Job Information
Type
Project Name
A4101
Location
4" Recessed New Construction Housing
IC/Air-tight
Date
Quantity
Contact/Phone
Notes
Features
Housing
Constructed of single wall aluminum
to prevent corrosion. The housing is
gasketed to allow for air-tight installation.
Housing can height allows for installation
in 2" × 8" joist construction. Adjustable
can to accommodate ceiling materials
up to 1¼" thick.
Hanger Bars
With a maximum extension of 25"
these hanger bars allow excess
distance between joists. Housing can
be positioned at any point along the
joist span and secured in place with
oversized locking set screw. Score lines
on the hanger bars allows for tool-less
shortening for 12" joists. Integral T-bar
clips easily snap onto T-bars. These
hanger bars can be repositioned 90°.
Junction Box
Listed for through branch circuit wiring.
Maximum eight no. 12 AWG 90°C
branch circuit conductions (four in
and four out). Five ½” knockouts with
true pry-out slots and four knockouts
with Romex® cable clamp. Ground
wire is provided on J-Box. Push-in
terminal connectors provided for easy
installation.
G24Q/Gx24Q base socket for use with
4-pin DTT, TTT lamps.
or 120 or 347 volt High Power Factor
(HPF). Electronic ballast provides full
light output and rated lamp life. Provides
flicker free and noise free operation
and starting. End of lamp life protection
is standard. Meets FCC EMT/RFI
Consumer level limits.
Lamps
Labels
• Compact Fluorescent lamps.
• Non-IC applications:
* DTT – Double twin tube (Quad/CFQ)
– CFQ 13W / G24Q / 830
– CFQ 18W / G24Q / 830
– CFQ 26W / G24Q / 830
* TTT – Triple twin tube (CFTR)
– CFTR 18W / Gx24Q / 830
– CFTR 26W / Gx24Q / 830
• IC applications:
* DTT – Double twin tube (Quad/CFQ)
– CFQ 13W / G24Q / 830
– CFQ 18W / G24Q / 830
* TTT – Triple twin tube (CFTR)
– CFTR 18W / Gx24Q / 830
• UL listed for damp locations.
• UL listed for direct contact with
insulation material.
• UL listed for feed through.
• Air-tight, performance tested under
ASTM-283.
Socket
Compliance
• State of California title 24.
• Washington state energy code.
• New York state energy conservation
construction code.
• Energy star qualified.
• Certified air-tight under ATM-283.
Ballast
7-9/16"
192mm
4-5/16"
110mm
Notes: Accessories should be ordered
separately. For additional options please
consult your A-Line representative. Romex is a
registered trademark of Southwire Company.
Due to our continued efforts to improve our
products, product specifications are subject to
change without notice.
12-5/16"
313mm
Nominal lamp 13W, 18W, 26W
wattage
HPF
Ordering Guide
Ballast
Lamp
A4101 -
N120 = 120V Normal Power Factor
H120 = 120V High Power Factor
H347 = 347V High Power Factor
13 = 13 watt
18 = 18 watt
26 = 26 watt
Example: A4101-N120-18
REV041-2.22.12
The A4101 is designed for insulated
ceilings and can be in direct contact with
ceiling insulation. This air-tight housing
design prevents airflow through ceiling
for saving heating and air conditioning
costs. The A4101 offers a wide choice of
trim types including reflector, lensed and
wall wash trims.
Thermally protected electronic ballast,
120 volt Normal Power Factor (NPF);
6-5/16"
160mm
Liteline Corporation
info@liteline.com
www.liteline.com
Description
8 Abacus Road
Brampton, Ontario
Canada L6T 5B7
PHONE | TÉLÉPHONE
416-996-1856
1-866-730-7704
FAX | TÉLÉCOPIEUR
905-794-1990
1-888-738-9736
13W, 18W, 26W
NPF
Input current
0.12A, 0.17A, 0.24A 0.12A, 0.17A, 0.24A
Input power
14W, 20W, 28W
Power factor
0.998, 0.998, 0.998 0.630, 0.635, 0.641
16W, 23W, 31W