Co
uct
r (W
ntin
ion
uo
)
us
po
we
Fs
r (W
(Hz
)
)
Qts
10 × 15 CM (4″ × 6″) CUSTOM-FIT
COAXIAL 2-WAY
r su
rro
un
con
d
e
ew
Pu
wo
re
o
o
o
f
er
silk
fer
do
me
Me
twe
tall
ete
ise
rw
dP
ith
EI
ne
Me
ba
od
lan
tall
ym
ced
ise
ium
dp
-dr
ma
iez
ive
Me
gn
od
twe
et
tall
om
e
ise
t
er
e tw
dP
e
E
e
I ba
Re
ter
arlan
ven
ced
ted
-dr
ive
pie
ce
Po
mid
we
wo
-ra
rfu
ofe
ng
l st
r
e
ron
tium
Ex
m
tre
ag
me
ne
ly h
t fo
igh
rd
yna
fre
qu
Mu
mic
en
sic
ba
c
y re
pe
ss
ak
res
p
r
od
po
po
u
w
Co
nse
c
e
t
r
i
ntin
on
(W
uo
)
us
po
we
Fs
r (W
(Hz
)
)
SRC1074
10 CM (4″) CUSTOM-FIT
COAXIAL 2-WAY
150
35
105
0.71
1.3
40~120,000
90
●
200
35
75
0.78
14.2
35~32,000
92
MI
SRC1073
●
120 kHz
Custom-fit coaxial 2-way
●
●
●
150
30
75
0.84
15.8
35~30,000
91
Custom-fit coaxial 2-way
●
●
●
120
25
100
0.79
4.1
45~30,000
91
Custom-fit coaxial 2-way
●
●
●
60
20
190
1.26
1.8
60~30,000
89
51
Speakers
Phase-1 speakers
SRR1646
16 CM [6″× 1/2″] MULTIAXIAL
4-WAY
SRR1336
13 CM [5 1/4″]
MULTIAXIAL 3-WAY
16 CM [6 1/2″]
MULTIAXIAL 3-WAY
SRR1326
SRR1616
13 CM [5 1/4″]
COAXIAL 2-WAY
16 CM [6 1/2″]
COAXIAL 2-WAY
SRR2036
SRR6916
20 CM [8″] MULTIAXIAL 3-WAY
15 × 23 CM [6″× 9″] MULTIAXIAL
3-WAY
SRR1028
SRH206
10 CM [4″]
COAXIAL 2-WAY
2.5 CM [1″] BALANCED
DRIVE TWEETER
4-/3-way component systems
SRR1726
16.5 CM [6 3/4″] MULTIAXIAL 3-WAY
16.5 CM [6 3/4″] COAXIAL 2-WAY
SCM400
SCM300
4-WAY COMPONENT SPEAKER SYSTEM
3-WAY COMPONENT SPEAKER SYSTEM
52
Multiaxial 3-way
165 mm
Coaxial 2-way
165 mm
50
55
0.58
25.6
25~32,000
92
●
●
●
250
40
60
0.74
30.0
28~32,000
92
●
230
40
75
0.77
10.7
28~32,000
91
●
200
40
75
0.77
10.7
28~30,000
91
mic
ge
yna
ran
rd
mid
-
t fo
ive
)
(Hz
po
icie
ncy
(db
res
cy
en
s)
qu
Fre
Va
s (L
itre
Qts
●
●
●
230
40
75
0.59
9.5
30~32,000
91
130 mm
●
●
●
170
30
85
0.60
4.3
40~32,000
91
●
●
180
25
75
0.48
11.8
30~30,000
91
160 mm
Eff
160 mm
Multiaxial 3-way
Fs
Multiaxial 3-way
Coaxial 2-way
Coaxial 2-way
130 mm
●
●
140
30
85
0.60
4.3
40~30,000
91
Coaxial 2-way
100 mm
●
●
120
30
120
0.70
1.5
45~30,000
90
200
40
2,500~30,000
90
Centre speaker with 50 W amplifier
25mm
●
/W
/m
)
nse
we
r (W
po
ntin
uo
us
ak
pe
sic
)
r (W
)
we
ma
g
tium
ron
ul s
t
we
rf
po
r
ete
twe
un
mo
2-w
ay
ne
-dr
ced
lan
ba
EI
dP
ize
tall
Me
ting
twe
ee
ive
-dr
od
om
e tw
ced
iez
dp
ize
tall
Me
tall
ize
dP
EI
oo
ew
ba
fer
lan
MI
lliz
con
mm
eta
Co
350
Mu
●
Po
●
SRR1636
SRR1336
SRR1616
SRR1326
SRR1028
SRH206
Me
91
PP
92
30~35,000
MI
28~35,000
9.5
an
iu
35.3
0.59
Tit
0.54
75
ed
m
yst
e
ns
du
ctio
pro
55
45
Re
50
280
ter
ete
r
fer
oo
ew
con
PP
)
(Hz
ncy
350
●
●
●
/W
/m
)
(db
res
Eff
icie
cy
en
Fre
qu
Qts
Va
s (L
itre
)
(Hz
Fs
ntin
uo
us
s)
po
po
we
nse
r (W
)
r (W
)
Co
●
ba
ass
mic
b
ran
we
po
ak
pe
l st
sic
rfu
rd
mid
-
ne
t fo
ive
-dr
ron
tium
ced
lan
ba
EI
dP
we
ize
tall
Me
●
ma
g
ee
ter
ge
e tw
ran
om
od
em
id-
dp
EI
ise
dP
tall
ise
tall
iez
con
fer
ew
on
PP
c
MI
●
150 x 230 mm
Multiaxial 3-way
●
Mu
200 mm
●
Po
Multiaxial 3-way
Me
160 mm
Me
150 x 230 mm
Multiaxial 4-way
oo
lliz
mm
eta
an
iu
Tit
Multiaxial 4-way
yna
ge
fer
ew
oo
con
IPP
-M
TM
ed
m
yst
e
ns
du
ctio
pro
Re
SRR6946
SRR1646
SRR2036
SRR6916
SRR1736
SRR1726
ss
res
res
po
po
nse
nse
SRR1736
)
15 × 23 CM [6″× 9″] MULTIAXIAL
4-WAY
SRR1636
(Hz
SRR6946
53