ALL-PRO
™
DESCRIPTION
ALL-PRO ETR350 ProSeries MiniCan is a round 3” aperture Non-IC
AIR-TITE™ recessed housing and trim kit for use with 50W MR16
120V GU10 base reflector lamps. The Mini-Can ProSeries kits
include a baffle trim with a choice of White or Black baffle. MiniCan
is perfect for use in niche areas, soffits, case work and displays. The
unique housing design allows installation in new construction or in
remodel construction. The AIR-TITE design prevents airflow
between living areas and unconditioned areas, and the housing is
Non-IC rated for non-insulated ceilings. If ceiling insulation is
present it MUST be kept 3 inches away from all sides of the housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ...H o u s i n g
wire connectors included.
trims securely in the housing.
• Round die-formed 20 gauge CRS
with gray powder coat finish.
B ...P l a s t e r F r a m e
• Galvanized steel construction.
• Boat-shaped plaster frame
design with removable bar
hangers for installation in new
construction or in remodel
construction from below the
finished ceiling.
• ALL-PRO and ProSeries identity
printed on plaster frame.
C ...G a s k e t s
• Closed cell gaskets restrict
airflow, meeting air tight code
requirements without additional
caulking
D ...T r i m s
• Baffle trims in Gloss White or
Black with Gloss White trim
rings.
• Friction type springs hold baffle
E ...B a r H a n g e r s
G ...T h e r m a l P r o t e c t o r
• All-Nail™ preinstalled bar
hangers adjust up to 24” wide.
• All-Nail™ preinstalled nail
penetrates standard and
engineered lumber.
• Mini-levelling flange aligns bar
hangers on bottom of joist.
• Score lines allow bars to be
shortened for use in tight joist
spaces.
• Integral T-bar clip snaps onto Tbars - no additional clips
required.
• Self Resetting thermal protector
protects against improper
lamping and direct contact with
insulation.
H ...L a m p S o c k e t
• GU10 base for bi-pin ceramic
line voltage halogen lamps.
I ...L a m p
• 50W, 120V, GU10 base, MR16
reflector lamp (by others).
3” Round Recessed
Code Compliance
• UL/cUL Listed
• UL/cUL Listed for Damp
Location
• UL/cUL Listed for Feed Through
• IP labeled
• Certified under ASTM-E283
standard for air-tight
construction.
F ...J u n c t i o n B o x
• Four 1/2” trade size conduit
knockouts with true pry-out
slots.
• Three non-metallic cable
pryouts with integral clamps.
Rated for (4) #12 through
branch circuits.
• Three Quick connect push type
5-1/4"
[133mm]
E
Housing and Trim Kit
50W MR16 120V GU10
Tungsten Halogen
Reflector Lamp
ROUND TRIMS
F
A
ETR350
ETR350W
FOR USE IN NONINSULATED CEILINGS
B
5"
[127mm]
7/16"
[11mm]
C
3"
[76mm]
INSULATION MUST BE
KEPT 3” FROM
HOUSING
3-3/16"
[81mm]
4-1/8"
[104mm]
ORDERING INFORMATION
SAMPLE NUMBER: ETR350 Unit includes housing, plaster frame, hanger bars and trim
(lamp not included)
Housing
Lamp (Order Separately)
Z28
ETR350=3” Round Aperture Non-IC AIRTITE Housing for
50W MR16-120V GU10
Black Baffle, Gloss White Trim Ring
ETR350W=3” Round Aperture Non-IC AIRTITE Housing
for 50W MR16-120V GU10
White Baffle, Gloss White Trim Ring
Z28=50W, 120V MR16, GU10 base, MR16
11/08
ADV082456
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
ALL-PRO
INSTALLATION
™
Installation - New Construction, Suspended Ceiling or Remodel
New Construction
For new construction, the plaster frame and bar hangers are installed first. Remove trim from housing. After the ceiling is installed,
the housing can be wired and then slid into the ceiling and secured with the plaster frame clips.
Suspended
Ceiling
After cutting a hole in the ceiling tile, the plaster frame and bar hangers are installed. The bar hangers have integral T-bar clips. Insert the housing into the ceiling
tile, secure in place with plaster frame clips and complete the wiring.
Remodel
After cutting a hole in the ceiling, Install plaster frame and secure in place with clips. Make wiring connections and insert housing into ceiling. Finally, secure
housing in place with plaster frame clips.
11/08
ADV082456
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049