CEG ELECTRIC MOTORS N.A.
TERMS AND CONDITIONS OF SALE
PRICE:
Prices shown are F.O.B. Mississauga, Ontario, Canada or Atlanta, Georgia, U.S.A.. All taxes are extra where applicable.
Prices to be confirmed at time of ordering.
PAYMENT TERMS:
Net 30 days from the date of shipment for credit approved accounts. 2% per month finance charge will be added to
any overdue account not paid after 30 days as allowed by law. Product will remain property of CEG ELECTRIC
MOTORS N.A. until complete payment has been made by the buyer.
CLAIM:
Shortage or damaged goods in transit must be made to the transportation company as risk passes to the customer
at F.O.B. point.
WARRANTY:
CEG ELECTRIC MOTORS N.A. have a two years warranty from date of installation, against defects in manufacture
or defective material. Seller at its option will either replace or repair the defective units. Warranty does not apply to
improper storage; improper installation or use; modifications or repairs without our agreement; and anyone other
fault beyond our control. Warranty is void if motor has been dismantled by anyone other than authorized repair facility.
SELLER LIMITATION OF WARRANTY AND LIABILITIES:
Seller makes no warranties respecting the suitability of these motors for any particular purpose or use.
Buyer shall not in any event be entitled to, and seller shall not be liable for loss of profit, indirect, incidental or
consequential damages of any nature. Buyer recovery from seller for any claim shall not exceed buyer purchase
price for the product, irrespective of the claim whether in contract warranty or otherwise. No liability will be accepted
for field service, removal, replacement, inspection, freight or travel charges unless previously authorized in writing
by CEG ELECTRIC MOTORS N.A.
RESTOCKING:
Charges 25% within 30 days of receiving, in original box and condition.
CANCELLATION:
Special Custom Orders may not be cancelled after 15 days. Cancellation requested in writing prior to 15 days will
incur 35% charges.
FREIGHT:
Prepaid on orders over 1500 lb.
Index
General information • Price List • Dimensional Drawings • Connection Diagrams
PAGE (S)
Certifications
3
General Construction
4
Enclosure and Bearings
5
PAGE (S)
Cast Iron 3 phase motors
Dimensions of construction form
B3 MT cast iron
Dimensions of construction form
B5 MT cast iron
25-26
27
28
Product Specifications:
3 phase motors
3 phase high efficiency motors
Type MTEPS
8
Saw arbor motors
ETOML EMOML
(UL approved)
9
Saw arbor motors
Type ETSTD - EMSTD
31
29-30
3 phase motors
Type MTOML
10
Dimensions of construction form
saw arbor motors 48 mm
32
Two speed motors
Type DPOML
11
Dimensions of construction form
saw arbor motors 63/71 mm
33
12
Dimensions of construction form
saw arbor motors 80 mm
34
Brake motors
High-torque DC brake
MTFHC DPFHC
13
14
Nema - 3 phase motors
Nema - 3 phase motors
56/140 frame - Type NT
36
Two speed brake motors DC rectified
Type DPFHC
15
Nema - 3 phase motors
frame 180T-210T - Type NT
37
Gradual DC brake
MTFPC DPFPC
16
Nema - 3 phase DC rectified
brake motors frame 56-215
38
Compact brake motors
3 phase DC rectified Type MTFPC
17
Dimensions of construction form
Nema - foot mounted-and “C” face
TEFC 3 phase
39
Options for inverter-duty
Three-phase motors
40
Brake motors 3 phase DC rectified
Type MTFHC
Dimensions of construction form
B3 and B5 MT-DP-FPC-FHC
18
Dimensions of construction form
B14 MT-DP-FPC-FHC
19
IEC motor flanges
Reduction and increase flanges
B5 and B14 flange dimensions
alternative flanges
20
1 phase motors
21
1 phase motors
Type DMDSG-DMOML
22
Dimensions of construction form
B3 and B5 MM-DMDSG
23
Dimensions of construction form
B14 MM-DMDSG
24
35
Motor Data
41-45
Notes
46-48
Terms and conditions of sale
Certifications
USA standards (UL mark)
®
Underwriters Laboratories Inc. is an independent organization that for more than 100 years has been controlling and certifying product
safety. Today, the organization is still the major body for compliance assessment, both for the United States market and the rest of
the world. Every year over 14 billion products are granted the UL mark, which works with five test laboratories in the United States
and an international network of branches and representatives.
The procedures required to obtain the right to apply the UL mark to products is complex and highly selective.
Electric motors, considered as components of equipments or manufacturing systems, are recognized with the UR Recognized
Component mark, applied to the product identification plate. Production samples, once safety tests made on them have given positive
results, are given a UL file number that identifies the manufacturer and the product or products approved.
The file containing CEG products with UL approval is E176350. The certifying agency also makes periodic checks without prior
warning on production facilities, to guarantee constant compliance with the requirements.
NB: UL product certification is demonstrated, in addition to the mark applied on the product itself, solely by the Yellow Card issued
to the manufacturer, copies of which are available on request.
Canadian standards (CSA mark)
The Canadian Standard Association is also an independent organization that since 1919 has been committed in particular to the
development of standards and their application to production, with specific reference to the protection of persons and of domestic
and manufacturing systems in general.
The CSA also has a comprehensive network of branches and representatives, and is able to test and certify products in accordance
with its own standards, with those of the USA and with other international standard agencies.
The approval procedures for the application of the CSA mark involve rigorous duration trials, often under extreme conditions.
Electric motors are recognized with the CSA Recognized Component mark, applied to the product identification plate. Production
samples, once safety tests made on them have given positive results, are given a CSA file number that identifies the manufacturer
and the product or products approved.
The file containing CEG products with CSA approval is LR109925–1.
The certifying agency also makes periodic checks without prior warning on production facilities, to guarantee constant compliance
with the requirements.
NB: CSA product certification is demonstrated, in addition to the mark applied on the product itself, solely by the Certificate
of Compliance issued to the manufacturer, copies of which are available on request.
High efficiency
Energy Policy Act (EP Act): Public Law 102-486
This law, published in 1992 in the USA, gives guideline to be followed for the improvement of electric motor efficiency, with the same
aims as the program being implemented by the European Union (energy saving, less pollution, etc.). Since 1992 the American
Department of Energy (DOE) has developped the reference standards to be applied (classification, checking procedures, product
marking), and these came into effect in October 1997. The DOE has also accredited the follow agencies and their relatives reference
standards:
• NEMA (National Electrical Manufacturers Association) - Standard IEEE 112 - 1991
• CSA
(Canadian Standard Association) - Standard C390 - 33
Meeting already CSA Safety standard requirements, CEG has decided to enlarge its products range, working on the improvement
of electrical efficiency too. Particular attention was focused on the three phase single speed motors, with power from 1 to 200HP,
2 - 4 - 6 poles, whose mandatory efficiency levels have been achieved.
European Standards (CE mark)
The CE mark, standing for Conformite Europeenne, indicates that the product complies with all applicable EU Directives. This is
affixed by the manufacturer at the end of the manufacturing process having complied with all applicable standards. Three different
directives apply to electric motor design and production. 89/392/EEC – Machine Directive, 89/336/EEC – EMC Directive, 73/23/EEC
– Low Voltage Directive. The CE mark applied to the motor certifies CEG’s declaration of compliance with the above directives.
3
General Cons truction
Frames
All CEG frames are constructed in pressure die-cast aluminium alloy from 56 to 180L frames; from 200L to 315
in cast iron.
Feet
Frame sizes from 63 frame to 180 frame have removeable multimount feet. The motor features pre tapped holes
to relocate the feet and change the terminal box position.
Endshields
CEG motors up to 180L frame have endshields pressure-cast aluminium, from 200 to 315 made in cast iron. All
aluminium endshields from 100L frame and up have reinforced bearing journals (with steel inserts) giving them
greater mechanical strength.
Fan Covers
Made from pressed sheet metal and fitted to ensure proper airflow and cooling.
Cooling Fans
Motors are fitted with a bi-directional fan, manufactured with high thermal resistance PVC plastic in 56 to 160L
frames and in aluminium from 180M to 315 frames. Alternative fans for applications with extremely high ambient
temperatures are available.
Shafts and Rotors
Shafts are made with C45 steel, alloy steel can be used on request. The cage type rotors are made in die-cast
aluminium (AL) or aluminium alloy (GD ALSI 13-UN14514) and are dynamically balanced.
Terminal Boxes
The standard position for the terminal box is on the top of the motor (F0 position). On 63 to 180 frames, the box
position can easily be converted by relocating the feet into the pre tapped holes making a F1 or F2 position. They
are aluminium on three phase and plastic on single phase.
Paint
CEG motors are finished with ecological water-soluble paints free of chrome and lead; the standard color is BLUE
RAL 5010; other colors are available upon request.
“THE METRIC MOTOR SPECIALISTS”
4
Enclos ur e and Bearing s
Bearings
CEG motors are fitted with rigid radial bearings with one ring of “CM” or “C3” ball bearings with IP44 protection (ZZ), or radial
bearings with a ring of “C3” cylindrical roller bearings, depending on dimensions and/or requests (see chart below). These bearings
are supplied by leading manufacturers, and are specifically designed for use on electric motors. The bearings are pre-lubricated
for lifetime operation by the manufacturers with lithium grease (resistant from -40 to +130°C), and are axially pre-loaded with
compensation rings in tempered steel. From M225 to M315 they are lubricated with a grease nipple located at the top of the motor
at each end (D and N). These motor sizes should be lubricated at intervals that depend on speed (RPM) and running hours.
Chart: Bearings fitted on CEG motors
Motor size
M56
M63
M71
M80
M90S-L
M100L
M112M
M132S-M
M160M-L
M180M-L
M200La
Drive end bearing
-D-
Non drive end bearing
-N-
6201 CM ZZ
6202 CM ZZ
6203 CM ZZ
6204 CM ZZ
6205 CM ZZ
6206 C3 ZZ
6306 C3 ZZ
6208 C3 ZZ
6309 C3 ZZ
6310 C3 ZZ
6312 C3 ZZ
6201 CM ZZ
6202 CM ZZ
6203 CM ZZ
6204 CM ZZ
6205 CM ZZ
6206 C3 ZZ
6306 C3 ZZ
6208 C3 ZZ
6309 C3 ZZ
6310 C3 ZZ
6312 C3 ZZ
Motor size
M200Lb
M225SM
M250M
M280SM
M315SM
M315L
Nema 56
Nema 56H
Nema 143/145
Nema 182/184
Nema 213/115
Drive end bearing
-D-
Non drive end bearing
6313 C3
6313 C3 - (313W C3)*
6314 C3 - (314W C3)*
6317 C3 - (317W C3)*
6317 C3 - (317W C3)*
6319 C3 - (319W C3)*
6204 CM ZZ
6205 CM ZZ
6205 CM ZZ
6306 C3 ZZ
6208 C3 ZZ
* Optional for drive end
-N-
6313 C3
6213 C3
6214 C3
6317 C3
6317 C3
6319 C3
6204 CM ZZ
6205 CM ZZ
6205 CM ZZ
6306 C3 ZZ
6208 C3 ZZ
External or mechanical protection rating
The level of protection against accidental contacts and the entry of solid bodies and water is expressed by an
international system of symbols composed of two letters and two numbers:
IP = reference letters for type of protection
1 st number = level of protection against solid bodies
2 nd number = level of protection against water
Chart: Protection ratings of electrical machines (IEC 34 - 5)
1st
number
Protection against solid
2nd
number
0
Machine not protected
0
1
Protected against solid bodies with dimensions
over 50 mm
1
2
Protected against solid bodies with dimensions
over 12 mm
2
3
Protected against solid bodies with dimensions
over 2.5 mm
3
Protection against rain
4
Protected against solid bodies with dimensions
over 1 mm
4
Protection against water sprays
5
Protection against dust
5
Protection against water jets
6
Protection against water waves
7
Protection against effects of immersion
8
Protection against effects of submersion
Protection against water
Machine not protected
Protection against vertical fall of water drops
Protection against water drops with
maximum angle of 15°
Standard CEG motor protection is IP 55: By request protection rating IP 56 can be supplied (with surcharge).
