CenturyLink Ordering Guide
Terminal Product Solutions
FIRST ED ITION
This CenturyLink Ordering Guide and the information contained within is confidential and restricted for use by CenturyLink personnel only.
If you have received this ordering guide in error, any use, reproduction or dissemination is strictly prohibited.
Contents
Terminal Product Solutions
Cold Sealed Terminals
Cold Sealed Terminals................................................................................................... 1
CST® Terminal Accessories............................................................................................. 2
DTerminator 3® Terminal Solutions
DTerminator 3® Standard Terminals.................................................................................. 3
DT3 Standard Terminals - Pedestal Mount...................................................................... 3
DT3 Standard Terminals - Pole Mount............................................................................ 4
DT3 Standard Terminals - Strand Mount......................................................................... 4
DTerminator 3 SwitchTerm Terminals................................................................................. 5
DT3 SwitchTerm Terminals - Pedestal Mount.................................................................... 5
DT3 SwitchTerm Terminals - Pole Mount......................................................................... 5
DT3 SwitchTerm Terminals - Strand Mount...................................................................... 5
DTerminator 3 Accessories............................................................................................. 6
DTerminator 2® Terminal Solutions
DTerminator
DTerminator
DTerminator
DTerminator
DTerminator
DTerminator
2® - Pedestal Terminal Blocks.......................................................................... 7
2 - Plastic Pole Mounted Terminals................................................................... 8
2 - Integrated Closure Terminals.................................................................... 10
2 - Strand-Mount Terminals........................................................................... 12
2 - Cross-Connect Pole Mounted Terminals...................................................... 13
2 Accessories........................................................................................... 14
Index...................................................................................................................... 15
Terminal Product Solutions
Cold Sealed Terminals
Cold Sealed Terminals
The Cold Sealed terminal closure (CST®) is environmentally sealed and available with 10-pair DTerminator 2® terminal blocks or 25- and 50-pair
Dat@Term terminal blocks which can be used above or below grade. Craft friendly, tool-less design requires no additional parts or accessories
to install standard 2-, 3-, 5-, or 6-pair service drops. Optional grommet kits accommodate 2-pair to 6-pair aerial service wire. The CST terminal
closure incorporates the Dat@Term terminal termination system. This design provides the reliability required for the new revenue generating “Triple
Play” services over copper networks under any OSP environmental conditions.
Specifications
Dome:
6” Diameter, 11.1” Length
Overall:
7.5” Diameter, 12” Length
Drop Ports:
20
Grommets (Round Cable):
0.28" - 0.42" Diameter Cable
Grommets (Rectangular Cable:
0.18” x 0.40” to 0.27” X 0.49”
Ordering Information
Descriptor
Part
Number
CenturyLink
Material Code
10-Pair DTerminator 2 CST Closure Kit
8ft filled shielded cable stub,
no service drop wires installed.
Includes (3) round, (2) rectangular grommets
and universal mounting bracket
CST-B5C2-10A-08F-MG2-RVA
E79382-000
1160329
25-Pair Dat@Term CST Closure Kit
12ft filled shielded cable stub,
no service drop wires installed.
