NZQA Expiring unit standard 9133 version 9 Page 1 of 3 Title Produce decorative finishes and make stencils for signmaking Level 4 Credits 10 Purpose People credited with this unit standard are able to produce a decorative panel or background surface for signmaking, and make and use stencils for signmaking. Classification Graphic Arts > Signmaking Available grade Achieved Explanatory notes None. Outcomes and evidence requirements Outcome 1 Produce a decorative panel or background surface for signmaking. Range examples include but are not limited to – simulated marble patterns, simulated timber-grains, broken colour effects, blended effects, multi-colour effects. Evidence requirements 1.1 1.2 This unit standard is The finish which meets project brief is identified. expiring The tools, brushes, and equipment for each process are identified. 1.3 The materials required to produce the finish are prepared and/or matched. 1.4 The finish is produced on prepared surfaces or samples according to project brief. Outcome 2 Make and use stencils for signmaking. Evidence requirements 2.1 The tools and equipment required to produce stencils are identified and selected. 2.2 Positive and negative stencil designs are drawn to meet project brief. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 9133 version 9 Page 2 of 3 2.3 Stencils are cut with clean edges and strong ties and meet project brief. 2.4 Paint is applied to stencil without flooding or blurring of edges. Replacement information This unit standard, unit standard 1059, and unit standard 1060 have been replaced by unit standard 27582. This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 18 December 1996 31 December 2014 Revision 2 31 January 1997 31 December 2014 Revision 3 9 March 1999 31 December 2014 Revision 4 12 December 2000 31 December 2014 Review 5 16 December 2003 31 December 2014 Rollover and Revision 6 23 January 2009 31 December 2014 Review 7 19 January 2012 31 December 2014 Reinstatement 8 16 April 2015 31 December 2019 Rollover 9 10 December 2015 31 December 2019 This unit standard is expiring Consent and Moderation Requirements (CMR) reference 0005 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 9133 version 9 Page 3 of 3 to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. This unit standard is expiring Competenz SSB Code 101571 New Zealand Qualifications Authority 2016