AMPHIONTM Solid State Circuit Breakers

advertisement
AMPHION
Solid State Circuit Breakers
TM
DESCRIPTION
AMETEK’s AMPHION MS3320 sized Solid State Circuit Breakers (SSCB) combine
circuit breaker, load monitoring and relay functions in a small and cost-effective
package. The SSCB can be used directly in an application circuit
or combined with other AMPHION components into a power
distribution system.
MANUAL AND AUTOMATIC
OPERATION
The SSCB has a manual actuator that functions similarly to that of an electromechanical
circuit breaker, but it also has a one-wire digital data bus that allows for remote operation
FEATURES
and the measurement of voltage, current, and status.
Arc fault protection
ARC FAULT PROTECTION
Manual or automatic
actuation/reset
The circuit breaker has the ability to detect and trip on intermittent arc faults produced by
wire insulation failure.
Input voltage range 10 to
36 VDC
UNIQUE FAILSAFE DESIGN
Unlike other solid-state products, the SSCB contains patented circuitry that prevents a
failure in a short-circuited condition. This means that a failure will not cause a critical load
Fail open design (patent
pending)
Programmable power-on
defaults
to remain powered in an unprotected and uncontrolled manner.
APPLICATIONS
Remote / manual control of electrical loads, such as pumps, valves, lights, actuators, fans,
etc. Protect wiring harnesses and loads from fire due to wire shorts or insulation failures.
Monitors load operation and health.
Voltage, current and
status monitoring via an
integral serial data port
Multiple current ranges
available from 0.5 to 20A
SPECIFICATIONS
Operating Temperature Range: -49O to 185OF (-45O to 85OC)
DO-160D testing
Storage Temperature Range: -76O to 284OF (60O to 140OC)
Less than 10°C
temperature rise at full
power operation
Sales
Tel: 978-988-4771 • Fax: 978-988-4944
www.ametekaerospace.com • E-mail: aerosales@ametek.com
AEROSPACE & DEFENSE
www.ametekaerospace.com
Distribution and Repair
HEADQUARTERS
50 Fordham Road • Wilmington MA 01887 U.S.A.
PRINTED IN THE U.S.A.
Tel: 978-988-4100 • Fax: 978-988-4720
www.ametekaerospace.com/service.asp
©2005, BY AMETEK, INC. ALL RIGHTS RESERVED.
1M105CW (020100)
Download