Decorative Style Recessed Equipment
12-Volt, Maintenance-Free
Long-Life Lead Calcium Battery
Blending into any environment, the Phantom PM Series emergency lighting
unit goes unnoticed until it is needed. When AC power fails and the lights
go out, the Phantom PM unit emerges to illuminate the path to safety.
FEATURES
• RELIABILITY: The Phantom PM Series
has a three-year full warranty (excluding
lamps and pilot lights).
• CONSTRUCTION: Design combines ease
of installation for the contractor and
quality of finish for the architect or
designer. The lighting assembly features
a high quality, white finish. The heavyduty, galvanized steel back box has no
holes and a corrosion-resistant finish.
• MOUNTING: Recess mounts into walls
or ceiling
APPLICATIONS
BATTERY
The “unseen solution” for use in walls
or ceilings with a cavity. Ideally suited
for any interior application where
aesthetics are of importance.
Long-life, maintenance-free sealed lead
calcium.
UNIT SELECTION CHART
• ELECTRONICS:
- Automatic, temperature-compensated,
pulse-type charger
Self-Powered Fixtures
- High capacity, automatic, dust tight
instantaneous transfer relay
12PM54-2(12) ........................................12 watt heads (12-volt, 54 watts)
- Low voltage disconnect prevents over
discharge of battery. Automatic
brownout protection is provided.
- Fused output circuits
• CONTROLS:
- Internally illuminated test switch
• POWER REQUIREMENTS:
- 120/277 Volt AC
12PM36-2(12) ........................................12 watt heads (12-volt, 36 watts)
12PM54-2(20) ......................................20 watt heads* (12-volt, 54 watts)
12PM70-2(35) ........................................35 watt heads* (12-volt, 70 watts)
12PM100-2(50) ....................................50 watt heads* (12-volt, 100 watts)
*Do not exceed rated unit capacity.
Remote Fixtures (requires an external AC and DC source)
12PMR12-2 ..............................................(2 heads, 12-volt, 12 watts each)
24PMR12-2 ..............................................(2 heads, 24-volt, 12 watts each)
12PMR20-2 ..............................................(2 heads, 12-volt, 20 watts each)
24PMR20-2 ..............................................(2 heads, 24-volt, 20 watts each)
12PMR35-2 ..............................................(2 heads, 12-volt, 35 watts each)
24PMR35-2 ..............................................(2 heads, 24-volt, 35 watts each)
4
NEW!
PHANTOM PM Series
LAMP HEADS
DIMENSIONS
The unit includes MR16 lamps supported
by metallic swivels, with 100 degrees
of aiming.
Back Box
Ch.
Compartment
8-5/8"
ORDERING FORMAT
6-7/16"
**
12 PM 36 -2 (12)
➀ ➁ ➂ ➃ ➄
➀
➁
➂
➃
➄
12..............Voltage
PM ............Series
36..............Wattage
-2 ..............Number of Lamps Heads
(12) ..........Wattage of Lamps
Battery
Compartment
8"
3-1/2"
Charger & Battery Compartment
For use in walls or ceilings with a cavity, not for use
in block walls or solid ceilings.
** 23-3/4” for up to 12V 70W.
29” for 12V 100W.
p r ove
d •
ap
Custom colors and finishes available on request.
a
e
d
•
p
p r o v
CAL#44804
NRTL UL924
Dimensions are approximate and subject to change.
OPTIONS
ACCESSORIES
(Add suffix to Model No.)
Improved Diagnostics ........................................................-ID
5
(Order as separate item)
Remote Test Switch ..........................................................RTS
Decorative Style Recessed Equipment
6- and 12-Volt, Maintenance-Free, Lead Calcium
Long-Life Lead or Nickel Cadmium Batteries
The RD Series combines decorative styling, rugged construction and high
performance for fully recessed applications. Low profile, the RD Series
is unobtrusive, blends in well with any interior, and can be recessed
in ceilings or walls.
Also available in black.
FEATURES
• RELIABILITY: The RD Series has a
three-year full warranty (excluding lamps
and pilot lights).
APPLICATIONS
BATTERY
Ideal for use in applications that require
fully-recessed, architecturally-styled
units.
6- or 12-volt maintenance-free, sealed lead
calcium, long life lead or nickel cadmium.
• CONSTRUCTION: Construction of 20
gauge steel with an off-white baked
enamel finish.
• MOUNTING: Easily recesses into wall
or ceiling. Mounting brackets included
for installation in grid type suspended
ceilings. Bar hangers included. Furnished
with ELF-645 heads with 6- or 12-volt
lamps as specified.
• ELECTRONICS:
UNIT SELECTION CHART
Standard lamp is 6- or 12-volt, 12 watt
- Automatic, temperature-compensated,
pulse-type charger
- High capacity, automatic, dust tight
instantaneous transfer relay
- Low voltage disconnect prevents over
discharge of battery. Automatic
brown out protection
is provided.
- Labor saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
UNIT EQUIPMENT - WITH REMOTE CAPABILITY
Sealed
Maintenance-Free
Battery Types
D.C.
Voltage
Model Number
ELF-645
Lamps Heads
EF-150
Lamp Heads
*Watts to 87-1/2%
of rated battery voltage
11/2 hrs. 2 hrs. 3 hrs. 4 hrs.
∆
6
2RD6C2 **
2RD6C2-ELF2
25
18
12
9
∆
12
2RD12C3 **
2RD12C3-ELF2
36
21
15
12
∆
6
2RD6E2
2RD6E2-ELF2
27
19
14
10
∆
6
2RD6E3
2RD6E3-ELF2
36
24
17
13
∆
12
2RD12E3
2RD12E3-ELF2
36
24
17
13
∆
6
2RD6M2
2RD6M2-ELF2
27
18
14
10
∆
6
2RD6M3
2RD6M3-ELF2
36
25
20
14
∆
12
2RD12M3
2RD12M3-ELF2
36
25
20
14
Nickel Cadmium
Long Life Lead
Lead Calcium
*National Electrical Code Specification
** CSA NRTL UL924 Listed
6
∆ = Improved Diagnostics Available
NEW!