Includes (4) round, (1) rectangular grommets
and universal mounting bracket
CST-B5C1-25B-12T-MG1-RVA
PD6689-000
1160330
Description
1
For more information, visit commscope.com
Terminal Product Solutions
Cold Sealed Terminals
Cold Sealed Terminals
Ordering Information
Replacement Round
Grommet Kit
Replacement Flat
Grommet Kit
Replacement Round Hole
Plugs
Replacement Flat Hole
Plugs
Replacement
O-Ring
Test Clips
Descriptor
Part
Number
Replacement Round Grommet Kit
Accommodates all 2-pair to 6-pair round drops for
CST and Mini CST terminals
CST-ACC-GROM-ROUND-RVA
G22249-000
Replacement Flat Grommet Kit
Accommodates all 3-pair to 6-pair flat drops;
comes with the flat plugs preinstalled for CST and
Mini CST terminals
CST-ACC-GROM/PLUG-SQ-RVA
C51978-000
1179500
Replacement Round Hole Plugs
Used after removal of round service wire
to plug hole in grommet to CST and
Mini CST underground terminals
CST-ACC-HPLUG-RD-REVA
G22250-000
1179504
Replacement Flat Hole Plugs
Used to plug unused flat ports in grommet for
CST and Mini CST underground terminals
CST-ACC-HPLUG-SQ-REVA
C78001-000
1179502
Universal Mounting Bracket
Mounts CST or Mini CST to a manhole rack
CST-ACC-UMBRKT-REVA
C18598-000
1179499
Sealing Clamp
For use on any CST terminal
CST-ACC-CLAMP-REVA
C98710-000
1179503
Standard Replacement Dome
For use on any CST terminal
CST-ACC-DOME-B11-REVA
C61612-000
1179501
Replacement O-Ring
Use with 25-and 50-pair CST underground
terminals; also used with FOSC 450B
FOSC-ACC-450-B-ORING
A51343-000
1125575
DTM-ACC-WNG-TEST-CLIP-5
C56795-000
1160331
Description
CenturyLink
Material Code
CST Terminal Accessories
Test Clip
Single pair access test clip with dual ears and
hole for tether; used on Dat@Term IDC blocks
2
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 3® Terminal Solutions
DTerminator 3® Standard Terminals
DTerminator 3 (DT3) terminals are high density, environmentally sealed terminal
blocks that provide toolless operation for pedestal, pole mount and strand mount
applications. Subscriber connections can be made on 19 to 26 AWG solid
copper conductors without stripping the insulation or requiring any special adapters.
Patented GelGuard gel sealing technology provides superior sealing performance
in environmentally demanding terminal applications. DTerminator 3 terminals are
UL Listed for Indoor/Outdoor use when installed in a suitably approved UL Listed
enclosure including units mounted on or inside a building. Terminal blocks mounted
in a restricted access area inside a building do not require an enclosure.
DT3 Standard Terminals - Pedestal Mount
Ordering Information
Description
Cable
Type / Length
Descriptor
Part
Number
CenturyLink
Material Code
Filled unshielded, 4'
DT3-PTB-06FU04F-RD3-1XXA
D46573-000
1160315
Filled shielded, 12'
DT3-PTB-06FS12F-RD3-1XXA
A07122-000
1160313
Filled shielded, 25'
DT3-PTB-06FS25F-RD3-1XXA
D02574-000
1160314
Filled unshielded, 4'
DT3-PTB-12FU04F-RD3-1XXA
C05818-000
1160309
Filled shielded, 12'
DT3-PTB-12FS12F-RD3-1XXA
C37010-000
1160307
Filled shielded, 25'
DT3-PTB-12FS25F-RD3-1XXA
E23233-000
1160308
Filled unshielded, 4'
DT3-PTB-25FU04F-RD3-1XXA
E51295-000
1160312
Filled shielded, 12'
DT3-PTB-25FS12F-RD3-1XXA
C93034-000
1160310
Filled shielded, 25'
DT3-PTB-25FS25F-RD3-1XXA
E38116-000
1160311
DT3 Standard Terminals - Pedestal Mount
Non-protected terminal block, right drop entry, stub cable exit down
6-Pair
12-Pair
25-Pair
3
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 3 Terminal Solutions
DT3 Standard Terminals - Pole Mount
Ordering Information
Cable
Type / Length
Descriptor
Part
Number
CenturyLink
Material Code
Filled shielded, 12'
DT3-PMT-12FS12F-LU3-1RXA
E79366-000
1160317
Filled shielded, 25'
DT3-PMT-12FS25F-LU3-1RXA
748192-000
1160318
Filled shielded, 12'
DT3-PMT-25FS12F-LU3-1RXA
F50233-000
1160326
DT3-PMT-25FS25F-LU3-1RXA
C76252-000
1160316
DT3-PMT-25FS25F-LU3P1RXA*
A86479-000*
1179489*
Filled shielded, 50'
DT3-PMT-25FS50F-LU3-1RXA
D98607-000
1160321
Filled armor, 25'
DT3-PMT-25FA25F-LU3-1RXA
C12145-000
1160319
Aircore pressurized, 25'
DT3-PMT-25PS25F-LU3-1RXA
D18545-000
1160320
Filled shielded, 12'
DT3-PMT-50FS12F-BU3-1RXA
D25003-000
1160324
Filled shielded, 25'
DT3-PMT-50FS25F-BU3-1RXA
F84787-000
1160325
Filled armor, 25'
DT3-PMT-50FA25F-BU3-1RXA
F55393-000
1160322
Aircore pressurized, 25'
DT3-PMT-50PS25F-BU3-1RXA
F60996-000
1160323
Descriptor
Part
Number
CenturyLink
Material Code
DT3-SMT-50PS12F-DL3-1RXA
C24007-000
1160327
Description
DT3 Standard Terminals - Pole Mount
Non-protected terminal block, left drop entry, stub cable exit up
12-Pair
Filled shielded, 25'
25-Pair
50-Pair
* Does not include housing; for Encap shop use ONLY.
