The Bright Choice Multi-Aim Collection Contrast Lighting is synonymous with confidence and offers you a vast array of recessed and pendant luminaires, decorative glass lamp shades and wall mounts; all manufactured in Québec and all of the highest quality. Company excellence is evidenced in its totally vertical manufacturing integration and its numerous environmentally friendly products that contribute towards the protection of the environment. The Multi-Aim Collection Contrast Lighting respected its high quality standards when designing the Multi-Aim Collection. These luminaires offer 4-head bi-directional LED, MR16 or PAR halogen lighting that can be aimed separately to respond to all application requirements. Each lamp head can be powered individually. This collection went through a rigorous development process to ensure total reliability. The Multi-Aim Collection is suitable for architectural applications such as boutiques, residences, office spaces, museums, hotels and many other applications. The luminaires, made for installation in new construction, can be mounted in ceilings where access is difficult thereby allowing ease of maintenance. Also, not only do they heighten all interior décor, they provide accent lighting that enhances architectural elements deserving of notice. Housing The housing is made of galvanized steel and is painted. It includes universal mounting supports and mounting bars that are suitable for both permanent and suspended ceilings. Standard housing finishes are black or white to blend with any décor while providing the same exceptional lumen output. The style of the housing provides an opening at the back for maximum heat dissipation. Since the housing adheres perfectly into the ceiling, there is no light leakage. Trims The housing comes in three trim finishes; black, white and grey and are 1½” wide. The trim conceals all hardware found inside the housing that would otherwise be visible from any visual angle. To adapt to a minimalist décor, the luminaires are also available without a trim. A perforated wire mesh plate can be ordered for use in a gypsum or plaster ceiling and then covered with joint compound that is applied to the edge of the housing to obtain a clean edge. This method gives your ceiling the desired minimalist effect. Recessed Double Gimbal This is a revolutionary concept on the market. Multi-Aim incorporates the famous double gimbal that allows one to get an incomparable visual cut-off. The LED or MR16 lamp heads rotate in both angles 30° vertically and horizontally which gives one the option of accenting objects from different angles in the room. Once positioned, the heads can be locked in place to maintain the light adjustment. 3-Lamp LED Model versus 4-Lamp MR16 Model The Multi-Aim 3-lamp LED and 4-lamp MR16 models have the same footprint. The LED lamp heads are slightly bulkier because of the heat sink which allows excellent heat dissipation and yields a maximum lamp life. Head adjustment is easy because of the extra space. Furthermore, a 3-head LED luminaire allows you to save 75% of energy cost per luminaire annually. 3-Lamp LED Model A single auto-leveling screw allows a flush with the ceiling installation even if the ceiling is not level. 