RD Series
LAMP HEADS
DIMENSIONS
Supplied with ELF-645 heads with 6- or 12-volt
lamps as specified.
Back Box
63/8"
ORDERING FORMAT
2 RD 12 C 3 -L9 -NY -TD
➀ ➁ ➂ ➃ ➄ ➅
➆ ➇
2................No. of Heads
RD ............Series
12..............DC Battery Backup
C................Battery Type Ni-cad
3................Capacity Indicator
-L9 ............Lamp Option Incandescent
-NY ............New York City Spec.
-TD ............Option Time Delay
41/2"
101/2"
Back Box
71/4"
p r ove
d •
ap
➀
➁
➂
➃
➄
➅
➆
➇
33/4"
•
111/2"
d
NRTL UL924
e
a
p
p r o v
CAL#32336
®
Listed
Dimensions are approximate and subject to change.
OPTIONS
ACCESSORIES
(Add suffix to Model No.)
Ammeter OR Voltmeter (choose only one) ................-A* or -V*
Improved Diagnostics ........................................................-ID
Time Delay ..................................................................-TD**
EF150 Lighting Heads ..................................................-EF150
Non-Standard Input Voltage ........................................Specify
*Not available with Diagnostics option
**Not required when using the ID option
7
(Order as separate item)
Wire Guard .................................................................. WG6
(ELF645 or EF150 heads)
27” Adjustable Bar Hangers ........................................ BH-RD
Decorative Style Recessed Equipment
6-Volt, Maintenance-Free, Lead Calcium Battery
605-M Series
The 605-M Series emergency luminaire is a classic high-hat style unit
with a gimbal-mounted lamp. The unit recesses fully into the ceiling,
leaving only the lens and trim visible.
FEATURES
• RELIABILITY: The 605-M Series has a
three-year full warranty (excluding lamps
and pilot lights).
APPLICATIONS
BATTERY
Ideally suited for low ceilings. Blends
inconspicuously with existing recessed
lighting schemes.
6-volt, maintenance-free sealed lead
calcium. Provides 90 minutes of
emergency illumination.
LAMP HEADS
ORDERING FORMAT
• CONSTRUCTION: All components are
contained in drawn steel back box.
Standard finish of trim is white.
• MOUNTING: Recess mounts into ceiling.
Series 605-M is UL-approved for use in
insulated ceilings.
Supplied with an 8 watt, high-intensity
halogen lamp. Gimbal ring has a horizontal
rotation of 358 degrees and a vertical angle
adjustable to 42 degrees.
• ELECTRONICS:
- Automatic, temperature-compensated,
pulse-type charger
- High capacity, automatic, dust-tight
instantaneous transfer relay
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
OPTIONS
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
(Add suffix to Model No.)
Black Housing and Gimbal ...................... -B
605 P1 /LH5 -R -M
➀ ➁
➂ ➃ ➄
➀
➁
➂
➃
➄
605............Series
P1..............Battery Type
and Capacity
/LH5 ..........Lamp Suffix
-R ..............Recessed
-M..............NYC-Approved Version
DIMENSIONS
• CONTROLS:
- Combination AC-ON/charge monitor LED
(Order as
separate item)
ACCESSORIES
- Momentary test switch allows for quick
operational check of entire system.
14" to 24"
7"
Remote Test Switch.............................. RTS
• POWER REQUIREMENTS:
- 120/277 Volt AC
d •
ap
10.25"
p r ove
d
•
®
e
a
p
p r o v
Listed
CAL#32654
UNIT SELECTION CHART
8.5"
Battery Type
Volts
Model No.
Capacity in Watts to 87-1/2%
Standard Lamps
of Nominal Battery Voltage
Watts
Type
Replace. No.
1-1/2 Hrs.
2 Hrs.
Lead Calcium
6 605P1/LH5-R-M
9
-
8
Halogen
580.0013
Long-Life Lead
6 605E1/LH5-R-M
9
-
8
Halogen
580.0013
Nickel Calcium
6 605C1/LH5-R-M
18
12
8
Halogen
580.0013
Long-Life Lead
6 605E2/LH5-R-M
18
11
8
Halogen
580.0013
7.75"
6.5"
Dimensions are approximate and subject to change.
8
Decorative Style Recessed Equipment, 6- and 12-Volt,
Maintenance-Free Lead Calcium or Nickel Cadmium Battery
TBR Series
The TBR Series is a fully-recessed ceiling unit designed for installation
into T-Bar type ceiling configurations. The unit’s sleek lines and full
recessing provide clean, aesthetically pleasing installations.
BATTERY
APPLICATIONS
FEATURES
Ideal for locations where there is limited wall
space and where the greater directional
flexibility of ceiling-mounted heads is needed
to provide a broader light distribution.
6- or 12-volt, long life, maintenance-free,
sealed lead calcium. Nickel cadmium
available on request.
ORDERING FORMAT
LAMP HEADS
2 TBR C
➀ ➁ ➂
➀
➁
➂
➃
➄
1 -V
➃ ➄
• RELIABILITY: The TBR Series has a
three-year full warranty (excluding lamps
and pilot lights).
• CONSTRUCTION: 18-gauge, fire-resistant
steel, finished in white enamel. Provision
for mounting up to three heads.
PAR 36 size, high-impact, mar-resistant white
thermoplastic heads, supplied with highintensity incandescent lamps. Tungsten
halogen lamps available as an option.