Note: 50-pair terminals have both (right and left) drop enteries.
DT3 Standard Terminals - Strand Mount
Ordering Information
Description
Cable
Type / Length
DT3 Standard Terminals - Strand Mount
Non-protected terminal block, down drop entry, stub cable exit left
50-Pair
Aircore pressurized, 12'
DT3 Standard Terminals - Strand Mount with Integrated Splice Closure*
Non-protected terminal block, down drop entry, stub cable exit back
12-Pair
PVC tip-tracer, 3'
DT3-ICT-12VT03F-DB3-1BXA
D86826-000
1160305
25-Pair
PVC tip-tracer, 3'
DT3-ICT-25VT03F-DB3-1BXA
E64327-000
1160306
* ICT “B” housing
4
* Does not include housing; for Encap shop use ONLY.
Note: 50-pair terminals have both (right and left) drop enteries.
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 3 Terminal Solutions
DTerminator 3 SwitchTerm Terminals
SwitchTerm terminals enable disconnecting and re-connecting the downstream (field side)
conductors of each pair by simply flipping a switch. This feature also allows maximum
utilization of previous deployed copper.
DT3 SwitchTerm Terminals - Pedestal Mount
Ordering Information
Cable
Type / Length
Description
Descriptor
Part
Number
CenturyLink
Material Code
Filled shielded, 4'
DT3-PTBS25FS04F-RD3-1XHA
A33978-000
1160346
Filled shielded, 12'
DT3-PTBS25FS12F-RD3-1XHA
C55532-000
1160344
Filled shielded, 25'
DT3-PTBS25FS25F-RD3-1XHA
F07002-000
1160345
Part
Number
CenturyLink
Material Code
DT3 SwitchTerm Terminals - Pedestal Mount
Non-protected terminal block, right drop entry, stub cable exit down
25-Pair
DT3 SwitchTerm Terminals - Pole Mount
Ordering Information
Cable
Type / Length
Description
Descriptor
DT3 SwitchTerm Terminals - Pole Mount
Non-protected terminal block, left drop entry, stub cable exit up
25-Pair
Filled shielded, 12'
DT3-PMTS25FS12F-LU3-1RXA
D34953-000
1160347
Filled shielded, 25'
DT3-PMTS25FS25F-LU3-1RXA
D91512-000
1160348
Pressurized shielded, 12'
DT3-PMTS25PS12F-LU3-1RXA
249792-000
1160349
Pressurized shielded, 25'
DT3-PMTS25PS25F-LU3-1RXA
A31353-000
1160350
Descriptor
Part
Number
CenturyLink
Material Code
Pressurized shielded, 12'
DT3-SMTS25PS12F-DR3-1RXA
F36640-000
1160354
Pressurized shielded, 25'
DT3-SMTS25PS25F-DR3-1CZA
980074-000
1160355
DT3 SwitchTerm Terminals - Strand Mount
Ordering Information
Description
Cable
Type / Length
DT3 SwitchTerm Terminals - Strand Mount
Non-protected terminal block, down drop entry, stub cable exit right
25-Pair
5
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 3 Terminal Solutions
DTerminator 3 Accessories
Ordering Information
Descriptor
Part
Number
CenturyLink
Material Code
Single pair test clip
DT3-ACC-TEST-CLIP-ADAPTR
721190-000
1160356
Preterm shop only
DT3-ACC-TESTCLIP-SPEC-RB
A16609-000
-
Heavy duty test clip blade; preterm shop only
DT3-ACC-TESTCLIP-BLADE-A
C30622-000
1183251
DT3-ACC-TOGGL-REMOV-TOOL
E44611-000
1160357
White
DT3-ACC-0050-TOGGLE-9XXA
E92043-000
1160358
Red
DT3-ACC-0050-TOGGLE-2XXA
D44849-000
1160353
Purple
DT3-ACC-0050-TOGGLE-7XXA
728138-000
1160352
DT3-TERMCAP-REUSE-KIT
C05102-000
1179467
TRAC-ICT-B-EXTENSION-KIT
397885-000
1106734
Description
DTerminator 3 Accessories
Test Clips
Toggle Removal Tool
Hand tool used to remove or replace single pair toggles
Replacement Toggles
Reusable Shipping Cap
Used to physically cover and protect the spliced DT3 terminal block
Integrated Closure Terminal (ICT) Extension Kit
For extending DT2, DT3 or TRAC ICTs
6
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2® Terminal Solutions
DTerminator 2® - Pedestal Terminal Blocks
The DTerminator 2® PTP pedestal mounted terminal block systems utilize CommScope’s
revolutionary GelGuard® gel sealing technology to environmentally protect the wire connections.