4-Lamp MR16 Model Contrast Lighting / Multi-Aim Collection 1 Multi-Aim LED DEDICATED LED Our collection of Multi-Aim LED luminaires consists of specialized LEDs that consume nearly 3 times less energy while yielding an exceptional light output. The LED series from Contrast Lighting is designed to yield the maximum in performance and versatility. You use less energy, your cost of maintenance is reduced and you protect the environment, all without comprising product quality. Also, light from LEDs emits no ultraviolet rays. 2 Contrast Lighting / Multi-Aim Collection 50,000 Lamp Comparison Chart 64 25,000 10 2,000* 65BR30 Incandescent 17 15 3,500* 35W MR16 Halogen MR16 GUS.3 12V c.a. LED *Lamp breakage at 50% of nominal lamp life shown LED Average lamp life (hours) Efficiency (Lm/W) LED ENGINE LED Driver The Multi-Aim LED engine consists of a driver and a LED module composed of a heat sink as well as a chip. The LED module comes in three color temperatures 2700°K, 3000°K and 4000°K and is installed on the heat sink. The Magtech LED driver is found in Multi-Aim products. UL8750, Class 2, it is designed to provide a continuous current and is adaptable to both dry and damp locations in interior applications. It meets IP66 standards and is well-suited to standard junction box installations. Once fully charged, the LED driver has a power factor of 0.98+ at 115V c.a. The pilot has a 5-year warranty. Heat Sink The heat sink inside a LED luminaire is without a doubt its most important feature. Temperature control, more precisely the heat dissipation, is crucial because without it lumen output depreciates quickly and its average lifespan decreases dramatically. For this reason, Multi-Aim is equipped with the most innovative aluminum heat sink and its design allows heat to clear efficiently; because of this, we are able to provide a 5-year warranty on the LED module. Also, our heat sink ensures that light intensity is 70% of the initial lumen value after a period of 50,000 hours (L70@ 50,000 hrs). Chip The Bridgelux Vero18 chip is the latest in Solid-State Lighting Technology. This new generation of chips obtains higher efficiency and performance that increase luminous flux in many different applications. It has a long lifespan and draws its power from a direct current. Maintenance Green Product The LED driver and the heat sink module are easily accessible from the ceiling. Two cables allow it to be suspended from the ceiling when replacing any components (as shown on the opposite page). Consequently, all maintenance can be easily done on site. In retail store applications, the most frequently used lamps are usually 90W PAR38 and 50W MR16. Replacing these units by a Multi-Aim will save hundreds of dollars during the luminaire’s lifespan. Since Multi-Aim LED consumes 80% less energy than 90W halogens and 85% less than a 50W halogen; its lifespan is 50,000 hours compared to the lifespan of a 35W MR16 at 3,500 hours. Multi-Aim qualifies as a green product. Moreover, the time between lamp replacement is extended significantly and the number of lamps found in burying sites decreases substantially. Dimming Multi-Aim luminaires can be used with low voltage electronic dimmers to save on energy. To see the list of compatible dimmers please visit our website at www.contrastlighting.com. Warranty and Classification The LED driver and LED modules in our luminaires are covered by a 5-year warranty. The luminaire conforms to LM79 and LM80 standards and is cUL and UL approved. Contrast Lighting / Multi-Aim