2................No. of Heads
TBR............Series
C................Battery Type
1................Capacity Indicator
-V ..............Option (Voltmeter)
• MOUNTING: Lay-in installation in T-bar grid
ceiling and secured with tie wires. Back box
has removable cover for ease of installation
and full access to battery and charger.
• ELECTRONICS:
- Automatic, temperature compensated,
pulse type charger.
- High capacity, automatic, dust tight
instantaneous transfer relay.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
(Add suffix to Model No.)
- Labor saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Fused output circuit.
p r ove
d •
• CONTROLS:
d
•
p
®
e
a
Black Housing and Heads ...................... -B
Voltmeter.............................................. -V
Time Delay (12 min.)* .......................... TD
Improved Diagnostics............................ -ID
Improved Diagnostics (non-audible) .. -IDNA
Nickel Cadmium Battery ........................ -N
ap
OPTIONS
p r o v
- Red charge monitor LED indicates state
of charge of the battery.
Listed
CAL#32653
- Orange AC-ON LED indicates AC power is on.
- Momentary test switch allows for quick
operational check of entire system.
• POWER REQUIREMENTS:
- 120/277 Volt AC
DIMENSIONS
UNIT SELECTION CHART
23 3/4”
3 1/4”
7”
Model No.
Volts
(Unit/Lamp
Suffix)
2TBRC1/L9
6
13”
12
Capacity in Watts to 87-1/2%
Standard Lamps
of Nominal Battery Voltage
Lamp
Watts
/
Head
Type
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs.
Replace. No.
27
20
14
10
9
Incand.
570.0016
2TBRC2/L9
54
36
25
18
9
Incand.
570.0016
2TBRC3/L9
81
48
33
24
9
Incand.
570.0016
2T12BRC2/L25
54
36
25
18
25
Incand.
570.0031
Dimensions are approximate
and subject to change.
9
Decorative Style Recessed Equipment, 6-Volt,
Maintenance-Free, Lead Calcium or Nickel Cadmium Battery
RSQ Series
The RSQ Series is a clean, contemporary-styled unit that recesses fully into
T-Bar and exposed Z-spline ceilings, providing non-obtrusive emergency
lighting in any institutional or commercial environment.
FEATURES
• RELIABILITY: The RSQ Series has a
three-year full warranty (excluding lamps
and pilot lights).
APPLICATIONS
BATTERY
For institutional and commercial environments where aesthetics are important
and directional lighting is not critical.
6 volt, maintenance-free sealed lead or
nickel cadmium. Provides 90 minutes of
emergency illumination.
LAMP HEADS
ORDERING FORMAT
• HOUSING 20 gauge fire-resistant steel
with frame and trim finished in white
enamel. Clear prismatic lens.
• MOUNTING: Fully recesses into T-bar or
exposed Z-spline ceilings. Mounting
brackets are included. Supporting bars or
rods are supplied by others. Series RSQ is
UL approved for use in insulated ceilings.
RSQ G -NY
➀ ➁ ➂
Furnished with one high efficiency tungsten
halogen lamp. Provides anon-directional,
even light distribution.
• ELECTRONICS:
➀
➁
➂
- Automatic, temperature-compensated,
pulse-type charger
- High capacity, automatic, dust-tight
instantaneous transfer relay
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Low voltage disconnect prevents overdischarge of battery. Automatic brownout
protection is provided.
RSQ............Series
G ..............Battery Type
-NY ............NYC-Approved Version
(Order as
separate item)
OPTIONS
ACCESSORIES
Voltmeter.............................................. -V
Two Lamps ............................................ -2
Remote Test Switch.............................. RTS
Guard ............................................ WG-11
• CONTROLS:
- Combination AC-ON/charge monitor LED
p r ove
d •
ap
- Momentary test switch allows for quick
operational check of entire system.
•
d
• POWER REQUIREMENTS:
- 120/277 Volt AC
®
e
a
p
p r o v
Listed
CAL#32333
DIMENSIONS
UNIT SELECTION CHART
No remote capability
Volts
6
6
Capacity in Watts to 87-1/2%
of Nominal Battery Voltage
1-1/2 Hrs.
2 Hrs.
RSQG-NY Sealed Lead
10
Sealed
Nick.
RSQN-NY
10
Cad.
Model
No.
Battery
8-11/16 in.
Standard Lamps
Watts
Type
Replace. No.
10
Halogen
580.0017
10
Halogen
580.0017
9-7/8 in.
With remote capability
6
6
RSQG-D-NY Sealed Lead
Nick.
RSQN-D-NY Sealed
Cad.
3-3/8 in.
24
18
2x6
Halogen
580.0012
24
18
2x6
Halogen
580.0012
Dimensions are approximate and subject to change
10
Industrial/Commercial Unit Equipment, 6- or 12-Volt,
Maintenance-Free, Lead Calcium Battery
PQ, P12Q Series
The PQ, P12Q Series is a traditionally styled battery unit with high capacity,
maintenance-free batteries — the perfect combination of function and
performance for most industrial and commercial environments.
BATTERY
APPLICATIONS
Industrial, institutional and commercial
environments where remote capability or
extended operating times are required.
FEATURES
6- or 12-volt, long life, maintenance-free
sealed lead calcium.
• RELIABILITY: The PQ, P12Q Series has a
three-year full warranty (excluding lamps and
pilot lights).
• HOUSING: Heavy duty steel case with front
access panel has mist white enamel finish.
ORDERING FORMAT
LAMP HEADS
2 PQ 2 /L25 -M -V
➀ ➁ ➂ ➃ ➄ ➅
➀
➁
➂
➃
➄
➅
2................No. of Heads
PQ..............Series
2................Capacity Indicator
/L25 ..........Lamp Suffix
-M..............Mist White Finish
-V ..............Option (Voltmeter)
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps. Heads can
be top or side mounted and easily moved
to either location by contractor without
location by contractor without rewiring.
