LO PRO SUPPORT BEAM
Fully assembled, tested, and ready
to integrate into your system.
• Support beams are made to fit your custom built Lo Pro belt, chain, screw or pneumatic system.
• Support beams for Lo Pro belt and chain driven systems include rosette welded end plates for
extra support and rigidity.
• Beams are cut from heavy wall structural steel tubing that matches the load
handling capacity of each Lo Pro slide system.
• Beams are available with standard mounting options or with special
mounting configurations manufactured to your specifications. All
beams are finished with a 2-part epoxy paintable coating.
• Lo Pro support beams eliminate expensive
in-house engineering and shop fabrication
costs.
• Call the factory with your
BISHOP-WISECARVER CORPORATION
T H E F U T U R E O F L I N E A R M O T I O N . E S T. 1 9 5 0
2104 Martin Way, Pittsburg, CA 94565-5027
(925) 439-8272 • Fax (925) 439-5931
www.bwc.com
© 1999 Bishop-Wisecarver Corporation
needs. Shipment within
10 days on most
beam mounted
systems.
LO PRO SUPPORT BEAM
LARGE DRIVE END BELT SYSTEM
Drive ends secured to support tube
and plate by eight bolts
Rosette welded end support
for perfect alignment
Heavy steel support plate extends
into the tube for ridged attachment
ORDERING INFORMATION
Lo Pro Support Beam for Metric Systems
Lo Pro
Size #
Structural Steel Tube
Size/in.
Wall
Belt and Chain
Lbs./in.
Large Drive
End
Screw
Pneumatic
Basic
Small Drive
End
Drive
Drive
No Drive
2
3.0 x 3.0 0.120
0.38
M2ASMG
3
5.0 x 4.0 0.188
0.89
M3ASMG
4
6.0 x 4.0 0.250
1.30
M4ASMG
1
2.5 x 1.5 0.120
0.25
M1ASMM
M1ASMLS
M1ASMP
M1ASMB
2
3.0 x 1.5 0.120
0.29
M2ASMM
M2ASMLS
M2ASMP
M2ASMB
3
5.0 x 2.0 0.188
0.68
M3ASMLS
M3ASMP
M3ASMB
4
6.0 x 2.0 0.188
0.79
M4ASMLS
M4ASMP
M4ASMB
LO PRO MOTOR ADAPTERS
Available for NEMA motor frame sizes
23, 34 and 42.
BISHOP-WISECARVER CORPORATION
T H E F U T U R E O F L I N E A R M O T I O N . E S T. 1 9 5 0
2104 Martin Way, Pittsburg, CA 94565-5027
(925) 439-8272 • Fax (925) 439-5931
www.bwc.com
© 1999 Bishop-Wisecarver Corporation