5036 version 5
28-Jun-16
1 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach heels by nailing
level:
3
credit:
12
planned review date:
November 2005
sub-field:
Footwear and Leather Trades
purpose:
People credited with this unit standard are able to describe
and set up a heel nailing machine; nail heels to industry
specified performance and company quality standards; and
maintain machine.
entry information:
Open.
accreditation option:
Evaluation of documentation and visit by NZQA and
industry.
moderation option:
A centrally established and directed national moderation
system has been set up by Competenz.
special notes:
Specified industry performance is 55% BSI performance or
equivalent. BSI performance is the British Standards
Institute internationally recognised performance system
(BS3138) where 100% is the standard expected from a
competent fully qualified performer using the correct
methods and taking the allowed rest, working briskly, and as
though on an incentive. Other comparable rating or
performance systems such as the 60/80 system are
acceptable, with the appropriate performance adjustment.
Company safety requirements conform to the Health and
Safety in Employment Act 1992.
 New Zealand Qualifications Authority 2016
5036 version 5
28-Jun-16
2 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach heels by nailing
Elements and Performance Criteria
element 1
Describe and set up a heel nailing machine.
performance criteria
1.1
Machine parts are identified and described in terms of function and operation.
Range:
1.2
Machine is set up, tested, and adjusted to meet product specification and work
ticket requirements.
Range:
1.3
nail stand, hold down clamp, loader block, nail magazine,
operating controls.
nail stand and blocks, hold down pressure and hold down,
number of and nail length.
Drive sequence is set according to product specification and company
requirements and practice.
element 2
Nail heels.
performance criteria
2.1
Shoes and heels match work ticket requirements.
Range:
2.2
Heels are attached according to company quality standards.
Range:
2.3
style, size, material type, colour.
nail depth, nail alignment, heel alignment, heel tight to shoe, top
line not distorted, heel pitch.
Work is completed to specified industry performance standard.
 New Zealand Qualifications Authority 2016
5036 version 5
28-Jun-16
3 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach heels by nailing
2.4
Documentation is completed to company requirements and practice.
2.5
Work practices meet company safety requirements.
element 3
Maintain machine.
performance criteria
3.1
Machine is cleaned and irregularities reported according to company
requirements.
3.2
Machine is lubricated to company requirements and manufacturer's
specification.
3.3
Maintenance procedure meets company safety requirements.
Comments on this unit standard
Please contact Competenz info@competenz.org.nz if you wish to suggest changes to the
content of this unit standard.
Please Note
Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards
or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by the Qualifications Authority before
they can register credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit
standards must engage with the moderation system that applies to those standards.
 New Zealand Qualifications Authority 2016
5036 version 5
28-Jun-16
4 of 4
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach heels by nailing
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for providers wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is covered by AMAP 0030 which can be accessed at
http://www.nzqa.govt.nz/framework/search/index.do.
 New Zealand Qualifications Authority 2016