5
3 Phase motors
PRODUCTION STANDARDS
Mounting-construction form
Terminal box position
Power supply
Protection rating
Bearings
Winding insulation
Connection cover
Motor clamping
Removable Feet
Multimount
230/460 V
60 Hz
575 V
60 Hz
IP55
ZZ
Class F
2 Aluminium components
Bosses and bolts
Paint finish
Fan cover
Service factor
BLUE RAL 5010
Galvanized sheet steel
1.15 (unless otherwise stated)
Three phase motors D-Y
575 V
460
333
230VV
W2
U2
V2
U1
V1
W1
L1
L2
L3
L1
L2
L3
Three phase motors with 6 terminals 9 wires
230 V
V2
U2
W2
U5
V1
W1
L2
L1
U1
W1
W1
V1
L3
L2
L1
V5
V2
V1
U1
L3
U5 V2
U2
W2
V5 W1 W5
WEIGHT
W5 U2
W2
V2
V1
U1
U1
460 V
U2
W2
Three phase motors with 6 terminals 9 wires
460 V
230 V
W2
Connection
used on 5.5 HP
and larger
W2
U2
V2
U5 W2
V5 U2
V2 W5
V1
U1
U1
V1
L1
L2
W2
U1
W1
W1
L3
U2
U1
L1
V2
W1
V1
V1
W1
L2
L3
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
8
56
63
71
80
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
V5
U5 V2
W5 U2
FRAME
KGS
3.5
5
8
12
13
18
24
35
43
59
86
110
160
160
LBS
7.8
11
17.5
26.5
29
39.7
53
77
95
130
190
242.5
353
353
Brake m o t o r s
CEG can supply motors with three different types of brake, to be
chosen according to the application:
1. FPC type: gradual electromagnetic brake powered by direct
current, with a single braking surface (special order factory
delivery)
2. FHC type: electromagnetic brake with high torque powered
by direct current, with a double braking surface (stock in North
America)
3. FHA type: electromagnetic brake with high torque powered
by alternating current, with a double braking surface special order
factory delivery
Three phase Brake motor with 6 studs and 9 wires
460 V
230 V
W2
W2
BRAKE
W5 U2
U5 V2
W2
V2
U2
V5
V2
U2
205 V DC
BRAKE
205 V DC
W2
U2
U1
U5 V1
V5 W1
W5 U1
L3
L2
L1
U1
W1
V1
U1
BRIDGE
RECTIFIER
V2
W1
V1
V1
L1
W1
L2
L3
BRIDGE
RECTIFIER
Three phase Brake motor with 6 studs and 9 wires
230 V
W2
W2
BRAKE
U2
460 V
V2
W2
W2
V2
U2
W5 U2
U5 V2
V5
V2
U2
BRAKE
205 V DC
205 V DC
U1
U1
BRIDGE
RECTIFIER
U5 V1
L1
V5 W1
L2
U1
W1
V1
W5 U1
L3
V1
L1
W1
V1
W1
L2
L3
BRIDGE
RECTIFIER
Three phase Brake
575 V
330 V
W2
U2
V2
BRAKE
W2
U2
V2
U1
V1
W1
L1
L2
L3
HALF WAVE
RECTIFIER
BRAKE
150 V DC
150 V DC
U1
V1
W1
L1
L2
L3
HALF WAVE
RECTIFIER
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
12
WEIGHT
FRAME
KGS
56
63
71
80
90S
90L
100L
112M
132S
132M
160M
160L
4.3
6.5
10.3
19.5
21
24.5
33
43
63.5
79
113
134
LBS
9.5
11
22.7
43
46.3
54
73
95
140
174
250
296
High-tor q ue DC brake
(MTFHC, DPFHC )
PRODUCTION STANDARDS
Mounting – construction form
Terminal box position
Power supply
Brake coil DC with rectifier
Protection rating
Bearings
Winding insulation
Connection cover
Motor clamping
Paint finish
Fan cover
Service factor
This version has a double dry braking surface. Braking
torque is provided by the thrust of an adjustable
spring, with electromagnetic release controlled by
magnets powered with direct current. The main
characteristics of this model are as follows:
• silent operation;
• braking without axial shifting;
• negligible additional moment of inertia;
• possibility of fitting a hand release lever,
on request (*).
This brake requires no maintenance apart from the
periodic adjustment of braking gap made necessary
by wear on the friction pad. This adjustment is made
by turning the cylindrical screws located on the rear
of the unit until the braking gap returns to the values
indicated (see chart).
N.B. Other design features must be specified (brake
voltage, connection through terminal board or
separate).
Size
M63
M71
M80
M90
M100
M112
M132
M160
M180
Brake
Size
size
M63
06
M71
06
M80
08
M90
10
M100
12
M112
12
M132
14
M160
18
M180
20
Removable feet
Multimount
MT 230/460V or 575V
60 Hz
230/460V suitable for
380V 50Hz with separate supply to rectifier
DP 460V or 575V or 230 V
60 Hz
205V DC (230/460V)
150V DC (330/575V)
IP54
2 RS
Class F
terminal box with lid (2 aluminium components FH type)
bosses and bolts
BLUE RAL 5010
galvanized sheet steel
1.15 (*unless otherwise stated)
Electromagnet
Motor shaft
Mobile anchor
FHC endframe
Brake
Braking Braking
Braking
Power
torque Closing
size Braking
torque
Power
time
torque
torque
(W)
(ft. lbs)
(NM)
(W)
(ft. lbs)
(ms)
(NM)
06
4
3
20
4 06
34
20 3
1720
4 08
38
20 6
1725
8 10
616
2512
3530
1612
1232
3024
4040
3212
2432
4024
5040
3214
2460
4044
5050
6018
44150
50111
9060
15020
111
60191
11075
260
260
191
75
200
Manual release
lever *
PVC fan
Braking gap
adjustment screw
Drive hub
Spring
washer
Braking ring
with friction pad
Key
Closing
Release
time
time
(ms)
(ms)
17
3517
3535
6540
9050
120
50
120
90
180
110
300
200
400
Braking gap
Release
Braking
time
gap
(ms)
(mm)
35
0.2
35
0.2
65
0.2
90
0.2
120
0.3
120
0.3
180
0.3
300
0.3
400
0.3
Braking
gap
(mm) Weight
0.2
6
0.2
6
0.2
8
0.2
13
0.3
15-20
0.3
15-20
0.3
36
0.3
50-68
0.3
13
13
18
28
33-43
33-43
78
109-150
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
13
Two speed brake m o t o r s
DC r ectified
TYPE DPFHC
•
•
•
•
•
•
•
*CSA APPROVED*
*UL APPROVED*
*ISO 9001 APPROVED*
2/4 POLES - 3600/1800 RPM
Service Factor 1.15
230V or 460 V or 575V
3Ph - 60Hz - TEFC - IP54
Class F Insulation
Fitted with Lenze DC Rectified Brake
Removable feet - Multi-mount design
Hand Release Levers
(available as optional extra)
Service Factor 1.0
4/6 POLES - 1800/1200 RPM
ONE WINDING - CONSTANT TORQUE
TYPE
DPFHC63A2/4
DPFHC71A2/4
DPFHC71B2/4
DPFHC80A2/4
DPFHC80B2/4
DPFHC80C2/4
DPFHC90SA2/4
DPFHC90LA2/4
DPFHC100LA2/4
DPFHC100LB2/4
DPFHC112MA2/4
DPFHC132SA2/4
DPFHC132MA2/4
DPFHC160MA2/4
DPFHC160LA2/4
HP
.3/.2
.4/.3
.75/.5
.8/.6
1.1/.8
1.5/1
2/1.5
3/2
4/3
5.5/4
6/4.5
7.5/6
11/9
15/12
19/15
KW
.22/.15
.3/.22
.55/.37
.6/.45
.8/.6
1.1/.75
1.5/1.1
2.2/1.5
3/2.2
4/3
4.5/3.3
5.5/4.5
8.1/6.6
11/9
14/11
LIST
930
1100
1190
1175
1255
1300
1450
1580
1795
1895
2200
3650
4950
6990
7990
4/8 POLES - 1800/900 RPM
ONE WINDING - CONSTANT TORQUE
TYPE
HP
KW
LIST
DPFHC71B4/8
DPFHC80A4/8
DPFHC80B4/8
DPFHC90SA4/8
DPFHC90LA4/8
DPFHC100LA4/8
DPFHC112MA4/8
DPFHC132SA4/8
DPFHC132MA4/8
DPFHC160MA4/8
DPFHC160MB4/8
DPFHC160LA4/8
.25/.12
.5/.28
.75/.4
1/.5
1.35/.7
1.9/.9
3/1.9
5/2.8
7/4
8/5.5
10/6.8
14/9
.185/.09
.37/.2
.55/.3
.75/.37
.1/.5
1.4/.66
2.2/1.4
3.7/2
5.1/3
6/4
7.5/5
10/7
1120
1290
1390
1520
1690
1890
2460
3650
4990
6990
7550
7990
ALSO AVAILABLE;
SPECIAL VOLTAGE AND FREQUENCY
LARGER RATINGS
TWO WINDINGS
TYPE
HP
DPFHC71A4/6
DPFHC80A4/6
DPFHC90SA4/6
DPFHC90LA4/6
DPFHC100LA4/6
DPFHC112MB4/6
DPFHC132MA4/6
DPFHC132MB4/6
.4/.3
.75/.5
1/.75
1.5/1
2/1.2
3/2
5.5/3.5
7.5/5.5
KW
LIST
.30/.22
.55/.37
.75/.55
1.1/.75
1.5/.9
2.2/1.5
4/2.5
5.5/4
1300
1450
1720
1890
2050
2780
4100
4960
6/8 POLES - 1200/900 RPM
TWO WINDINGS
TYPE
HP
KW
LIST
DPFHC80A6/8
DPFHC90LA6/8
DPFHC100LA6/8
DPFHC112MA6/8
DPFHC132SA6/8
DPFHC132MA6/8
.35/.19
.75/.35
1.3/.75
2/1.
3/1.5
4/2.5
.25/.14
.55/.25
.95/.55
1.5/.75
2.2/1.1
3/1.85
1360
1490
1990
3290
3990
4250
2/8 POLES - 3600/900 RPM
TWO WINDINGS
TYPE
DPFHC80A2/8
DPFHC80B2/8
DPFHC90SA2/8
DPFHC90LA2/8
DPFHC100LA2/8
DPFHC112MA2/8
DPFHC132MA2/8
HP
KW
.5/.12 .37/.09
.75/.2 .55/.15
1/.25 .75/.185
1.5/.35 1.1/.25
2.2/.6 1.6/.45
3.7/1 2.7/.75
4/1.5
5.5/2
LIST
1750
1850
1950
2050
2200
2990
3950
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
15
Gradual DC brake
(MTFPC, DPFPC)
PRODUCTION STANDARDS
Mounting – construction form
Terminal box position
Power supply
Removable feet
Multimount
MT 230/400V
or 575V
380V
50 Hz
DP 460V
or 575V
or 230V
60 Hz
230V
(400V for Pn > 3kW)
“AS” type
IP54
2 RS
Class F
terminal box with lid (2 aluminium components)
bosses and bolts
BLUE RAL 5010
galvanized sheet steel
S1
Brake power supply (supplied disconnected)
Voltage rectifier
Protection rating
Bearings
Winding insulation
Connection cover
Motor clamping
Paint finish
Fan cover
Service factor
The main characteristic of this type of brake is its soft
and gradual braking, which makes it particularly
suitable for application on machines with very high
inertial masses, where abrupt stops could subject
the structure to dangerous stresses. The FPC brake
has a lower braking torque and longer stopping times
than the other brake types (proportional to the mass
inertia of the load). This is achieved with a single
braking surface and the higher mass inertia given by
the cast iron fan, which is an integral part of the brake.
