EDWARDS
520Hz
HIGH FIDELITY | LOW FREQUENCY
S
H i g h
O
L
U
T
I
O
N
S
F i d e l i t y
H i g h
Wall Speakers,
Speaker-Strobes
Genesis G4HF Series
F i d e l i t y
Ceiling Speakers,
Speaker-Strobes
Genesis GCHF Series
Ceiling Speaker Ordering Guide
Wall Speaker Ordering Guide
High Fidelity Ceiling Speaker/Speaker-strobe
High Fidelity Wall Speaker/Speaker-strobe
Omit for speaker only
Omit for speaker only
G4HF R F-S2 VM C
W for white housing
R for red housing
F for FIRE marking
A for ALERT marking
N for no marking
C for clear lens
A for amber lens
VM for selectable
standard cd output
S7 for 70 V model
S2 for 25 V model
Consult Data Sheet 85001-0641 for specifications and ordering information.
Genesis Series high fidelity speakers
and speaker-strobes are part of an
end-to-end audio system solution
for low frequency signaling. These
versatile notification appliances
combine high performance output
with a low profile design to deliver
a life safety audio solution that’s as
versatile as it is effective. Protruding
about an inch from the mounting
surface, they blend inconspicuously
with any decor.
GCHF R F-S2 VM C H
C for clear lens
A for amber lens
W for white housing
R for red housing
VM for selectable standard cd output
Add H for selectable high cd output
F for FIRE marking
A for ALERT marking
N for no marking
S7 for 70 V model
S2 for 25 V model
Consult Data Sheet 85001-0641 for specifications and ordering information.
G4HF and GCHF high fidelity speakers meet NFPA 72 standards for
commercial sleeping areas where
audible appliances are provided. They
also produce crisp, clear voice audio
output that is highly intelligible over
large areas. They are ideal for hotels,
dormitories, and other sleeping occupancies where supplementary audible
output is necessary.
Typical Wiring, High Fidelity Speaker-Strobe
Optional amber lens tints, ALERT
or FIRE markings, and red or white
housing colors ensure there is a device
for every application, including mass
notification and emergency communications.
settings remain clearly visible — even after final
installation, which allows devices to be easily
fine-tuned to achieve maximum benefit in exchange for the lowest possible system overhead.
Web: www.edwardsfiresafety.com
© 2015 United Technologies Corporation. All rights reserved. Specifications subject to change without notice.
EDWARDS is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.
09/04/15
Email: edwards.fire@fs.utc.com
These appliances are capable of
generating the distinctive factorysupplied 520 Hz signal that results
in excellent waking capabilities,
superb sound penetration, and an
unmistakable warning of danger. To
meet current codes, ensure that the wattage
tap of the speaker is set sufficiently high so that
the sound pressure reaches 75 dBA-fast at the
pillow. Consult current codes or your Authority
Having Jurisdiction for details.
85000-0396
Speakers feature selectable wattage taps, while
speaker-strobes allow for both wattage and light
output levels to be configured in the field. Both
Add H for selectable
high cd output
EDWARDS
520Hz
HIGH FIDELITY | LOW FREQUENCY
S
L o w
F r e q u e n c y
5 2 0
O
L
U
T
I
O
N
L o w
H z
Horns,
Horn-strobes
Genesis G4LF Series
Horn Ordering Guide
S
F r e q u e n c y
5 2 0
H z
Sounder Bases
for Intelligent Detectors
Sounder
Base
Compatible
Detectors
Application
Fire
Fire/CO
SB4U-LF
520 Hz Low frequency horn, horn-strobe
G4LF R F-HVM
W for white housing
R for red housing
F for FIRE marking
A for ALERT marking
N for no marking
V-Series
FX Series
ü
HVM for selectable 15,
30, 75, or 110 cd output
H for horn only
SIGA-AB4G-LF
SIGA2 Series
V-PCOS
Consult Data Sheet 85001-0639 for specifications and ordering information.
G4LF Series notification appliances provide the benefits of Genesis life
safety signals with output suitable for applications requiring low frequency
audible tones. These high-performance appliances generate a crisp 520
Hz tone in the standard 3-3 temporal pattern. An optional setting configures the appliance for continuous audible output — a critical feature for
notification appliance circuits that are coded with a CDR-3 coder module.
G4LF appliances also feature field-configurable high and low dB output
settings.
When connected to compatible EDWARDS control equipment, G4LF
Series audible output remains synchronized with all Genesis audible
signals on the same Notification Appliance Circuit, including standard 3.2
kHz Genesis audible signals.
Available G4LF models include audible-only appliances, as well as combination audible-visible signals. Horn-strobe devices feature field-configurable candela output. When connected to a compatible synchronization
source, Genesis strobes synchronize to within 10 milliseconds indefinitely
without the need for external modules or other equipment.
ü
ü
SIGA Series
GSA Series
Low frequency sounder bases provide 520 Hz output suitable for applications requiring low frequency audible tones. These bases can operate
as independent local alarms, or as part of a zone or system alarm with
synchronized audible output.
Two models are available:
SIGA-AB4G-LF bases provide low frequency sounder capability for the
SIGA2 Series and V-PCOS smoke and CO detectors, as well as SIGA
and GSA Series smoke detectors. For CO applications, a Temporal Pattern Generator is required to control output based on event type, i.e.: T-3
pattern for fire events; T-4 pattern for CO events.
SB4U-LF bases provide low frequency sounder capability to V-Series
and FX-Series smoke detectors.
Web: www.edwardsfiresafety.com
© 2015 United Technologies Corporation. All rights reserved. Specifications subject to change without notice.
EDWARDS is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.
09/04/15
Email: edwards.fire@fs.utc.com
85000-0396
All sounder bases match the finish of compatible devices, and the sound
output slots complement the air entry openings of the detector. The end
result is a compact unit with an attractive appearance.