505U-2 Wireless I/O TD032087EN One-way, low-power transmitter Description

Technical Data TD032087EN
Effective January 2014
505U-2 Wireless I/O
One-way, low-power transmitter
Description
The ELPRO 505U-2 Wireless I/O is a small I/O transmitter that
extends long-range, license-free communications to sensors in
local, remote, or difficult-to-reach locations. Designed for low power
consumption and easy attachment of ELPRO BU-5 battery packs, the
ELPRO 505U-2 provides reliable continuity for industrial applications
with power constraints.
Capable of transferring analog, pulse, or discrete inputs, and
powering a loop-powered analog device (12 Vdc, 50 mA), the
transmitter is highly reliable and simple to deploy.
Features
•
405–490 MHz frequency, up to 500 mW RF Power
•
Link process inputs to single or multiple outputs (peer-to-peer)
•
Multiple power supply options including battery-only
supply with ultra-low power consumption (reverts to sleep mode)
•
Input-only transmitter unit (2 DI/PI, 1 AI), connects to multi I/O
and/or gateway units
•
Peer-to-peer communications with exception reporting and
reliable self-checking via update time
•
External inputs plus internally calculated values, including analog
set point status, pulse rate and pulse total, power/battery supply
voltage, and power supply alarm
•
Configurable repeat transmissions to five times for message
reliability
Applications
•
High-level alarms
•
Security gate control
•
Emergency shower notification
•
Flow meter monitoring
•
Storage tank monitoring
•
Pipeline cathodic protection
•
Pump stop-start
•
Lighting bank control
•
Power reticulation relay-fault notifications
•
Weather station reporting
•
Bearing condition monitoring
Technical Data TD032087EN
505U-2 Wireless I/O