The brake is powered by direct current.
The braking gap is regulated with the adjustment
screws located at the non-drive end of the motor
shaft, with no need for the fan cover to be removed
(see exploded diagram over and diagram inside every
motor of this type).
N.B. Other design features must be specified (brake
voltage, connection through terminal board or
separate).
The standard voltage rectifier or power supply unit
may be modified for special requirements (rapid
opening and/or closing, anti-interference filter).
Size
M63
M71
M80
M90
M100
M112
M132
M160
Electromagnet
FPC endframe
Mobil anchor
Key
Self-locking nut
Spring
Adjustment
screw
Washer
Braking gap
Cast iron fan
Motor
Friction pad
shaft
Braking
torque
(Nm)
Braking
torque
(ft.lbs)
Power
(W)
2.5
4
9
9.5
12
12.5
23
23
3.3
5.3
12
12.7
16
16.6
30.6
30.6
15
15
20
20
30
30
30
60
Closing
time
(ms)
20
15
15
15
10
10
10
13
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
16
Release
time
(ms)
40
100
120
120
200
200
200
215
Braking gap
(mm)
0.2
0.2
0.2
0.25
0.25
0.25
0.3
0.3
Compact Brake motor s
3 Phase DC r e ctified
TYPE MTFPC
•
•
•
•
•
•
*CSA APPROVED*
*UL APPROVED*
*ISO 9001 REGISTERED*
*IEC*
2 POLES - 3600 RPM
Frame length same as standard 3 phase
230/460V or 575V
3Ph - 60Hz - TEFC - IP55
Class F Insulation
Removable Feet - Multi-mount design
Service Factor 1.15 suitable for use at
380V 50Hz 1.0 Service Factor
4 POLES - 1800 RPM
TYPE
HP
KW
LIST
TYPE
HP
KW
LIST
MTFPC63A2
MTFPC63B2
MTFPC71A2
MTFPC71B2
MTFPC80A2
MTFPC80B2
MTFPC90SA2
MTFPC90LA2
MTFPC100LA2
MTFPC100LB2
MTFPC112MA2
MTFPC112MB2
MTFPC132SA2
MTFPC132SB2
0.25
0.35
0.5
0.75
1
1.5
2
3
4
5.5
5.5
7.5
7.5
10
0.185
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
4
5.5
5.5
7.5
630
660
700
725
820
860
990
1150
1290
1390
1690
1780
1990
2100
MTFPC63A4
MTFPC63B4
MTFPC71A4
MTFPC71B4
MTFPC71C4
MTFPC80A4
MTFPC80B4
MTFPC90SA4
MTFPC90LA4
MTFPC90LB4
MTFPC100LA4
MTFPC100LB4
MTFPC112MA4
MTFPC132SA4
MTFPC132MA4
0.18
0.25
0.35
0.5
0.75
0.75
1
1.5
2
2.5
3
4
5.5
7.5
10
0.135
0.185
0.25
0.37
0.55
0.55
0.75
1.1
1.5
1.85
2.2
3
4
5.5
7.5
630
660
700
725
820
860
990
1100
1150
1290
1390
1690
1780
1990
2100
6 POLES - 1200 RPM
8 POLES - 900 RPM
TYPE
HP
KW
LIST
TYPE
HP
MTFPC63A6
MTFPC71A6
MTFPC71B6
MTFPC80A6
MTFPC80B6
MTFPC90SA6
MTFPC90LA6
MTFPC100LA6
MTFPC112MA6
MTFPC132SA6
MTFPC132MA6
MTFPC132MB6
0.17
0.25
0.35
0.5
0.75
1
1.5
2
3
4
5.5
7.5
0.12
0.185
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
700
740
780
830
920
1150
1290
1490
1720
2150
2290
2500
MTFPC80A8
MTFPC80B8
MTFPC90SA8
MTFPC90LA8
MTFPC100LA8
MTFPC100LB8
MTFPC112MA8
MTFPC132SA8
MTFPC132MA8
0.25
0.35
0.5
0.75
1
1.5
2
3
4
KW
0.17
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
LIST
830
920
990
1150
1290
1490
1720
2290
2560
AVAILABLE BY FACTORY ORDER
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
17
Dimensions of cons truction form
B3 and B5 MT-DP -FPC-FHC
L2
L1
L2
L1
AF
L
AD
AL
H
D
AC
HD
B3 MT-DP-FPC-FHC
(B6 - B7 - B8 - V5 - V6)
K
Size
M56
M63
M71
M80
M90S
M90L
M100
M112
M132S
M132M
M160M
M160L
M180M
M180L
A
90
100
112
125
140
140
160
190
216
216
253
253
279
279
AB
109
120
136
160
175
175
200
225
260
260
318
318
345
345
B
71
80
90
100
100
125
140
140
140
178
209
253
241
279
BB
91
106
108
125
131
156
170
177
181
220
260
304
291
330
C
36
40
45
50
56
56
63
70
89
89
109
109
121
121
D
9
11
14
19
24
24
28
28
38
38
42
42
48
48
E
20
23
30
40
50
50
60
60
80
80
110
110
110
110
H
56
63
71
80
90
90
100
112
132
132
160
160
180
180
A
AB
GA
HD
168
180
196
213
227
227
247
272
334
334
392
392
440
440
L
187
214
245
279
305
330
370
385
460
500
610
645
710
710
L1
249
248
279
305
330
370
385
460
500
770
805
870
870
L2
209
249
286
332
357
382
442
447
534
574
770
805
870
870
K
6
7
8
10
10
10
11
11
11
11
14
14
13
13
AC
115
123
147
165
181
181
198
222
264
264
317
317
352
352
AD
112
117
125
133
137
137
147
160
202
202
232
232
260
260
L2
L1
L
AF AL
93 13
93 19
93 24
111 23
111 28
111 28
111 42
111 43
133 47
133 47
186 52.5
186 52.5
185 54
185 54
DB
B
BB
C
F
E
L1 = Dimension with compact brake
L2 = Dimension with brake
F
3
4
5
6
8
8
8
8
10
10
12
12
14
14
GA
10
13
16
22
27
27
31
31
41
41
45
45
51.5
51.5
DB
M3
M4
M5
M6
M8
M8
M10
M10
M12
M12
M16
M16
M16
M16
AF
AL
E
AD
S
AC
N
4 5°
D
P
B5 MT-DP-FPC-FHC
M
(V1 - V3)
T
Size
M56
M63
M71
M80
M90S
M90L
M100L
M112M
M132S
M132M
M160M
M160L
M180M
M180L
P
120
140
160
200
200
200
250
250
300
300
350
350
350
350
N
80
95
110
130
130
130
180
180
230
230
250
250
250
250
M
100
115
130
165
165
165
215
215
265
265
300
300
300
300
F
GA
T
2.5
2.5
3
3
3
3
4
4
4
4
5
5
5
5
S
D
E
7
9
20
9.5
11
23
9
14
30
12
19
40
12
24
50
12
24
50
14.5
28
60
14
28
60
14
38
80
14
38
80
18
42 110
18
42 110
18.5
48 110
18.5
110
“ THE48METRIC
F
GA
L
L1 L2 LA
3
10.2 187
209
8
4
12.5 214 249 249 10
5
16
242 248 286
9
6
21.5 279 279 332 10.5
8
27
305 305 357 10.5
8
27
330 330 382 10.5
8
31
370 370 442 14
8
31
385 385 447 14
10
41
460 460 534 20
10
41
500 500 574 20
12
45
610 770 770 15
12
45
645 805 805 15
14
51.5 710 870 870 20
14
51.5SPECIALISTS”
710 870 870 20
MOTOR
Please note: prices are subject to change without notice
18
DB
LA
L1 = Dimension with compact brake
L2 = Dimension with brake
AD
112
117
125
138
148
148
156
159
193
193
232
235
260
260
AF
93
93
93
111
111
111
111
111
133
133
186
186
185
185
AL
13
19
24
23
28
28
42
43
47
47
52.5
52.5
54
54
AC
115
123
147
165
181
181
198
222
264
264
317
317
352
352
DB
M3
M4
M5
M6
M8
M8
M10
M10
M12
M12
M16
M16
M16
M16
Dimensions of construction form
B14 MT-DP -FPC-FHC
L2
L2
L1
AF
L
AL
AD
E
M
AC
N
P
B14 MT-DP-FPC-FHC
F
(V18 - V19)
45°
D
GA
T
S
Size
M56
M63
M71
M80
M90S
M90L
M100
M112
M132S
M132M
M160M
M160L
P
80
90
105
120
140
140
160
160
200
200
250
250
N
50
60
70
80
95
95
110
110
130
130
180
180
M
65
75
85
100
115
115
130
130
165
165
215
215
DB
L1 = Dimension with compact brake
L2 = Dimension with brake
T
2.5
2.5
3
3
3
3
3.5
3.5
4
4
5
5
S
M5
M5
M6
M6
M8
M8
M8
M8
M10
M10
M12
M12
D
9
11
14
19
24
24
28
28
38
38
42
42
E
20
23
30
40
50
50
60
60
80
80
110
110
F
3
4
5
6
8
8
8
8
10
10
12
12
GA
10.2
12.5
16
21.5
27
27
31
31
41
41
45
45
L
187
214
242
279
305
330
370
385
460
500
610
645
L1
249
248
279
305
330
370
385
460
500
770
805
L2
209
249
286
332
357
382
442
447
534
574
770
805
AD
112
117
125
133
148
148
156
159
193
193
235
235
AF
93
93
93
111
111
111
111
111
133
133
186
186
AL
13
19
24
23
28
28
42
43
47
47
79
79
AC
115
123
147
165
181
181
198
222
264
264
317
317
DB
M3
M4
M5
M6
M8
M8
M10
M10
M12
M12
M16
M16
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
19
B5 and B14 flange
dimensions
Shaft Modification
* Indicates
will be necessary in order to
install flange: At additional cost
diameter to be specified
* atShaft
time of order
“C” Flange B14
Frame
Size
Flange Mount
M
N
P
List
Frame
Size
Flange Mount
M
N
P
List
56
63
71
80
90
90L
100L
112M
132S
132M
160M
160L
180M
180L
200L/2
200L
225S
225M/2
225M
250S/2
250S
100
115
130
165
165
165
215
215
265
265
300
300
300
300
350
350
400
400
400
500
500
120
140
160
200
200
200
250
250
300
300
350
350
350
350
400
400
450
450
450
550
550
40
40
45
50
60
60
80
90
130
130
240
240
325
325
500
500
695
695
695
850
850
56
63
71
80
90S
90L
100L
112M
132S
132M
160M
160L
65
75
85
100
115
115
130
130
165
165
215
215
50
60
70
80
95
95
110
110
130
130
180
180
40
40
45
50
60
60
80
90
130
130
240
240
M
N
P
80
90
105
120
140
140
160
160
200
200
250
250
“D” Flange B5
M
80
95
110
130
130
130
180
180
230
230
250
250
250
250
300
300
350
350
350
450
450
“C” Flange B14
N
P
“D” Flange B5
ALTERNATIVE FLANGES
“C” Flange B14
“D” Flange B5
Frame
Increase
Reduction
List
Frame
Increase
Reduction
List
63
71
80
90
100
112
132
160
*
56
63
63/71
71
71/80/90
71/80/90
110/112
132
64
64
72
88
144
144
208
650
63
71
80
90
100
112
71/80
80/90
90/100
100/112
132
132
56
63
71
80
90
64
64
72
88
128
128
*
*
*
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
20
1 Phase motors
PRODUCTION STANDARDS
Mounting-construction form
Terminal box position
(multi-mount)
Power supply
Run Capacitor
Removable feet
Multimount
Protection rating
Bearings
Winding insulation
Connection cover
Motor clamping
230V
60 Hz 115V 60 Hz
external, permanently
connected
IP55
ZZ
Class F
terminal box with lid
bosses and bolts
Paint finish
Fan cover
Service factor
BLUE RAL 5010
galvanized sheet steel
1.0
High Torque
Connection 230 V
Cs
cs
Connection 115 V
Cs
C.sw
sw
sw
cs
cs
MUSA05
C.sw
sw
sw
cs
C
C
cr
cr
cr
R2
T5
St.w.