- Automatic, temperature compensated,
pulse type charger.
- High capacity, automatic, dust tight
instantaneous transfer relay.
Note: Tungsten halogen lamps optional. See unit
selection chart.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
- Labor saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
(Order as
separate item)
ACCESSORIES
OPTIONS
• ELECTRONICS:
- Fused output circuit.
Mounting Platform ........................ MP-PQB
Wire Guard........................................ WG3
3-Wire Cord & Plug.............................. 3CP
3-Wire Cord & Plug (277V) ............ 3CP-277
- Momentary test switch allows for quick
operational check of entire system.
p r ove
d •
d
• POWER REQUIREMENTS:
®
e
a
p
p r o v
CAL#32651
DIMENSIONS
- Red charge monitor LED indicates state
of charge of the battery.
•
*Available with either Voltmeter or Ammeter - not both.
• CONTROLS:
- Orange AC-ON LED indicates AC power is on.
ap
Black Housing and Heads........................ -B
Voltmeter............................................ -V*
Ammeter ............................................ -A*
Improved Diagnostics............................ -ID
Improved Diagnostics (non-audible) .. -IDNA
Time delay (12 min.)............................ -TD
Tamper Proof ...................................... -TP
- 120/277 Volt AC
Listed
UNIT SELECTION CHART
*At Additional Cost
Model No.
D
B
A
MODEL
PQ2/L25
P12Q1/L25
P12Q2/L25
A
16”
C
B
C
D
10-1/4” 5-3/8”
16”
16-1/2” 12-1/4” 7-1/4”
18”
Dimensions are approximate and subject to change
Volts
(Unit/Lamp
Suffix)
6
2PQ2/L25-M
2P12Q1/L25-M
2P12Q2/L25-M
12
Capacity in Watts to 87-1/2%
of Nominal Battery Voltage
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs.
Standard Lamps
Watts /Head
Type
Lamp
Replace. No.
Incand.
Incand.
Incand.
570.0038
570.0031
570.0031
100
100
200
75
75
150
50
50
100
36
36
72
25
25
25
2PQ2/LH6-M 100
2P12Q1/LH3-M 100
2P12Q2/LH3-M 200
75
75
150
50
50
100
36
36
72
12
12
12
Operational Lamps*
6
12
11
Incand.
Incand.
Incand.
580.0011
580.0015
580.0015
Industrial/Commercial Unit Equipment
6- or 12-Volt, Maintenance-Free Lead Calcium Battery
The PG, P12G Series is a traditionally-styled, multi-purpose emergency
lighting unit that offers reliability, versatility, performance and costefficiency in an aesthetically-pleasing design.
FEATURES
• RELIABILITY: The PG, P12G Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING: Heavy-duty steel case with
front access panel and mist white
enamel finish.
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
APPLICATIONS
BATTERY
Designed to meet most requirements for
moderate loads, the PG, P12G series is
a reliable, economical choice for most
public areas.
6- or 12-volt, maintenance-free sealed
lead calcium.
Provides 90 minutes of emergency
illumination.
• ELECTRONICS:
- Automatic, temperature-compensated,
pulse-type charger
- High capacity, automatic, dust tight
instantaneous transfer relay
UNIT SELECTION CHART
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Low voltage disconnect prevents over
discharge of battery. Automatic
brownout protection is provided.
- Fused output circuits (PG2, P12G1).
Volts
Number
of Heads
Model
Number
6
12
12
2
2
3
2PG1-NY-M
2P12G1-NY-M
3P12G1-NY-M
• CONTROLS:
- Red charger monitor LED indicates
state of charge of the battery.
- Orange AC-ON LED indicates AC power
is on.
- Momentary test switch allows for quick
operational check of entire system.
• POWER REQUIREMENTS:
- 120/277 Volt AC, 0.25A, 30W (max.)
12
PG, P12G Series
LAMP HEADS
DIMENSIONS
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps. Heads can be
top or side mounted and easily moved to
either location by contractor without rewiring.
101/2”
161/2”
ORDERING FORMAT
2 PG1 -NY -M -SD
➀ ➁ ➂ ➃ ➄
32/3”
Dimensions are approximate and subject to change.
2................Number of Heads
PG1............Series
-NY ............NYC-Approved Version
-M..............Mist White Color
-SD ............Option (Self-Diagnostics)
p r ove
d •
ap
➀
➁
➂
➃
➄
13”
a
e
d
•
p
p r o v
CAL#32651
OPTIONS
ACCESSORIES
(Add suffix to Model No.)
Black Housing and Heads .................................................. -B
Voltmeter ...................................................................... -V*
Disconnect Switch .......................................................... -DS
Improved Diagnostics ...................................................... -ID
Improved Diagnostics (non-audible) .............................. -IDNA
Self-Diagnostics .............................................................. -SD
Time Delay ................................................................ -TD**
Tamper Proof .................................................................. -TP
3-Wire Cord and Plug .................................................... -3CP
3-Wire Cord and Plug (277V).................................... -3CP-277
*Not available with diagnostics.
**Not required with the diagnostics option.
13
®
Listed
(Order as separate item)
Guard .......................................................................... WG2
Mount Platform ........................................................ MP-PQA
Industrial/Commercial Unit Equipment 6- or 12-Volt,
Maintenance-Free, Nickel Cadmium Battery
PN, P12N Series
The PN, P12N Series is a traditionally styled, high performance unit. Long-life
nickel cadmium batteries are maintenance-free and especially suited for
environments where lighting units may be exposed to fluctuations in temperature.