The DTerminator 2 PTP protected terminal block contains driver modules with environmentally
sealed circuit protectors. Each connection is protected by a three-element gas discharge tube.
Ordering Information
Description
Cable
Type / Length
Descriptor
Part
Number
CenturyLink
Material Code
Protected DTerminator 2 Pedestal Terminal Blocks
Driver: Vent safe/fail safe 265-600V 24 AWG, violet right drop entry, stub cable exit down
12-Pair
25-Pair
Filled unshielded, 4'
DT2-PTP-12FU04F-RD2-1XXA
623797-000
1160334
Filled shielded, 12'
DT2-PTP-12FS12F-RD2-1XXA
186141-000
1160333
Filled shielded, 25'
DT2-PTP-12FS25F-RD2-1XXA
791375-000
1179445
Filled unshielded, 4'
DT2-PTP-25FU04F-RD2-1XXA
756845-000
1160337
Filled shielded, 12'
DT2-PTP-25FS12F-RD2-1XXA
373933-000
1160335
Filled shielded, 25'
DT2-PTP-25FS25F-RD2-1XXA
392321-000
1160336
7
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DTerminator 2 - Plastic Pole Mounted Terminals
The DTerminator 2 PMT/PMX/PMP terminal systems are pole/wall-mounted terminals utilizing
CommScope’s revolutionary GelGuard gel sealing technology to environmentally protect the wire
connections.
The DTerminator 2 PMP protected terminal block contains driver modules with factory-sealed circuit
protectors. Each connection is protected by a three-element gas discharge tube.
The DTerminator 2 PMT unprotected terminal block offers enhanced characteristics in a rugged
aluminum housing with a swing-out door.
The DTerminator 2 PMX upgradable terminal block includes a ground strip. Although it is an
unprotected model, the PMX driver modules can be easily replaced in the field with protected driver.
DT2 PMP Protected
Ordering Information
Description
Cable
Type / Length
Descriptor
Part
Number
CenturyLink
Material Code
Filled shielded, 12'
DT2-PMP-12FS12F-LU2-1RXA
292181-000
1160338
Filled shielded, 25'
DT2-PMP-12FS25F-LU2-1RXA
350991-000
1179446
Filled shielded, 12'
DT2-PMP-25FS12F-LU2-1RXA
163153-000
1160339
Filled shielded, 25'
DT2-PMP-25FS25F-LU2-1RXA
641363-000
1160340
DTerminator 2 Protected Pole Mount Terminal Blocks
Driver: Vent safe/fail safe 265-600V 24 AWG, violet left drop entry
12-Pair
25-Pair
Ordering information continued on following page.
8
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DT2 PMT Unprotected
Ordering Information
Cable
Type / Length
Descriptor
Part
Number
CenturyLink
Material Code
Aircore pressurized, 12'
DT2-PMT-10PS12F-LD3-1RXA
728853-000
1103345
Aircore pressurized, 25'
DT2-PMT-10PS25F-LD3-1RXA
684791-000
1103344
15-Pair
Aircore pressurized, 25'
DT2-PMT-15PS25F-LU3-1RWA
457451-000
1103342
25-Pair
Aircore pressurized, 25'
DT2-PMT-25PS25F-LU3-1RWA
304756-000
1103343
Descriptor
Part
Number
CenturyLink
Material Code
Description
DTerminator 2 Unprotected Pole Mount Terminal Blocks
Driver: Vent safe/fail safe 265-600V 24 AWG, violet left drop entry
10-Pair
DT2 PMX Upgradable *Restricted Use*
Ordering Information
Description
Cable
Type / Length
DTerminator 2 Upgradable Pole Mount Terminal Blocks
Driver: Vent safe/fail safe 265-600V 24 AWG, violet left drop entry
12-Pair
Filled shielded, 25'
DT2-PMX-12FS25F-LU3-1RXA
620387-000
1160301
25-Pair
Filled shielded, 25'
DT2-PMX-25FS25F-LU3-1RXA
977381-000
1160302
Note: DT2 PMT blocks are restriced for rehab use only when existing 18 1/2 gauge F drops cannot be replaced with new upgraded two-pair drops.