R1
cr
T3
R1
T8
T1
R2
T5
St.w.
T4
T3
T4
T8
T1
T2
L2
L1
T2
L2
L1
To reverse rotation interchange T5 with T8
WEIGHT
Standard Torque
Connection 230 V
Connection 115 V
C
cr
cr
FRAME
St.w.
R1
R2
T3
St.w.
T4
R1
T8
L1
R2
T5
T3
T4
T8
T1
T2
L2
KGS
LBS
cr
cr
T5
T1
MUSA06
C
T2
L1
56
63
71
80
90S
90L
100L
3.6
5.5
8.4
13
15
19.5
24.5
8
12
18.5
29
33
43
54
L2
To reverse rotation interchange T5 with T8
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
21
Dimensions of cons truction form
B3 and B5 MM-DMDSG
L1
L
AF
AP
D
B3 MMOML=L
MMDSG=LI
H
AC
HD
AD
AL
K
B
BB
C
(B6 - B7 - B8 - V5 - V6)
A
AB
F
E
Size
M63
M71
M80
M90S
M90L
M100L
A
100
112
125
140
140
160
AB
120
136
160
175
175
200
B
80
90
100
100
125
140
BB
106
108
125
131
156
170
C
40
45
50
56
56
63
D
11
14
19
24
24
28
E
23
30
40
50
50
60
H
63
71
80
90
90
100
HD
187
203
235
249
249
269
L
214
245
279
305
330
370
L1
240
280
290
322
347
393
K
7
8
9.5
9.5
9.5
11
AC
123
147
165
181
181
198
DB
GA
L1 = Dimension with cap start/cap run
AD
124
132
155
159
159
169
AF
92
92
119
119
119
119
AP
121
121
146
146
146
146
AL
19
24
17
22
22
36
F
4
5
6
8
8
8
GA
13
16
22
27
27
31
DB
M4
M5
M6
M8
M8
M10
L1
L
AF
AP
AC
45 °
D
N
P
AD
AL
E
M
B5 MMOML=L
MMDSG=LI
LA
S
F
T
(V1 - V3)
Size
M63
M71
M80
M90S
M90L
M100
P
140
160
200
200
200
250
N
95
110
130
130
130
180
M
115
130
165
165
165
215
T
3
3
3.5
3.5
3.5
4
S
9.5
9.5
11.5
11.5
11.5
14
D
11
14
19
24
24
28
E
23
30
40
50
50
60
F
4
5
6
8
8
8
GA
12.5
16
21.5
27
27
31
L
214
242
279
305
330
370
L1
240
280
290
322
347
393
LA
10
9
10.5
10.5
10.5
14
DB
GA
L1 = Dimension with cap start/cap run
AD
124
132
155
159
159
169
AF
92
92
119
119
119
119
AP
121
121
146
146
146
146
AL
19
24
17
22
22
36
AC DB
123 M4
147 M5
165 M6
181 M8
181 M8
198 M10
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
23
Dimensions of cons truction form
B14 MM-DMDSG
L1
L
AF
AP
AL
M
45 °
D
P
N
B14 MM-DMDSG
AC
AD
E
S
F
T
L1 = Dimension with cap start/cap run
Size
M63
M71
M80
M90S
M90L
M100
P
90
105
120
140
140
160
N
60
70
80
95
95
110
M
75
85
100
115
115
130
T
3
3
3.5
3.5
3.5
4
GA
S
M5
M6
M6
M8
M8
M8
D
11
14
19
24
24
28
E
23
30
40
50
50
60
F
4
5
6
8
8
8
FB
15
20
30
40
40
50
GA
12.5
16
21.5
27
27
31
GD
4
5
6
7
7
7
L
214
242
279
305
330
370
L1
240
280
290
322
347
393
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
24
DB
(V18 - V19)
AD
124
132
155
159
159
169
AF
92
92
119
119
119
119
AP
121
121
146
146
146
146
AL
19
24
17
22
22
36
AC DB
123 M4
147 M5
165 M6
181 M8
181 M8
198 M10
Cast iron
3 Phase motors
PRODUCTION STANDARDS
Mounting-construction form
Terminal box position
Power supply
Protection rating
Bearings
Winding insulation
Connection cover
Motor clamping
IMB3
Top terminal box (BS)
460/790V-60 Hz
400/690V-50 Hz
IP55
ZZ
Class F
2 Aluminium components
Bosses and bolts
Paint finish
Service factor (60Hz)
BLUE RAL 5010
1.15 (unless otherwise stated)
WEIGHT
FRAME
Three phase motors D-Y
460 V
790 V
U2
V2
W2
U2
V2
W2
U1
V1
W1
U1
V1
W1
L1
L2
L3
L1
L2
L3
160M
160L
180M
180L
200L
225S
225M
250M
280S
280M
315S
315M
315L
KGS
91
133
142
152
255
260
285
350
490
525
742
885
1150
LBS
201
293
313
335
562
573
629
772
1080
1157
1635
1951
2535
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
25
Cast iron
3 Phase motors
TYPE MTRED
•
•
•
•
2 POLE - 3600 RPM
TYPE
HP
MTRED160MA2
MTRED160MB2
MTRED160LA2
MTRED180M2
MTRED200LA2
MTRED200LB2
MTRED225M2
MTRED250M2
MTRED280S2
MTRED280M2
MTRED315S2
MTRED315M2
MTRED315LA2
MTRED315LB2
15
20
25
30
40
50
60
75
100
120
150
180
215
270
KW
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
6 POLE - 1200 RPM
4 POLE - 1800 RPM
TYPE
MTRED160M4
MTRED160L4
MTRED180M4
MTRED180L4
MTRED200L4
MTRED225S4
MTRED225M4
MTRED250M4
MTRED280S4
MTRED280M4
MTRED315S4
MTRED315M4
MTRED315LA4
MTRED315LB4
MTRED160M6
MTRED160L6
MTRED180L6
MTRED200LA6
MTRED200LB6
MTRED225M6
MTRED250M6
MTRED280S6
MTRED280M6
MTRED315S6
MTRED315M6
MTRED315LA6
MTRED315LB6
HP
KW
10
15
20
25
30
40
50
60
75
100
120
150
180
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
MTRED160MA8
MTRED160MB8
MTRED160L8
MTRED180L8
MTRED200L8
MTRED225S8
MTRED225M8
MTRED250M8
MTRED280S8
MTRED280M8
MTRED315S8
MTRED315M8
MTRED315LA8
MTRED315LB8
FACTORY ORDER
CALL FOR PRICING
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
26
HP
KW
15
20
25
30
40
50
60
75
100
120
150
180
215
270
11
15
18.5
22
30
35
45
55
75
90
110
132
160
200
8 POLE - 900 RPM
TYPE
TYPE
IP55
Class F
CE Marked Only
Efficiency ‘2’
HP
5.5
7.5
10
15
20
25
30
40
50
60
75
100
120
150
KW
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
Dimensions of cons truction form
B3 MT cas t ir on
B3 MT
GA
K
E
A
B
C
DB
H
F
D
AC
HD
AD
L
AB
BB
(B6 - B7 - B8 - V5 - V6)
Size
M160 M 2-4-6-8P
M160 L 2-4-6-8P
M180 M 2-4P
M180 L 4-6-8P
M200 L 4-8P
M200 LA 2-6P
M200 LB 2-6P
M225 S 2P
M225 S 4-8P
M225 M 2P
M225 M 4-6-8P
M250 M 2P
M250 M 4-6-8P
M280 S 2P
M280 S 4-6-8P
M280 M 2P
M280 M 4-6-8P
M315 S 2P
M315 S 4-6-8P
M315 M 2P
M315 M 4-6-8P
M315 LA 2P
M315 LB 2P
M315 L 4P
M315 L 6-8P
A
AB
B
BB
C
D
E
H
HD
AD
L
K
AC
AD
F
GA
GD
DB
254
254
279
279
318
318
318
356
356
356
356
406
406
457
457
457
457
508
508
508
508
508
508
508
508
292
304
320
320
368
368
395
429
425
425
425
480
480
560
560
560
560
608
608
608
608
608
608
608
608
210
254
241
279
305
305
305
286
286
311
311
349
349
368
368
419
419
406
457
457
457
508
508
508
508
246
300
328
328
360
360
375
383
380
380
380
425
425
510
510
510
510
570
570
570
570
620
620
620
620
108
108
121
121
133
121
133
149
149
149
149
168
168
190
190
190
190
216
216
216
216
216
216
216
216
42
42
48
48
55
55
55
55
60
55
60
60
65
65
75
65
75
65
80
65
80
65
65
80
80
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
140
140
170
140
170
140
140
170
170
160
160
180
180
200
200
200
225
225
225
225
250
250
280
280
280
280
315
315
315
315
315
315
315
315
347
402
422
422
460
460
490
515
515
515
515
560
560
660
660
660
660
695
695
695
695
815
815
815
815
187
242
242
242
260
260
290
290
290
290
290
310
310
380
380
380
380
380
380
380
380
500
500
500
500
567
670
700
700
670
670
781
811
811
811
811
886
886
965
965
965
965
1080
1180
1150
1180
1160
1260
1290
1190
15
15
15
15
19
19
19
19
19
19
19
24
24
24
24
24
24
28
28
28
28
28
28
28
28
287
334
334
334
375
375
410
410
410
410
410
458
458
545
545
545
545
620
620
620
620
680
680
680
680
115
194
194
194
198
198
210
290
290
290
290
310
310
380
380
380
380
380
380
380
380
500
500
500
500
12
12
14
14
16
16
18
18
18
18
18
18
18
18
20
18
20
18
22
18
22
18
18
22
22
45
45
51.5
51.5
59
59
59
64
64
59
59
64
69
69
79.5
69
79.5
69
85
69
85
69
69
85
85
8
8
9
9
10
10
10
11
11
10
10
11
11
11
12
11
12
11
14
11
14
11
11
14
14
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
27
AD
Dimensions of construction form
B5 MT cast ir on
B5 MT
L
M
LA
45°
E
S
N
AC
S
AD
D
P
M160-200
GA
45
°
DB
F
22,5°
M
T
M225-315
(V1 - V3)
Size
M160 M 2-4-6-8P
M160 L 2-4-6-8P
M180 M 2-4P
M180 L 4-6-8P
M200 L 4-8P
M200 LA 2-6P
M200 LB 2-6P
M225 S 2P
M225 S 4-8P
M225 M 2P
M225 M 4-6-8P
M250 M 2P
M250 M 4-6-8P
M280 S 2P
M280 S 4-6-8P
M280 M 2P
M280 M 4-6-8P
M315 S 2P
M315 S 4-6-8P
M315 M 2P
M315 M 4-6-8P
M315 LA 2P
M315 LB 2P
M315 L 4P
M315 L 6-8P
P
N
M
T
S
D
E
F
GA
L
LA
AD
AC
DB
350
350
350
350
400
400
400
450
450
450
450
550
550
550
550
550
550
660
660
660
660
660
660
660
660
250
250
250
250
300
300
300
350
350
350
350
450
450
450
450
450
450
550
550
550
550
550
550
550
550
300
300
300
300
350
350
400
400
400
400
400
500
500
500
500
500
500
600
600
600
600
600
600
600
600
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
24
24
24
24
24
24
24
24
42
42
48
48
55
55
55
55
60
55
60
60
65
65
75
65
75
65
80
65
80
65
65
80
80
110
110
110
110
110
110
110
110
140
110
140
140
140
140
140
140
140
140
170
140
170
140
140
170
170
12
12
14
14
16
16
18
16
18
18
18
18
18
18
20
18
20
18
22
18
22
18
18
22
22
45
45
51.5
51.5
59
59
59
59
64
59
64
64
69
69
79.5
69
79.5
69
85
69
85
69
69
85
85
567
670
700
700
670
670
781
787
811
781
811
886
886
965
965
965
965
1080
1110
1150
1180
1160
1260
1290
1190
19
13
13
13
15
13
15
16
16
15
16
22
22
18
18
18
18
22
22
22
22
22
22
22
22
115
194
194
194
198
198
210
294
210
210
210
210
210
210
210
210
210
225
225
225
225
415
415
415
415
287
334
334
334
375
375
410
410
410
410
410
458
458
545
545
545
545
620
620
620
620
680
680
680
680
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
28
UL appr oved saw arbor
motors
(ETOML, EMOML)
Saw arbor motors are available with UL approval
PRODUCTION STANDARDS
with blade discs (B3)
Coupling dimensions
with coupling flange (B14)
See dimension diagrams (1):
E48 p. 33 – E63 p. 34 – E80 p. 35
a) lateral, with connections towards fan (2) a) lateral, with connections towards fan (2)
b) rear, on fan cover, only on E48 (2)
b) rear, on fan cover, only on E48 (2)
ET from 110 to 760 V
50/60 Hz
ET from 110 to 760 V
50/60 Hz
IP55
IP55
ZZ
ZZ
class F
class F
ET terminal box with lid
ET terminal box with lid
(2 aluminium components)
(2 aluminium components)
with stays tie rods
with stays tie rods
unpainted
unpainted
E48 aluminium – E63 / E80 plastic
E48 aluminium – E63 / E80 plastic
S6 - 60%
S6 - 60%
Terminal box position
Power supply
Protection rating
Bearings
Winding insulation
Terminal box type
Motor clamping
Paint finish
Fan cover
Service factor
(1) Right-hand (DX) or left-hand (SX) thread
to be specified with order
(3) Approved voltage range:
UL three-phase from 110 to 440 V delta,
from 190 to 760 V star
single-phase from 110 to 240 V (50 / 60 Hz)
specify required voltage with order.
