General Lab Safety (30 questions)
True or False- Please write out “True” and just a capital “F” for False
DO NOT MARK ON THIS PAPER…..THANK YOU!
1- While in the Research and Design Lab(shop area) you must always wear proper eye
protection.
2- Running, playing, and throwing things in the tech ed. lab is okay.
3-You may use a machine before your teacher gives the safety demonstration and shows you
how to properly use the machine.
4-Long hair should be tied up when using power tools and machines.
5-Machine tool guards may be removed if they are in your way.
6- Report every injury, no matter how small, to the teacher.
7-When oil or grease is spilled on the floor, it should be cleaned up at once.
8-You may stand next to a person inside the safety zone when someone else is using the
machine.
9-Never use power tools without the teacher’s daily permission.
10-You may talk to another person while they are using a power tool.
11-You do not need to check tools before using them to see if they are in good working
condition.
12-Locker doors should be closed and locked when not in use.
13-Tools or materials should not be allowed to hang over the edge of the worktable and/ or
sharp tools placed on the floor.
14-A handy place to carry sharp or pointed tools is in your pocket.
15- Loose clothing, jewelry, ID bracelets or tags may be worn when using power tools.
DO NOT MARK ON THIS PAPER…..THANK YOU!
DO NOT MARK ON THIS PAPER…..THANK YOU!
16-You should never walk away and leave a machine running.
17-You should report any tools or machine that is out of order or unsafe to the instructor.
18-Only one person may use a machine at a time.
19 Always carry cutting tools carefully paying attention to the sharp cutting edges.
20-It is okay to blow off machines with air when cleaning up without your safety glasses on.
21-Paint and stains are not a fire hazard thus they do not need any special storage.
22-Dull tools are more dangerous than sharp tools because they require more force to use and
you could slip because of the great force needed.
23-Wood Saws may be used without a handle if you are careful.
24-If water is on the floor, its okay to leave it because it won’t be slippery and cause someone
to fall and get hurt.
25-Band saws may be left on (running) when you need to go to the restroom..
26-Oil Stain brushes are to be washed at the sink every time they are used.
27- Paper towels are to be thrown in the trash can and not the sink drain.
28-You do not need to wear your safety glasses if you are only sanding while in the shop..
29-You may place tools in your locker in the house “A” area to keep them from being lost.
30-Safety Rules are for Tech. Ed. class as well as your household and your life..
DO NOT MARK ON THIS PAPER…..THANK YOU!