FEATURES
• RELIABILITY: The PN, P12N Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING: Heavy duty steel case with
front access panel and mist white enamel
finish.
APPLICATIONS
BATTERY
Appropriate unit for any installation, where
the long life and maintenance-free features
of the sealed nickel cadmium battery are
required. Nickel cadmium batteries outperform lead acid batteries in dramatic
ambient temperature fluctuations.
6- or 12-volt, long life, maintenance-free
sealed nickel cadmium.
ORDERING FORMAT
LAMP HEADS
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps. Heads can
be top or side mounted and easily moved
to either location by contractor without
rewiring.
- High capacity, automatic, dust-tight
instantaneous transfer relay
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
- Fused output circuit.
• CONTROLS:
Note: Tungsten halogen lamps optional.
See unit selection chart.
➀
➁
➂
➃
➄
➅
OPTIONS
ACCESSORIES
(Add suffix to Model No.)
• POWER REQUIREMENTS:
*Not available with diagnostics.
- 120/277 Volt AC
a
- Momentary test switch allows for quick
operational check of entire system.
p r ove
d •
- Orange AC-ON LED indicates AC power
is on.
Mounting Platform ........................ MP-PQA
Guard .............................................. WG-2
•
Black Housing and Heads........................ -B
Voltmeter............................................ -V*
Ammeter .............................................. -A
Disconnect Switch................................ -DS
Improved Diagnostics (non-audible) ......-IDNA
Time Delay (12 min.) ............................-TD
Tamper Proof ...................................... -TP
3-Wire Cord and Plug.......................... -3CP
3-Wire Cord and Plug (277V) ........ -3CP-277
- Red charger monitor LED indicates
state of charge of the battery.
(Order as
separate item)
d
- Automatic, temperature-compensated,
pulse-type charger
2 P12N 2 /L12 -M -V
➀
➁
➂ ➃ ➄ ➅
2................Number of Heads
P12N..........Series
2................Capacity Indicator
/L12 ..........Lamp Suffix
-M..............Mist White Finish
-V ..............Option (Voltmeter)
ap
• ELECTRONICS:
p
®
e
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
p r o v
Listed
CAL#34481
DIMENSIONS
UNIT SELECTION CHART
*At Additional Cost
Model No.
Capacity in Watts to 87-1/2%
of Nominal Battery Voltage
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs.
C
Standard Lamps
Volts
(Unit/Lamp
Suffix)
Watts /Head
Type
Lamp
Replace. No.
6
2PN1/L9-M
2P12N1/L12-M
2P12N2/L12-M
25
50
72
20
36
60
14
25
50
10
18
36
9
12
12
Incand.
Incand.
Incand.
570.0016
570.0028
570.0028
2PN1/LH6-M
2P12N1/LH3-M
2P12N2/LH3-M
25
50
72
20
36
60
14
25
50
10
18
36
12
12
12
12
Operational Lamps*
6
12
Incand.
Incand.
Incand.
14
580.0011
580.0015
580.0015
A
Cabinet
A
B
A
13”
16-1/8”
B
B
3-2/3”
5-1/2”
C
10-1/2”
10-1/2”
Dimensions are approximate and subject to change
Industrial/Commercial Unit Equipment
6- or 12-Volt, Lead Acid Battery
SL, S12L Series
The SL, S12L Series features conventional styling in a high
capacity, lead acid battery unit that delivers extended
illumination times and a 10-year battery warranty.
BATTERY
APPLICATIONS
Ideal for all industrial, commercial and
institutional environments requiring
extended illumination time, high capacity
and remote capability. Battery has 10-year
life expectancy (3-yrs full, 7-yrs pro-rata)
FEATURES
6- or 12-volt long life lead acid battery in
transparent plastic containers with visible
gravity indicator.
• RELIABILITY: The SL, S12L Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING: Heavy duty steel case with front
access panel has mist white enamel finish.
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
ORDERING FORMAT
LAMP HEADS
2
➀
➀
➁
➂
➃
➄
➅
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps.
• ELECTRONICS:
ACCESSORIES
- Labor saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
(Order as
separate item)
Mounting Platform ............................MP-A
Mounting Bracket (6-Volt models only) ......MB-A
Guard (Model SL) .................................. WG3
Guard (Model S12L) ................................ WG4
- Two separately fused output circuits.
• CONTROLS:
- Red charge monitor LED indicates state
of charge of the battery.
- Orange AC-ON LED indicates AC power
is on.
p r ove
d •
- Momentary test switch allows for quick
operational check of entire system.
d
•
a
Voltmeter.............................................. -V
Ammeter .............................................. -A
Disconnect Switch................................ -DS
Time Delay (12 min.) .......................... -TD
3-wire Cord & Plug ............................ -3CP
3-wire Cord & Plug (277V)............ -3CP-277
- High capacity, automatic, dust tight
instantaneous transfer relay.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
p
®
e
OPTIONS
(Add suffix to Model No.)
- Automatic, temperature compensated,
pulse type charger.
Note: Optional lamps available.
ap
S12L 9 /L25 -G -V
➁
➂
➃
➄
➅
2................Number of Heads
S12L ..........Series
9................Capacity Indicator
/L25 ..........Lamp Suffix
-G ..............Gray Enamel Finish
-V ..............Option (Voltmeter)
p r o v
• POWER REQUIREMENTS:
Listed
CAL#21556
and 21050
- 120/277 Volt AC
DIMENSIONS
UNIT SELECTION CHART
D
Model No.
B
Volts Cabinet
A
Cabinet
A
B
C
16-1/2” 12-1/4”
D
27”
12-1/4”
C
C
7-1/4”
7-1/4”
D
16-1/4”
18-1/4”
Dimensions are approximate and subject to change
6
12
C
C
C
D
D
(Unit/Lamp
Suffix)
25L3/L25-G
25L9/L25-G
25L105/L25-G
2512L9/L25-G
2512L105/L25-G
15
Capacity in Watts to 87-1/2%
Standard Lamps
of Nominal Battery Voltage
Lamp
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs. Watts/Head Type Replace. No.
