HALO Commercial
d esc r iption
Type
Catalog #
Recessed 8 inch aperture open downlight for vertical PAR38
metal halide lamp. Electronic ballast suitable for 120 volt or 277
volt operation. Fixture is suitable for commercial construction.
Insulation must be kept 3" from top and sides of housing. Specify
housing and trim separately to complete luminaire.
Project
Date
Comments
Prepared by
S P E C I F I C A T I O N feat u r es
M ec h anica l
Frame
Boat shaped galvanized steel
frame with 1/2" plaster lip
accommodates ceilings up to
2" thick. May be used for new
construction or remodeling
installations. Provided with (2)
remodel clips to secure frame
when installed from below the
ceiling.
Mounting Brackets
Bar hanger receivers adjusts 2"
vertically from above the ceiling
or thru the aperture. Use with
No Fuss™ bar hangers or with
1/2" EMT. Removable to facilitate
installation from below the
ceiling.
No Fuss™ Bar Hangers
Pre-installed and centered bar
hanger locks to tee grid with a
screwdriver or pliers. Centering
marks on the bar hanger
mechanism allows consistent
positioning of fixtures.
O ptica l
Reflector
Highly efficient one piece
aluminum reflector provides for
lamp and lamp image cutoff for
a visually comfortable optic. Self
flanged standard.
-Specular Reflectors - Polished flange standard with white painted flange option.
-Baffles and White Reflector - White painted flange standard.
Socket Cap
Galvanized steel socket housing
attached securely to reflector with
turn & lock mechanism. Vents
provide effective lamp thermal
management.
Control Gear
Dual input 120V/277V or 347V
electronic ballast.
Insulation Dectector
Self heating insulation detector
opens circuit if insulation is
improperly installed.
Trim Retention
Code Compliance
Reflector is retained with two
- Thermally protected and cULus torsion springs and held tightly to
listed for damp locations.
the finished ceiling surface.
- IP20 rated for open trims.
E l ect r ica l
- EMI/RFI per FCC Title 47 CFR, Junction Box
(6) 1/2" and (2) 3/4" trade size pry Part 18, non consumer limits.
outs positioned to allow straight - High efficacy luminaire may be conduit runs. Listed for (12)
used to meet IECC, ASHRAE, #12 AWG (six in, six out) 90°C
and Title 24 commercial conductors and feed thru branch standards.
wiring.
- Meets California T20 and Lamp Socket
Federal EISA ballast efficiency Pulse rated E26 medium base
standards.
protected porcelain socket with
nickel plated brass screw shell.
PD8P70E
PD8P100E
PD8P150E
80V
70, 100, 150W PAR38
Metal Halide
8-Inch Aperture
Open PAR Downlight
New Construction or
Remodel
Non-IC
DIMENSIONS
9.376"
[238.16mm]
8.375" I.D.
[212.73mm]
9.250"
[234.95mm]
9.750" O.D
[247.65mm]
26.400"
[670.56mm]
9.472"
[240.59mm]
16.181"
[410.99mm]
ADV111722
January 2, 2013 3:34 PM
HALO Commercial
PD8P70E
P D 8 P 10 0 E
PD8P150E
80V
E N E R G Y D ATA
PD8P70E, PD8CPP70E
Min. Starting Temp -15°C, +5°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
Input Frequency 50/60 Hz
Power Factor > 0.95
THD < 6% @ 120V
Input Voltage
120V/277V ±10%
PD8P100E, PD8CPP100E
Min. Starting Temp -15°C,
+5°F
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
Input Frequency 50/60 Hz
Power Factor > 0.95
THD < 8% @ 120V
Input Voltage
120V/277V ±10%
THD < 12% @ 277V