(2) Solution a) or b) to be specified with
order
Single Phase 6 studs wiring diagram
Rot B
Rot A
W2
U2
W2
V2
V2
U2
WEIGHT
U1
V1
W1
N
L1
FRAME
W1
V1
U1
E48S
E48M
E48L
E63S
E63L
E80S
E80M
E80L
N
L1
Three phase motors D-Y
230 V
460 V
W2
U2
V2
W2
U2
V2
U1
V1
W1
U1
V1
W1
L1
L2
L3
L1
L2
L3
KGS
7
9.5
10
13
17
27.5
31.5
39
LBS
15.4
21
22
29
37.5
61
69.5
86
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
29
Saw arbor motors
The FPC type brake can be mounted on all ratings of saw arbor motors
type ET/EM on 63 and 80 frames.
Please contact sales office for pricing and availability of these motors.
Size
Braking torque
(Nm)
E63
E80
4
9
Braking torque
(ft.lbs)
5.3
11.9
Power
(W)
Closing time
(ms)
18
25
Release time
(ms)
40
60
100
150
Electromagnet
FPC endframe
Mobil anchor
Key
Self-locking nut
Spring
Adjustment
screw
Washer
Braking gap
Cast iron fan
Motor
shaft
Friction pad
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
30
Braking gap
(mn)
0.2
0.2
Saw arbor motors
TYPE ETSTD
•
•
•
•
230/460V or 575V
IEC FRAMES 48S TO 80L
3 PH-60 HZ-IP55
DUTY-S6-60%
*UL APPROVED*
*ISO 9001 REGISTERED*
3 PHASE MOTORS
2 POLE - 3600 RPM
TYPE
ETSTD48SA2
ETSTD48SB2
ETSTD48MA2
ETSTD48MB2
ETSTD48LA2
ETSTD63SA2
ETSTD63SB2
ETSTD63LA2
ETSTD63LB2
ETSTD63LC2
ETSTD80SA2
ETSTD80SB2
ETSTD80MA2
ETSTD80LA2
4 POLE - 1800 RPM
HP
KW
LIST
0.75
1
1.5
1.8
2
1.5
2
2.5
3
4
4
5.5
7.5
10
0.55
0.75
1.1
1.3
1.5
1.1
1.5
1.85
2.2
3
3
4
5.5
7.5
700
780
820
920
990
1150
1240
1290
1490
1520
1650
1750
1980
2450
TYPE
ETSTD48SA4
ETSTD48MA4
ETSTD48LA4
ETSTD63SA4
ETSTD63SB4
ETSTD63LA4
ETSTD80SA4
ETSTD80MA4
HP
0.5
0.75
1
1
1.5
2
3
4
KW
0.37
0.55
0.75
0.75
1.1
1.5
2.2
3
LIST
890
920
990
1130
1160
1270
1490
1520
TYPE EMSTD
•
•
•
•
230V - 1PH - 60 HZ
IEC FRAMES 48S TO 80L
IP55
DUTY - S6 - 60%
1 PHASE MOTORS
2 POLE - 3600 RPM
TYPE
EMSTD48SA2
EMSTD48SB2
EMSTD48MA2
EMSTD48MB2
EMSTD63SA2
EMSTD63LA2
EMSTD63LB2
EMSTD63LC2
EMSTD80SA2
EMSTD80SB2
EMSTD80SC2
HP
0.5
0.75
1
1.5
1.5
2
2.5
3
2
3
4
KW
0.37
0.55
0.75
1.1
1.1
1.5
1.85
2.2
1.5
2.2
3
LIST
900
1100
1190
1250
1480
1590
1650
1750
1990
2100
2250
These motors are specifically
designed for applications
requiring high power with
smaller frames and lower shaft
heights. They are suitable for
applications such as:
circular saws, pendulam saws,
polishing machines,
grinding machines and others.
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
31
Dimensions of constructio n
form saw arbor motors
HB
DISTANCE BETWEEN
SHAFTS 48 MM (E48),
THREE-PHASE WITH
BLADE DISCS (B3)
L
E
T
AF
AD
AL
H
F
P
M
AC
G
LA
Y
B
A
AB
LB
Size
A
AB
AC
B
E
F
G
E48S
E48M
E48L
48
48
48
95
95
95
115
115
115
150
200
220
33
33
33
8
8
8
27
27
27
H
HB
57.5 47.5
57.5 47.5
57.5 47.5
L
LB
K
Y
M
P
T
AD
AF
AL
LA
321
371
391
259
303
323
7
7
7
6
6
6
73.5
73.5
73.5
90
90
90
10
10
10
109
109
109
94
94
94
63
113
133
5
5
5
L
DISTANCE BETWEEN
SHAFTS 48 MM (E48),
SINGLE-PHASE WITH
BLADE DISCS (B3)
E
HB
AP
T
AF
AD
AL
M
A
B
AB
LB
95
95
G
33
33
8
8
27
27
H
HB
L
LB
K
Y
M
P
T
AD
AF
AL
AP LA
57.5 47.5 279 212
57.5 47.5 329 262
7
7
6
6
73.5
73.5
90
90
10
10
115
115
92
92
63
113
121
121
ø 90
ø 90
M. 18X1,5*
115 150
115 200
F
Viring
Viring
Detail of standard shaft end
Detail of optional shaft end
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
32
ø 60
48
48
E
,
ø 25,4 - 1
E48S
E48M
B
M. 18X1,5*
AB AC
ø 60
A
ø 25
Size
K
H
G
P
Y
LA
AC
F
5
5
Dimensions of cons tructio n
form saw arbor motors
L
AL
AF
HB
K
H
F
AF
AC
P
AD
G
E
AA
DISTANCE BETWEEN
SHAFTS 63/71 MM (E63),
THREE-PHASE WITH
BLADE DISCS (B3)
Y
B
A
LB
LA
AB
AB
AC
AA
B
E
F
G
H
HB
L
LB
K
Y
P
AD
AF
AL
LA
120 140
120 140
128
128
80
80
180
240
49
49
10
10
32
32
63
63
71
71
330
390
247
307
10
10
8
8
114
114
125
125
111
111
77
137
20
20
L
DISTANCE BETWEEN
SHAFTS 63/71 MM (E63),
SINGLE-PHASE WITH
BLADE DISCS (B3)
E
AP
HB
AD
AF
K
H
F
P
AC
AL
G
E63S
E63L
A
AA
Size
Y
B
LA
LB
AD
AA
B
E
F
G
H
HB
L
LB
K
Y
P
E63S
E63L
120
120
140
140
128
128
80
80
180
240
49
49
10
10
32
32
63
63
71
71
330
390
247
307
10
10
8
8
114
114
AD
AF
AP
AL
LA
143 120
143 120
146
146
71
131
20
20
Ø 30 h 7
AB
M 22X1,5
A
Ø 11 4
Size
A
AB
Viring
Detail of FPC brake application
Detail of standard shaft end
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
33
Dimensions of constructio n
form saw arbor motors
L
E
AF
AD
HB
G
AC
P
AA
AL
AF
DISTANCE BETWEEN
SHAFTS 80 MM (E80),
THREE-PHASE WITH
BLADE DISCS (B3)
K
H
F
B
LA
Y
LB
A
AB
Size
A
AB
AC
AA
B
E
F
G
H
HB
L
LB
K
Y
P
AD
AF
AL
LA
E80S
E80M
E80L
125
125
125
160
160
160
156
156
156
110
110
110
230
280
350
58
58
58
12
12
12
46
46
46
80
80
80
80
80
80
421
471
541
320
370
440
10
10
10
10
10
10
140
140
140
135
135
135
111
111
111
125
175
245
23
23
23
L
DISTANCE BETWEEN
SHAFTS 80 MM (E80),
SINGLE-PHASE WITH
BLADE DISCS (B3)
E
AP
AL
HB
AD
K
H
AF
G
AA
AC
P
F
Y
B
LA
LB
A
AB
AB
AC
AA
B
E
F
G
H
HB
L
LB
K
Y
P
AD
AF
AL
AP
LA
E80S
E80M
125
125
160
160
156
156
110
110
230
280
58
58
12
12
46
46
80
80
80
80
421
471
320
370
10
10
10
10
140
140
152
152
119
119
120
170
146
146
23
23
Ø 140
Ø 35
A
M. 30X2
Size
Viring
Detail of FPC brake application
Detail of standard shaft end
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
34
ERTER
V
IN
Nema - 3 Phase motors
DUTY
•
•
•
•
•
CLASS F INSULATION - TEFC (IP55)
INVERTER READY - 10:1 VARIABLE TORQUE - 5:1 CONSTANT TORQUE
COMPACT LIGHTWEIGHT DESIGN - CAST ALUMINIUM BODY
MULTI-MOUNT DESIGN CABLE FITTINGS SUPPLIED
REMOVABLE FEET
*CSA APPROVED*
*UL APPROVED*
*ISO 9001 REGISTERED*
Three phase motors Nema 9 wires
Three phase motors Nema 6 wires
WEIGHT
1
1
4
6
7
1
4
8
6
9
4
3
5
5
2
5
2
6
3
2
3
Low voltage
Low voltage
230V
L2
L3
JOIN
L1
L2
L3
1&7
2&8
3&9
4&5&6
1&6
2&4
3&5
460V
L1
L2
L3
1
2
3
KGS
LBS
N56
N56H
N143
N145
N182
N184
N213
N215
13
18.5
14.5
19
36
36
44
61
29
41
32
42
79.5
79.5
97
134.5
330V
L1
High voltage
FRAME
High voltage
575V
JOIN
L1
L2
L3
JOIN
4&7, 5&8, 6&9
1
2
3
4&5&6
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
35
Nema - 3 Phase motors
56/140 frame
TYPE NT
•
•
•
•
•
*CSA APPROVED
*UL APPROVED
2 POLE - 3600 RPM
TYPE
NT56A2
NT56B2
NT56C2
NT56D2
NT56E2
NT143TB2
NT56HA2
NT145TA2
NT56HB2
NT145TB2
HP
FRAME
LIST
0.33
0.50
0.75
1
1.5
1.5
2
2
3
3
56C
56C
56C
56C
56C
143TC
56C
145TC
56C
145TC
287
294
300
334
375
375
444
444
477
477
6 POLE - 1200 RPM
TYPE
NT56A6
NT56B6
NT56C6
NT56D6
NT56HA6
HP
0.25
0.33
0.50
0.75
1
FRAME
56C
56C
56C
56C
56C
LIST
230/460V or 575V
3 Ph—60 Hz—IP55
Removable Feet
Multi-mount design
Service Factor 1.15
4 POLE - 1800 RPM
TYPE
NT56A4
NT56B4
NT56C4
NT56D4
NT56E4
NT143TA4
NT56F4
NT145TB4
NT56HA4
NT145TC4
HP
FRAME
LIST
0.25
0.33
0.50
0.75
1
1
1.5
1.5
2
2
56C
56C
56C
56C
56C
143TC
56C
145TC
56C
145TC
317
324
330
337
354
354
390
390
467
467
ADD SUFFIX TO PART
NUMBER FOR VOLTAGE.
