COMBOLIGHT Catalog # Type Project

advertisement
DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes TWO (2) PAR30
120V lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
E.... Lamps
Two (2) PAR30 120V lamps mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
Med. base sockets.
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G.... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 6.94" x 12.47"
(176mm x 317mm)
10.31"
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Two (2) Light
PAR30 120V
Remodel Housing
w/ 0.75" (19mm) Trim Flange
14.18"
262mm
360mm
7.95"
202mm
7.45"
7.19"
12.88"
189mm
183mm
Required
above
ceiling
12.21"
310mm
327mm
11.38"
289mm
5.69"
Double
Gimbal
145mm
5.69"
145mm
*Media Holder:
White - LND-MH-W
Black - LND-MH-B
Silver - LND-MH-S
45º x 45º
Adjust
Thermal
Protector
For use with PAR30 120V lamps 75W max.
ORDERING INFORMATION
C2
Configuration
C2 = COMBOLIGHT
Recessed Two (2) Light
R
N
Lamp Type / Wattage Label
075P30 = 75 Watt max. PAR30 120V
Housing
R = Remodel
www.cooperlighting.com
1
Primary Voltage
1 = 120V
Power Supply
N = None - Line Voltage Lamp
T
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/15/2013
Download