Collection 3 Multi-Aim LED Features • Unit available with 1 to 4 lamp heads • Useful lamp life: 70% initial lumens after 50,000 hours • Butterfly brackets are used with mounting bars that can be lengthened from 14-1/4" (362 mm) to 26" (660 mm) • Suitable for electrical metal tubes of 1/2" (13 mm) and to a “C” bar (neither is included) • Products ship within a few days only LED Series Power Options Beam Options Dimmable CRI Voltage Wattage Power 1 (35W MR16, 50W PAR20) Power 2 (Equivalent 50W IR MR16, 75W PAR30) Wide Flood (35°) Very Wide Flood (45°) Requires ELV dimmer. Consult www.contrastlighting.com for compatibility chart. Minimum of 80 120 V or 277V. (277V only available in Power 2) Power 1: 9W Power 2: 16W Dimensions Product NWMA1LED (1 head) NWMA2LED (2 heads) NWMA3LED (3 heads) NWMA4LED (4 heads) (A) Length* 14-3/4" (375 mm) (B) Width* 13 -13/32" (341 mm) (C) Height 6" (152 mm) 20-3/4" (527 mm) 13-13/32" (341 mm) 6" (152 mm) 26-3/4" (679 mm) 13-13/32" (341 mm) 6" (152 mm) 32-3/4" (832 mm) 13-13/32" (341 mm) 6" (152 mm) (D) Ceiling Cutout** 7-3/8" x 6-3/8" (187 mm x 162 mm) 15-1/8" x 6-3/8" (384 mm x 162 mm) 21-1/8" x 6-3/8" (537 mm x 162 mm) 27-1/8" x 6-3/8" (689 mm x 162 mm) *Overall dimensions without adjustable mounting bars. **Add 1/8” to each side of the ceiling opening when trimless metal mesh plate is used. A 15 22 C 11 D E B SF Trims and mesh plate (trimless) Distance centre-to-centre 6" (152 mm) 4 Contrast Lighting / Multi-Aim Collection Compatible Trim MAR1-LED MAR2-LED MAR3-LED MAR4-LED Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: EXAMPLE: NWMA1LED1-2W1-22 NW MA New Construction Housing MultiAim Series _ LED Number of Heads LED Lighting 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads Input Voltage 1 = 120V 2 = 277V _ Color Temperature Option 2 = 2700 K 3 = 3000 K 4 = 4000 K Multi-Aim Trim W=Wide Flood V =Very Wide Flood 1= Power 1 2= Power 2 Housing Color 11 =Matte white 22 =Matte black TRIMLESS: Example: MAR1-LED-SF _ Trim Color* MAR1-LED=1 head MAR2-LED=2 heads MAR3-LED=3 heads MAR4-LED=4 heads Power Option 277V only available in Power 2) TRIM: EXAMPLE: MAR1-LED-22-11 _ Beam Type Option 11 =Matte White 15 =Metallic Grey 22 =Matte Black OR Housing Color 11 =Matte White 22 =Matte Black Trimless Multi-Aim MAR1-LED-SF=1 head MAR2-LED-SF=2 heads MAR3-LED-SF=3 heads MAR4-LED-SF=4 heads * Marine Grade finish available. For more information please contact factory. See picture of trims on page 4. Photometry NWMA1LED1-3W1 CANDLEPOWER DISTRIBUTION 90° 183 550 60° 917 30° 0° CONE OF LIGHT LUMINAIRE Distance FC Dia. 04' 64.2 2.6' 05' 41.1 3.2' 06' 28.5 3.8' 07' 21.0 4.5' 08' 16.0 5.1' 09' 12.7 5.8' 10' 10.3 6.4' 11' 8.5 7.0' Beam: 36° Beam Edge defined as 50% of Maximum Nadir Candlepower LED Power 1 CBCP Lumens Input Watts Operating AMPS Lumen Maintenance CRI Lumens/Watt Spacing Criteria COEFFICIENT OF UTILIZATION 3000K Wide Flood 1027 504 120V 277V 9W9W 0.075A 0.032A L70 @ 50 000 hrs Over 80 56 0.61 Equivalent lamps: 35W MR16, 50W PAR20 eiling Reflectance 80% Wall Reflectance 70 50 RCR 0 119119 2 109 104 4 100 93 6 91 83 8 84 75 10 77 69 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % NWMA1LED1-4V1 CANDLEPOWER DISTRIBUTION 90° 200 465 60° 700 30° 0° CONE OF LIGHT LUMINAIRE Distance FC Dia. 04' 57.9 3.4' 05' 37.1 4.2' 06' 25.8 5.0' 07' 18.9 5.9' 08' 14.5 6.7' 09' 11.4 7.6' 10' 9.3 8.4' 11' 7.7 