Existing single-pair F-drops may interfere with DSL services. Where 18 1/2 gauge drop wire is not installed you must use new DT3 terminals.
9
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DTerminator 2 - Integrated Closure Terminals
The DTerminator 2 ICX/ICT integrated closure terminal is a strand mounted, free breathing,
aerial closure with terminal intended for new construction and rehabilitation. The kit contains four
main components: two gel end-pieces, one central housing, and one unprotected DTerminator 2
terminal block.
The DTerminator 2 ICX upgradable terminal block includes a ground strip. Although it is an
unprotected model, the ICX driver modules can be easily replaced in the field with protected
driver modules, creating a protected pair unit when needed, saving unnecessary initial cost.
The DTerminator 2 ICT integrated closure terminal features a convoluted design with a selfsupporting bond assembly for easy installation with few parts. Recommended for use on nonpressurized polyethylene-sheathed aerial cable (including self-supporting aerial cable),
the DTerminator 2 terminal housing features a swing-up 180˚ access door, facilitating drop wire
installation and terminal block access.
DT2 ICX Upgradable *Restricted Use*
Ordering Information
Description
Descriptor
Part
Number
CenturyLink
Material Code
DTerminator 2 Upgradable ICX Strand Mount Terminal Blocks
Driver: Unprotected 24 AWG, white, ICT B size housing
12-Pair
DT2-ICX-12VT03F-DB3-1BXA
228290-000
1160303
25-Pair
DT2-ICX-25VT03F-DB3-1BXA
404276-000
1160304
Note: DT2 ICX blocks are restriced for rehab use only when existing 18 1/2 gauge F drops cannot be replaced with new upgraded two-pair drops.
Existing single-pair F-drops may interfere with DSL services. Where 18 1/2 gauge drop wire is not installed you must use new DT3 terminals.
10
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
Specifications
ICT
Housing
Max Splice
Diameter
Min/Max
Sheath Opening
End Piece
Opening
Approx.Cable
Pair
Approx.Cable
Pair
B
4.0”
13.0” / 17.0”
Main
Branch
25-600
0-300
0.55” / 1.90”
0” / 1.50”
DT2 ICT Unprotected
ICT B Size Closure Kit
Ordering Information
Description
Descriptor
Part
Number
CenturyLink
Material Code
457081-000
1103341
DTerminator 2 Unprotected ICT Strand Mount Terminal Blocks
Driver: Unprotected 24 AWG, white Mounting hardward included
25-Pair
DT2-ICT-25VT03F-DB3S1RXA
11
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DTerminator 2 - Strand-Mount Terminals
The DTerminator 2 SMX strand mounted aerial terminal is intended for new construction
and rehabilitation. CommScope’s unique IIDC (inverted insulation displacement connector)
accommodates 1.02 - 5.1mm (18.5-24 AWG) subscriber wires without stripping the
insulation or using special tools. Wires can be connected and disconnected many times
even after prolonged exposure to extreme temperatures. The DTerminator 2 SMX upgradable
terminal block includes a grounding strip. The SMX terminal can be easily upgraded in the
field by replacing modules with protected driver modules, creating a protected unit when
needed.
*Restricted Use*
Ordering Information
Description
Cable
Type / Length
Stub
Exit
Descriptor
Part
Number
CenturyLink
Material Code
Right
DT2-SMX-50PS12F-BR3-1CZA
F87051-000
-
Left
DT2-SMX-50PS12F-DL3-1RXA
C24007-000
1160327
DTerminator 2 SMX Upgradable Strand Mount Terminal Blocks
Driver: Unprotected 24 AWG, white
50-Pair
Aircore pressurized, 12’
Note: DT2 SMX blocks are restriced for rehab use only when existing 18 1/2 gauge F drops cannot be replaced with new upgraded two-pair drops.