575V = /1
230/460V = /2
347
337
365
400
403
WHEN ORDERING FOOT MOUNTED MOTOR:
REMOVE “CF” FROM PART NUMBER
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
36
Nema 3 Phase High Efficiency
Motors Frame 180T - 210T
TYPE NT
•
•
•
•
•
*CSA APPROVED
*UL APPROVED
*ISO 9001 REGISTERED
*EFFICIENCY VERIFIED
*CE MARK
230/460V or 575V
3 Ph—60 Hz—IP55
Removable Feet
Multi-mount design
Service Factor 1.15
Suitable for use at 380V 50Hz
NEMA 3 PHASE
575V
230/460V
HP
RPM
FRAME
NT1.565
NT265
NT325
NT345
NT365
NT525
NT545
NT565
NT7.525-184T
NT7.525
NT7.545
NT1025
NT1045
NT1525-215T
NT1.564
NT264
NT324
NT344
NT364
NT524
NT544
NT564
NT7.524-184T
NT7.524
NT7.544
NT1024
NT1044
NT1524-215T
1.5
2
3
3
3
5
5
5
7.5
7.5
7.5
10
10
15
1200
1200
3600
1800
1200
3600
1800
1200
3600
3600
1800
3600
1800
3600
182T
184T
182T
182T
213T
184T
184T
215T
184T
213T
213T
215T
215T
215T
10:1 VARIABLE TORQUE
4:1 CONSTANT TORQUE
AVAILABLE BY
FACTORY ORDER
* MINIMUM QUANTITY
MAY BE REQUIRED
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
37
Nema - 3 Phase DC Rectified
Brake Motors frame 56-215
• 230/460V & 575V 3PH 60HZ
• FITTED WITH LENZE DC RECTIFIED
SPRING APPLIED FAIL SAFE DISC BRAKES
• REMOVABLE FEET MULTI-MOUNT DESIGN
• HAND RELEASE LEVERS (OPTIONAL)
• SERVICE FACTOR 1.15
• SUITABLE FOR USE AT 380V 50HZ 1.0 SF
NEMA - 3 PHASE DC RECTIFIED BRAKE MOTORS
HP
RPM
0.25
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
0.33
0.5
0.75
1
1.5
2
1
1.5
2
3
5
7.5
10
FRAME
56C
56C
56C
56C
56C
56C
56C
143T
143T
145T
145T
145T
145T
182T
182T
184T
184T
213T
213T
215T
215T
CAT NO.
VOLTAGE
BNT56P2545CF
BNT56P2544CF
BNT56P3345CF
BNT56P3344CF
BNT56P545CF
BNT56P544CF
BNT56P7545CF
BNT56P7544CF
BNT56145CF
BNT56144CF
BNT561P545CF
BNT561P544CF
BNT56245CF
BNT56244CF
BNT145
BNT144
BNT1.545
BNT1.544
BNT245
BNT244
BNT345
BNT344
BNT545
BNT544
BNT7.545
BNT7.544
BNT1045
BNT1044
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
575
230/460
TORQUE
LB.FT.
3
6
6
6
12
12
12
12
12
12
44
44
44
111
WEIGHT
FRAME
KGS
LBS
N56
N56H
N143
N145
N182
N184
N213
N215
21
26
22
26.5
44
44
65
80
46
57
48.5
58.5
97
97
143
176
* 56h frames have mounting holes for NEMA 56 and NEMA 143-5T frames
and a standard NEMA 56 frame shaft
FACTORY ORDER ONLY
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
38
Dimensions of construction form
Nema - Foot Mounted-and “C” Fac e
TEFC 3 Phase
C1
C
N-W
AB
BF
AH
AA
45°
45°
4 HOLE
BB
V
AJ
P
AK
O
BD
U
D
H
BA
2F
E
E
S
R
C1
C
U
AB
N-W
AA
V
O
P
U
D
H
2F
BA
E
E
C1 = Dimension with Brake
NEMA
Frame
D
E
2F
BA
H
U
N-W
R
V
S
C
C1
O
P
AB
AJ
AK
BB
BD
BF
AH
AA NPT
56/C
56/CH
143T/TC
145T/TC
182T/TC
184T/TC
213T/TC
215T/TC
3-1/2
2-7/16
3
2-3/4
11/32 SLOT
5/8
1-7/8
33/64
1-13/32
3/16
11-5/8
13-3/4
6-23/32
6-19/64
5-5/8
5-7/8
4-1/2
1/8
6-1/2
3/8-16
2-1/16
1/2
3-1/2
2-7/16
5
2-3/4
11/32 SLOT
5/8
1-7/8
33/64
1-13/32
3/16
12-7/8
14-15/16
7-1/32
7-1/32
5-12/16
5-7/8
4-1/2
1/8
6-1/2
3/8-16
2-1/16
1/2
3-1/2
2-3/4
4
2-3/4
11/32 SLOT
7/8
2-1/4
49/64
1-13/32
3/16
13-7/32
15-17/64
7-1/32
7-1/32
5-12/16
5-7/8
4-1/2
1/8
6-1/2
3/8-16
2-1/8
3/4
3-1/2
2-3/4
5
2-3/4
11/32 SLOT
7/8
2-1/4
49/64
1-13/32
3/16
13-7/32
15-17/64
7-1/32
7-1/32
5-12/16
5-7/8
4-1/2
1/8
6-1/2
3/8-16
2-1/8
3/4
4-1/2
3-3/4
4-1/2
2-3/4
13/32 SLOT
1-1/8
2-3/4
63/64
1-25/32
1/4
16-12/32
18-13/16
8-27/32
8-21/32
6-9/32
7-1/4
8-1/2
1/4
9
1/2-13
2-5/8
3/4
4-1/2
3-3/4
5-1/2
2-3/4
13/32 SLOT
1-1/8
2-3/4
63/64
1-25/32
1/4
16-12/32
18-13/16
8-27/32
8-21/32
6-9/32
7-1/4
8-1/2
1/4
9
1/2-13
2-5/8
3/4
5-1/4
4-1/4
5-1/2
3-1/2
13/32 SLOT
1-3/8
3-3/8
1-13/64
2-13/32
5/16
19-15/16
22-53/64
10-3/8
10-1/4
7-9/32
7-1/4
8-1/2
1/4
9
1/2-13
3-1/8
3/4
5-1/4
4-1/4
7
3-1/2
13/32 SLOT
1-3/8
3-3/8
1-13/64
2-13/32
5/16
19-15/16
22-53/64
10-3/8
10-1/4
7-9/32
7-1/4
8-1/2
1/4
9
1/2-13
3-1/8
3/4
* BA dimension in “C” Face frame 182 thru 215 is the same as in Foot Mounted motors
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
39
Options for Inverter-duty
Three-phase motors
Particular care is dedicated to these versions, based on standard motors, during
the construction phase:
- phase separators
- double impregnation
- low losses laminations
- low balancing level
Fixed Speed ventilation (servoventilation): from sizes M71 to M132
servoventilation kits are used, with a single-phase voltage, housed in the fan cover.
From sizes M160 to M315 a three-phase motor is installed inside the fan cover,
with suitable characteristics for the application.
Electronic speed control equipment: encoder, resolver, tacho - generator - factory delivery
Servoventilation kit
SIZE
Absorbed Power
(W)
Nominal Current
In (A)
Nominal Tension
VN (V)
Speed no.