100
200
200
350
400
80
150
200
300
400
50
125
175
250
300
40
100
125
200
250
25
25
25
25
25
Incand.
Incand.
Incand.
Incand.
Incand.
570.0038
570.0038
570.0038
570.0031
570.0031
Industrial/Commercial Unit Equipment
6- or 12-Volt, Nickel Cadmium Battery
SN/S12N Series
The SN, S12N Series offer the highest and widest in capacity as well as the
highest battery reliability. Able to withstand temperature fluctuations and
provide extended illumination times, these units can also be connected
to remote heads or exits.
FEATURES
• RELIABILITY: The SN, S12N Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING: Heavy duty steel case with
front access panel and gray enamel finish.
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
Mounting platform or bracket available.
APPLICATIONS
BATTERY
Excellent high capacity units ideal where
extended burn times may be required,
and/or remote fixtures or exits will be
connected. Unit offers special advantages
of the long life nickel cadmium battery
including excellent recharging capability,
and superior performance over extended
temperature ranges. 13-year battery
warranty (3-yrs full, 10-yrs pro-rata).
6- or 12-volt high performance nickel
cadmium battery in translucent plastic
cells with expected life of 13 years.
ORDERING FORMAT
2 SN 4 /L25 -G -V
➀ ➁ ➂ ➃ ➄ ➅
• ELECTRONICS:
LAMP HEADS
- High capacity, automatic, dust-tight
instantaneous transfer relay
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps.
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
Note: Optional lamps available.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
OPTIONS
- Two separately fused output circuits.
• CONTROLS:
- Red charger monitor LED indicates state
of charge of the battery.
- Orange AC-ON LED indicates AC power is on.
- Momentary test switch allows for quick
operational check of entire system.
(Add suffix to Model No.)
2................Number of Heads
SN ............Series
4................Capacity Indicator
/L25 ..........Lamp Suffix
-G ..............Mist White Finish
-V ..............Option (Voltmeter)
Guard (Model SN) .............................. WG3
Guard (Model S12N)............................ WG4
Mounting Platform (Model SN)............ MP-A
Mounting Platform (Model S12N) ...... MP-12
Mounting Bracket (Model SN only)...... MB-A
6
12
C
C
C
C
C
D
D
D
D
D
2SN2/L25G
2SN3/L25G
2SN4/L25G
2SN6/L25G
2SN7/L25G
2S12N2/L25G
2S12N3/L25G
2S12N4/L25G
2S12N6/L25G
2S12N7/L25G
d
p r o v
Listed
CAL #21556
and 21050
DIMENSIONS
UNIT SELECTION CHART
(Unit/Lamp
Suffix)
®
e
a
p
- 120/277 Volt AC
Model No.
p r ove
•
• POWER REQUIREMENTS:
Volts Cabinet
(Order as
separate item)
ACCESSORIES
d •
Voltmeter.............................................. -V
Ammeter .............................................. -A
Disconnect Switch................................ -DS
Time Delay (12 min.) .......................... -TD
Thermal Jacket (120V) (Model SN only) -H1
Thermal Jacket (277V) (Model SN only) -H2
3-wire Cord & Plug ............................ -3CP
3-wire Cord & Plug (277V)............ -3CP-277
➀
➁
➂
➃
➄
➅
ap
- Automatic, temperature-compensated,
pulse-type charger
Capacity in Watts to 87-1/2%
Standard Lamps
of Nominal Battery Voltage
Lamp
Watts/Head
Type Replace.
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs.
No.
50
70
100
130
160
100
140
200
260
320
45
60
80
105
130
90
130
166
210
278
25
35
50
70
80
64
90
120
150
200
18
25
35
50
60
50
70
90
112
150
25
25
25
25
25
25
25
25
25
25
Incand.
Incand.
Incand.
Incand.
Incand.
Incand.
Incand.
Incand.
Incand.
Incand.
16
570.0038
570.0038
570.0038
570.0038
570.0038
570.0031
570.0031
570.0031
570.0031
570.0031
D
B
C
A
C
D
A
161/2”
27”
B
121/4”
121/4”
C
71/4”
71/4”
D
161/4”
181/4”
Dimensions are approximate and subject to change.
Industrial/Commercial Unit Equipment
12-Volt, Maintenance-Free, Lead Calcium Battery
S12E Series
The S12E Series offers high performance, reliability and flexibility.
Its high capacity, maintenance-free battery offers extended illumination
and multiple remote capability.
BATTERY
APPLICATIONS
Designed for applications requiring highcapacity, maintenance-free batteries, multiple
remote capability or extended operating
times. The 12-volt battery allows for longer
remote wiring runs without voltage drop.
- Automatic, temperature compensated,
pulse type charger.
- High capacity, automatic, dust tight
instantaneous transfer relay.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
(Order as
separate item)
ACCESSORIES
Guard (S12E4) .................................. WG3
Guard (S12E 5/6) .............................. WG4
Mounting Platform (S12E4)................ MP-A
Mounting Platform (S12E5/6) .......... MP-12
Mounting Bracket (S12E4) ................ MB-A
- Labor saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Two separately fused output circuits.
• CONTROLS:
- Red charge monitor LED indicates state
of charge of the battery.
- Orange AC-ON LED indicates AC power is on.
- Momentary test switch allows for quick
operational check of entire system.
p r ove
d •
•
a
p
®
p r o v
• POWER REQUIREMENTS:
Listed
CAL #23832
- 120/277 Volt AC
UNIT SELECTION CHART
Model No.
