LED EXIT SIGN W/BATTERY BACKUP
SINGLE/DOUBLE FACE
(E-XPD SERIES)
Applications: For general purpose exit identification and emergency lighting in indoor commercial, retail, or industrial applications.
4-5/8"
5-7/8"
7-1/4"
11-13/16"
1"
Red Letters
Green Letters
Canopy
1-13/16"
Letters on sign face are 6" high
Catalog #
Description
Input
Voltage
Ambient
Temperature
Rating
Weight
Energy Consumption
E-XPDRBW
Single/double face:
LED Exit sign w/battery backup
(Red letters)
120- or 277-volt
50˚F to 104˚F
2.5 lbs
2.4 -watts
E-XPDGBW
Single/double face:
LED Exit sign w/battery backup
(Green letters)
120- or 277-volt
50˚F to 104˚F
2.5 lbs
2.9 -watts
Performance
Electrical
• 1-year limited warranty
•
•
•
•
•
•
•
•
•
•
•
Construction & Materials
White housing
Single/Double face easily converts from double to single face.
Blank face included for single face installations
Sealed, maintenance-free nickel cadmium battery backup (90 min.)
Easy to remove and replace chevrons
Wall mountable/includes canopy for top or side mounting
Push-to-test switch
Charge/power-on indicator light
Long Life LED
Automatic low-voltage disconnect and brownout protection
Injection molded, UL94V-0 flame retardant, ABS virgin plastic housing
Labor saving AC line latching
Regulatory
• Listed and complies with UL924
• Complies with NFPA 101 Life Safety Code
• Suitable for damp locations
Due to continuous product improvement, information in this document is subject to change. All published photometric testing performed to IESNA LM-79-08
standards by a NVLAP certified laboratory. Fixture photometry was completed on a single representative fixture. Actual production units may vary up to
±10% of initial delivered lumens. Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ fixture testing.
1501 96th Street, Sturtevant, WI 53177 | Phone (888)243-9445 | Fax (262)504-5409 | www.e–conolight.com