Effective January 2014
Specifications
Ordering
SPECIFICATION
DESCRIPTION
Transmitter and Receiver
Frequency
405–490 MHz a b
Transmit power
10 mW–500 mW
Transmission
Frequency modulation (FM)
Modulation
Digital frequency shift key (DFSK)
Channel spacing
12.5 kHz
Data rate
3600 bps
6.2 miles (10 km) @ 500 mW EIRP
Range (LOS) c
3.1 miles (5 km) @ 100 mW EIRP
1.2miles (2 km) @ 10 mW EIRP
Antenna connector
BNC female coaxial
Input and Output
Digital inputs
TTL voltage input, surge-protected, non-isolated, voltage-free/NPN contacts, 0.5 seconds debounce time,
2 DI (external, status)
Analog inputs
0–20 mA or 0–10 mA, floating differential inputs, common
mode voltage 15V, 12-bit resolution, <0.1% accuracy, 12 Vdc
@ 50 mA for external loops provided, transducer warm-up
time configurable up to 255 seconds
Pulse inputs
Per digital input specifications above, 100 Hz maximum pulse
rate, 3ms pulse width minimum, 2 PI (pulse total, count, rate)
Serial Port
RS-232
9-pin DB-9 female connector (use for programming only)
Data rate
9600 bps
Serial settings
8 data bits, 1 stop, no parity
Protocols and Configuration
System address
Configurable system address
Protocols supported
ELPRO WIBnetTM up to four retries, CRC error checking
User configuration
E-Series configuration utility
Configurable
Individual input mappings, analog and digital debounce,
parameters
analog sample time, analogue warm-up time, update time,
analog set points and sensitivities
Power management settings
LED Indication and Diagnostics
LED Indication
TX/radio; OK/operation
Refer to product manual for more information
Reported Diagnostics
I/O status
General
Size
6.7" x 2.5" x 1.4" (170 mm x 64 mm x 36 mm)
Housing
Powder-coated aluminum
Environmental
IP65
Mounting
Panel mount/connector and cable lead
Terminal blocks
Weatherproof connector included
Temperature rating
–4 to +140°F (–20 to +60°C)
Humidity rating
0–99% RH noncondensing
Weight
1 lb (500g)
Power Supply
Nominal supply
11.5 to 15 Vdc, over voltage/reverse power protection
Average current draw
10 mA @ 12 Vdc (idle) + analog loop current
Sleep mode 120 μA
Transmit current draw 170 mA @ 250 mW, 100 mA @ 100 mW, 50 mA @ 10 mW
Battery (Optional
6 x AA alkaline batteries 9V, up to 1.4-year service life
ELPRO BU5-2)
depending on input configuration
Enclosure specifications as per 505U-2 enclosure
Temperature dependent on battery type
PRODUCT CODE
505U-2-E
NNote: Power consumption is dependent on unit configuration.
a Specify RF power and Frequency at time of order
b RF Frequency configuration range is 2 MHz
c Line of sight radio range, can be extended with repeaters
2
eaton www.eaton.com
DESCRIPTION
FREQENCY
2 digital/pulse inputs plus one 405–490 MHz
analog input, external 12 VDC
power supply
RF POWER
500 mW
NNote: Specifications are subject to change.
Accessories
PRODUCT CODE
DESCRIPTION
Antennas 360–512 MHz
UDP400-C
400 MHz dipole antenna, N-type female,
2 dBi gain
UDP400-3
400 MHz dipole antenna, BNC male, 0 dBi gain,
9' (3m) coaxial cable
BU3-400
Collinear antenna, N-type female, 5 dBi gain
DATA SHEET
TD032037EN
TD032037EN
TD032038EN
BU6-400
Collinear Antenna, N-type female, 8 dBi gain
TD032039EN
YU3/6/9/16-400
Yagi antenna, 3/6/16 element, N-type,
10/9/12/15 dBi gain
TD032040EN
TD032041EN
TD032043EN
TD032044EN
Cables
CC3/10/20-SMA/BNC Coaxial cable kit, 9.8' (3m)/32' (10m)/65' (20m),
N-type to N-type, SMA male/BNC male
CCTAIL-SMA-F/M
CCTAIL-BNC-F/M
SER-DB9
Surge Diverters
CSD-SMA-2500
CSD-N-6000
MA15/D/1/S1
MA15/D/2/S1
IIOP32D
Power Supplies
BU5-2
PS-DINAC-12DC
PSG60E
Mounting Brackets
BR-YAGI-KIT
BR-COL-KIT
Coaxial cable tail, 24" (600 mm), SMA to N-type
(female/male)
Coaxial cable tail, 24” (600 mm), BNC to N-type
(female/male)
Serial RS-232 cable, DB-9 male to DB-9 female,
straight through
SMA surge diverter for use with
CC10/CC20-SMA
Coaxial surge diverter, bulkhead N-type
female to N-type female
Power supply surge diverter, 110 Vac/15A
Power supply surge diverter, 240 Vac/15A
Signal surge diverter, 2 x 2-wire/1 x 4-wire
TD032019EN
TD032020EN
TD032021EN
TD032023EN
TD032022EN
TD032026EN
TD032030EN
TD032031EN
TD032029EN
TD032032EN
IP66 battery pack
TD032035EN
DIN rail power supply, 100–250 Vac, 12 Vdc/2.5A TD032033EN
DIN rail power supply, 85–264 Vac, 24 Vdc/2.5A TD032034EN
Mounting bracket kit for Yagi antenna
Mounting bracket kit for collinear antenna
TD032072EN
TD032071EN
Technical Data TD032087EN
505U-2 Wireless I/O


Effective January 2014
Eaton’s wireless business
www.eaton.com/wireless
North America & Latin America
5735 W. Las Positas Suite 100
Pleasanton, CA 94588
United States
Telephone: +1 925 924 8500
Australia, New Zealand
9/12 Billabong Street
Stafford Queensland 4053
Australia
Telephone: +61 7 3352 8600
Southeast Asia
2 Serangoon North Avenue 5
# 06-01 Fu Yu Building, 554911
Singapore
Telephone: +65 6645 9888
Europe
Hein-Moeller-Straße 7-11
53115 Bonn, Germany
Telephone: +49 228 602 5573
China
955 Shengli Road
East Area of Zhangjiang High-Tech Park
Shanghai, 201201
China
Telephone: +86 21 2899 3600
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. TD032087EN
January 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.