Architectural Specification
Renoir™ Incandescent Architectural Preset Slide Dimmers 120V AC 60Hz Only
Description
Cat. No.
Rating
Color*
Description
Cat. No.
Rating
Color*
Renoir Single-Pole
(narrow fin)
80800
800W
I, W, GY
Renoir Single-Pole
(wide fin)
81500
1500W
I, W, GY
Renoir 3-Way
(narrow fin)
80800-3
800W
I, W, GY
Renoir 3-Way
(wide fin)
81500-3
1500W
I, W, GY
Renoir Single-Pole
(narrow fin)
81000
1000W
I, W, GY
Renoir Single-Pole
(wide fin)
82000
2000W
I, W, GY
Renoir Single-Pole,
Illuminated (narrow fin)
81000-L
1000W
I, W
Renoir Single-Pole,
Illuminated (wide fin)
82000-L
2000W
I, W
Renoir 3-Way
(narrow fin)
81000-3
1000W
I, W, GY
Renoir 3-Way
(wide fin)
82000-3
2000W
I, W, GY
1000W
I, W
Renoir 3-Way, Illuminated 82000-L3
(wide fin)
1000W
I, W
Renoir 3-Way, Illuminated 81000-L3
(narrow fin)
Renoir™ Magnetic Low-Voltage Architectural Preset Slide Dimmers 120V AC 60Hz Only
Description
Cat. No.
Rating
Color*
Renoir Single-Pole
(narrow fin)
71111
1000VA
I, W, GY
Renoir 3-Way
(narrow fin)
71113
1000VA
I, W, GY
Renoir Single-Pole
(wide fin)
71511
1500VA
I, W, GY
Renoir 3-Way
(wide fin)
71513
1500VA
I, W, GY
Note: For complete information on installation, ganging and derating of High Wattage
Dimmers, consult Technical Section of this catalog or the Dimmer Instruction Sheet
provided with the device.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same
phase or run a separate neutral to each phase. Consult Leviton Techline if problems
persist.
When ganging these units, no derating is necessary except on those units, which have
had both sets of snap-off, fins removed. These shall be derated as follows:
81000 series, 71111 series –800 Watts max. per unit
81500 series, 71513 series–1300 Watts max. per unit
82000 series–1800 Watts max. per unit
Dimensional drawings on p. T26
Renoir Architectural Fin Width
Narrow: 2.88" (73.2 mm) — Wide: 4.69" (119.1 mm)
FEATURES & BENEFITS
*COLOR
• ON/OFF rocker switch turns lights ON at last
selected brightness level
• Decora-style screwless snap-on wallplate present an attractive appearance in any application
• Smooth-action, linear slide control for easy,
precise operation
• Slim, compact housing easily fits in standard
wall boxes
• Available in single-pole (one location) and
3-way (multi-location) versions. 3-way dimmer
is used with standard 3-way ON/OFF switch
• Fins are easily removed for multi-gang
applications
• Decora-styling coordinates with Leviton’s
extensive line of Decora devices
• Illuminated versions available
• Large radio/TV interference filter
Add suffix to catalog number as follows for color
selections: Ivory (-I), White (-W), Gray (-G).
Note: For fin removal and switchbox requirements for ganging Leviton Renoir dimmers, refer to Technical Section of
this catalog or the instruction sheet provided with the
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
B8
Architectural Specification
Monet™ Architectural Specification Grade Controls 120V & 277V AC 60Hz
Low-profile Architectural Decora Digital Preset Slide Controls with LED locator light. All Monet controls provide single-pole (1 location) and 3-way
(multi-location) control with Switching Remote, plus Scene Capability when used with Scene Controller unit.
Fan Speed Controls
Incandescent
Description
Cat. No.
Rating
Color*
Description
Cat. No.
Rating
Color*
Monet Dimmer (narrow fin)
MNI06-1L
600W 120V AC
Incandescent
I, W, G, E, A
Monet Fan Speed Control
(narrow fin)
MNF07-1L
7.5A 120V AC
I, W, G, E, A
Monet Dimmer (narrow fin)
MNI10-1L
1000W 120V AC
Incandescent
I, W, G, E, A
Monet Fan Speed Control
(wide fin)
MNF10-1L
10A 120V AC
I, W, G, E, A
Monet Dimmer (wide fin)
MNI15-1L
1500W 120V AC
Incandescent
I, W, G, E, A
Description
Cat. No.