9.2' Beam: 46° Beam Edge defined as 50% of Maximum Nadir Candlepower LED Power 1 CBCP Lumens Input Watts Operating AMPS Lumen Maintenance CRI Lumens/Watt Spacing Criteria COEFFICIENT OF UTILIZATION 4000K Very Wide Flood 927 571 120V 277V 9W9W 0.075A 0.032A L70 @ 50 000 hrs Over 80 63 0.78 Equivalent lamps: 35W MR16, 50W PAR20 Ceiling Reflectance 80% Wall Reflectance 50 30 RCR 0 119119 2 104 100 4 92 87 6 82 77 8 74 68 10 67 62 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % NWMA1LED1-4V2 CANDLEPOWER DISTRIBUTION 90° 400 950 60° 1400 30° 0° CONE OF LIGHT LUMINAIRE Distance FC Dia. 04' 117.0 3.4' 05' 74.9 4.2' 06' 52.0 5.0' 07' 38.2 5.9' 08' 29.3 6.7' 09' 23.1 7.6' 10' 18.7 8.4' 11' 15.5 9.2' Beam: 46° Beam Edge defined as 50% of Maximum Nadir Candlepower LED Power 2 CBCP Lumens Input Watts Operating AMPS Lumen Maintenance CRI Lumens/Watt Spacing Criteria COEFFICIENT OF UTILIZATION 4000K Very Wide Flood 1872 1152 120V 277V 16W 16W 0.13A 0.057A L70 @ 50 000 hrs Over 80 72 0.78 Equivalent lamps: 50W IR MR16, 75W PAR30 Ceiling Reflectance 80% Wall Reflectance 50 30 RCR 0 119119 2 104 100 4 92 87 6 82 77 8 74 68 10 67 62 Zonal Cavity Method Effective Floor Cavity Reflectance : 20 % Contrast Lighting / Multi-Aim Collection 5 Multi-Aim MR16 A halogen light distinguishes itself by its brightness and its crisp white color. A halogen light enriches a space with contrast. Colors appear brighter while materials such as chrome, glass and silver appear at their very best. Multi-Aim luminaires using MR16 lamps become the ideal choice for optimizing the appearance of objects in a museum, an art gallery or a retail outlet. MR16 lamps offer multifaceted reflectors covered with a reflective coating; so is born the “MR” prefix. The facets gather the light from a filament and create a concentrated beam to soften edges. No Light Loss The shape of the reflector using a MR16 is designed in such a way as to ensure no loss of light from the back of the luminaire. The reflector is shaped like a bell allowing the light at the back of the luminaire to be thrust forward resulting in a more powerful light output. Maintenance Maintenance can be undertaken from below the ceiling. Cables allow you to suspend the unit from the ceiling while replacing components and the junction box can be completely pulled out for on-site maintenance. Dimming All MR16 halogen lamps can be used with a low voltage (120V) electronic dimmers. Warranty The electronic converter carries a 3-year warranty while the sockets are guaranteed for a period of 5 years. 6 Contrast Lighting / Multi-Aim Collection Multi-Aim MR16 Features • Units are available with 1 to 4 lamp heads that can be adjusted by 30° on both axes, horizontal and vertical • Recessed with a double gimbal, locking at a 30° angle and compatible with 50W max. MR16 lamps. cULus certified for damp locations • Top quality Lightech electronic converter with a 95% energy output and no acoustic noise • Butterfly brackets are used with mounting bars that can be lengthened from 14-1/4" (362 mm) to 26" (660 mm) • Suitable for electrical metal tubes of 1/2" (13 mm) and to a “C” bar (neither is included) MR16 Series Dimming CRI Compatible Lamps Voltage Yes, ELV dimmer required From 95 to 100 MR16 20-50W 120 V/12 V or 277 V/12 V MR16 IR 37-50W Dimensions Product NWMA1MRE (1 lamp head) NWMA2MRE (2 lamp heads) NWMA3MRE (3 lamp heads) NWMA4MRE (4 lamp heads) (A) Length* 14-3/4" (375 mm) (B) Width* 13-13/32" (341 mm) (C) Height 6" (152 mm) 18-3/4" (476 mm) 13-13/32" (341 mm) A 6" (152 mm) 20-3/4" (527 mm) 13-13/32" (341 mm) 6" (152 mm) 26-3/4" (679 mm) 13-13/32" (341 mm) 6" (152 mm) *Overall dimensions without adjustable mounting brackets. C (D) Ceiling Opening** 7-3/8" x 6-3/8" (187 mm x 162 mm) 10-7/8" x 6-3/8" (276 mm x 162 mm) 15-1/8" x 6-3/8" (384 mm x 162 mm) 21-1/8" x 6-3/8" (537 mm x 162 mm) Trim Compatibility MAR1-MR16 MAR2-MR16 MAR3-MR16 MAR4-MR16 D ** Add 1/8” to each E side of the ceiling opening when trimless metal mesh plate is used. A C B D E Distance center-to-center 4-3/4" (121 mm) Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: Example: NWMA1MRE1W-22 B NW MA New Construction Housing Multi-Aim Series Number of Heads _ Trim Multi-Aim E MR16 Electronic Converter 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads TRIM : Example : MAR1-MR16-22-22 MAR1-MR16=1 head MAR2-MR16=2 heads MAR3-MR16=3 heads MAR4-MR16=4 heads MR Trim Color* Input Voltage Housing Color 1 = 120V 2 = 277V 11 =Matte white 22 =Matte black TRIMLESS: Example: MAR1-MR16-SF _ 11 =Matte White 15 =Metallic Grey 22 =Matte Black _ OR Housing Color 11 =Matte White 22 =Matte Black Trimless Multi-Aim MAR1-MR16-SF MAR2-MR16-SF MAR3-MR16-SF MAR4-MR16-SF =1 head =2 heads =3 heads =4 heads * Marine Grade finish available. For more information please contact factory. Consult product photo on page 4. Consult page 10 for lamp data. Contrast Lighting / Multi-Aim Collection 7 Multi-Aim PAR30 The acronym of PAR30 lamps stems from the English meaning parabolic aluminized reflector. The Multi-Aim PAR30 provides secure lighting suited to restaurants, office spaces, hotels and public areas. It emits intense white light that allows you to enhance your space. The large flood light output is ideal for general lighting and the facetted aluminum reflector provides you with uniform light throughout. No Light Loss The shape of the reflector using a MR16 is designed in such a way as to ensure no loss of light from the back of the luminaire. The reflector is shaped like a bell allowing the light at the back of the luminaire to be thrust forward resulting in a more powerful light output. Maintenance Maintenance can be undertaken from below the ceiling. Cables allow you to suspend the unit from the ceiling while replacing components and the junction box can be completely pulled out for on-site maintenance. Dimming Multi-Aim PAR30 can be used with a conventional dimmer or Triac to give you the option of varying decorative, professional or residential atmospheres. Warranty The Multi-Aim PAR30 sockets carry a 5-year warranty. 8 Contrast Lighting / Multi-Aim Collection Multi-Aim PAR30 Features • Units are available with 1 to 4 lamp heads that can be adjusted by 30° on both axes, horizontal and vertical • Double Gimbal recessed heads, locking at 30° angle, used with PAR30 sized, medium socket, universal length lamps including energy saving types • Regular 120V • cULus certified from damp to dry locations • Adjustable mounting bars with a locking mechanism of 14" to 26" (362-660 mm) • Butterfly brackets are used on electrical metal tubes of ½" (13 mm) and on a “C” bar (neither is included) PAR Series Dimming Compatible Lamps Voltage Yes, Triac dimmer and most other dimming technologies PAR30 75W max. 120 V Dimensions