NZQA registered unit standard 9242 version 5 Page 1 of 3 Title Perform titrimetric analysis using colour indicators Level 4 Credits 5 Purpose People credited with this unit standard are able to: prepare volumetric standard solution; and perform titrimetric analysis using colour indicators. Classification Science > Chemistry Available grade Achieved Explanatory notes 1 All work must be carried out in accordance with the quality management system, documented protocol system or Standard Operating Procedures (SOP) typically acceptable in a commercial or research laboratory. 2 Health and Safety practices must conform to Australian/New Zealand Standard AS/NZS 2243:2006 Set – Safety in Laboratories Parts 1, 2, 3, 7, and 10 available at http://www.standards.co.nz and http://infostore.saiglobal.com/store. 3 Legislation applicable to this unit standard includes: Health and Safety in Employment Act 1992; Hazardous Substances and New Organisms Act 1996. 4 Glossary Certified reference value is a value traceable to a national or international standard. Laboratory procedures refer to documented systems or processes of operation, which may be found in a SOP manual, quality management system or protocol system documentation. These procedures are external and/or internal laboratory requirements governing laboratory work. Outcomes and evidence requirements Outcome 1 Prepare volumetric standard solution. Evidence requirements 1.1 Solute amount is calculated and measured to required accuracy for the analysis in accordance with laboratory procedure. 1.2 Secondary standard is established by titration against primary standard in accordance with laboratory procedure. NZQA National Qualifications Services SSB Code 130301 New Zealand Qualifications Authority 2016 NZQA registered unit standard 9242 version 5 Page 2 of 3 Outcome 2 Perform titrimetric analysis using colour indicators. Range three of – acid-base, redox, complexiometric, precipitation. Evidence requirements 2.1 Procedure, equipment, and colour indicators are used to meet the needs of the analysis in accordance with laboratory procedure. 2.2 The titration is carried out in accordance with titration protocol. 2.3 Concentration of analyte is determined within a relative accuracy of ±5% of the certified reference value. Planned review date 31 December 2017 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 30 January 1997 31 December 2014 Revision 2 19 February 1998 31 December 2014 Review 3 23 November 1999 31 December 2014 Review 4 18 June 2010 N/A Rollover 5 27 January 2015 NA Consent and Moderation Requirements (CMR) reference 0152 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. NZQA National Qualifications Services SSB Code 130301 New Zealand Qualifications Authority 2016 NZQA registered unit standard 9242 version 5 Page 3 of 3 Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact NZQA National Qualifications Services nqs@nzqa.govt.nz if you wish to suggest changes to the content of this unit standard. NZQA National Qualifications Services SSB Code 130301 New Zealand Qualifications Authority 2016