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency 140 Hz
cULus Listed,
Type 1 Outdoor
70PAR30L, CDM70/PAR30L/M/
70PAR30L, CMH70PAR30L/
70PAR30LN, MCP70PAR30LN/U/
70PAR38, CDM70/PAR38/
70PAR38, CMH70PAR38/
70PAR38, MCP70PAR38/U/
THD < 11% @ 277V
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency 140 Hz
cULus Listed, Type 1
Outdoor
Input Power
81W @ 120V
Input Power
80W @ 277V
Input Current
0.69A @ 120V
Sound Rating Class A
Input Power
112W @ 120V
100PAR38, CDM100/PAR38/
100PAR38, CMH100PAR38/
100PAR38, MCP100PAR38/U/
Input Current
0.30A @ 277V
PD8P1003E
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Min. Starting Temp -30°C,
-22°F
Input Frequency 50/60 Hz
Power Factor > 0.99
THD < 10%
Input Voltage
347V ±10%
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Sound Rating Class A
Input Frequency 50/60 Hz
Power Factor > 0.99
Input Voltage
347V ±10%
Crest factor < 1.6
Ballast factor 1.00
THD < 10%
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
70PAR30L, CDM70/PAR30L/M/
70PAR30L, CMH70PAR30L/
70PAR30LN, MCP70PAR30LN/U/
70PAR38, CDM70/PAR38/
70PAR38, CMH70PAR38/
70PAR38, MCP70PAR38/U/
Input Power 80W
Input Current
0.23A @ 347V
100PAR38, CDM100/PAR38/
100PAR38, CMH100PAR38/
100PAR38, MCP100PAR38/U/
Input Frequency 50/60 Hz
Power Factor > 0.90
THD < 15%
Input Voltage
120V - 277V ±10%
Crest factor < 1.5
Ballast factor 1.00
Operating Frequency < 200 Hz
UL, CSA, EISA
Input Power
165W @ 120V
150PAR38, MCP150PAR38/U/
Input Power
161W @ 277
Input Current
1.4A @ 120V
Input Current
0.6A @ 277V
Input Current
0.96A @ 120V
Input Current
0.43A @ 277V
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits
Input Power
109W @ 277V
PD8P703E
Min. Starting Temp -30°C, -22°F
PD8P150E, PD8CPP150E
Min. Starting Temp -20°C, -4°F
PD8P1503E
Min. Starting Temp -30°C,
-22°F
Sound Rating Class A
EMI/RFI Emissions FCC 47CFR Part 18 Non-Consumer
Limits, Subparts C
Input Frequency 50/60 Hz
Power Factor > 0.99
THD < 10%
Input Voltage
347V ±10%
Crest factor < 1.6
Ballast factor 1.00
Operating Frequency 170 Hz
UL Listed, cUL Certified,
Class P, Type 1 Outdoor,
HL
Input Power 166W
150PAR38, MCP150PAR38/U/
Input Power 108W
Input Current
0.475A @ 347V
Input Current
0.31A @ 347V
O r d e r ing info r mation
SAMPLE NUMBER:: PD8P70E 80VC
O r d e r h o u s i n g , r e fl e c t o r a n d l a m p s e p a r a t e l y f o r a c o m p l e t e l u m i n a i r e .
Housing
PD8P = 8 Inch vertical E26
(protected) PAR metal halide
PD8CPP = 8 Inch vertical E26
(protected) PAR metal halide,
CCEA listed (Chicago Plenum)
Wattage / Ballast Option
Reflector
70E = 70W MH, M98, M139, 120V/277V
80V = 8” vertical
703E = 70W MH, M98, M139, 347V
100E = 100W MH, M90, M140, 120V/277V
1003E = 100W MH, M90, M140, 347V
150E = 150W MH, M102, M142, 120V/277V
1503E = 150W MH, M102, M142, 347V
Finish Option
C=Specular Clear
G=Specular Gold
H=Semi Specular Clear
W=White (White Flange)
BB=Black Baffle (White Flange)
WB=White Baffle (White Flange)
Flange Option
Blank=Polished Flange
(C, G, H)
Blank=White flange
(W, BB, WB)
WF=White Flange
(C, G, H)
Accessories
HB128APK = L channel
hanger bar,
26”, ‘No-Fuss’,
pair (replacement)
RMB22 = 22” long wood joist
mounting bars
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
www.cooperlighting.com
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049