Product NWMA1PAR30 (1 lamp head) NWMA2PAR30 (2 lamp heads) NWMA3PAR30 (3 lamp heads) NWMA4PAR30 (4 lamp heads) (A) Length* 14-3/4" (375 mm) (B) Width* 13-7/16" (341 mm) (C) Height 6-1/16" (154 mm) 20-3/4" (527 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 26-3/4" (680 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) 32-3/4" (832 mm) 13-7/16" (341 mm) 6-1/16" (154 mm) (D) Ceiling Opening** 9-1/16" x 7-1/8" (230 mm x 181 mm) 15-1/16" x 7-1/8" (383 mm x 181 mm) 21-1/16" x 7-1/8" (535 mm x 181 mm) 27-1/16" x 7-1/8" (687 mm x 181 mm) Trim Compatibility MAR1-PAR30 MAR2-PAR30 MAR3-PAR30 MAR4-PAR30 *Overall dimensions without adjustable mounting brackets. ** Add 1/8” to each side of the ceiling opening when trimless metal mesh plate is used. A C B D E Distance center-to-center 4-3/4" (121 mm) Ordering Guide A COMPLETE UNIT CONSISTS OF A HOUSING AND A TRIM. TO INSTALL WITHOUT A TRIM, YOU MUST ORDER A MESH PLATE. HOUSING: Example: NWMA1PAR30-22 NW MA PAR30 New Construction Housing Multi-Aim Series 1 = 1 head 2 = 2 heads 3 = 3 heads 4 = 4 heads _ Trim Multi-Aim MAR1-PAR30= 1 head MAR2-PAR30= 2 heads MAR3-PAR30= 3 heads MAR4-PAR30= 4 heads PAR30 Number of Heads TRIM : Example : MAR1-PAR30-22-22 _ Housing Color 11 =Matte white 22 =Matte black TRIMLESS: Example: MAR1-PAR30-SF _ Trim Color* 11 =Matte White 15 =Metallic Grey 22 =Matte Black OR Housing Color 11 =Matte White 22 =Matte Black Trimless Multi-Aim MAR1-PAR30-SF =1 head MAR2-PAR30-SF =2 heads MAR3-PAR30-SF =3 heads MAR4-PAR30-SF =4 heads * Marine Grade finish available. For more information please contact factory. Consult product photo on page 4. Consult page 11 for lamp data. Contrast Lighting / Multi-Aim Collection 9 Photometry D Distance to fixture from wall or floor FC Maximum footcandle on wall or floor within the effective visual beam L,W Visual beam width in feet C D FC L, W C Distance to the center of the beam Distance to fixture from wall or floor Maximum footcandle on wall or floor within the effective visual beam Visual beam length or width in feet Distance to the center of the beam MR16 Beam Spread Lamps (to 50% CBCP) Direct Downlight Average 30° Aiming Angle CBCP rated life (hrs) D Fc L W D C Fc L W 20W MR16 12° (ESX) 4300 4000 6' 8' 10' 12' 119 67 43 30 1,3 1,7 2,1 2,5 1,3 1,7 2,1 2,5 2' 3' 4' 5' 3,5 5,2 6,9 8,7 134 60 34 22 1,7 2,6 3,5 4,3 0,8 1,3 1,7 2,1 20W MR16 40° (BAB) 525 4000 2' 3' 4' 5' 131 58 33 21 1,5 2,2 2,9 3,6 1,5 2,2 2,9 3,6 1' 2' 3' 4' 1,7 3,5 5,2 6,9 66 16 7 4 4,8 9,7 14,5 19,3 1,5 2,9 4,4 5,8 35W MR16 12° (FRB) 8000 5000 7' 10' 13' 16' 163 80 47 31 1,5 2,1 2,7 3,4 1,5 2,1 2,7 3,4 3' 4' 5' 6' 5,2 6,9 8,7 10,4 111 63 40 28 2,6 3,5 4,3 5,2 1,3 1,7 2,1 2,5 35W MR16 40° (FMW) 1200 5000 4' 6' 8' 10' 75 33 19 12 2,9 4,4 5,8 7,3 2,9 4,4 5,8 7,3 1' 2' 3' 4' 1,7 3,5 5,2 6,9 150 38 17 9 4,8 9,7 14,5 19,3 1,5 2,9 4,4 5,8 42W MR16 25° (EYS) 2850 5000 4' 6' 8' 10' 178 79 45 29 2,9 4,4 5,8 7,3 1,8 2,7 3,5 4,4 1' 2' 3' 4' 1,7 3,5 5,2 6,4 356 89 40 22 2,1 4,2 6,2 8,3 0,9 1,8 2,7 3,5 50W MR16 13° (EST) Beam spread 10500 5000 8' 164 1,8 12' MR16 73 IR 2,7 16' 41 3,6 20' Direct 26 Downlight 4,6 1,8 2,7 3,6 4,6 3' 4' 5' 6' 5,2 6,9 8,7 30° 10,4 146 82 53 Aiming 36 2,8 3,8 4,7 angle 5,7 1,4 1,8 2,3 2,7 (hrs) D6' Fc 425 106 83 47 47 27 30 21 219 55 72 24 32 14 18 12 94 23 125 10 31 6 14 8 275 69 174 31 Aiming 98 17 63 Fc 43 Lamps 50W MR16 20W MR16 IR (to 50% CBCP) 