Rating
Color*
Monet Remote Switching
Unit for 3-way applications
MN00R-10W
No load rating,
use with Monet
dimmers only
White,
for other
colors
use Color
Change Kits
Color Change Kits for
MN00R-10W Monet
3-way switching unit
MNK0R-00
Monet Adapter Plate: Allows
any Decora strap-mount
device to be ganged with
either small or large-size
Monet controls
MN0LA-000
(large)
MN0SA-000
(small)
Magnetic Low-Voltage
Description
Cat. No.
Rating
Color*
Monet Dimmer (narrow fin)
MNM06-1L
600VA 120V AC
I, W, G, E, A
Magnetic Low-Voltage
Monet Dimmer (narrow fin)
MNM10-1L
1000VA 120V AC
I, W, G, E, A
Magnetic Low-Voltage
Monet Dimmer (wide fin)
MNM15-1L
1500VA 120V AC
I, W, G, E, A
Magnetic Low-Voltage
Mark X™ Fluorescent Ballast
For Advance Mark X™/Philips Ecotron™ fluorescent dimming ballasts.
Description
Cat. No.
Rating
Color*
Monet Mark X Fluorescent
Dimmer (narrow fin)
MNX10-1L
1000VA 120V AC
I, W, G, E, A
Monet Mark X Fluorescent
Dimmer (wide fin)
MNX15-1L
1500VA 120V AC
I, W, G, E, A
Monet Mark X 277V
Fluorescent Dimmer
(narrow fin)
MNX10-7L
1000VA 277V AC
I, W, G, E, A
Monet Mark X 277V
Fluorescent Dimmer
(wide fin)
MNX15-7L
1500VA 277V AC
I, W, G, E, A
Monet™ Products
I, W, G, E, A
—
—
Metal
Heat Sink
Note: Mark X™ is a trademark of the Advance Transformer Company. Ecotron™ is a
trademark of Philips Electronics North America Corporation.
Note: Multi-gang wallplates are available for combining narrow and wide dimmers, with or
without fins removed. Refer to Technical Section of this catalog for ordering information.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same
phase or run a separate neutral to each phase. Consult Leviton Techline if problems
persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow
the wiring instructions included with each device. They can be used in conventional 3way and 4-way wiring circuits only when the Control is properly connected to the load
as indicated by the device's wiring instructions.
Dimensional drawings on p. T26
Monet Architectural Fin Width
Narrow: 2.75" (69.9 mm) — Wide: 4.25" (108.0 mm)
*COLOR
FEATURES & BENEFITS
• Premier Architectural Specification Grade
dimmer combines high load capability, esthetic
appearance, digital circuitry and Scene Lighting
capabilities
• Provides single-pole and 3-way switching with
Monet Remote Unit
• Can be used with 6-scene controller for scene
lighting applications
• Low-profile architectural fins (even on wide-fin
models) for a flush fit appearance
• Smooth slide-dimming operation. Push slider
for ON/OFF preset
• Digital circuit provides Soft-ON/Fade-OFF for
eye-pleasing effect and prolonged bulb life
• Specially designed to minimize shadows with
non-reflective, easy-to-clean matte finish. Ideal
for museums, art galleries, showrooms
• Soft, green locator LED discretely positioned
on slider
• Square Law Dimming ensures linear slide control across entire dim and bright output range
• Hidden air-gap switch; slider moves into
hidden keyway to access air-gap switch for
servicing needs
• Small and large size adapter plates fit all Leviton
Decora straps to make them compatible with
Monet wallplates
• Screwless, designer Monet wallplates with
matte finish included. Multi-gang wallplates
also available for combining narrow and wide
dimmers, with or without fins removed (See
Technical Section for more information)
• Customized wallplate engraving available.
See your Leviton representative for more
information
• Built-in radio/TV interference filter
• Protected memory during temporary power
failures
• Internal MOV for surge protection
Add suffix to catalog number as follows for color
selections: Ivory (-I), White (-W), Gray (-G),
Almond (-A), Black (-E).
• Use with Leviton DPSPE-112 Power Extender to
extend load capacity to 2000W (2000VA) for incandescent, magnetic low-voltage and Advance Mark
X™ fluorescent dimming ballasts.
• Use with Leviton DPSPE-212 Power Extender to
extend load capacity to 2000VA for Advance Mark
VII™ and Motorola Helios™ fluorescent ballasts.