Existing single-pair F-drops may interfere with DSL services. Where 18 1/2 gauge drop wire is not installed you must use new DT3 terminals.
12
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DTerminator 2 - Cross-Connect Pole Mounted Terminals
The DTerminator 2 XCX/XCP cross-connect pole-, strand-, or wall-mount closure terminals are intended for new construction and rehabilitation,
providing mechanical strength, security, and environmental protection for your connection. The kit consists of two main components: a
plastic housing and a DTerminator 2 6-pair cross connect block. CommScope’s unique inverted IDC (insulation displacement connector)
accommodates 1.02-0.51 mm (18-24 AWG) subscriber wires without stripping the insulation or using special tools. Wires can be connected
and disconnected many times, even after prolonged exposure to extreme temperatures. The DTerminator 2 XCX upgradable terminal block
includes a ground strip.
The DTerminator 2 XCX upgradable terminal block includes a ground strip. Although it is
an unprotected model, the driver modules can be easily replaced in the field with protected
driver modules, by replacing pairs marked T1R, T2R, etc., saving unnecessary initial cost.
The DTerminator 2 XCP protected terminal block contains driver modules with factory-sealed
circuit protectors. Each connection is protected by three-element gas discharge tube
Ordering Information
Descriptor
Part
Number
CenturyLink
Material Code
6-Pair Upgradable
Driver: Unprotected 24 AWG, white
DT2-XCX-06NC00F-DX3-5RAA
159269-000
1160343
6-Pair Protected
Driver: VS/FS 265-600 24 AWG, violet
DT2-XCP-06NC00F-DX2-5RAA
C91639-000
1160351
Description
DTerminator 2 Cross-Connect Pole Mounted Terminals
13
For more information, visit commscope.com
Terminal Product Solutions
DTerminator 2 Terminal Solutions
DTerminator 2 Accessories
Protected Replacement Modules
Red Priority Caps
Ordering Information
Descriptor
Part
Number
CenturyLink
Material Code
Single Pair Replacement Module
For IDC terminal blocks
DT2-ACC-0020-2-CBA
797813-000
1117340
Single Pair Replacement Protected Module
For DTerminator 2 terminal blocks
DT2-ACC-0020-3-CBA
733483-000
1110669
Red Priority Caps
Designed as a single pair red cap to identify
special circuits on DTerminator 2 IDC blocks
DT2-ACC-25SCM-1-BAA
169609-000
1110668
Integrated Closure Terminal (ICT) Extension Kit
For extending DT2, DT3 or TRAC ICTs
TRAC-ICT-B-EXTENSION-KIT
397885-000
1106734
Description
DTerminator 2 Accessories
14
For more information, visit commscope.com
Terminal Product Solutions
Index
C
CST-ACC-CLAMP-REVA ................................. 2
CST-ACC-DOME-B11-REVA ........................... 2
CST-ACC-GROM/PLUG-SQ-RVA ������������������� 2
CST-ACC-GROM-ROUND-RVA ....................... 2
CST-ACC-HPLUG-RD-REVA ............................. 2
CST-ACC-HPLUG-SQ-REVA ............................ 2
CST-ACC-UMBRKT-REVA ............................... 2
CST-B5C1-25B-12T-MG1-RVA ....................... 1
CST-B5C2-10A-08F-MG2-RVA ....................... 1
D
DT2-ACC-0020-2-CBA .............................. 14
DT2-ACC-0020-3-CBA .............................. 14
DT2-ACC-25SCM-1-BAA ............................ 14
DT2-ICT-25VT03F-DB3S1RXA ...................... 11
DT2-ICX-12VT03F-DB3-1BXA ....................... 10
DT2-ICX-25VT03F-DB3-1BXA ....................... 10
DT2-PMP-12FS12F-LU2-1RXA ......................... 8
DT2-PMP-12FS25F-LU2-1RXA ......................... 8