Volts
D
B
12
A
Capacity in Watts to 87-1/2%
of Nominal Battery Voltage
1-1/2Hrs. 2 Hrs. 3 Hrs. 4 Hrs.
(Unit/Lamp
Suffix)
2S12E4/L25-G
2S12E5/L25-G
2S12E6/L25-G
200
300
400
D
181/4”
181/4”
p r ove
d •
C
71/4”
71/4”
ap
C
B
121/4”
121/4”
• ELECTRONICS:
d
(Add suffix to Model No.)
DIMENSIONS
A
161/2”
27”
• MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
Mounting platform or bracket available.
Note: Optional lamps available.
e
2................Number of Heads
S12E ..........Series
4................Capacity Indicator
/L25 ..........Lamp Suffix
-G ..............Gray Enamel Finish
-V ..............Option (Voltmeter)
-A ..............Option (Ammeter)
Voltmeter (Not available with diagnostics).......... -V
Ammeter (Not available with diagnostics) .......... -A
Disconnect Switch................................ -DS
Time Delay (12 min.) .............................. -TD
Improved Diagnostics .......................... -ID*
(*S12E4 only)
3-wire Cord & Plug ..............................-3CP
3-wire Cord & Plug (277V) ............-3CP-277
C
D
• HOUSING: Heavy duty steel case with
front access panel and gray enamel finish.
PAR 36 size, high impact mar-resistant
thermoplastic heads, furnished with high
intensity incandescent lamps.
ap
2 S12E 4 /L25 -G -V -A
➀ ➁ ➂ ➃ ➄ ➅ ➆
OPTIONS
12-volt maintenance-free sealed lead
calcium. Battery warranty: 6-yr warranty
(3 yrs full, 3-yrs pro-rata).
LAMP HEADS
ORDERING FORMAT
➀
➁
➂
➃
➄
➅
➆
FEATURES
• RELIABILITY: The S12E Series has a
three-year full warranty (excluding lamps
and pilot lights).
d
•
p
®
e
a
Dimensions are approximate and subject to change.
p r o v
Listed
CAL#23832
17
150
225
300
107
165
214
85
127
170
Cabinet
C
D
D
Standard Lamps
Lamp
Watts
Type Replace.
No.
/ Head
25
25
25
Incand.
Incand.
Incand.
570.0031
570.0031
570.0031
Corrosion-Resistant Emergency Lighting, 6- or 12-Volt,
Maintenance-Free, Lead Calcium Battery
FG, F12G Series
The FG, F12G Series of emergency lighting units meet NEMA 4X and 12
requirements for harsh environment installations where corrosion
resistance is necessary.
FEATURES
• RELIABILITY: The FG, F12G Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING: Molded gray polycarbonate case
features oil, water and dust-tight construction,
stainless steel hardware, single piece neoprene
gasket and vented battery compartment.
• MOUNTING: External mounting feet are
provided. Conduit entry may be cut with
a punch, drill or hole saw.
APPLICATIONS
BATTERY
Designed for industrial applications in
hazardous locations, especially for
installations in a corrosive atmosphere.
6- or 12-volt long life, maintenance-free
sealed lead calcium. Battery warranty:
6-yr warranty (3 yrs full, 3-yrs pro-rata).
LAMP HEADS
ORDERING FORMAT
2 FG 1 /4510
➀ ➁ ➂
➃
Standard size, high impact, mar-resistant
thermoplastic heads, furnished with PAR36
sealed beam lamps.
• ELECTRONICS:
- Automatic, temperature-compensated,
pulse-type charger
➀
➁
➂
➃
- High capacity, automatic, dust-tight
instantaneous transfer relay
- Labor-saving AC line latch prevents
battery discharge during installation
to a non-energized circuit.
- Low voltage disconnect prevents
overdischarge of battery. Automatic
brownout protection is provided.
OPTIONS
• CONTROLS:
- Red charger monitor LED indicates state
of charge of the battery.
- Orange AC-ON LED indicates AC power is on.
(Add suffix to Model No.)
Improved Diagnostics............................ -ID
Improved Diagnostics (non-audible) .. -IDNA
Time Delay (12 min.) .......................... -TD
Thermal Jacket 120V............................ -H1
Thermal Jacket 277V............................ -H2
ACCESSORIES
ap
3-Wire Cord & Plug (120V).............. WP-3CP
3-Wire Cord & Plug (277V) ...... WP-3CP-277
Guard................................................ WG3
p r ove
a
• POWER REQUIREMENTS:
- 120/277 Volt AC
e
d
•
p
p r o v
CAL#30814
®
Listed
DIMENSIONS
UNIT SELECTION CHART
11 in.
Model No.
Volts
6
12
(Unit/Lamp
Suffix)
2FG1/4510
2FG1/4510
2F12G1/4446
2F12G2/4446
Capacity in Watts to 87-1/2%
of Nominal Battery Voltage
1-1/2 Hrs. 2 Hrs.
3 Hrs.
50
100
50
100
36
75
36
75
(Order as
separate item)
d •
- Momentary test switch allows for quick
operational check of entire system.
2................Number of Heads
FG..............Series
1................Capacity Indicator
/4510 ........Lamp Suffix
25
50
25
50
10 in.
Standard Lamps
Watts /Head
Type
Lamp
Replace. No.
25
25
25
25
Incand.
Incand.
Incand.
Incand.
550.0017
550.0017
550.0023
550.0023
13-1/2 in.
5 in.
Dimensions are approximate and subject to change.
18
Self-Powered Fluorescent Fixture
Sealed Nickel Cadmium Battery
FF-AM Series
The FF-AM Series is a tamper- and vandalproof fluorescent fixture that
combines the functions of normal area lighting and emergency lighting
in one fixture.
