E-Mail Print Separately Mounted Fire Pump Automatic Transfer Switches AVAILABLE Network Power Close Separately Mounted Fire Pump Automatic Transfer Switches General Information Description Firetrol® brand Separately Mounted Fire Pump Automatic Transfer Switches are designed for use when pump room size constraints will not allow an integral controller/transfer switch configuration, or where a transfer switch is now being required on an existing installation. They are intended for use with Listed and Approved fire pump controllers. Approvals Firetrol® Separately Mounted Fire Pump Automatic Transfer Switches are listed by Underwriters’ Laboratories, Inc., for transfer switch service and also meet the requirements of NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection and NFPA 70, National Electrical Code. The transfer switches are listed by Underwriters Laboratories, Inc. under UL-1008, Automatic Transfer Switches, as well as UL-508, Industrial Control Equipment. They are approved by the City of New York for fire pump service. Enclosures The standard enclosures are NEMA Type 2 (IEC IP11), drip-proof for installation in areas protected from direct sunlight with an ambient temperature above 41° F (5° C). Optional enclosure types include: – NEMA Type 3R (IEC IP14), Painted Steel – NEMA Type 4 (IEC IP56), Painted Steel – NEMA Type 4X (IEC IP56), #304 Stainless Steel, Natural Finish ** – NEMA Type 4X (IEC IP56), #304 Stainless Steel, Painted Finish – NEMA Type 4X (IEC IP56), #316 Stainless Steel, Natural Finish ** – NEMA Type 4X (IEC IP56), #316 Stainless Steel, 12 Gauge, Seam Welded, Polished and Brushed Finish – NEMA Type 4X (IEC IP56), #316 Stainless Steel, Painted Finish – NEMA Type 12 (IEC IP52), Painted Steel NEMA enclosures listed meet or exceed referenced IEC designations. 2 721250$/ 87,/,7< 32:(5 6285&( 72 *(1(5$725 $/7(51$7( 32:(5 6285&( 1250$/ 6285&( ',6&211(&7 ,1*0($16 $1' 29(5&85 5(17 3527(&7,9( '(9,&(6 $/7(51$7( 6285&( ,62/$7,1* 6:,7&+ 1250$/ (0(5*(1&< /2$' ),5(3803 &21752//(5 )7$ ),5(3803 ,62/$7,1* 6:,7&+ ),5(3803 &,5&8,7 %5($.(5 02725 &217$&7256 02725 Configurations Firetrol Separately Mounted Automatic Transfer Switches are available in the following configurations: FTA902 – Provides the transfer of 3-phase power to a fire pump controller between a utility on the normal side and a generator on the alternate (emergency) side. The disconnecting means and overcurrent protective devices required for the normal side of the transfer switch are NOT supplied. Separately Mounted Fire Pump Automatic Transfer Switches General Information 721250$/ 87,/,7< 32:(5 6285&( 72 *(1(5$725 $/7(51$7( 32:(5 6285&( 721250$/ 87,/,7< 32:(5 6285&( 1250$/ 6285&( ',6&211(&7 ,1*0($16 $1' 29(5&85 5(17 3527(&7,9( '(9,&(6 1250$/ 6285&( ,62/$7,1* 6:,7&+ 1250$/ 6285&( &,5&8,7 %5($.(5 1250$/ $/7(51$7( 6285&( ,62/$7,1* 6:,7&+ $/7(51$7( 6285&( ,62/$7,1* 6:,7&+ (0(5*(1&< /2$' ),5(3803 &21752//(5 72 1'87,/,7< $/7(51$7( 32:(5 6285&( $/7(51$7( 6285&( &,5&8,7 %5($.(5 )7$ 1250$/ (0(5*(1&< /2$' )7$ ),5(3803 ,62/$7,1* 6:,7&+ ),5(3803 &21752//(5 ),5(3803 &,5&8,7 %5($.(5 ),5(3803 ,62/$7,1* 6:,7&+ 02725 &217$&7256 ),5(3803 &,5&8,7 %5($.(5 02725 &217$&7256 02725 02725 FTA903 – Provides the transfer of 3-phase power to a fire pump controller between a utility on the normal side and a generator on the alternate (emergency) side. The disconnecting means and overcurrent protective devices required for the normal side of the transfer switch ARE provided. FTA952 – Provides the transfer of 3-phase power to a fire pump controller between a utility on the normal side and a 2nd utility on the alternate (emergency) side. The disconnecting means and overcurrent protective devices required for the normal side are NOT supplied. The disconnecting means and overcurrent protective for the alternate (emergency) side ARE supplied. 3 Separately Mounted Fire Pump Automatic Transfer Switches General Information Features Firetrol Separately Mounted Automatic Transfer Switches feature the 4 7000 series transfer switch with Group 5 controller as standard. The microprocessor based controller includes a built-in keypad and four line LCD display mounted through the enclosure door. This allows all monitoring and control functions to be done with the door closed, providing convenience and safety. The menu driven user interface allows setting changes to be made easily. These settings include: • Voltage and Frequency • Time Delays • Features • Engine Exerciser • Event Log • Service Features 72 1'87,/,7< $/7(51$7( 32:(5 6285&( 721250$/ 87,/,7< 32:(5 6285&( 1250$/ 6285&( ,62/$7,1* 6:,7&+ 1250$/ 6285&( &,5&8,7 %5($.(5 1250$/ $/7(51$7( 6285&( ,62/$7,1* 6:,7&+ $/7(51$7( 6285&( &,5&8,7 %5($.(5 (0(5*(1&< /2$' ),5(3803 &21752//(5 )7$ ),5(3803 ,62/$7,1* 6:,7&+ ),5(3803 &,5&8,7 %5($.(5 02725 &217$&7256 02725 FTA953 – Provides the transfer of 3-phase power to a fire pump controller between a utility on the normal side and a 2nd Utility on the alternate (emergency) side. The disconnecting means and overcurrent protective devices required for the normal side and alternate side of the transfer switch ARE provided. 4 7000 Series User Interface Ordering Information When ordering for an existing fire pump controller, the Voltage, Horsepower, Brand, Model # and serial number of the Fire Pump Controller is required to insure proper sizing. XXXGJSFUSPMDPN 4BMFT0GGJDF$BSZ/$64" CB902-01 (1-29-06) $6&2