Note: For fin removal and switchbox requirements for ganging Leviton Monet dimmers, refer to Technical Section of
this catalog or the instruction sheet provided with the
device.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
B4
Ganging and Derating Box-Mounted
Lighting Controls
Ganging is an installation practice where two or more lighting
controls are mounted side-by-side using the required number of
connected wallboxes. Ganging may require the removal of part of
the fins on Architectural Dimmers or part of the mounting strap on
strap-mounted devices. In Architectural Dimmers, the metallic
fins help dissipate heat from within the device. Strap mounted
dimmers use the mounting strap for the same purpose. Therefore,
removing a portion of the fins or strap for ganging purposes will
require derating the dimmers to prevent them from overheating.
Maximum Load Per Dimmer for Multi-Ganging
All Strap-Mounted Dimmers
Chart 1
Dimmer Rating
Single
2-Gang
More than 2-Gang
600W
600W
500W
400W
1000W
1000W
800W
700W
600VA
600VA
500VA
400VA
1000VA
1000VA
800VA
700VA
Maximum Bulb Wattage for Magnetic
Low-Voltage Lighting
Ganging and Derating Leviton
Lighting Controls
When ganging Mural, True Touch, TouchPoint, ToggleTouch and
IllumaTech controls, the side sections of the mounting strap
must be removed. Use pliers to carefully bend side sections
back and forth until they break off. The side sections of the strap
dissipate heat, so removing them requires derating the dimmer’s
capacity. See Chart 1.
Note that Leviton SureSlide and Trimatron lighting controls can
be ganged without removing any sections of their mounting
straps. However, SureSlide and Trimatron controls must also be
derated when they’re ganged.
Low-voltage lighting controls are rated in Volt-Amps (VA). The
maximum bulb wattage is determined by the efficiency of the
transformer in the low-voltage lighting system. Transformer efficiencies vary depending on the manufacturer, so consider 75%
efficiency as average. Use Chart 2 to determine the maximum
bulb wattage for typical transformer efficiency ratings.
Maximum Bulb Wattage at 75% Efficiency
Chart 2
Dimmer Rating
Single
2-Gang
More than 2-Gang
600VA
450VA
375VA
300VA
1000VA
750VA
600VA
525VA
Ganging and Derating Leviton Renoir™ and Van Gogh™ Architectural Lighting Controls
6678-1, 6678-7, 6679-1, 6679-7, 61500,
62000, 71511, 71513, 81500, 81500-3,
81527, 82000, 82000-3, 86678-1, 86678-7,
86779-1, 86779-7
6676-1, 6676-7, 6677-1, 6677-7, 60800, 61000,
61000-3, 71111, 71113, 80800, 80800-3,
80827, 81000, 81000-3, 81127, 86676-1,
86676-7, 86777-1, 86777-7
To Double Gang Narrow Controls
Break off right set of fins on one dimmer and
left side of fins on the other dimmer.
Two-gang outlet box is required.
To Triple Gang Narrow Controls
Break off right set of fins on first dimmer,
both sets of fins on center dimmer, and left
set of fins on third dimmer. Three-gang box is
required.
Double-Ganging Wide Controls
Break off right set of fins on one
dimmer and left set of fins on the
other dimmer. Requires threegang outlet box. No derating
necessary.
Triple Ganging Wide Controls
Break off right set of fins on first
dimmer, both sets of fins on the
middle dimmer, and left set of
fins on third dimmer. Five gang
outlet is needed.
Switch boxes required
for ganging Leviton
architectural controls
when no fins are removed:
Switch boxes
required for
ganging Leviton
architectural
controls when all
inside fins are
removed:
Number of Narrow Controls*
Number of Wide Controls
Cat. No’s.
FIN BREAKOFF POINTS
FOR NARROW CONTROLS
0
0
2
3
4
0
•
•
•
•
•
1
1
3
5
7
8
2
4
6
7
9
11
3
7
9
10
11
13
4
9
11
12
14
16
0
0
1
2
3
4
5
6
0
0
1
2
3
4
5
6
1
1
3
4
5
6
7
8
2
3
5
6
7
8
9
10
3
5
7
8
9
10
11
12
4
7
9
10
11
12
13
14
5
9
11
12
13
14
15
16
6
11
13
14
15
16
17
18
*Narrow controls must have fins broken off to be ganged. See ganging
instructions for narrow controls on this page.