DT2-PMP-25FS12F-LU2-1RXA ......................... 8
DT2-PMP-25FS25F-LU2-1RXA ......................... 8
DT2-PMT-10PS12F-LD3-1RXA ......................... 9
DT2-PMT-10PS25F-LD3-1RXA ......................... 9
DT2-PMT-15PS25F-LU3-1RWA ....................... 9
DT2-PMT-25PS25F-LU3-1RWA ....................... 9
DT2-PMX-12FS25F-LU3-1RXA ........................ 9
DT2-PMX-25FS25F-LU3-1RXA ........................ 9
DT2-PTP-12FS12F-RD2-1XXA ......................... 7
DT2-PTP-12FS25F-RD2-1XXA ......................... 7
DT2-PTP-12FU04F-RD2-1XXA ......................... 7
DT2-PTP-25FS12F-RD2-1XXA ......................... 7
DT2-PTP-25FS25F-RD2-1XXA ......................... 7
DT2-PTP-25FU04F-RD2-1XXA ......................... 7
DT2-SMX-50PS12F-BR3-1CZA ..................... 12
DT2-SMX-50PS12F-DL3-1RXA ...................... 12
DT2-XCP-06NC00F-DX2-5RAA .................... 13
DT2-XCX-06NC00F-DX3-5RAA .................... 13
DT3-ACC-0050-TOGGLE-2XXA ..................... 6
DT3-ACC-0050-TOGGLE-7XXA ..................... 6
DT3-ACC-0050-TOGGLE-9XXA ..................... 6
DT3-ACC-TEST-CLIP-ADAPTR .......................... 6
DT3-ACC-TESTCLIP-BLADE-A .......................... 6
DT3-ACC-TESTCLIP-SPEC-RB .......................... 6
DT3-ACC-TOGGL-REMOV-TOOL ������������������� 6
DT3-ICT-12VT03F-DB3-1BXA ......................... 4
DT3-ICT-25VT03F-DB3-1BXA ......................... 4
DT3-PMT-12FS12F-LU3-1RXA ......................... 4
DT3-PMT-12FS25F-LU3-1RXA ......................... 4
DT3-PMT-25FA25F-LU3-1RXA ......................... 4
DT3-PMT-25FS12F-LU3-1RXA ......................... 4
DT3-PMT-25FS25F-LU3-1RXA ......................... 4
DT3-PMT-25FS25F-LU3P1RXA* ...................... 4
DT3-PMT-25FS50F-LU3-1RXA ......................... 4
DT3-PMT-25PS25F-LU3-1RXA ......................... 4
DT3-PMT-50FA25F-BU3-1RXA ........................ 4
DT3-PMT-50FS12F-BU3-1RXA ........................ 4
DT3-PMT-50FS25F-BU3-1RXA ........................ 4
DT3-PMT-50PS25F-BU3-1RXA ........................ 4
DT3-PMTS25FS12F-LU3-1RXA ....................... 5
DT3-PMTS25FS25F-LU3-1RXA ....................... 5
DT3-PMTS25PS12F-LU3-1RXA ....................... 5
DT3-PMTS25PS25F-LU3-1RXA ....................... 5
DT3-PTB-06FS12F-RD3-1XXA ......................... 3
DT3-PTB-06FS25F-RD3-1XXA ......................... 3
DT3-PTB-06FU04F-RD3-1XXA ......................... 3
DT3-PTB-12FS12F-RD3-1XXA ......................... 3
DT3-PTB-12FS25F-RD3-1XXA ......................... 3
DT3-PTB-12FU04F-RD3-1XXA ......................... 3
DT3-PTB-25FS12F-RD3-1XXA ......................... 3
DT3-PTB-25FS25F-RD3-1XXA ......................... 3
DT3-PTB-25FU04F-RD3-1XXA ......................... 3
DT3-PTBS25FS04F-RD3-1XHA ....................... 5
DT3-PTBS25FS12F-RD3-1XHA ....................... 5
DT3-PTBS25FS25F-RD3-1XHA ....................... 5
DT3-SMT-50PS12F-DL3-1RXA ......................... 4
DT3-SMTS25PS12F-DR3-1RXA ....................... 5
DT3-SMTS25PS25F-DR3-1CZA ...................... 5
DT3-TERMCAP-REUSE-KIT .............................. 6
DTM-ACC-WNG-TEST-CLIP-5 ......................... 2
F
FOSC-ACC-450-B-ORING ............................ 2
T
TRAC-ICT-B-EXTENSION-KIT ..................... 6, 14
15
For more information, visit commscope.com
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
© 2015 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties
relating to CommScope products or services.
CL-0013 10/13