RPM
M71
M80
M90
M100
M112
M132
M160
M180
M200
M225
M250
M280
M315
18
18
39
39
50
50
150
270
840
840
1080
1500
1500
0.1
0.1
0.2
0.2
0.25
0.25
0.26
0.41
2.6/1.5
2.6/1.5
3.4/2.1
5/2.9
5/2.9
230
230
230
230
230
230
230/400
230/400
230/400
230/400
230/400
230/400
230/400
3180
3180
3444
3444
3288
3288
2900
2800
1632
1632
1692
1692
1692
Axial dimension of motors for electronic control
FRAME
M71
M80
M90S
M90L
M100
M112
M132S
M132L
M160M
M160L
M180M/L
M200L
M225S/M
M250M
M280S/M
M315S/M
M315L
LV
L VE
256
250
272
297
382
387
454
494
660
695
803
870
890
984
1100
1275
1375
306
300
322
347
432
437
504
544
720
755
863
960
980
1074
1190
1365
1465
WITH ADDED VENTILATION
KITS = 0 - 100 Hz CAPABILITY
Lve
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
40
Lv
Three-phase high
efficiency motors
TYPE MTEPS
2 POLES - 3600 RPM
TYPE
Pn
MTEPS90SA2
MTEPS90LA2
MTEPS100LA2
MTEPS100LB2
MTEPS112MA2
MTEPS112MB2
MTEPS132SA2
MTEPS132SB2
MTEPS132MB2
MTEPS160MA2
MTEPS160MB2
MTEPS180MA2
MTEPS180MB2
EFF
Hp
Kw
%
2
3
4
5
5.5
7.5
7.5
10
15
15
20
25
30
1.5
2.2
3
3.7
4
5.5
5.5
7.5
11
11
15
18.5
22
84
85.5
85.5
87.5
87.5
88.5
89.5
90.2
90.2
90.2
91
91
91
CosF
0.85
0.83
0.85
0.86
0.84
0.85
0.91
0.88
0.91
0.88
0.86
0.8
0.8
rpm
Mn
min-¹
Nm
3510
3485
3510
3505
3540
3500
3520
3540
3500
3535
3560
3580
3575
4.08
6.03
8.15
10
10.9
n/a
14.8
20.2
n/a
29.7
40.2
49.3
58.7
Mm/Mn
Ms/Mn
5.4
3.7
3
2.8
2.9
n/a
2.9
4.9
n/a
3.4
3.5
3.6
5
Is/In
5
3.3
2.7
2.5
2.6
n/a
2.6
3.8
n/a
2.7
3.3
3.4
3.4
9.4
8.9
8.3
8.1
8.2
n/a
6.9
10.9
n/a
8.3
8.8
9
9
Ms/Mn
Is/In
In(230V) In(460V) In(575V)
A
A
A
5.28
7.78
10.12
12.34
13.66
18.4
16.96
23.72
33.4
34.78
48.12
63.80
75.20
2.64
3.89
5.06
6.17
6.83
9.2
8.48
11.86
16.7
17.39
24.06
31.9
37.6
2.11
3.11
4.05
4.94
5.46
7.36
6.78
9.49
13.36
13.91
19.25
25.52
30.08
4 POLES - 1800 RPM
TYPE
Pn
MTEPS90SA4
MTEPS90LA4
MTEPS100LA4
MTEPS100LB4
MTEPS112MA4
MTEPS112MB4*
MTEPS132SA4
MTEPS132MA4
MTEPS132MC4
MTEPS160MA4
MTEPS160LA4
MTEPS180MA4
MTEPS180LA4
EFF
Hp
Kw
%
1.5
2
3
4
5.5
7.5
7.5
10
15
15
20
25
30
1.1
1.5
2.2
3
4
5.5
5.5
7.5
11
11
15
18.5
22
84
84
87.5
85.5
87.5
89.5
89.5
89.5
91
91.7
91.7
92.4
92.4
CosF
0.72
0.78
0.78
0.74
0.78
0.78
0.76
0.81
0.85
0.83
0.82
0.82
0.82
rpm
Mn
min-¹
Nm
1745
1725
1760
1740
1750
1755
1765
1760
1720
1770
1770
1780
1780
6.09
8.3
12
16.3
20.13
20.13
29.76
40.7
n/a
59.7
80.9
99.2
118
Mm/Mn
4
4
4
4
3.9
3.9
4.2
3.6
n/a
3
3.2
2.8
2.9
3.2
3
2.8
2.9
2.5
2.5
3.9
3
n/a
2.5
2.6
2.7
2.8
6.5
7
7.7
6.9
7.5
7.5
7.7
7.1
n/a
6.7
6.9
8.1
8.6
In(230V) In(460V) In(575V)
A
A
A
4.56
5.70
8.10
11.76
14.71
19.78
20.30
25.97
38.2
36.28
50.07
61.29
72.89
2.28
2.85
4.05
5.88
7.36
9.89
10.15
12.98
19.1
18.14
25.04
30.65
36.44
1.82
2.28
3.24
4.70
5.88
7.91
8.12
10.39
15.3
14.51
20.03
24.52
29.15
* Does not match EPACT at full load
6 POLES - 1200 RPM
TYPE
MTEPS90LA6
MTEPS100LA6
MTEPS112MA6
MTEPS132SA6
MTEPS132MA6
MTEPS132MB6
MTEPS160MA6
MTEPS160LA6
MTEPS180MA6
Pn
EFF
Hp
Kw
%
1
2
3
4
5.5
7.5
7.5
10
15
0.75
1.5
2.2
3
4
5.5
5.5
7.5
11
80
85.5
87.5
87.5
87.5
89.5
89.5
89.5
90.2
CosF
0.6
0.75
0.78
0.78
0.75
0.77
0.72
0.7
0.75
rpm
Mn
min-¹
Nm
1145
1160
1160
1165
1165
1150
1175
1175
1170
6.20
12.30
18.11
24.60
32.80
45.60
44.70
60.90
89.80
Mm/Mn
2.8
2.8
3.2
2.8
3.3
3.3
4.5
4.3
4.4
Ms/Mn
2.6
2.2
2.3
1.7
2.2
2.2
3.1
2.9
3
Is/In
4.6
5.2
5.9
5.7
6
6
6.1
6
6.5
In(230V) In(460V) In(575V)
A
A
A
3.90
5.90
8.09
11.00
15.20
20.00
21.40
30.00
40.80
1.95
2.95
4.05
5.50
7.60
10.00
10.70
15.00
20.40
1.56
2.36
3.24
4.40
6.08
8.00
8.56
12.00
16.32
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
41
Three-phase motors
TYPE MTOML
2 POLES - 3600 RPM
TYPE
MTOML56B2
MTOML63A2
MTOML63B2
MTOML63C2
MTOML71A2
MTOML71B2
MTOML71C2
MTOML80A2
MTOML80B2
MTOML80C2
MTOML90SA2
MTOML90SB2
MTOML90LA2
MTOML90LB2
MTOML100LB2
MTOML112MB2
MTOML132SA2
MTOML132MA2
MTOML132MB2
MTOML160LB2
MTOML180MA2
Pn
rpm
Hp
Kw
min-¹
0.18
0.25
0.35
0.5
0.5
0.75
1
1
1.5
2
2
2.5
3
4
5.5
7.5
10
15
20
30
30
0.135
0.185
0.25
0.37
0.37
0.55
0.75
0.75
1.1
1.5
1.5
1.85
2.2
3
4
5.5
7.5
11
15
22
22
3360
3370
3390
3380
3395
3360
3430
3395
3385
3360
3385
3395
3400
3445
3455
3480
3500
3510
3500
3525
3510
Cos EFF
0.7
0.77
0.75
0.74
0.8
0.82
0.8
0.81
0.8
0.75
0.8
0.82
0.85
0.83
0.82
0.82
0.78
0.81
0.86
0.87
0.89
Mn
Mm/Mn
Ms/Mn
%
Nm
63
67
65
65
68
73
69
73
75
75
80
75
78
80
79
80
82
83
84
87
90
0.38
0.52
0.70
1.05
1.04
1.56
2.09
2.11
3.10
3.3
3.6
3.4
3.4
3.3
2.9
4.4
3.5
3.6
3.3
3.6
3.5
3.3
3.2
2.8
4.3
3.5
3.5
4.23
5.20
6.18
8.32
11.06
15.09
20.46
29.93
40.93
59.60
59.85
3.9
3.0
3.2
3.7
4.3
3.4
3.7
3.7
3.9
4.2
3.5
3.7
3.0
3.2
3.6
4.2
3.4
3.5
3.6
3.6
3.5
2.9
Is/In
Weight In(230V) In(460V) In(575V)
Kg
A
A
A
3.9
4.5
5.1
5.0
5.4
5.6
5.6
5.8
6.5
3.4
4.1
4.4
4.9
5.8
6.5
6.6
8.4
9.5
5.7
5.5
6.1
6.6
7.2
7.4
7.7
7.7
7.2
8.0
8.0
12.3
12.8
15
17.5
24
31.6
42.5
52.5
59
109
170
0.77
0.90
1.29
1.93
1.71
2.31
3.41
3.18
4.60
6.6
5.88
7.55
8.33
11.34
15.50
21.05
29.44
41.07
52.12
72.96
68.94
0.38
0.45
0.64
0.97
0.85
1.15
1.71
1.59
2.30
3.3
2.94
3.78
4.16
5.67
7.75
10.52
14.72
20.54
26.06
36.48
34.47
0.38
0.36
0.52
0.77
0.68
0.92
1.36
1.27
1.84
2.64
2.35
3.02
3.33
4.54
6.20
8.42
11.78
16.42
20.85
29.18
27.58
4 POLES - 1800 RPM
TYPE
MTOML56A4
MTOML63A4
MTOML63B4
MTOML63C4
MTOML71A4
MTOML71B4
MTOML71C4
MTOML80A4
MTOML80B4
MTOML80C4
MTOML90SA4
MTOML90LB4
MTOML100LA4
MTOML100LB4
MTOML100LC4
MTOML132S4
MTOML132MA4
MTOML132MB4
MTOML160MA4
MTOML160LA4
MTOML180LA4
Pn
rpm
Hp
Kw
min-¹
0.12
0.18
0.25
0.35
0.35
0.5
0.75
0.75
1
1.5
2
2.5
3
4
5.5
7.5
10
12.5
15
20
30
0.09
0.135
0.185
0.25
0.25
0.37
0.55
0.55
0.75
1.1
1.5
1.85
2.2
3
4
5.5
7.5
9.2
11
15
22
1638
1632
1650
1608
1692
1656
1626
1692
1692
1686
1698
1686
1710
1690
1680
1700
1750
1722
1750
1750
1750
Cos
0.65
0.65
0.7
0.66
0.73
0.71
0.79
0.8
0.75
0.77
0.76
0.79
0.73
0.79
0.84
0.81
0.78
0.83
0.81
0.8
0.86
EFF
Mn
%
Nm
55
58
60
60
60
67
68
65
69
73
75
77
78
79
77
83
85
85
89
90
91
0.52
0.79
1.07
1.48
1.41
2.13
3.23
3.10
4.23
6.23
8.44
10.48
12.29
16.95
22.74
30.89
40.93
51.02
60.02
81.85
120.05
Mm/Mn
2.8
2.3
2.9
3.1
3.0
2.9
2.8
2.6
2.8
2.5
3.5
4.3
3.0
3.0
2.3
3.6
2.9
3.4
2.6
2.5
2.8
Ms/Mn
2.8
2.2
2.8
2.9
2.9
2.8
2.8
2.5
2.4
2.4
3.4
3.5
2.9
2.9
2.2
3.1
2.9
3.0
2.4
3.1
2.4
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
42
Is/In
2.9
2.8
3.3
3.4
5.0
4.4
4.4
4.4
4.8
5.2
5.5
5.7
5.5
5.8
5.1
6.6
6.4
6.3
5.7
6.1
6.8
Weight
In(230V) In(460V)
Kg
A
A
3.1
4
4.6
5
6
6.6
7
8
9.5
11.7
14.5
16.5
18.5
21.4
23.5
34.5
52.5
56.5
79.2
97.5
170
0.63
0.90
1.11
1.58
1.43
1.95
2.57
2.66
3.64
4.91
6.61
7.63
9.70
12.07
15.52
20.54
28.40
32.73
38.30
52.30
70.57
0.32
0.45
0.55
0.79
0.72
0.98
1.29
1.33
1.82
2.46
3.30
3.82
4.85
6.03
7.76
10.27
14.20
16.37
19.15
26.15
35.28
Three-phase motors