26° (EXZ) 10° (SP) 50W MR16 20W MR16 IR 40° (EXN) 25° (NFL) 50W MR16 20W MR16 IR 60° (FNV) 35° (FL) 75W MR16 37W Lamps MR16 IR 44° (EYC) Beam 10° spread (to 50% CBCP) (SP) CBCP Average rated life 3400 5000 6000 5000 1750 5000 2300 5000 750 5000 1000 5000 2200 5000 CBCP 12500 Average rated life 5000 (hrs) Fc L 94 2,8 8' 53 3,7 8' 94 1,4 10' 34 4,6 10' 60 1,7 12' 24 5,5 12' 42 2,1 14' 31 2,4 4' 109 2,9 6' 49 4,4 6'8' 64 2,7 27 5,8 8' 36 3,5 10' 18 7,3 10' 23 4,4 12' 16 5,3 2' 188 2,3 4' 47 4,6 4'6' 63 2,5 21 6,9 6'8' 28 3,8 12 9,2 8' 16 5,0 10' 10 4' MR16 138IR 6,3 3,2 6' 61 4,8 8'8' Direct 195 1,4 34 Downlight 6,5 10' 125 1,7 10' 22 8,1 12' 87 2,1 D Fc L 14' 64 2,4 W 2,8 D 1' 3,7 1,4 4,6 1,7 5,5 2,1 2,4 2,9 4,4 2,7 5,8 3,5 7,3 4,4 5,3 2,3 4,6 2,5 6,9 3,8 9,2 5,0 6,3 3,2 4,8 1,4 6,5 1,7 8,1 2,1 W 2,4 2' 3' 3' 4' 4' 5' 6' 1' 2' 2' 3' 3' 4' 4' 5' 1' 2' 1' 3' 2' 4' 3' 4' 1' 2' 3' 3' 4' 4' 5' D 6' C 1,7 3,5 5,2 5,2 6,9 6,9 8,7 10,4 1,7 3,5 3,5 5,2 5,2 6,9 6,9 8,7 1,7 3,5 1,7 5,2 3,5 6,9 5,2 6,9 1,7 3,5 5,2 5,2 30° 6,9 6,9 8,7 C 10,4 Long 2,2 Width 0,9 4,4 2,1 6,6 2,9 8,8 3,6 4,3 4,8 9,7 4,2 14,5 6,2 19,3 8,3 10,4 NA NA 3,6 NA 7,2 NA 10,8 14,4 6,3 12,7 2,1 19,0 angle 2,9 25,3 3,6 Long 4,3 1,8 1,0 2,8 1,4 3,7 1,7 2,1 1,5 2,9 1,8 4,4 2,7 5,8 3,5 4,4 2,3 4,6 1,3 6,9 2,5 9,2 3,8 5,0 1,6 3,2 1,0 4,8 1,4 6,5 1,7 Width 2,1 20W 37W MR16 IR IR MR16 10° 25° (SP) (NFL) 6000 4400 5000 5000 8' 6' 10' 8' 12' 10' 14' 12' 94 122 60 69 42 44 31 31 1,4 2,7 1,7 3,5 2,1 4,4 2,4 5,3 1,4 2,7 1,7 3,5 2,1 4,4 2,4 5,3 3' 2' 4' 3' 5' 4' 6' 5' 5,2 3,5 6,9 5,2 8,7 6,9 10,4 8,7 83 138 47 61 30 34 21 22 2,1 4,2 2,9 6,2 3,6 8,3 4,3 10,4 1,0 1,8 1,4 2,7 1,7 3,5 2,1 4,4 20W 37W MR16 MR16 IR IR 25° 35° (NFL) (FL) 2300 2200 5000 5000 6' 4' 8' 6' 10' 8' 12' 10' 64 138 36 61 23 34 16 22 2,7 2,5 3,5 3,8 4,4 5,0 5,3 6,3 2,7 2,5 3,5 3,8 4,4 5,0 5,3 6,3 2' 1' 3' 2' 4' 3' 5' 4' 3,5 1,7 5,2 3,5 6,9 5,2 8,7 6,9 72 275 32 69 18 31 12 17 4,2 3,6 6,2 7,2 8,3 10,8 10,4 14,4 1,8 1,3 2,7 2,5 3,5 3,8 4,4 5,0 20W 50W MR16 IR IR MR16 35° 10° (FL) (SP) 1000 15000 5000 5000 4' 8' 6' 10' 8' 12' 10' 14' 63 234 28 150 16 104 10 77 2,5 1,4 3,8 1,7 5,0 2,1 6,3 2,4 2,5 1,4 3,8 1,7 5,0 2,1 6,3 2,4 1' 3' 2' 4' 3' 5' 4' 6' 1,7 5,2 3,5 6,9 5,2 8,7 6,9 10,4 125 208 31 117 14 75 8 52 3,6 2,1 7,2 2,9 10,8 3,6 14,4 4,3 1,3 1,0 2,5 1,4 3,8 1,7 5,0 2,1 37W 50W MR16 MR16 IR IR 10° 25° (SP) (NFL) 12500 5700 5000 5000 8' 6' 10' 8' 12' 10' 14' 12' 195 158 125 89 87 57 64 40 1,4 2,7 1,7 3,5 2,1 4,4 2,4 5,3 1,4 2,7 1,7 3,5 2,1 4,4 2,4 5,3 3' 2' 4' 3' 5' 4' 6' 5' 5,2 3,5 6,9 5,2 8,7 6,9 10,4 8,7 174 178 98 79 63 45 43 29 2,1 4,2 2,9 6,2 3,6 8,3 4,3 10,4 1,0 1,8 1,4 2,7 1,7 3,5 2,1 4,4 37W 50W MR16 MR16 IR IR 25° 35° (NFL) (FL) 4400 2850 5000 5000 6' 4' 8' 6' 10' 8' 12' 10' 122 178 69 79 44 45 31 29 2,7 2,5 3,5 3,8 4,4 5,0 5,3 6,3 2,7 2,5 3,5 3,8 4,4 5,0 5,3 6,3 2' 1' 3' 2' 4' 3' 5' 4' 3,5 1,7 5,2 3,5 6,9 5,2 8,7 6,9 138 356 61 89 34 40 22 22 4,2 3,6 6,2 7,2 8,3 10,8 10,4 14,4 1,8 1,3 2,7 2,5 3,5 3,8 4,4 5,0 37W 50W MR16 IR IR MR16 35° 60° (FL) (WFL) 2200 1430 5000 5000 4' 2' 6' 4' 8' 6' 10' 8' 138 358 61 89 34 40 22 22 2,5 2,3 3,8 4,6 5,0 6,9 6,3 9,2 2,5 2,3 3,8 4,6 5,0 6,9 6,3 9,2 1' 1' 2' 2' 3' 3' 4' 4' 1,7 1,7 3,5 3,5 5,2 5,2 6,9 6,9 275 179 69 45 31 20 17 11 3,6 NA 7,2 NA 10,8 NA 14,4 NA 1,3 2,3 2,5 4,6 3,8 6,9 5,0 9,2 15000 5000 Contrast (SP)Lighting / Multi-Aim Collection 8' 10' 12' 14' 234 150 104 77 1,4 1,7 2,1 