BATTERY
APPLICATIONS
FEATURES
Ideal for areas such as stairwells, halls and
bathrooms where an easily installed,
tamperproof, dual-purpose fixture is
required.
Long life, maintenance-free sealed nickel
cadmium. Battery warranty: 5-yr Battery
Warranty (1-yr full, 4-yrs pro-rata)
ORDERING FORMAT
LAMP HEADS
FF-AM
➀
➀
➁
➂
➃
1 20
➁ ➂
120V
➃
FF-AM ........Series
1................No. of Lamp Sockets
20..............Wattage of Lamps
120V..........Voltage of Fixture
Available with sockets for: one (1) 20
watt, one (1) 40 watt, two (2) 20 watt or
two (2) 40 watt fluorescent lamps.
Lamps supplied by other.
• RELIABILITY: The FF-AM Series has a
three-year full warranty (excluding lamps
and pilot lights).
• HOUSING:
- Housing is constructed of 16 gauge steel
and secured with tamper-proof screws.
Tamper-proof screw driver is included.
- Completely self-contained and
maintenance-free.
- Provided with high-impact
polycarbonate lens.
- Surface mounting.
• BATTERY PACK:
High efficiency battery pack, complete
with inverter charger and battery provides
emergency power to one lamp in fixture for
90 minutes.
• ELECTRONICS:
• CONTROLS:
- Pilot light and test switch.
p r ove
d •
ap
- Fully automatic solid-state charger.
- Low voltage disconnect prevents
overdischarge of battery.
d
•
®
e
a
p
p r o v
Listed
CAL#32027
DIMENSIONS
• POWER REQUIREMENTS:
- Battery pack is dual voltage 120/277 volt
AC input supply. Voltage for fluorescent
fixture must be specified 120 or 277V and
is indicated by complete model number.
UNIT SELECTION CHART
MODEL
FF-AM-1-20-120V
FF-AM-1-20-277V
FF-AM-2-20-120V
FF-AM-2-20-277V
FF-AM-1-40-120V
FF-AM-1-40-277V
FF-AM-2-40-120V
FF-AM-2-40-277V
C
A
B
Dimensions are approximate and subject to change.
19
A
B
C
24-1/2” 4-1/2”
4-1/2”
48-1/2” 4-1/2”
4-1/2”
Industrial/Commercial Unit Equipment
Combination 12-Volt Emergency Light and 8-in. Exit Sign
The P12G8XJ Series was designed and manufactured specifically to meet
New York City’s local code requirements for places of public assembly.
This series combines 12-volt, 2- or 3-head emergency lighting with an
8-inch, self-powered exit sign in one compact, easy-to-install unit.
FEATURES
• RELIABILITY: The P12G8XJ Series has a
three-year full warranty (excluding lamps
and pilot lights).
APPLICATIONS
BATTERY
Approved for use in any place of public
assembly. Exit sign is illuminated during
normal AC operation. In the event of a
power failure, unit will automatically
illuminate exit sign and lamp heads for
a minimum of 90 minutes.
12-volt, maintenance-free sealed
lead calcium. Provides 90 minutes
of emergency illumination.
• HOUSING:
- Power unit has heavy duty steel case
with mist white enamel finish.
- Exit sign has a mist white enamel finish.
Stencil face has 8 in. high letters and
universal knock out chevrons.
- Exit sign can be either back or end
mounted to power unit - all hardware
is included. Available with either
single or double face sign.
- MOUNTING: Conduit knockouts and rear
keyhole mounting slots are provided.
• ELECTRONICS:
- Automatic, temperature-compensated,
pulse-type charger
- High capacity, automatic, dust tight
instantaneous transfer relay
UNIT SELECTION CHART
Model
Number
2P12G8XJ-NY-M
2P12G82XJ-NY-M
3P12G8XJ-NY-M
3P12G82XJ-NY-M
- Labor-saving AC line latch prevents
battery discharge during installation to
a non-energized circuit.
- Low voltage disconnect prevents over
discharge of battery. Automatic brownout
protection is provided.
- Fused output circuits.
• CONTROLS:
- Red charger monitor LED indicates state
of charge of the battery.
- Orange AC-ON LED indicates AC power
is on.
- Momentary test switch allows for quick
operational check of entire system.
• POWER REQUIREMENTS:
- 120/277 Volt AC
20
Number
of Mounted
Lamp Heads
2
2
3
3
Number of
Exit Faces
1
2
1
2
P12G8XJ Series
LAMP HEADS
DIMENSIONS
Par 36 size, high impact mar-resistant
thermo-plastic heads, furnished with high
intensity lamps. Exit sign is supplied with
two 15T6 incandescent lamps angled to
provide uniform illumination when normal
power is present.
When normal power fails, battery illuminates
three 12 volt lamps in exit sign along with
the lamp heads.
16-3/8 in.
Option: Exit sign may be supplied with two energy-saving
7 watt PL type fluorescent lamps for normal illumination.
14-3/8 in.
9-7/8 in.
ORDERING FORMAT
15-1/16 in.
5-3/8 in.
2 P12G8XJ -NY -M -SD
➀
➁
➂ ➃ ➄
➀
➁
➂
➃
➄
2................Number of Heads
P12G8XJ ....Series
-NY ............NYC-Approved Version
-M..............Mist White Color
-SD ............Option (Self-Diagnostics)
p r ove
d •
ap
18-5/16 in.
a
e
d
•
p
p r o v
CAL#32651,
#31687
OPTIONS
®
Dimensions are approximate and subject to change.
Listed
(Add suffix to Model No.)
Two 7 watt PL Type Fluorescent Lamps in Exit.................... -FL
Self-Diagnostics .............................................................. -SD
Improved Diagnostics ...................................................... -ID
21