TYPE MTOML
6 POLES - 1200 RPM
TYPE
Pn
MTOML63B6
MTOML71A6
MTOML71B6
MTOML80A6
MTOML80B6
MTOML90SA6
MTOML90LA6
MTOML100LA6
MTOML112MA6
MTOML132SA6
MTOML132MA6
MTOML132MB6
MTOML160MA6
MTOML160LA6
MTOML180LA6
rpm
Hp
Kw
min-¹
0.18
0.25
0.35
0.5
0.75
1
1.5
2
3
4
5.5
7.5
10
15
20
0.135
0.185
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
1032
1080
1092
1098
1080
1104
1092
1128
1146
1140
1152
1140
1152
1170
1164
Cos
0.56
0.6
0.62
0.73
0.74
0.65
0.73
0.68
0.77
0.77
0.75
0.79
0.8
0.75
0.84
EFF
Mn
%
Nm
40
55
55
60
64
66
68
73
78
75
82
81
86
87
88
1.25
1.64
2.19
3.22
4.86
6.49
9.62
12.70
18.33
25.13
33.16
46.07
62.17
89.78
123.06
Mm/Mn Ms/Mn
2.1
2.3
2.4
2.4
2.4
2.4
2.4
2.4
2.9
2.4
2.4
2.4
2.4
2.4
2.4
Is/In
Weight
In(230V) In(460V) In(575V)
Kg
A
A
A
2.0
2.6
2.8
3.0
3.3
3.7
3.9
5.1
5.6
5.1
5.5
4.4
5.5
6.1
7.7
5
6.6
7.7
8.3
10
12
14.3
19
30
40
46.4
52.5
78
110
155
1.51
1.41
1.84
2.12
2.92
4.39
5.56
7.59
9.19
13.04
16.33
21.58
27.36
42.32
50.94
0.76
0.70
0.92
1.06
1.46
2.19
2.78
3.79
4.60
6.52
8.16
10.79
13.68
21.16
25.47
0.61
0.56
0.74
0.85
1.17
1.76
2.23
3.03
3.68
5.22
6.53
8.63
10.95
16.93
20.38
Is/In
Weight
2.0
2.3
2.3
2.2
2.0
2.3
2.5
2.5
1.4
1.8
2.2
1.7
2.8
2.9
2.5
8 POLES - 900 RPM
TYPE
Pn
MTOML71A8
MTOML80A8
MTOML80B8
MTOML90SA8
MTOML90LA8
MTOML100LA8
MTOML100LB8
MTOML112MA8
MTOML132SA8
MTOML132MA8
MTOML160MA8
MTOML160LA8
MTOML160LB8
MTOML180LA8
rpm
Hp
Kw
min-¹
0.18
0.25
0.35
0.5
0.75
1
1.5
2
3
4
5.5
7.5
10
15
0.135
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
804
816
780
828
816
840
828
840
852
858
876
864
858
870
Cos
EFF
Mn
%
Nm
0.6
0.6
0.64
0.65
0.68
0.69
0.66
0.65
0.66
0.69
0.65
0.65
0.75
0.74
50
55
56
60
58
64
67
67
73
78
81
80
84
87
1.60
2.11
3.06
4.27
6.44
8.53
12.69
17.05
24.66
33.39
43.60
60.79
83.47
120.74
Mm/Mn Ms/Mn
2.6
2.5
2.4
2.5
2.3
2.3
2.1
2.2
2.8
2.4
2.8
3.0
2.4
3.0
2.6
2.6
2.1
2.2
2.2
2.1
1.7
1.8
2.2
1.9
2.3
2.6
2.2
2.4
2.3
2.4
2.5
2.8
3.0
3.3
3.3
3.3
3.9
4.4
4.4
5.0
4.4
6.6
In(230V) In(460V) In(575V)
Kg
A
A
A
7.5
8.7
10
12.6
14.5
18.9
22.3
27.3
44.8
52
84
90
110
155
1.13
1.37
1.75
2.38
3.50
4.26
6.24
8.65
11.46
13.99
19.07
26.55
29.88
42.89
0.56
0.68
0.88
1.19
1.75
2.13
3.12
4.32
5.73
7.00
9.54
13.28
14.94
21.44
0.45
0.55
0.70
0.95
1.40
1.71
2.50
3.46
4.58
5.60
7.63
10.62
11.95
17.16
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
43
Brake motors
Three-phase DC rectified
TYPE MTFHC
2 POLES - 3600 RPM
TYPE
MTFHC63A2
MTFHC63B2
MTFHC71A2
MTFHC71B2
MTFHC80A2
MTFHC80B2
MTFHC90SA2
MTFHC90SB2
MTFHC90LA2
MTFHC100LB2
MTFHC100LB2
MTFHC112MA2
MTFHC112MB2
MTFHC132SA2
MTFHC132SB2
MTFHC160MA2
MTFHC160MB2
MTFHC180MA2
MTFHC180LA2
Pn
rpm
Cos
Hp
Kw
min-¹
0.25
0.35
0.5
0.75
1
1.5
2
2.5
3
4
5.5
5.5
7.5
7.5
10
15
20
25
30
0.185
0.25
0.37
0.55
0.75
1.1
1.5
1.85
2.2
3
4
4
5.5
5.5
7.5
11
15
18.5
22
3372
3396
3396
3360
3396
3385
3385
3395
3396
3440
3455
3480
3480
3480
3504
3528
3546
3580
3575
0.77
0.75
0.8
0.81
0.81
0.8
0.8
0.82
0.85
0.83
0.82
0.8
0.82
0.82
0.78
0.86
0.86
0.8
0.8
EFF
Mn
%
Nm
67
65
68
73
73
75
80
75
78
79
79
82
80
79
82
84
86
91
91
0.52
0.70
1.04
1.56
2.11
3.10
4.23
5.20
6.19
8.33
11.06
10.98
15.09
15.09
20.44
29.77
40.39
49.35
58.76
Mm/Mn
Ms/Mn
3.5
3.5
3.3
3.3
2.9
3.6
3.9
3.0
3.2
3.7
4.3
3.7
3.4
3.3
3.7
3.6
3.9
3.7
3.7
Is/In
3.6
3.4
3.2
3.3
2.8
3.5
3.7
3.0
3.2
3.5
4.2
3.0
3.4
3.3
3.5
3.4
4.3
4.0
5.5
4.5
5.1
5.4
5.8
5.6
6.5
5.7
5.5
6.1
6.2
7.2
7.2
7.4
7.6
7.7
7.4
8.3
9.9
9.9
Ms/Mn
Is/In
In(230V) In(460V)
Kg
A
0.90
1.29
1.71
2.33
3.18
4.60
5.88
7.55
8.33
11.48
15.50
15.31
21.05
21.31
29.44
38.22
50.91
63.79
75.86
0.45
0.64
0.85
1.17
1.59
2.30
2.94
3.78
4.16
5.74
7.75
7.65
10.52
10.66
14.72
19.11
25.46
31.89
37.93
4 POLES - 1800 RPM
TYPE
MTFHC63A4
MTFHC63B4
MTFHC71A4
MTFHC71B4
MTFHC71C4
MTFHC80A4
MTFHC80B4
MTFHC90SA4
MTFHC90LA4
MTFHC90LB4
MTFHC100LA4
MTFHC100LB4
MTFHC112MA4
MTFHC132SA4
MTFHC132MA4
MTFHC160MA4
MTFHC160LA4
MTFHC180MA4
MTFHC180LA4
Pn
rpm
Hp
Kw
min-¹
0.18
0.25
0.35
0.5
0.75
0.75
1
1.5
2
2.5
3
4
5.5
7.5
10
15
20
25
30
0.135
0.185
0.25
0.37
0.55
0.55
0.75
1.1
1.5
1.85
2.2
3
4
5.5
7.5
11
15
18.5
22
1632
1650
1692
1656
1626
1692
1692
1680
1698
1686
1716
1692
1680
1710
1716
1758
1752
1780
1780
Cos
0.65
0.7
0.73
0.71
0.79
0.8
0.75
0.83
0.76
0.79
0.75
0.79
0.84
0.85
0.84
0.81
0.8
0.82
0.82
EFF
Mn
%
Nm
58
60
60
67
68
65
69
75
75
77
79
79
77
81
84
89
86
92.4
92.4
0.79
1.07
1.41
2.13
3.23
3.10
4.23
6.25
8.44
10.48
12.24
16.93
22.74
30.71
41.74
59.75
81.76
99.25
118.03
Mm/Mn
2.3
2.9
3.0
2.9
2.8
2.6
2.8
2.9
3.5
4.3
3.0
2.9
2.3
2.9
3.0
2.4
2.8
3.0
3.1
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
44
2.2
2.8
2.9
2.8
2.8
2.5
2.4
2.8
3.4
3.5
2.9
3.0
2.2
2.8
3.0
2.6
2.9
3.1
3.2
2.8
3.3
5.0
4.4
4.4
4.4
4.8
5.3
5.5
5.7
5.5
5.8
5.1
5.6
6.6
7.9
6.4
8.9
9.5
In(230V) In(460V)
Kg
A
0.90
1.11
1.43
1.95
2.57
2.66
3.64
4.44
6.61
7.63
9.32
12.07
15.52
20.05
26.68
38.30
54.73
61.29
72.89
0.45
0.55
0.72
0.98
1.29
1.33
1.82
2.22
3.30
3.82
4.66
6.03
7.76
10.03
13.34
19.15
27.36
30.65
36.44
Brake motors
Three-phase DC rectified
TYPE MTFHC
6 POLES - 1200 RPM
TYPE
Pn
MTFHC63A6
MTFHC71A6
MTFHC71B6
MTFHC80A6
MTFHC80B6
MTFHC90SA6
MTFHC90LA6
MTFHC100LA6
MTFHC112MA6
MTFHC132SA6
MTFHC132MA6
MTFHC132MB6
MTFHC160MA6
MTFHC160LA6
rpm
Hp
Kw
min-¹
0.17
0.25
0.35
0.5
0.75
1
1.5
2
3
4
5.5
7.5
7.5
10
0.12
0.185
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
5.5
7.5
1032
1080
1092
1098
1080
1104
1092
1128
1146
1140
1152
1140
1145
1152
Cos
0.56
0.6
0.62
0.73
0.74
0.65
0.73
0.68
0.77
0.77
0.75
0.79
0.79
0.8
EFF
Mn
%
Nm
40
55
55
60
64
66
68
73
78
75
82
81
83
86
1.33
1.96
2.62
3.86
5.8
7.8
11.6
15.2
22
30.2
39.6
56
57
74.6
Mm/Mn
Ms/Mn
2.1
2.3
2.4
2.4
2.4
2.4
2.4
2.4
2.9
2.8
2.4
2.4
2.4
2.5
Is/In
2.0
2.3
2.3
2.2
2.0
2.3
2.5
2.5
1.7
1.8
2.2
1.7
1.7
2.8
2.0
2.6
2.8
3.0
3.3
3.7
3.9
5.1
5.6
5.1
5.5
4.4
4.5
5.5
Ms/Mn
Is/In
In(230V) In(460V)
Kg
A
1.34
1.41
1.84
2.12
2.92
4.39
5.56
7.59
9.19
13.04
16.33
21.58
21.70
27.36
0.67
0.70
0.92
1.06
1.46
2.19
2.78
3.79
4.60
6.52
8.16
10.79
10.53
13.68
8 POLES - 900 RPM
TYPE
Pn
MTFHC80A8
MTFHC80B8
MTFHC90SA8
MTFHC90LA8
MTFHC100LA8
MTFHC100LB8
MTFHC112MA8
MTFHC132SA8
MTFHC132MA8
rpm
Hp
Kw
min-¹
0.25
0.35
0.5
0.75
1
1.5
2
3
4
0.185
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
816
780
828
816
840
828
840
852
858
Cos
0.6
0.64
0.65
0.68
0.69
0.66
0.65
0.66
0.69
EFF
Mn
%
Nm
55
56
60
58
64
67
67
73
78
2.16
3.06
4.27
6.44
8.53
12.69
17.05
24.66
33.39
Mm/Mn
2.5
2.2
2.5
1.4
1.5
1.7
1.8
2.2
1.8
2.6
2.1
2.2
1.5
1.9
2.1
2.2
2.4
2.4
2.4
2.5
2.8
3.0
3.3
3.3
3.3
3.9
4.4
In(230V) In(460V)
Kg
A
1.41
1.75
2.38
3.50
4.26
6.24
8.65
11.46
13.99
0.70
0.88
1.19
1.75
2.13
3.12
4.32
5.73
7.00
“ THE METRIC MOTOR SPECIALISTS”
Please note: prices are subject to change without notice
45