Note: When ganging combinations of small and large controls without removing
fin sections, mount small control on one end, large control on the other end.
T7
1
Number of Narrow Controls
Number of Wide Controls
Cat. No’s.
FIN BREAKOFF POINTS
FOR WIDE CONTROLS
When fins are broken off on wide and narrow controls for ganging purposes, the number of switch boxes required can be
quickly determined by referring to the two charts below. For
example, when ganging a 2000 watt Cat. No. 82000 with a
1000 watt Cat. No. 81000 and no fins are going to be removed,
3 switch boxes will be required as shown in the top chart.
Likewise, you can refer to the bottom chart to determine how
many switch boxes are required when all inside fins are being
removed.
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com
Derating
Any Architectural Dimmer that has had both sets of break-off fins removed to meet space requirements during installation must have
its wattage specification derated as shown in the chart below. If no fins are removed, no derating is necessary, even when ganging.
Incandescent
Fluorescent
Cat. No.
Watts
Derate To
61000, 81000
1000
800W
When ganging these units, no derating is necessary, except as
shown below when both sets of fins have been removed.
61500, 81500
1500
1300W
6677 – 16 lamps
86677 – 16 lamps
1800W
6679 – 36 lamps
86679 – 36 lamps
62000, 82000
2000
Ganging and Derating Leviton Monet™ Lighting Controls
Multi-Gang Installation
No Fins Broken Off
CAUTION: Do not gang dimmers vertically (one directly above
another).
• It is recommended to install dimmers without breaking off fins
whenever possible so that derating is not necessary, even
when ganging. If an installation requires breaking off fins for
space requirements, derating is required.
• When ganging combinations of narrow and wide dimmers
and ordering a custom wallplate, all narrow dimmers are
required to be at one end of the gang, and all wide dimmers
are required to be at the other end of the gang.
• Adapter plates (Cat. No. MN0LA or MN0SA) available for
multi-gang installations using any Leviton Decora®-style
device.
No Fins Broken Off
Table 1 – Outlet Box Requirements
Wide
Narrow Controls (600W/VA, 1000W/VA, 7.5A)
Controls
0
1
2
3
4
5
6
(1500W/VA,10A)
0
1
2
3
4
0
1
4
7
9
1
4
6
9
3
5
8
10
5
7
9
6
8
9
10
10
Fins Broken Off
Table 2 – Outlet Box Requirements
Wide
Narrow Controls (600W/VA, 1000W/VA, 7.5A)
Controls
0
1
2
3
4
5
6
7
8
9
(1500W/VA,10A)
Refer to Table 1 for the size and number of outlet boxes required
for multi-gang installations.
A multi-gang masonry box or a multi-gang switch box with a
raised cover are recommended for easy installation, although
standard outlet boxes will work. No derating is necessary.
Example of 5-Gang Outlet box with 3 Narrow Dimmers and No
Wide Dimmers (note mounting holes).
0
1
2
3
4
5
0
1
3
5
7
9
1
3
5
7
9
2
4
6
8
10
3
5
7
9
4
6
8
10
5
7
9
6
8
10
7
9
8
10
9
Maximum Load Per Monet Dimmer Multi-Gang
with Fins Broken Off
Table 3
Fins Broken Off
Refer to Table 2 for the size and number of outlet boxes required
for multi-gang installations when all inside fins are removed.
NOTE: The fins on the dimmers have special break-off points
that allow removal of partial fin sections for ganging. Use pliers
to carefully bend fin sides back and forth until they break off.
(See Figure 2). These sections should only be removed at the
break-off point to permit proper ventilation. DO NOT remove
side sections on extreme ends of the gang.
Example of 3-Gang Outlet box with 3 Narrow Dimmers and No
Wide Dimmers (note mounting holes).
Cat. No.
Single
2-Gang
More than 2-Gang
MNI06
600W
500W
400W
MNI10
1000W
800W
700W
MNI15
1500W
1250W
1000W
MNM06
600VA
500VA
400VA
MNM10
1000VA
800VA
700VA
MNM15
1500VA
1250VA
1000VA
MNX10
1000VA
800VA
700VA
MNF07
7.5A
6A
5.3A
MNF10
10A
8A
7A
Break-Off Fins
(Side Sections)
Light Bar
Slider
Mounting Strap
Figure 1 – Dimmer Function
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
Figure 2 – Break-Off Fin Removal
T8