2,4 1,4 1,7 2,1 2,4 3' 4' 5' 6' 5,2 6,9 8,7 10,4 208 117 75 52 2,1 2,9 3,6 4,3 1,0 1,4 1,7 2,1 50W 10MR16 IR 10° PAR30 (Short Neck) Halogen Line Voltage Lamps Lamps Beam Spread (to 50% CBCP) CBCP Average rated life Direct Downlight 30° Aiming Angle (hrs) D Fc L W D C Fc Long Width 50W PAR30 8° (NSP) 900 2500 7' 10' 13' 16' 188 92 54 36 1,0 1,4 1,8 2,2 1,0 1,4 1,8 2,2 6' 9' 12' 15' 3,5 5,2 6,9 8,7 166 74 41 27 1,1 1,7 2,2 2,8 1,0 1,5 1,9 2,4 50W PAR30 8° (HIR) SP 17 000 3000 8' 12' 16' 20' 266 118 66 43 1,1 1,7 2,2 2,8 1,1 1,7 2,2 2,8 7' 10' 13' 16' 4,0 5,8 7,5 9,2 225 110 65 43 1,3 1,9 2,4 3,0 1,1 1,6 2,1 2,6 50W PAR30 25° (FL) 2000 3000 4' 6' 8' 10' 125 56 31 20 1,8 2,7 3,5 4,4 1,8 2,7 3,5 4,4 3' 5' 7' 9' 1,7 2,9 4,0 5,2 144 52 27 16 1,8 3,0 4,2 5,4 1,5 2,6 3,6 4,6 50W PAR30 35° (FL) 1400 3000 3' 5' 7' 9' 156 58 29 17 1,9 3,2 4,4 5,7 1,9 3,2 4,4 5,7 3' 5' 7' 9' 1,7 2,9 4,0 5,2 101 36 19 11 2,6 4,3 6,1 7,8 2,2 3,6 5,1 6,6 75W PAR30 9° (NSP) 14 000 2500 8' 12' 16' 20' 219 97 55 35 1,3 1,9 2,5 3,1 1,3 1,9 2,5 3,1 7' 10' 13' 16' 4,0 5,8 7,5 9,2 186 91 54 36 1,5 2,1 2,7 3,4 1,3 1,8 2,4 2,9 75W PAR30 NFL 30° (NFL) 3200 2500 6' 8' 10' 12' 89 50 32 22 3,2 4,3 5,4 6,4 3,2 4,3 5,4 6,4 5' 7' 9' 11' 2,9 4,0 5,2 6,4 83 42 26 17 3,7 5,1 6,6 8,1 3,1 4,3 5,6 6,8 75W PAR30 FL 40° (FL) 2000 2500 4' 6' 8' 10' 125 56 31 20 2,9 4,4 5,8 7,3 2,9 4,4 5,8 7,3 3' 5' 7' 9' 1,7 2,9 4,0 5,2 144 52 27 16 3,0 5,1 7,1 9,1 2,5 4,2 5,9 7,6 For other medium or long neck PAR lamp data, please consult the Contrast Lighting website at www.contrastlighting.com. Contrast Lighting / Multi-Aim Collection 11 12 Contrast Lighting / Multi-Aim Collection Accessories All LED (47mm) lenses are available but must be custom ordered and must be installed at the factory. Colored Lenses Linear, Prismatic and Solite Spread Lenses ColorMR16 (49mm) ColorMR16 (49mm) Red.................................................. 103079 Linear Lens The linear lens directs the lamp beam to create a strip of light 103092 Solite Lens The Solite lens softens the light in an even overall spread 103098 103095 Cobalt Blue................................................101535 Prismatic Lens The prismatic lens diffuses and spreads the light in an even overall pattern Natural Clear and Frosted Lenses Honeycomb Lenses Pink...........................................................103081 Medium Amber..........................................103083 Blue Correction..........................................103085 Mercury Vapor Green.................................103087 ColorMR16 (49mm) *Natural Clear 103104 Natural Frosted 304826 The honeycomb metallic lens reduces glare......................................103089 *This lens is factory installed. Reflector Finishes The reflector finishes below are available but must be ordered. For more information, please contact Contrast Lighting. Anodised AZ BO IG RU CB Azure Burnt Orange Inca Gold Ruby Cobalt Blue Specular Painted CL BK CH -01 -02 -11 Clear Black Champagne White Black Matte White Contrast Lighting / Multi-Aim Collection 13 Corporate Headquarters 1009, rue du Parc Industriel Saint-Jean-Chrysostome (Québec) G6Z 1C5 Canada Phone: (418) 839-4624 Toll free: 1 888 839-4624 Fax: (418) 839-7057 Toll free: 1 877 839-7057 403093 info@contrastlighting.com www.contrastlighting.com © 2014 Contrast Lighting M.L. Inc. All rights reserved. Printed in Canada. Made in Québec.